Juan Antonio Gil-Martinez-Abarca
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juan Antonio Gil-Martinez-Abarca has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Francisco Maciá Pérez
Department of Computer Engineering and Computer Science, University of Alicante, 03080 Alicante, Spain
12 shared publications Diego Marcos-Jorquera
6 shared publications- Diego Marcos-Jorquera
Department of Computer Science and Technologies, Polytechnic University College, University of Alicante, Carretera de San Vicente del Raspeig, s/n, 03690 Alicante, Spain
6 shared publications - Virgilio Gilart-Iglesias
University of Alicante
6 shared publications Virgilio Gilart-Iglesias
4 shared publications- Iren Lorenzo-Fonseca
University of Alicante
3 shared publications
Latest Publications
- Open Access
Smart Monitoring Embedded Service for Energy-Efficient and Sustainable Management in Data Centers
Information technologies (IT) currently represent 2% of CO2 emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile required to support the model.
Open AccessSmart Monitoring Embedded Service for Energy-Efficient and Sustainable Management in Data Centers
Information technologies (IT) currently represent 2% of CO2 emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile required to support the model.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 751-752
Integration of Business and Manufacturing Processes through Industrial Machinery as a Service Approach
In manufacturing organizations is difficult to reach the requirements of the new business models (agile and dynamic adaptation to changes) due to technological and conceptual constraints between elements located at different levels of the organization, which prevents the integration of business and manufacturing processes. In this paper, a new industrial machinery model that achieves this integration has been proposed. This model, named IMaaS, shows the industrial machinery as a set of business processes, removing the conceptual constraints, and exposed as services, removing technology constraints.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 751-752
Integration of Business and Manufacturing Processes through Industrial Machinery as a Service Approach
In manufacturing organizations is difficult to reach the requirements of the new business models (agile and dynamic adaptation to changes) due to technological and conceptual constraints between elements located at different levels of the organization, which prevents the integration of business and manufacturing processes. In this paper, a new industrial machinery model that achieves this integration has been proposed. This model, named IMaaS, shows the industrial machinery as a set of business processes, removing the conceptual constraints, and exposed as services, removing technology constraints.
- 1 January 2011
- Published by Springer Nature
- p. 76-83
Security Alert Correlation Using Growing Neural Gas
- 1 January 2011
- Published by Springer Nature
- p. 76-83
Security Alert Correlation Using Growing Neural Gas
- 14 June 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (3) , 722-732
Network Intrusion Detection System Embedded on a Smart Sensor
This paper proposes a Network Intrusion Detection System (NIDS) embedded in a smart-sensor-inspired device under a service-oriented architecture (SOA) approach which is able to operate independently as an anomaly-based NIDS, or integrated transparently in a Distributed Intrusion Detection System (DIDS). The proposal is innovative because it combines the advantages of the smart sensor approach and the subsequent offering of the NIDS functionality as a service with the SOA use to achieve their integration with other DIDS components. The main goal of this paper is to reduce the huge volume of management tasks inherent to this type of network services, as well as facilitating the design of DIDS whose managing complexity could be restricted within well-defined margins. This paper also addresses the construction of a physical sensor prototype. This prototype was used to carry out the tests that has demonstrated the proposal's validity, providing detection and performance ratios similar to those of existing intrusion detection systems (IDS), but with the advantage of a zero-maintenance approach.
- 14 June 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (3) , 722-732
Network Intrusion Detection System Embedded on a Smart Sensor
This paper proposes a Network Intrusion Detection System (NIDS) embedded in a smart-sensor-inspired device under a service-oriented architecture (SOA) approach which is able to operate independently as an anomaly-based NIDS, or integrated transparently in a Distributed Intrusion Detection System (DIDS). The proposal is innovative because it combines the advantages of the smart sensor approach and the subsequent offering of the NIDS functionality as a service with the SOA use to achieve their integration with other DIDS components. The main goal of this paper is to reduce the huge volume of management tasks inherent to this type of network services, as well as facilitating the design of DIDS whose managing complexity could be restricted within well-defined margins. This paper also addresses the construction of a physical sensor prototype. This prototype was used to carry out the tests that has demonstrated the proposal's validity, providing detection and performance ratios similar to those of existing intrusion detection systems (IDS), but with the advantage of a zero-maintenance approach.
- Open Access
- 1 March 2010
- Published by IntechOpen
Embedded Energy Management System for the ICT Saving Energy Consumption
Embedded Energy Management System for the ICT Saving Energy Consumption | InTechOpen, Published on: 2010-03-01. Authors: Francisco Macia-Perez, Diego Marcos-Jorquera, Virgilio Gilart-Iglesias, et
- 1 March 2010
- Published by IntechOpen
Open AccessEmbedded Energy Management System for the ICT Saving Energy Consumption
Embedded Energy Management System for the ICT Saving Energy Consumption | InTechOpen, Published on: 2010-03-01. Authors: Francisco Macia-Perez, Diego Marcos-Jorquera, Virgilio Gilart-Iglesias, et
- 21 August 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (3) , 839-849
Wake on LAN Over the Internet as Web Service System on Chip
In this paper, we introduce a system on chip designed to run a particular Web service (WS) in an application-specific integrated circuit. The system has been designed devoid of processor and software and conceived as a hardware pattern for a trouble-free design of network services offered as WS in a service-oriented architecture (SOA). Therefore, the chip is not only able to act as a Simple Object Access Protocol service provider but also capable of registering the service on its own in an external broker server using the Universal Description, Discovery and Integration Standard publication protocol. This proposal has been named WS on chip, and its main goal is to implement more cost-effective and zero-management SOA network devices. To validate this approach, a prototypical device has been developed using a field-programmable gate array technology. The particular network service selected has been Wake on LAN (WoL) over the Internet, thus allowing any WS client to wake up any network node compatible with WoL technology. A full SOA scenario has also been developed to test the prototype functionalities and show the proposal validity.
- 21 August 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (3) , 839-849
Wake on LAN Over the Internet as Web Service System on Chip
In this paper, we introduce a system on chip designed to run a particular Web service (WS) in an application-specific integrated circuit. The system has been designed devoid of processor and software and conceived as a hardware pattern for a trouble-free design of network services offered as WS in a service-oriented architecture (SOA). Therefore, the chip is not only able to act as a Simple Object Access Protocol service provider but also capable of registering the service on its own in an external broker server using the Universal Description, Discovery and Integration Standard publication protocol. This proposal has been named WS on chip, and its main goal is to implement more cost-effective and zero-management SOA network devices. To validate this approach, a prototypical device has been developed using a field-programmable gate array technology. The particular network service selected has been Wake on LAN (WoL) over the Internet, thus allowing any WS client to wake up any network node compatible with WoL technology. A full SOA scenario has also been developed to test the prototype functionalities and show the proposal validity.
- 1 January 2009
- Published by Springer Nature
- p. 1296-1303
Intrusion Detection Method Using Neural Networks Based on the Reduction of Characteristics
- 1 January 2009
- Published by Springer Nature
- p. 1296-1303
Intrusion Detection Method Using Neural Networks Based on the Reduction of Characteristics
- 1 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1 (19354576) , 249-254
Service model for the management of industrial environments. Dynamic reconfiguration of production elements
This paper proposes a system for management of industrial production elements inspired by the techniques employed in the management of the current and complex ICT infrastructures on which business models are based and which are having considerable success. The main result of applying these techniques is that, at the same time as providing an adequate focus for the management of this type of infrastructure, it is possible to evolve from mass production models towards mass customization models increasingly bringing organisation objectives closer to the interests and requirements of customers. In this work, we present a review of the technologies in the sectors involved; a reconfiguration system is proposed for production systems based on management of ICT and integrated with the business system; their implementation and operation is analysed; and finally the main conclusions are drawn from the work, together with an indication of future lines of research.
- 1 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1 (19354576) , 249-254
Service model for the management of industrial environments. Dynamic reconfiguration of production elements
This paper proposes a system for management of industrial production elements inspired by the techniques employed in the management of the current and complex ICT infrastructures on which business models are based and which are having considerable success. The main result of applying these techniques is that, at the same time as providing an adequate focus for the management of this type of infrastructure, it is possible to evolve from mass production models towards mass customization models increasingly bringing organisation objectives closer to the interests and requirements of customers. In this work, we present a review of the technologies in the sectors involved; a reconfiguration system is proposed for production systems based on management of ICT and integrated with the business system; their implementation and operation is analysed; and finally the main conclusions are drawn from the work, together with an indication of future lines of research.
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 15417719,p. 395-398
Services and Networks management through embedded devices and SOA
In this paper we present an approach based on the use of embedded network devices for the deployment of small network services, such as DHCP, BOOTP, filters or very specific proxies. The novelty of the proposal resides in the very reduced size of the devices, in that every device is specialized in a certain network function, and specially designed to operate with minimum maintenance, and in the fact that they are presented under both conventional (client-server) and more open (SOA) standards, more concretely, as Web services. At the same time, these embedded services can work in an individual way or in collaboration with other enterprise network services, either provided by means of conventional systems or by means of other embedded devices. To specify the proposal, we have chosen as example an embedded device able to manage the remote boot of network nodes by means of wake on LAN (WoL) through Internet
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 15417719,p. 395-398
Services and Networks management through embedded devices and SOA
In this paper we present an approach based on the use of embedded network devices for the deployment of small network services, such as DHCP, BOOTP, filters or very specific proxies. The novelty of the proposal resides in the very reduced size of the devices, in that every device is specialized in a certain network function, and specially designed to operate with minimum maintenance, and in the fact that they are presented under both conventional (client-server) and more open (SOA) standards, more concretely, as Web services. At the same time, these embedded services can work in an individual way or in collaboration with other enterprise network services, either provided by means of conventional systems or by means of other embedded devices. To specify the proposal, we have chosen as example an embedded device able to manage the remote boot of network nodes by means of wake on LAN (WoL) through Internet
- Open Access
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19460740,p. 1261-1268
Wake on LAN over Internet as Web Service
In this paper we present an approach based on the use of embedded network devices for the deployment of small network services, such as DHCP, BOOTP, filters or very specific proxies. The novelty of the proposal resides in the very reduced size of the devices, in that every device is specialized in a certain network function, and specially designed to operate with minimum maintenance, and in the fact that they are presented under both conventional (client-server) and more open (SOA) standards, more concretely, as Web services. At the same time, these embedded services can work in an individual way or in collaboration with other enterprise network services, either provided by means of conventional systems or by means of other embedded devices. To specify the proposal, we have chosen as example an embedded device able to manage the remote boot of network nodes by means of wake on LAN (WoL) through Internet.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19460740,p. 1261-1268
Open AccessWake on LAN over Internet as Web Service
In this paper we present an approach based on the use of embedded network devices for the deployment of small network services, such as DHCP, BOOTP, filters or very specific proxies. The novelty of the proposal resides in the very reduced size of the devices, in that every device is specialized in a certain network function, and specially designed to operate with minimum maintenance, and in the fact that they are presented under both conventional (client-server) and more open (SOA) standards, more concretely, as Web services. At the same time, these embedded services can work in an individual way or in collaboration with other enterprise network services, either provided by means of conventional systems or by means of other embedded devices. To specify the proposal, we have chosen as example an embedded device able to manage the remote boot of network nodes by means of wake on LAN (WoL) through Internet.