Malgorzata Anita Bryszewska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Malgorzata Anita Bryszewska has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Agata Łącka
Institute of General Food Chemistry, Faculty of Biotechnology and Food Sciences , Technical University of Lodz , 4/10 Stefanowskiego Street, 90-924 , Lodz , Poland
3 shared publications - Joanna Leszczyńska
Institute of Natural Products and Cosmetics, Faculty of Biotechnology and Food Sciences, Łódź University of Technology, Stefanowskiego 2/22, 90-537 Łódź, Poland
3 shared publications Wojciech Ambroziak
Institute of Fermentation Technology and Microbiology , Technical University of Lodz , 171/173 Wolczanska Str., 90-924, Lodz, Poland
3 shared publications- Andrea Gianotti
DISTAL, Department of Agricultural and Food Sciences, Alma Mater Studiorum - Università di Bologna, V.le Fanin 42, 40135 Bologna, Italy; CIRI-AGRO, Interdepartmental Centre of Agri-Food Industrial Research, Alma Mater Studiorum - Università di Bologna, P.zza Goidanich 60, 47522 Cesena, Italy
2 shared publications - Anna Diowksz
Institute of Fermentation Technology and Microbiology, Faculty of Biotechnology and Food Sciences, Lodz University of Technology, 90-530 Lodz, Poland
2 shared publications - Piotr Dziugan
Department of Environmental Biotechnology, Faculty of Biotechnology and Food Sciences, Lodz University of Technology, Wolczanska 171/173, 90-530 Lodz, Poland
2 shared publications
Latest Publications
- Open Access
Valorization of Arnold Fir Seeds and Cones: Composition of Essential Oils, Their Biological Activity and the Potential of Extracts
Essential oils (EOs) of attractive scent from the seeds and cones of Abies × arnoldiana were investigated for the first time, revealing a more than ninefold higher yield from seeds (4.40%) than from cones (0.45%) and distinct terpene profiles. Monoterpene hydrocarbons predominated in both EOs, while the cone oil exhibited greater chemical diversity and a higher proportion of oxygenated monoterpenes (up to 40.9%); the seed oil was characterized mainly by α- and β-pinene, camphene, limonene, as well as bornyl acetate, whereas α- and β-pinene accounted for more than half of the cone EO, with only 38% of constituents shared between the oils. A clear predominance of levorotatory (−) monoterpene enantiomers was observed in both oils; the enantiomeric excess ranged from 88.2% to 100%, and for several compounds, the (+) form was completely absent. Both EOs exhibited bactericidal activity against Staphylococcus aureus and Escherichia coli and cytotoxic effects against normal skin and melanoma cells comparable to thymol, while non-cytotoxic concentrations did not impair collagen biosynthesis in fibroblasts; additionally, seed and cone extracts contained valuable bioactive compounds, including unsaturated fatty acids, tocopherols and phytosterols, highlighting Arnold fir, particularly its seeds, as a promising raw material for cosmetic and other biotechnological applications.
Open AccessValorization of Arnold Fir Seeds and Cones: Composition of Essential Oils, Their Biological Activity and the Potential of Extracts
Essential oils (EOs) of attractive scent from the seeds and cones of Abies × arnoldiana were investigated for the first time, revealing a more than ninefold higher yield from seeds (4.40%) than from cones (0.45%) and distinct terpene profiles. Monoterpene hydrocarbons predominated in both EOs, while the cone oil exhibited greater chemical diversity and a higher proportion of oxygenated monoterpenes (up to 40.9%); the seed oil was characterized mainly by α- and β-pinene, camphene, limonene, as well as bornyl acetate, whereas α- and β-pinene accounted for more than half of the cone EO, with only 38% of constituents shared between the oils. A clear predominance of levorotatory (−) monoterpene enantiomers was observed in both oils; the enantiomeric excess ranged from 88.2% to 100%, and for several compounds, the (+) form was completely absent. Both EOs exhibited bactericidal activity against Staphylococcus aureus and Escherichia coli and cytotoxic effects against normal skin and melanoma cells comparable to thymol, while non-cytotoxic concentrations did not impair collagen biosynthesis in fibroblasts; additionally, seed and cone extracts contained valuable bioactive compounds, including unsaturated fatty acids, tocopherols and phytosterols, highlighting Arnold fir, particularly its seeds, as a promising raw material for cosmetic and other biotechnological applications.
- Open Access
- 25 August 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (17) , 7652
Renewable Energy Sources and Improved Energy Management as a Path to Energy Transformation: A Case Study of a Vodka Distillery in Poland
The increasing awareness of the need for sustainable solutions to secure future energy supplies has spurred the search for innovative approaches. Energo-Efekt Sp. z o.o. has prepared a project for the green transformation of the energy system at a producer of spirits through the rectification of raw alcohol. An installation was conceptualised to develop the system to convert energy from biomass fuels into electricity and heat. The innovation of the installation is the use of an expander—a Heliex system which is the twin-screw turbine generator converting energy in the form of wet steam into electrical power integrated with pressure-reducing valve. This system captures all or part of the available steam flow and reduces the steam pressure, not only delivering steam at the same, lower pressure but also generating rotary energy that can be used to produce electricity with the power output range of 160 to 600 kWe. Currently, the company utilises natural gas as a fuel source and acquires electricity from the external grid. Implementing the system could reduce the carbon footprint associated with the production of vodka at the plant by 97%, to 102 t CO2 annually. This reduction would account for approximately 21% of the total carbon footprint of the entire alcohol production process. The system could also be applied to other low-power systems that produce < 250 kW, making it a viable option for use in distributed energy networks, and can be used as a model solution for other distillery plants. The transformation project dedicated to Polmos Żyrardów involves a comprehensive change in both the energy source and its management. The fossil fuels used until now are being replaced with a renewable energy source in the form of biomass. The steam and electricity cogeneration system meets the rectification process’s energy demand and can supply the central heating node. Heat recovery exchangers recuperate heat from the boiler room exhaust gases and the rectification cooling process. Potentially, all of these changes lead to the company’s energy self-sufficiency and reduce its overall environmental impact with almost zero CO2 emissions.
- 25 August 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (17) , 7652
Open AccessRenewable Energy Sources and Improved Energy Management as a Path to Energy Transformation: A Case Study of a Vodka Distillery in Poland
The increasing awareness of the need for sustainable solutions to secure future energy supplies has spurred the search for innovative approaches. Energo-Efekt Sp. z o.o. has prepared a project for the green transformation of the energy system at a producer of spirits through the rectification of raw alcohol. An installation was conceptualised to develop the system to convert energy from biomass fuels into electricity and heat. The innovation of the installation is the use of an expander—a Heliex system which is the twin-screw turbine generator converting energy in the form of wet steam into electrical power integrated with pressure-reducing valve. This system captures all or part of the available steam flow and reduces the steam pressure, not only delivering steam at the same, lower pressure but also generating rotary energy that can be used to produce electricity with the power output range of 160 to 600 kWe. Currently, the company utilises natural gas as a fuel source and acquires electricity from the external grid. Implementing the system could reduce the carbon footprint associated with the production of vodka at the plant by 97%, to 102 t CO2 annually. This reduction would account for approximately 21% of the total carbon footprint of the entire alcohol production process. The system could also be applied to other low-power systems that produce < 250 kW, making it a viable option for use in distributed energy networks, and can be used as a model solution for other distillery plants. The transformation project dedicated to Polmos Żyrardów involves a comprehensive change in both the energy source and its management. The fossil fuels used until now are being replaced with a renewable energy source in the form of biomass. The steam and electricity cogeneration system meets the rectification process’s energy demand and can supply the central heating node. Heat recovery exchangers recuperate heat from the boiler room exhaust gases and the rectification cooling process. Potentially, all of these changes lead to the company’s energy self-sufficiency and reduce its overall environmental impact with almost zero CO2 emissions.
- Open Access
- 23 December 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (24) , 13746
SCOBY Cellulose-Based Materials Hydrophobized Using Stearic Acid and Apple Powder
Bacterial cellulose (BC) is a subject of interest for researchers due to its advantageous characteristics, including a straightforward manufacturing process, biocompatibility, and extensive modification potential. The hydrophilic nature of the material is beneficial in some applications, yet a limiting factor in others. This study aimed to develop BC-based materials with goFogureod moisture resistance. The modification of bacterial cellulose (BC) using apple powder, stearic acid, or a combination of these modifiers resulted in the formation of a range of materials, some of which had their surfaces additionally functionalised by coating with a mixture of apple powder and stearic acid (HSt). The nature and type of changes were confirmed by FTIR and theoretical analysis, which was conducted by modelling the interaction between cellulose and homogalacturonan or rhamnogalacturonan using SCIGRESS v.FJ 2.7 software. Changes in hydrogen bonding resulting in a weakening of the interactions between cellulose and water in the presence of pectin were demonstrated by both empirical data and modelling. The effectiveness of BC functionalisation was confirmed by material wettability. The water contact angle changed from 38° for the unmodified material to 125° for the material obtained by modification of the bacterial cellulose with glycerol followed by modification with a mixture of HSt at a concentration of 10% and AP at a concentration of 60%. The modifications produced a material with a robust hydrophobic surface. The results suggest that the surface roughness may not be the primary factor influencing the hydrophilicity or hydrophobicity of these materials but that it is more likely to be related to the interactions of components. None of the tested materials demonstrated antimicrobial activity against Escherichia coli, Bacillus subtilis, Staphylococcus aureus, Aspergillus niger, or Candida albicans.
- 23 December 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (24) , 13746
Open AccessSCOBY Cellulose-Based Materials Hydrophobized Using Stearic Acid and Apple Powder
Bacterial cellulose (BC) is a subject of interest for researchers due to its advantageous characteristics, including a straightforward manufacturing process, biocompatibility, and extensive modification potential. The hydrophilic nature of the material is beneficial in some applications, yet a limiting factor in others. This study aimed to develop BC-based materials with goFogureod moisture resistance. The modification of bacterial cellulose (BC) using apple powder, stearic acid, or a combination of these modifiers resulted in the formation of a range of materials, some of which had their surfaces additionally functionalised by coating with a mixture of apple powder and stearic acid (HSt). The nature and type of changes were confirmed by FTIR and theoretical analysis, which was conducted by modelling the interaction between cellulose and homogalacturonan or rhamnogalacturonan using SCIGRESS v.FJ 2.7 software. Changes in hydrogen bonding resulting in a weakening of the interactions between cellulose and water in the presence of pectin were demonstrated by both empirical data and modelling. The effectiveness of BC functionalisation was confirmed by material wettability. The water contact angle changed from 38° for the unmodified material to 125° for the material obtained by modification of the bacterial cellulose with glycerol followed by modification with a mixture of HSt at a concentration of 10% and AP at a concentration of 60%. The modifications produced a material with a robust hydrophobic surface. The results suggest that the surface roughness may not be the primary factor influencing the hydrophilicity or hydrophobicity of these materials but that it is more likely to be related to the interactions of components. None of the tested materials demonstrated antimicrobial activity against Escherichia coli, Bacillus subtilis, Staphylococcus aureus, Aspergillus niger, or Candida albicans.
- Open Access
- 5 January 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (2) , 1005
SCOBY Cellulose Modified with Apple Powder—Biomaterial with Functional Characteristics
The need for new non-animal and non-petroleum-based materials is strongly emphasized in the sustainable and green economy. Waste materials have proven a valuable resource in this regard. In fact, there have been quite a large number of goods obtained from wastes called “Vegan leather” that have gained the clothing market’s attention in recent years. In practice, they are mostly composites of waste materials like cactus, pineapples, or, eventually, apples with polymers like polyurethane or polyvinyl chloride. The article presents the results of work aimed at obtaining a material based entirely on natural, biodegradable raw materials. Bacterial cellulose produced as a byproduct of the fermentation carried out by SCOBY was modified with glycerol and then altered by the entrapment of apple powder. The effect of introducing apple powder into the SCOBY culture media on the mechanical properties of the obtained bacterial cellulose was also evaluated The resulting material acquired new mechanical characteristics that are advantageous in terms of strength. Microscopic observation of the apple powder layer showed that the coverage was uniform. Different amounts of apple powder were used to cover the cellulose surface from 10 to 60%, and it was found that the variant with 40% of this powder was the most favorable in terms of mechanical strength. Also, the application of the created material as a card folder showed that it is durable in use and retains its functional characteristics for at least 1 month. The mechanical properties of modified bacterial cellulose were favorably affected by the entrapment of apple powder on its surface, and as a result, a novel material with functional characteristics was obtained.
- 5 January 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (2) , 1005
Open AccessSCOBY Cellulose Modified with Apple Powder—Biomaterial with Functional Characteristics
The need for new non-animal and non-petroleum-based materials is strongly emphasized in the sustainable and green economy. Waste materials have proven a valuable resource in this regard. In fact, there have been quite a large number of goods obtained from wastes called “Vegan leather” that have gained the clothing market’s attention in recent years. In practice, they are mostly composites of waste materials like cactus, pineapples, or, eventually, apples with polymers like polyurethane or polyvinyl chloride. The article presents the results of work aimed at obtaining a material based entirely on natural, biodegradable raw materials. Bacterial cellulose produced as a byproduct of the fermentation carried out by SCOBY was modified with glycerol and then altered by the entrapment of apple powder. The effect of introducing apple powder into the SCOBY culture media on the mechanical properties of the obtained bacterial cellulose was also evaluated The resulting material acquired new mechanical characteristics that are advantageous in terms of strength. Microscopic observation of the apple powder layer showed that the coverage was uniform. Different amounts of apple powder were used to cover the cellulose surface from 10 to 60%, and it was found that the variant with 40% of this powder was the most favorable in terms of mechanical strength. Also, the application of the created material as a card folder showed that it is durable in use and retains its functional characteristics for at least 1 month. The mechanical properties of modified bacterial cellulose were favorably affected by the entrapment of apple powder on its surface, and as a result, a novel material with functional characteristics was obtained.
- Open Access
- 15 November 2022
- Published by MDPI AG in Education Sciences
- Vol. 12 (11) , 816
An Analysis of the Production Process of the Care Cosmetic Line Using Problem-Based Learning Tools
A batch of a new product designed by the research and development department was prepared at a private label of a Polish cosmetics company. The product was transferred to the warehouse with no indication of when it would be given to a supplier. A student starting her internship in the factory wondered why the date of delivery for distribution was not indicated. To study this problem, an analysis of the production process was carried out using the tools of the problem-based learning method. SWOT analysis, a flowchart, a questionnaire and an Ishikawa diagram were used as tools for evaluation of the production process of the work of departments involved in the production of one cosmetics line. Analyses and surveys conducted by the observer as well as feedback from employees identified several problems. Among them, poor planning was selected as the so-called specific problem, i.e., the one to which special attention was paid and solutions for which were suggested. Planning with a longer time horizon would allow the preparation of production and the logistics departments to adjust the production line by separating it from other cosmetics, thus avoiding disruptions and interruptions in production in general. Suggestions also included changing or expanding a malfunctioning enterprise resource planning (EPR) system used to manage the organization that does not organize work properly and even delays it.
- 15 November 2022
- Published by MDPI AG in Education Sciences
- Vol. 12 (11) , 816
Open AccessAn Analysis of the Production Process of the Care Cosmetic Line Using Problem-Based Learning Tools
A batch of a new product designed by the research and development department was prepared at a private label of a Polish cosmetics company. The product was transferred to the warehouse with no indication of when it would be given to a supplier. A student starting her internship in the factory wondered why the date of delivery for distribution was not indicated. To study this problem, an analysis of the production process was carried out using the tools of the problem-based learning method. SWOT analysis, a flowchart, a questionnaire and an Ishikawa diagram were used as tools for evaluation of the production process of the work of departments involved in the production of one cosmetics line. Analyses and surveys conducted by the observer as well as feedback from employees identified several problems. Among them, poor planning was selected as the so-called specific problem, i.e., the one to which special attention was paid and solutions for which were suggested. Planning with a longer time horizon would allow the preparation of production and the logistics departments to adjust the production line by separating it from other cosmetics, thus avoiding disruptions and interruptions in production in general. Suggestions also included changing or expanding a malfunctioning enterprise resource planning (EPR) system used to manage the organization that does not organize work properly and even delays it.
- Open Access
Biochars from Post-Production Biomass and Waste from Wood Management: Analysis of Carbonization Products
Waste biomass can be used as an alternative source of energy. However, such use requires prior treatment of the material. This paper describes the physicochemical characteristics of biochar obtained by the thermochemical decomposition of six types of agricultural waste biomass: residues from the production of flavored spirits (a pulp of lime, grapefruit and lemon), beetroot pulp, apple pomace, brewer’s spent grain, bark and municipal solid waste (bark, sawdust, off-cuts and wood chips). The biomass conversion process was studied under conditions of limited oxygen access in a reactor. The temperature was raised from 450 to 850 °C over 30 min, followed by a residence time of 60 min. The solid products were characterized in terms of their elemental compositions, mass, energy yield and ash content. The gaseous products from pyrolysis of the biomass were also analyzed and their compositions were characterized by GCMS (Gas Chromatography–Mass Spectrometry). The carbonization process increased the carbon content by, on average, 1.7 times, from an average percentage of 46.09% ± 3.65% for biomass to an average percentage of 74.72% ± 5.36% for biochars. After carbonization, the biochars were found to have a net calorific value of between 27 and 32 MJ/kg, which is comparable or even higher than good-quality coal (eco pea coal 24–26 MJ/kg). The net calorific values show that the volatile products can also be considered as a valuable source of energy.
Open AccessBiochars from Post-Production Biomass and Waste from Wood Management: Analysis of Carbonization Products
Waste biomass can be used as an alternative source of energy. However, such use requires prior treatment of the material. This paper describes the physicochemical characteristics of biochar obtained by the thermochemical decomposition of six types of agricultural waste biomass: residues from the production of flavored spirits (a pulp of lime, grapefruit and lemon), beetroot pulp, apple pomace, brewer’s spent grain, bark and municipal solid waste (bark, sawdust, off-cuts and wood chips). The biomass conversion process was studied under conditions of limited oxygen access in a reactor. The temperature was raised from 450 to 850 °C over 30 min, followed by a residence time of 60 min. The solid products were characterized in terms of their elemental compositions, mass, energy yield and ash content. The gaseous products from pyrolysis of the biomass were also analyzed and their compositions were characterized by GCMS (Gas Chromatography–Mass Spectrometry). The carbonization process increased the carbon content by, on average, 1.7 times, from an average percentage of 46.09% ± 3.65% for biomass to an average percentage of 74.72% ± 5.36% for biochars. After carbonization, the biochars were found to have a net calorific value of between 27 and 32 MJ/kg, which is comparable or even higher than good-quality coal (eco pea coal 24–26 MJ/kg). The net calorific values show that the volatile products can also be considered as a valuable source of energy.
- Open Access
Comparison Study of Iron Bioaccessibility from Dietary Supplements and Microencapsulated Preparations
Iron deficiency is the most common form of malnutrition. Factors responsible for this so-called “hidden hunger” include poor diet, increased micronutrient needs and health problems such as diseases and infections. Body iron status can be increased by the intake of dietary supplements and fortified food. The aim of the present study was to compare iron bioaccessibility from commercial nutritional supplements and iron microcapsules. A comparison study was performed under conditions mimicking gastric and gastrointestinal digestion. A preparation of encapsulated ferrous sulphate or lactate and vitamin C, in a formula, showed bioaccessibility factors of up to 100% when digested individually, and around 60% in the presence of a food matrix. The degree of oxidation of the ferrous ions differed, depending on the type of preparation, the presence of vitamin C and the food matrix. The highest percentage content of ferrous ion, in the soluble fractions after gastrointestinal digestion, was shown by the preparation containing microencapsulated ferrous lactate or ferrous sulphate and vitamin C. Encapsulation seems to limit the interaction of iron with the food matrix and protect it against oxidation, thus making it more accessible for intestinal uptake.
Open AccessComparison Study of Iron Bioaccessibility from Dietary Supplements and Microencapsulated Preparations
Iron deficiency is the most common form of malnutrition. Factors responsible for this so-called “hidden hunger” include poor diet, increased micronutrient needs and health problems such as diseases and infections. Body iron status can be increased by the intake of dietary supplements and fortified food. The aim of the present study was to compare iron bioaccessibility from commercial nutritional supplements and iron microcapsules. A comparison study was performed under conditions mimicking gastric and gastrointestinal digestion. A preparation of encapsulated ferrous sulphate or lactate and vitamin C, in a formula, showed bioaccessibility factors of up to 100% when digested individually, and around 60% in the presence of a food matrix. The degree of oxidation of the ferrous ions differed, depending on the type of preparation, the presence of vitamin C and the food matrix. The highest percentage content of ferrous ion, in the soluble fractions after gastrointestinal digestion, was shown by the preparation containing microencapsulated ferrous lactate or ferrous sulphate and vitamin C. Encapsulation seems to limit the interaction of iron with the food matrix and protect it against oxidation, thus making it more accessible for intestinal uptake.
- Open Access
Bioavailability of Microencapsulated Iron from Fortified Bread Assessed Using Piglet Model
The aim of this study was to investigate the influence of oral iron supplementation, in the form of fortified breads, on the growth performance, health, iron status parameters, and fecal metabolome of anemic piglets. A study was conducted on 24 hybrid (Large White × Landrace × Duroc) piglets. From day 44, the post-natal 12 piglets were supplemented with 100 g of one of two experimental breads, each fortified with 21 mg of ferrous sulphate, either encapsulated or not. After one week of oral supplementation, hematological parameters (hematocrit value, hemoglobin, and red blood cells) showed statistically significant differences (p ≤ 0.05). Piglets fed with the fortified breads had higher iron concentrations in the heart, liver, and intestinal mucosa compared to anemic piglets fed with control bread. Gene expression of hepcidin, iron exporter ferroportin (IREG1), and divalent metal transporter 1 (DMT1), together with concentrations of plasma ferritin, showed no significant statistical differences between groups. Both fortified breads could be used as sources of bioavailable iron. The seven-day intervention trial showed microencapsulation to have only a mild effect on the effectiveness of iron supplementation in the form of fortified bread.
Open AccessBioavailability of Microencapsulated Iron from Fortified Bread Assessed Using Piglet Model
The aim of this study was to investigate the influence of oral iron supplementation, in the form of fortified breads, on the growth performance, health, iron status parameters, and fecal metabolome of anemic piglets. A study was conducted on 24 hybrid (Large White × Landrace × Duroc) piglets. From day 44, the post-natal 12 piglets were supplemented with 100 g of one of two experimental breads, each fortified with 21 mg of ferrous sulphate, either encapsulated or not. After one week of oral supplementation, hematological parameters (hematocrit value, hemoglobin, and red blood cells) showed statistically significant differences (p ≤ 0.05). Piglets fed with the fortified breads had higher iron concentrations in the heart, liver, and intestinal mucosa compared to anemic piglets fed with control bread. Gene expression of hepcidin, iron exporter ferroportin (IREG1), and divalent metal transporter 1 (DMT1), together with concentrations of plasma ferritin, showed no significant statistical differences between groups. Both fortified breads could be used as sources of bioavailable iron. The seven-day intervention trial showed microencapsulation to have only a mild effect on the effectiveness of iron supplementation in the form of fortified bread.
- 1 January 2015
- Published by Elsevier in Journal of Trace Elements in Medicine and Biology
- Vol. 29, 91-98
Determination of selenium and its compounds in marine organisms
- 1 January 2015
- Published by Elsevier in Journal of Trace Elements in Medicine and Biology
- Vol. 29, 91-98
Determination of selenium and its compounds in marine organisms