Jéderson da Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jéderson da Silva has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Jucélio Tomás Pereira
Federal University of Paraná (UFPR)
7 shared publications Jucélio Tomás Pereira
Department of Mechanical Engineering, Federal University of Parana, Curitiba, Brazil
5 shared publications- Tiago Lima DE Sousa
CONEMI -Congresso Internacional de Engenharia Mecânica e Industrial Departamento de Engenharia Mecânica ( Departamento de Engenharia Mecânica ( Universidade Federal de Pernambuco (UFPE) Universidade Tecnológica Federal do Paraná (UTFPR)
4 shared publications Gabriela Wessling Oening Dicati
Universidade Federal do Paraná
2 shared publicationsJosé Eduardo Gubaua
Universidade Federal do Paraná
2 shared publications- Tiago Lima de Sousa
Federal University of Technology – Paraná (UTFPR), 330 Dr. Washington Subtil Chueire St., Ponta Grossa, Paraná, Brazil
2 shared publications
Latest Publications
- Open Access
- 24 April 2026
- Published by MathDoc/Centre Mersenne in Comptes Rendus Mécanique
- Vol. 354 (G1) , 397-416
Mathematical modeling of Poisson’s ratio and time-frequency interconversion of viscoelastic models based on the fractional Zener formulation
The proposed formulation, based on the four-parameter fractional Zener model, provides a versatile constitutive framework for describing the mechanical behavior of viscoelastic materials (VEMs). The central objective of this work is to theoretically and practically demonstrate that viscoelastic models identified in the time domain can be consistently transformed into their frequency-domain counterparts, and vice versa. The principal contribution lies in the development of a new mathematical model for the time-dependent Poisson’s ratio, formulated in the time domain and derived directly from the constitutive relations of the fractional Zener model. Artificial experimental datasets are employed to validate the effectiveness and internal consistency of the proposed interconversion methodology. Once the fractional parameters are identified through an optimization approach, the corresponding complex viscoelastic functions — namely, the complex Young’s modulus, complex shear modulus, and complex Poisson’s ratio — are obtained through analytical interconversion into the frequency domain. Overall, the proposed framework reinforces the theoretical foundation connecting time- and frequency-domain representations of viscoelastic behavior and advances the modeling and characterization of viscoelastic materials.
- 24 April 2026
- Published by MathDoc/Centre Mersenne in Comptes Rendus Mécanique
- Vol. 354 (G1) , 397-416
Open AccessMathematical modeling of Poisson’s ratio and time-frequency interconversion of viscoelastic models based on the fractional Zener formulation
The proposed formulation, based on the four-parameter fractional Zener model, provides a versatile constitutive framework for describing the mechanical behavior of viscoelastic materials (VEMs). The central objective of this work is to theoretically and practically demonstrate that viscoelastic models identified in the time domain can be consistently transformed into their frequency-domain counterparts, and vice versa. The principal contribution lies in the development of a new mathematical model for the time-dependent Poisson’s ratio, formulated in the time domain and derived directly from the constitutive relations of the fractional Zener model. Artificial experimental datasets are employed to validate the effectiveness and internal consistency of the proposed interconversion methodology. Once the fractional parameters are identified through an optimization approach, the corresponding complex viscoelastic functions — namely, the complex Young’s modulus, complex shear modulus, and complex Poisson’s ratio — are obtained through analytical interconversion into the frequency domain. Overall, the proposed framework reinforces the theoretical foundation connecting time- and frequency-domain representations of viscoelastic behavior and advances the modeling and characterization of viscoelastic materials.
- Open Access
- 27 January 2025
- Published by MathDoc/Centre Mersenne in Comptes Rendus Mécanique
- Vol. 353 (G1) , 309-320
Nomograms of solid linear viscoelastic materials in time and frequency domains
The mechanical behavior of isotropic solid viscoelastic material (VEM) can be described both in time or frequency domain considering temperature effects. Thus, one can make use of viscoelastic functions such as Young’s and/or shear moduli and the Poisson’s ratio. The viscoelastic dynamic behaviors in different temperature and frequency or time ranges can be grouped into a single graph, named nomogram. The present work proposes a method for constructing nomograms for viscoelastic functions, Young’s and shear relaxation moduli, and Poisson’s ratio, defined in the time domain. It also proposed a nomogram for the complex Poisson’s ratio in the frequency domain.
- 27 January 2025
- Published by MathDoc/Centre Mersenne in Comptes Rendus Mécanique
- Vol. 353 (G1) , 309-320
Open AccessNomograms of solid linear viscoelastic materials in time and frequency domains
The mechanical behavior of isotropic solid viscoelastic material (VEM) can be described both in time or frequency domain considering temperature effects. Thus, one can make use of viscoelastic functions such as Young’s and/or shear moduli and the Poisson’s ratio. The viscoelastic dynamic behaviors in different temperature and frequency or time ranges can be grouped into a single graph, named nomogram. The present work proposes a method for constructing nomograms for viscoelastic functions, Young’s and shear relaxation moduli, and Poisson’s ratio, defined in the time domain. It also proposed a nomogram for the complex Poisson’s ratio in the frequency domain.
- Open Access
- 1 January 2025
- Published by Even3 in Anais Do Congresso Internacional de Engenharia Mecânica E Industrial
- Vol. 1, 1
ANÁLISE DA CARACTERIZAÇÃO DE MATERIAIS VISCOELÁSTICOS COM A INCORPORAÇÃO PROGRESSIVA DE TERMOS DE PRONY NO MODELO DE MAXWELL GENERALIZADO
Materiais com comportamento viscoelástico combinam características elásticas e viscosas, desempenhando um papel fundamental no controle passivo de vibrações em muitos cenários do cotidiano. Exemplos notáveis incluem componentes como tetos de tratores, dinâmica de rotores nos eixos de alta rotação, bases de motores de combustão interna, portas de automóveis entre outros. Portanto, é crucial a caracterização precisa de modelos matemáticos que descrevam adequadamente o comportamento mecânico desses materiais viscoelásticos (MVEs). Um dos modelos constitutivos amplamente estudado é o Modelo de Maxwell Generalizado, que se baseia em derivadas de ordem inteira e utiliza séries de Prony. Neste estudo, exploramos a caracterização de MVEs considerando a inclusão gradual de termos de Prony, começando com 6 e aumentando para 8, 12, 16, 24 e 32 termos. Para tanto, emprega-se uma técnica híbrida de otimização que combina algoritmos genéticos sequenciado por programação não linear. Os resultados obtidos revelam que utilizando 16 termos de Prony é viável obter resultados satisfatórios. Isso é evidenciado pelos gráficos que mostram os ajustes teóricos aos dados experimentais, descrevendo o comportamento viscoelástico de forma eficaz. Os parâmetros viscoelásticos identificados podem ser valiosos para desenvolver futuras pesquisas sobre o desenvolvimento de dispositivos para controle passivo de vibração.
- 1 January 2025
- Published by Even3 in Anais Do Congresso Internacional de Engenharia Mecânica E Industrial
- Vol. 1, 1
Open AccessANÁLISE DA CARACTERIZAÇÃO DE MATERIAIS VISCOELÁSTICOS COM A INCORPORAÇÃO PROGRESSIVA DE TERMOS DE PRONY NO MODELO DE MAXWELL GENERALIZADO
Materiais com comportamento viscoelástico combinam características elásticas e viscosas, desempenhando um papel fundamental no controle passivo de vibrações em muitos cenários do cotidiano. Exemplos notáveis incluem componentes como tetos de tratores, dinâmica de rotores nos eixos de alta rotação, bases de motores de combustão interna, portas de automóveis entre outros. Portanto, é crucial a caracterização precisa de modelos matemáticos que descrevam adequadamente o comportamento mecânico desses materiais viscoelásticos (MVEs). Um dos modelos constitutivos amplamente estudado é o Modelo de Maxwell Generalizado, que se baseia em derivadas de ordem inteira e utiliza séries de Prony. Neste estudo, exploramos a caracterização de MVEs considerando a inclusão gradual de termos de Prony, começando com 6 e aumentando para 8, 12, 16, 24 e 32 termos. Para tanto, emprega-se uma técnica híbrida de otimização que combina algoritmos genéticos sequenciado por programação não linear. Os resultados obtidos revelam que utilizando 16 termos de Prony é viável obter resultados satisfatórios. Isso é evidenciado pelos gráficos que mostram os ajustes teóricos aos dados experimentais, descrevendo o comportamento viscoelástico de forma eficaz. Os parâmetros viscoelásticos identificados podem ser valiosos para desenvolver futuras pesquisas sobre o desenvolvimento de dispositivos para controle passivo de vibração.
- Open Access
- 1 January 2023
- Published by Even3 in Anais Do Congresso Internacional de Engenharia Mecânica E Industrial
- Vol. 1
ANÁLISE ESTATÍSTICA DE MODELOS VISCOELÁSTICOS FRACIONÁRIOS COM DIFERENTES ORDENS DE DIFERENCIAÇÃO NA CARACTERIZAÇÃO DE MATERIAIS VISCOELÁSTICOS
Anais do Congresso Internacional de Engenharia Mecânica e Industrial (2764-4294) - Análise Estatística De Modelos Viscoelásticos Fracionários Com Diferentes Ordens De Diferenciação Na Caracterização De Materiais Viscoelásticos
- 1 January 2023
- Published by Even3 in Anais Do Congresso Internacional de Engenharia Mecânica E Industrial
- Vol. 1
Open AccessANÁLISE ESTATÍSTICA DE MODELOS VISCOELÁSTICOS FRACIONÁRIOS COM DIFERENTES ORDENS DE DIFERENCIAÇÃO NA CARACTERIZAÇÃO DE MATERIAIS VISCOELÁSTICOS
Anais do Congresso Internacional de Engenharia Mecânica e Industrial (2764-4294) - Análise Estatística De Modelos Viscoelásticos Fracionários Com Diferentes Ordens De Diferenciação Na Caracterização De Materiais Viscoelásticos
- 1 January 2023
- Published by Even3 in Anais Do Congresso Internacional de Engenharia Mecânica E Industrial
- Vol. 1
PROJETO IDEAL DE SUSPENSÃO DE VEÍCULO EMPREGANDO TÉCNICAS HÍBRIDAS DE OTIMIZAÇÃO E ESTABELECENDO COMO UM CRITÉRIO DE PROJETO A ACELERAÇÃO VERTICAL MÍNIMA TRANSMITIDA PARA O MOTORISTA PARA MELHOR CONFORTO
Anais do Congresso Internacional de Engenharia Mecânica e Industrial (2764-4294) - Projeto Ideal De Suspensão De Veículo Empregando Técnicas Híbridas De Otimização E Estabelecendo Como Um Critério De Projeto A Aceleração Vertical Mínima Transmitida Para O Motorista Para Melhor Conforto
- 1 January 2023
- Published by Even3 in Anais Do Congresso Internacional de Engenharia Mecânica E Industrial
- Vol. 1
PROJETO IDEAL DE SUSPENSÃO DE VEÍCULO EMPREGANDO TÉCNICAS HÍBRIDAS DE OTIMIZAÇÃO E ESTABELECENDO COMO UM CRITÉRIO DE PROJETO A ACELERAÇÃO VERTICAL MÍNIMA TRANSMITIDA PARA O MOTORISTA PARA MELHOR CONFORTO
Anais do Congresso Internacional de Engenharia Mecânica e Industrial (2764-4294) - Projeto Ideal De Suspensão De Veículo Empregando Técnicas Híbridas De Otimização E Estabelecendo Como Um Critério De Projeto A Aceleração Vertical Mínima Transmitida Para O Motorista Para Melhor Conforto
- 12 December 2021
- Published by IOP Publishing in Medical Engineering & Physics
- Vol. 99 (1) , 103739
Techniques for mitigating the checkerboard formation: application in bone remodeling simulations
The checkerboard phenomenon is a numerical problem that can occur in bone remodeling simulations. This phenomenon degrades the quality of the results and emphasizes a strong mesh dependency. The node-based approach is a well-used method for solving this problem. However, this method does not provide a stable solution, and long-time simulations do not reach steady-state. This paper aims to discuss techniques for mitigating the checkerboard formation and obtaining bone characterization. For this, we apply the simple nodal average technique on stress, density, or both simultaneously. Then, we compare the element-based and node-based approaches with and without smoothing. Also, we introduced a quantification parameter called standard density variation. This parameter measures the intensity of the checkerboard formation and analyzes the evolution of the bone tissue behavior. The application of the smoothing techniques mitigates the checkerboard formation. Also, the application allows obtaining a stable behavior for long-time simulations. The standard density variation allowed visualizing this stable behavior. In particular, the stress field smoothing technique provides the best results. Besides the stabilization and checkerboard control, the technique allows obtaining a physiological density distribution.
- 12 December 2021
- Published by IOP Publishing in Medical Engineering & Physics
- Vol. 99 (1) , 103739
Techniques for mitigating the checkerboard formation: application in bone remodeling simulations
The checkerboard phenomenon is a numerical problem that can occur in bone remodeling simulations. This phenomenon degrades the quality of the results and emphasizes a strong mesh dependency. The node-based approach is a well-used method for solving this problem. However, this method does not provide a stable solution, and long-time simulations do not reach steady-state. This paper aims to discuss techniques for mitigating the checkerboard formation and obtaining bone characterization. For this, we apply the simple nodal average technique on stress, density, or both simultaneously. Then, we compare the element-based and node-based approaches with and without smoothing. Also, we introduced a quantification parameter called standard density variation. This parameter measures the intensity of the checkerboard formation and analyzes the evolution of the bone tissue behavior. The application of the smoothing techniques mitigates the checkerboard formation. Also, the application allows obtaining a stable behavior for long-time simulations. The standard density variation allowed visualizing this stable behavior. In particular, the stress field smoothing technique provides the best results. Besides the stabilization and checkerboard control, the technique allows obtaining a physiological density distribution.
- 6 May 2020
- Published by Emerald Publishing in Engineering Computations
- Vol. 37 (9) , 3209-3241
h-adaptive topology optimization considering variations of material properties and energy error density recovery
Purpose: The purpose of this paper is to propose a new scheme for obtaining acceptable solutions for problems of continuum topology optimization of structures, regarding the distribution and limitation of discretization errors by considering h-adaptivity. Design/methodology/approach: The new scheme encompasses, simultaneously, the solution of the optimization problem considering a solid isotropic microstructure with penalization (SIMP) and the application of the h-adaptive finite element method. An analysis of discretization errors is carried out using an a posteriori error estimator based on both the recovery and the abrupt variation of material properties. The estimate of new element sizes is computed by a new h-adaptive technique named “Isotropic Error Density Recovery”, which is based on the construction of the strain energy error density function together with the analytical solution of an optimization problem at the element level. Findings: Two-dimensional numerical examples, regarding minimization of the structure compliance and constraint over the material volume, demonstrate the capacity of the methodology in controlling and equidistributing discretization errors, as well as obtaining a great definition of the void–material interface, thanks to the h-adaptivity, when compared with results obtained by other methods based on microstructure. Originality/value: This paper presents a new technique to design a mesh made with isotropic triangular finite elements. Furthermore, this technique is applied to continuum topology optimization problems using a new iterative scheme to obtain solutions with controlled discretization errors, measured in terms of the energy norm, and a great resolution of the material boundary. Regarding the computational cost in terms of degrees of freedom, the present scheme provides approximations with considerable less error if compared to the optimization process on fixed meshes.
- 6 May 2020
- Published by Emerald Publishing in Engineering Computations
- Vol. 37 (9) , 3209-3241
h-adaptive topology optimization considering variations of material properties and energy error density recovery
Purpose: The purpose of this paper is to propose a new scheme for obtaining acceptable solutions for problems of continuum topology optimization of structures, regarding the distribution and limitation of discretization errors by considering h-adaptivity. Design/methodology/approach: The new scheme encompasses, simultaneously, the solution of the optimization problem considering a solid isotropic microstructure with penalization (SIMP) and the application of the h-adaptive finite element method. An analysis of discretization errors is carried out using an a posteriori error estimator based on both the recovery and the abrupt variation of material properties. The estimate of new element sizes is computed by a new h-adaptive technique named “Isotropic Error Density Recovery”, which is based on the construction of the strain energy error density function together with the analytical solution of an optimization problem at the element level. Findings: Two-dimensional numerical examples, regarding minimization of the structure compliance and constraint over the material volume, demonstrate the capacity of the methodology in controlling and equidistributing discretization errors, as well as obtaining a great definition of the void–material interface, thanks to the h-adaptivity, when compared with results obtained by other methods based on microstructure. Originality/value: This paper presents a new technique to design a mesh made with isotropic triangular finite elements. Furthermore, this technique is applied to continuum topology optimization problems using a new iterative scheme to obtain solutions with controlled discretization errors, measured in terms of the energy norm, and a great resolution of the material boundary. Regarding the computational cost in terms of degrees of freedom, the present scheme provides approximations with considerable less error if compared to the optimization process on fixed meshes.
- 10 December 2018
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 44 (6) , 5613-5630
Anisotropic Mesh Refinement Considering a Recovery-Based Error Estimator and Metric Tensors
- 10 December 2018
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 44 (6) , 5613-5630
Anisotropic Mesh Refinement Considering a Recovery-Based Error Estimator and Metric Tensors
- Open Access
- 27 August 2018
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 15 (9)
Indirect Identification of the Complex Poisson's Ratio in Fractional Viscoelasticity
The use of viscoelastic materials (VEMs) has becoming more and more frequent both as vibration control in general or as parts of structural components. In all applications, the mechanical behavior of such materials can be predicted by the complex moduli (Young’s, shear or volumetric) and the complex Poisson’s ratio. Over recent decades, various methodologies have been presented aiming at characterizing complex moduli. On the other hand, the indirect identification of the Poisson’s ratio, in the frequency domain, proves to be underexplored. The present paper discusses two computational methodologies in order to obtain, indirectly, the complex Poisson’s ratio in linear and thermorheologically simple solid VEMs. The first of them uses a traditional methodology, which individually identifies the complex Young’s and the shear moduli and, from them, one obtains the complex Poisson’s ratio. The second methodology - proposed in the present paper and called ‘integrated’ - obtains the complex Poisson’s ratio through a simultaneous identification of those two complex moduli. Both methodologies start from a set of experimental points of the complex moduli in the frequency domain, carried out at different temperatures. From those points, a hybrid optimization technique is applied (Genetic Algorithms and Non-Linear Programming) in order to obtain the parameters of the constitutive models for the VEM under analysis. For the experiments described here, the integrated methodology proves to be very promising and with a great application potential.
- 27 August 2018
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 15 (9)
Open AccessIndirect Identification of the Complex Poisson's Ratio in Fractional Viscoelasticity
The use of viscoelastic materials (VEMs) has becoming more and more frequent both as vibration control in general or as parts of structural components. In all applications, the mechanical behavior of such materials can be predicted by the complex moduli (Young’s, shear or volumetric) and the complex Poisson’s ratio. Over recent decades, various methodologies have been presented aiming at characterizing complex moduli. On the other hand, the indirect identification of the Poisson’s ratio, in the frequency domain, proves to be underexplored. The present paper discusses two computational methodologies in order to obtain, indirectly, the complex Poisson’s ratio in linear and thermorheologically simple solid VEMs. The first of them uses a traditional methodology, which individually identifies the complex Young’s and the shear moduli and, from them, one obtains the complex Poisson’s ratio. The second methodology - proposed in the present paper and called ‘integrated’ - obtains the complex Poisson’s ratio through a simultaneous identification of those two complex moduli. Both methodologies start from a set of experimental points of the complex moduli in the frequency domain, carried out at different temperatures. From those points, a hybrid optimization technique is applied (Genetic Algorithms and Non-Linear Programming) in order to obtain the parameters of the constitutive models for the VEM under analysis. For the experiments described here, the integrated methodology proves to be very promising and with a great application potential.