Robson Zulcão
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Robson Zulcão has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Guilherme Cunha Guignone
Universidade Federal do Espirito Santo, Brazil
4 shared publications - Geilma Lima Vieira
Universidade Federal do Espírito Santo, Brasil
3 shared publications João Luiz Calmon
3 shared publications- Darli Rodrigues Vieira
Management Department, Université du Québec à Trois-Rivières, 3351, Boul. des Forges, Trois-Rivières, QC G8Z 4M3, Canada
2 shared publications Felipe Zanellato Coelho
2 shared publications- Gercyr Baptista Junior
Instituto Federal do Espírito Santo
2 shared publications
Latest Publications
- Open Access
- 1 June 2020
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 13 (3) , 613-627
Performance of concrete with the incorporation of waste from the process of stoning and polishing of glass as partial replacement of cement
The incorporation of waste glass as a partial replacement for cement in concrete can provide an alternative destination for the waste, reduce the consumption of cement (minimizing CO2 emissions and consumption of natural resources), and improve the concrete performance. Thus, this research evaluated the performance of concrete incorporating waste glass sludge (GS), resulting from the process of stoning and polishing of soda-lime flat glass, as a supplementary cementing material. Mechanical strength and durability properties were assessed through compressive strength, alkali-silica reactivity, electrical resistivity and chloride permeability, diffusivity and migration tests. Mixtures containing metakaolin (ME) were also evaluated. The results indicated that the use of the waste ground to an adequate size can replace up to 20% of cement. At this content, it caused a reduction of chloride penetration of over 80%, reduced ASR and conserved compressive strength. The combination of waste with metakaolin replacing 20% of cement also improved all the concrete properties, increasing the compressive strength up to 12% at 28 days.
- 1 June 2020
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 13 (3) , 613-627
Open AccessPerformance of concrete with the incorporation of waste from the process of stoning and polishing of glass as partial replacement of cement
The incorporation of waste glass as a partial replacement for cement in concrete can provide an alternative destination for the waste, reduce the consumption of cement (minimizing CO2 emissions and consumption of natural resources), and improve the concrete performance. Thus, this research evaluated the performance of concrete incorporating waste glass sludge (GS), resulting from the process of stoning and polishing of soda-lime flat glass, as a supplementary cementing material. Mechanical strength and durability properties were assessed through compressive strength, alkali-silica reactivity, electrical resistivity and chloride permeability, diffusivity and migration tests. Mixtures containing metakaolin (ME) were also evaluated. The results indicated that the use of the waste ground to an adequate size can replace up to 20% of cement. At this content, it caused a reduction of chloride penetration of over 80%, reduced ASR and conserved compressive strength. The combination of waste with metakaolin replacing 20% of cement also improved all the concrete properties, increasing the compressive strength up to 12% at 28 days.
- Open Access
- 3 March 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia da Paraiba in Revista Principia
- Vol. 1 (48)
Cradle-to-gate life cycle assessment of self-compacting concrete incorporating alternative materials: a case study
- 3 March 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia da Paraiba in Revista Principia
- Vol. 1 (48)
Open AccessCradle-to-gate life cycle assessment of self-compacting concrete incorporating alternative materials: a case study
- 16 February 2020
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (21) , 2965-2983
Incorporation of glass powder and metakaolin as cement partial replacement to improve concrete mechanical properties and increase service life
The search for the application of alternative materials, that can partially replace cement and increase the service life of concrete structures, is necessary from the environmental and technological point of view. In this context, the partial substitution of cement in concretes by pozzolanic additions can be performed as ternary mixtures, such as the combined incorporation of glass powder and metakaolin, enabling the reduction of cement consumption and the minimisation of the CO2 emissions and the natural resources consumption. Therefore, this research evaluated the incorporation of glass powder and metakaolin in an isolated and combined way, as partial substitutes for cement in concretes. The compressive strength and the chloride penetration resistance were evaluated by means of electrical resistivity, chloride permeability, steady-state chloride migration test and chloride diffusion test, obtaining the diffusivity and chloride contaminated depth by the colorimetric method. The alkali–silica reactivity test was also conducted, because of the alkali content of the waste glass being higher than the standard requirements. It was concluded that the combined use of ground glass powder and metakaolin in concrete allowed the replacement of up to 20% of the cement, promoting microstructural improvements and increasing properties related to durability and compressive strength already available at 28 days. Furthermore, it increased the estimated service life up to five times, working as an alternative for the reduction of cement use and concrete properties' improvement.
- 16 February 2020
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (21) , 2965-2983
Incorporation of glass powder and metakaolin as cement partial replacement to improve concrete mechanical properties and increase service life
The search for the application of alternative materials, that can partially replace cement and increase the service life of concrete structures, is necessary from the environmental and technological point of view. In this context, the partial substitution of cement in concretes by pozzolanic additions can be performed as ternary mixtures, such as the combined incorporation of glass powder and metakaolin, enabling the reduction of cement consumption and the minimisation of the CO2 emissions and the natural resources consumption. Therefore, this research evaluated the incorporation of glass powder and metakaolin in an isolated and combined way, as partial substitutes for cement in concretes. The compressive strength and the chloride penetration resistance were evaluated by means of electrical resistivity, chloride permeability, steady-state chloride migration test and chloride diffusion test, obtaining the diffusivity and chloride contaminated depth by the colorimetric method. The alkali–silica reactivity test was also conducted, because of the alkali content of the waste glass being higher than the standard requirements. It was concluded that the combined use of ground glass powder and metakaolin in concrete allowed the replacement of up to 20% of the cement, promoting microstructural improvements and increasing properties related to durability and compressive strength already available at 28 days. Furthermore, it increased the estimated service life up to five times, working as an alternative for the reduction of cement use and concrete properties' improvement.
- 11 January 2019
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 37 (2) , 186-195
Comparative life cycle assessment of ornamental stone processing waste recycling, sand, clay and limestone filler
Owing to the cost of destination and transportation of ornamental stone processing waste, many studies focused on the reuse and recycling of this product. However, there is a scarcity of articles addressing the environmental viability of the recycling of ornamental stone. In this context, this study comprehends a comparative life cycle assessment of ornamental stone processing waste and conventional materials: sand, clay and limestone filler. The modelling software used was SimaPro 8.3.0.0 with Ecoinvent 3.2 database, employing the ReCiPe H/H methodology for impact assessment. The results show that the recycling of ornamental stone processing waste is environmentally preferable, and the artificial drying alternatives, such as flash dryer and rotary dryer, have lower environmental impact than extracting and processing clay through atomisation methods and limestone filler production. The sensitivity analysis indicated that it is possible to transport the ornamental stone processing waste 37 km after processing, so it reaches the same environmental impact as sand extracted by dredging. On the other hand, an increase of 25% in the energy consumption incremented only 7% of the environmental impact owing to the Brazilian energy mix.
- 11 January 2019
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 37 (2) , 186-195
Comparative life cycle assessment of ornamental stone processing waste recycling, sand, clay and limestone filler
Owing to the cost of destination and transportation of ornamental stone processing waste, many studies focused on the reuse and recycling of this product. However, there is a scarcity of articles addressing the environmental viability of the recycling of ornamental stone. In this context, this study comprehends a comparative life cycle assessment of ornamental stone processing waste and conventional materials: sand, clay and limestone filler. The modelling software used was SimaPro 8.3.0.0 with Ecoinvent 3.2 database, employing the ReCiPe H/H methodology for impact assessment. The results show that the recycling of ornamental stone processing waste is environmentally preferable, and the artificial drying alternatives, such as flash dryer and rotary dryer, have lower environmental impact than extracting and processing clay through atomisation methods and limestone filler production. The sensitivity analysis indicated that it is possible to transport the ornamental stone processing waste 37 km after processing, so it reaches the same environmental impact as sand extracted by dredging. On the other hand, an increase of 25% in the energy consumption incremented only 7% of the environmental impact owing to the Brazilian energy mix.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 24 (4)
Analysis of the chloride diffusion coefficients by different test methods in concrete mixtures containing metakaolin and high-slag blast-furnace cement
This study aims to evaluate the chloride diffusion coefficient and the service life (SL) of concretes containing metakaolin and high-slag blast-furnace cement (HSBFC). Accelerated methods of chloride ion diffusion and migration (RCPT, RMT, BDT and multiregime test method) were used. To produce the specimens, HSBFC resistant to sulphates (CPIII 40 RS) was partially replaced by metakaolin in the contents of 4%, 8% and 12%. Statistical analysis was performed by means of Analysis of Variance (ANOVA) and Tukey's Test to the chlorides diffusion coefficients obtained from different test methods. Similarity between diffusion by immersion (BDT) and non-stationary migration test (RMT and multiregime method) results was noted, however, with differences regarding to the stationary regime. The average diffusion coefficient obtained in the concrete specimens with 8 and 12% metakaolin as HSBFC partial replacement was 40-45 % lower than the reference mixture, providing an SL increase of approximately 70%. The most efficient metakaolin content obtained for overall mechanical and durability properties of concrete was 8%. This study also showed that HSBFC partial replacement by metakaolin can be beneficial even at later ages, as in 150 days.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 24 (4)
Open AccessAnalysis of the chloride diffusion coefficients by different test methods in concrete mixtures containing metakaolin and high-slag blast-furnace cement
This study aims to evaluate the chloride diffusion coefficient and the service life (SL) of concretes containing metakaolin and high-slag blast-furnace cement (HSBFC). Accelerated methods of chloride ion diffusion and migration (RCPT, RMT, BDT and multiregime test method) were used. To produce the specimens, HSBFC resistant to sulphates (CPIII 40 RS) was partially replaced by metakaolin in the contents of 4%, 8% and 12%. Statistical analysis was performed by means of Analysis of Variance (ANOVA) and Tukey's Test to the chlorides diffusion coefficients obtained from different test methods. Similarity between diffusion by immersion (BDT) and non-stationary migration test (RMT and multiregime method) results was noted, however, with differences regarding to the stationary regime. The average diffusion coefficient obtained in the concrete specimens with 8 and 12% metakaolin as HSBFC partial replacement was 40-45 % lower than the reference mixture, providing an SL increase of approximately 70%. The most efficient metakaolin content obtained for overall mechanical and durability properties of concrete was 8%. This study also showed that HSBFC partial replacement by metakaolin can be beneficial even at later ages, as in 150 days.
- 1 November 2018
- Published by Elsevier in Construction and Building Materials
- Vol. 188, 444-455
Utilisation of heat-treated ornamental stone processing waste as an addition to concretes to improve compressive strength and reduce chloride ion penetration
- 1 November 2018
- Published by Elsevier in Construction and Building Materials
- Vol. 188, 444-455
Utilisation of heat-treated ornamental stone processing waste as an addition to concretes to improve compressive strength and reduce chloride ion penetration