Rita Vecchiattini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rita Vecchiattini has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Carlo Battini
University of Genoa
5 shared publications - Chiara Calderini
University of Genoa, Genoa, Liguria, Italy
2 shared publications - Margherita Valentini
Department of Architecture and Design—DAD, University of Genoa, 16123 Genoa, Italy
2 shared publications - Andrea Rapuzzi
A-SIGN Srl, 16123 Genoa, Italy
1 shared publication - Antroula Georgiou
Faculty of Civil Engineering and Architecture, Carinthia University of Applied Sciences, Europastraße 4, 9524 Villach, Austria
1 shared publication - Barbara Lubelli
Department of Architectural Engineering and Technology, Faculty of Architecture and the Built Environment, Delft University of Technology, 2628 CD Delft, The Netherlands
1 shared publication
Latest Publications
- Open Access
From Executive Design to Heritage Site: Preliminary Development of an Application for Integrating Information on the State of Conservation Within an HBIM Model
In conservation work on historic built heritage, the transition from executive design to the worksite often requires the verification, integration and updating of information acquired during the design phase. This issue is particularly relevant for the documentation of the state of conservation since new accessibility conditions on site may allow previously unreadable areas to be observed and decay maps to be revised. This paper presents the preliminary development and testing of SMAT, an iPadOS application designed to support the in situ updating of decay maps and their reintegration within an HBIM workflow. The experimentation was carried out on the Oratory of San Giovanni Battista in Bussana Vecchia, starting from a previously developed HBIM model. The application allows operators to annotate decay phenomena on reference orthophotos using vector geometries, associate each annotation with semantic and temporal information, and store the data in JSON format. The workflow also includes a differential synchronization procedure based on Dynamo scripts, aimed at comparing successive annotation versions and updating the corresponding two-dimensional views in Autodesk Revit. The preliminary experimentation indicates the potential of the proposed procedure to support the traceable management of information updates between the design and worksite phases and to streamline the intermediate steps between direct observation, graphic restitution, and data reintegration, while maintaining an operational approach compatible with the requirements of the worksite phase in restoration processes.
Open AccessFrom Executive Design to Heritage Site: Preliminary Development of an Application for Integrating Information on the State of Conservation Within an HBIM Model
In conservation work on historic built heritage, the transition from executive design to the worksite often requires the verification, integration and updating of information acquired during the design phase. This issue is particularly relevant for the documentation of the state of conservation since new accessibility conditions on site may allow previously unreadable areas to be observed and decay maps to be revised. This paper presents the preliminary development and testing of SMAT, an iPadOS application designed to support the in situ updating of decay maps and their reintegration within an HBIM workflow. The experimentation was carried out on the Oratory of San Giovanni Battista in Bussana Vecchia, starting from a previously developed HBIM model. The application allows operators to annotate decay phenomena on reference orthophotos using vector geometries, associate each annotation with semantic and temporal information, and store the data in JSON format. The workflow also includes a differential synchronization procedure based on Dynamo scripts, aimed at comparing successive annotation versions and updating the corresponding two-dimensional views in Autodesk Revit. The preliminary experimentation indicates the potential of the proposed procedure to support the traceable management of information updates between the design and worksite phases and to streamline the intermediate steps between direct observation, graphic restitution, and data reintegration, while maintaining an operational approach compatible with the requirements of the worksite phase in restoration processes.
- Open Access
- 13 January 2026
- Published by MDPI AG in Intelligent Infrastructure and Construction
- Vol. 2 (1) , 2
A Digital Twin Approach Integrating IoT and AI for Monitoring and Assessing Roof Degradation in Historic Buildings
The EN-HERITAGE project aims to define and prototype an integrated digital platform for the management of virtual models of buildings belonging to the historic built heritage, with a particular focus on slate roofing systems. The platform integrates IoT technologies for environmental monitoring, architectural surveys carried out using laser scanning and photogrammetry, HBIM models, and artificial intelligence algorithms for the analysis of degradation phenomena. The pilot application was conducted on the Albergo dei Poveri complex in Genoa, providing a replicable methodology for the planned conservation of the historic built environment. Preliminary results highlight the effectiveness of the platform in integrating heterogeneous data, providing stakeholders involved in the management of extensive architectural heritage with concrete support for decision-making processes and greater efficiency in planning maintenance and restoration interventions on historic buildings.
- 13 January 2026
- Published by MDPI AG in Intelligent Infrastructure and Construction
- Vol. 2 (1) , 2
Open AccessA Digital Twin Approach Integrating IoT and AI for Monitoring and Assessing Roof Degradation in Historic Buildings
The EN-HERITAGE project aims to define and prototype an integrated digital platform for the management of virtual models of buildings belonging to the historic built heritage, with a particular focus on slate roofing systems. The platform integrates IoT technologies for environmental monitoring, architectural surveys carried out using laser scanning and photogrammetry, HBIM models, and artificial intelligence algorithms for the analysis of degradation phenomena. The pilot application was conducted on the Albergo dei Poveri complex in Genoa, providing a replicable methodology for the planned conservation of the historic built environment. Preliminary results highlight the effectiveness of the platform in integrating heterogeneous data, providing stakeholders involved in the management of extensive architectural heritage with concrete support for decision-making processes and greater efficiency in planning maintenance and restoration interventions on historic buildings.
- Open Access
- 1 January 2026
- Published by Firenze University Press
- p. 624-651
Implementing the Historic Urban Landscape Approach through Community Engagement: Comparative Perspectives from Porto and Genoa
The Historic Urban Landscape (HUL) approach offers an integrated understanding of historic urban areas as dynamic systems in which heritage, urban transformation, and governance are deeply interconnected. Despite its growing theoretical consolidation, its practical implementation remains fragmented, particularly in relation to the integration of heritage conservation, urban planning, and the participation of local communities. This paper explores the potential of community engagement to support the implementation of the HUL approach through a comparative analysis of the old city of Genoa and the historic centre of Porto, highlighting how the involvement of local communities still takes discontinuous forms and is not yet fully integrated into urban governance processes.
- 1 January 2026
- Published by Firenze University Press
- p. 624-651
Open AccessImplementing the Historic Urban Landscape Approach through Community Engagement: Comparative Perspectives from Porto and Genoa
The Historic Urban Landscape (HUL) approach offers an integrated understanding of historic urban areas as dynamic systems in which heritage, urban transformation, and governance are deeply interconnected. Despite its growing theoretical consolidation, its practical implementation remains fragmented, particularly in relation to the integration of heritage conservation, urban planning, and the participation of local communities. This paper explores the potential of community engagement to support the implementation of the HUL approach through a comparative analysis of the old city of Genoa and the historic centre of Porto, highlighting how the involvement of local communities still takes discontinuous forms and is not yet fully integrated into urban governance processes.
- Open Access
- 3 August 2021
- Published by MDPI AG in Infrastructures
- Vol. 6 (8) , 109
State of Conservation of Concrete Heritage Buildings: A European Screening
Historic concrete buildings are at risk. Limited knowledge of concrete technology until the 1960s led to more sensitive buildings than modern concrete buildings. In addition, the lack of sensibility regarding their heritage value and insufficient protection is leading to remorseless demolition. Still, concrete has proved to be a resilient material that can last over a century with proper care. There is not yet an estimation of the status of historic concrete buildings in Europe. Until now, a few attempts have been done to secondarily, and subjectively, gauge their conservation status. This paper is the result of a joint investigation studying forty-eight historic concrete buildings distributed in four countries. They were surveyed by expert teams according to a predefined methodology. The study aims to identify recurrent damages and parameters affecting the conservation state. It also aims to serve as the first trial for an objective and measurable methodology, to apply it with a statistically significant number of cases. Damages related to the corrosion of reinforcement and moisture-related processes were the most recurrent. The use of plasters, flat roofs, and structural façade walls show a positive effect in protecting the concrete. The state of conservation has a great variability across countries.
- 3 August 2021
- Published by MDPI AG in Infrastructures
- Vol. 6 (8) , 109
Open AccessState of Conservation of Concrete Heritage Buildings: A European Screening
Historic concrete buildings are at risk. Limited knowledge of concrete technology until the 1960s led to more sensitive buildings than modern concrete buildings. In addition, the lack of sensibility regarding their heritage value and insufficient protection is leading to remorseless demolition. Still, concrete has proved to be a resilient material that can last over a century with proper care. There is not yet an estimation of the status of historic concrete buildings in Europe. Until now, a few attempts have been done to secondarily, and subjectively, gauge their conservation status. This paper is the result of a joint investigation studying forty-eight historic concrete buildings distributed in four countries. They were surveyed by expert teams according to a predefined methodology. The study aims to identify recurrent damages and parameters affecting the conservation state. It also aims to serve as the first trial for an objective and measurable methodology, to apply it with a statistically significant number of cases. Damages related to the corrosion of reinforcement and moisture-related processes were the most recurrent. The use of plasters, flat roofs, and structural façade walls show a positive effect in protecting the concrete. The state of conservation has a great variability across countries.
- 23 March 2019
- Published by Springer Nature
- p. 184-193
A Journey of Valorisation from the Sacred to the Secular. The Oratory of Sant’Antonio Abate in the Village of Mele (Genoa-Italy)
- 23 March 2019
- Published by Springer Nature
- p. 184-193
A Journey of Valorisation from the Sacred to the Secular. The Oratory of Sant’Antonio Abate in the Village of Mele (Genoa-Italy)
- 16 January 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 13 (3) , 438-450
3D Digital Survey of Iron Tie-Rods in Masonry Buildings: Cross-Sections Analysis and Error Estimation
Ancient iron tie-rods are handcrafted elements with large geometric irregularities, due to production techniques (they are shaped by hammering and linked by hot-forging) and corrosion processes. In common practice, their cross section (that is one of the main parameter to assess their strength) is manually measured on site with a manual caliber. By analyzing a set of detailed three-dimensional (3D) digital surveys of real ancient tie-rods, this study provide an evaluation of the errors made by in-situ manual geometric measurements. In particular, it shows that, in some cases, manual on-site survey is sufficiently reliable and has errors that fall below 10%. Moreover, it shows that when tie-rods have high corrosion levels in hidden zones (typically those close or within the retaining walls) the on-site survey of visible parts only may produce far greater errors that exceed 100%, leading to a strong overestimation of the cross-section of the tie. The ongoing study is a first step toward the definition of correction coefficients to be applied to the on-site manual measurements of ancient tie-rods, with the final aim to improve the reliability of structural analyses.
- 16 January 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 13 (3) , 438-450
3D Digital Survey of Iron Tie-Rods in Masonry Buildings: Cross-Sections Analysis and Error Estimation
Ancient iron tie-rods are handcrafted elements with large geometric irregularities, due to production techniques (they are shaped by hammering and linked by hot-forging) and corrosion processes. In common practice, their cross section (that is one of the main parameter to assess their strength) is manually measured on site with a manual caliber. By analyzing a set of detailed three-dimensional (3D) digital surveys of real ancient tie-rods, this study provide an evaluation of the errors made by in-situ manual geometric measurements. In particular, it shows that, in some cases, manual on-site survey is sufficiently reliable and has errors that fall below 10%. Moreover, it shows that when tie-rods have high corrosion levels in hidden zones (typically those close or within the retaining walls) the on-site survey of visible parts only may produce far greater errors that exceed 100%, leading to a strong overestimation of the cross-section of the tie. The ongoing study is a first step toward the definition of correction coefficients to be applied to the on-site manual measurements of ancient tie-rods, with the final aim to improve the reliability of structural analyses.
- 9 January 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 13 (3) , 425-437
Experimental Characterization of Ancient Metal Tie-Rods in Historic Masonry Buildings
Metal tie-rods play a decisive role in the control of horizontal thrusts in historic masonry buildings. The main goal of the present study is to investigate the relationship between metallurgical and mechanical properties of original tie-rods in order to contribute to a wider study on ancient building stability and their restoration protocols. This article presents the results of an experimental test campaign carried out on 14 historic tie-rods (dating back from 16th–19th century) recovered from restoration works or building demolitions. Stress-strain mechanical tests showed that the elastic modulus of the material is comparable to that of modern structural steel, while the strength and the elongation capability are significantly lower, with a large scatter. Further analyses based on metallography allowed us to assess that this mechanical behavior depends on the heterogeneous nature of the material, which can eventually be compared to a composite with vitreous elongated particles in a ferritic or ferrito-pearlitic matrix. The origin of such metallurgical condition is related to the iron making based on direct smelting from ores.
- 9 January 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 13 (3) , 425-437
Experimental Characterization of Ancient Metal Tie-Rods in Historic Masonry Buildings
Metal tie-rods play a decisive role in the control of horizontal thrusts in historic masonry buildings. The main goal of the present study is to investigate the relationship between metallurgical and mechanical properties of original tie-rods in order to contribute to a wider study on ancient building stability and their restoration protocols. This article presents the results of an experimental test campaign carried out on 14 historic tie-rods (dating back from 16th–19th century) recovered from restoration works or building demolitions. Stress-strain mechanical tests showed that the elastic modulus of the material is comparable to that of modern structural steel, while the strength and the elongation capability are significantly lower, with a large scatter. Further analyses based on metallography allowed us to assess that this mechanical behavior depends on the heterogeneous nature of the material, which can eventually be compared to a composite with vitreous elongated particles in a ferritic or ferrito-pearlitic matrix. The origin of such metallurgical condition is related to the iron making based on direct smelting from ores.
- 2 January 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 13 (3) , 451-471
Historical Use of Metal Tie-Rods in the Italian Territory: Treatises, Essays, and Manuals through Four Centuries of History
The use of metal tie-rods in buildings is documented and visible in many Italian areas since the 15th century. This article refers to the study of treatises, manuals and essays from the 15th to the early 20th century, mainly in the Italian context with some exceptions of certain foreign texts that, due to their diffusion and importance, have greatly influenced the technical literature on the subject. Technology is an expression of the social, economic, cultural, political and juridical events of a country and, as such, is deeply linked to the times and territories in which it develops. However, it is also closely linked to the laws of nature and to forms of communication, therefore it is useful to compare, underlining the analogies and differences, the knowledge and the ways of the productive and technical process in a long-term analysis.
- 2 January 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 13 (3) , 451-471
Historical Use of Metal Tie-Rods in the Italian Territory: Treatises, Essays, and Manuals through Four Centuries of History
The use of metal tie-rods in buildings is documented and visible in many Italian areas since the 15th century. This article refers to the study of treatises, manuals and essays from the 15th to the early 20th century, mainly in the Italian context with some exceptions of certain foreign texts that, due to their diffusion and importance, have greatly influenced the technical literature on the subject. Technology is an expression of the social, economic, cultural, political and juridical events of a country and, as such, is deeply linked to the times and territories in which it develops. However, it is also closely linked to the laws of nature and to forms of communication, therefore it is useful to compare, underlining the analogies and differences, the knowledge and the ways of the productive and technical process in a long-term analysis.
- 1 June 2018
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 31, S71-S81
Moisture monitoring experience in the old town of Genoa (Italy)
- 1 June 2018
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 31, S71-S81
Moisture monitoring experience in the old town of Genoa (Italy)
- 5 May 2018
- Published by Springer Nature in Applied Geomatics
- Vol. 10 (3) , 191-204
Data parametric representation for monitoring of cultural heritage
- 5 May 2018
- Published by Springer Nature in Applied Geomatics
- Vol. 10 (3) , 191-204
Data parametric representation for monitoring of cultural heritage