Diego Sosa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Diego Sosa has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Christian Gómez
Escuela Politécnica Nacional
3 shared publications Christian Gómez
Departamento de Ingeniería Civil y Ambiental, Quito, Escuela Politécnica Nacional
2 shared publications- Juan Molina-Cedeño2 shared publications
- Natividad Garcia-Troncoso
ESPOL Polytechnic University, ESPOL
2 shared publications - Betzabeth Suquillo
School of Civil Engineering, Pontificia Universidad Católica de Valparaíso, Av. Brasil 2147, Valparaíso 2362807, Chile
1 shared publication - Carlos Andrés Celi Sánchez
Pontificia Universidad Católica del Ecuador
1 shared publication
Latest Publications
- Open Access
- 22 October 2026
- Published by Taylor & Francis in International Journal of Architectural Heritage
- p. 1-21
Seismic Performance and Retrofit Strategies for Bahareque Walls with Different Lath Anchorage Systems
1. Bahareque is a traditional construction technique widely used in Latin American regions exposed to significant seismic hazard. This system typically consists of a frame made of guadua bamboo (Gu...
- 22 October 2026
- Published by Taylor & Francis in International Journal of Architectural Heritage
- p. 1-21
Open AccessSeismic Performance and Retrofit Strategies for Bahareque Walls with Different Lath Anchorage Systems
1. Bahareque is a traditional construction technique widely used in Latin American regions exposed to significant seismic hazard. This system typically consists of a frame made of guadua bamboo (Gu...
- Open Access
- 17 July 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Experimental assessment of the lateral cyclic response of cemented bahareque walls
- 17 July 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessExperimental assessment of the lateral cyclic response of cemented bahareque walls
- Open Access
- 31 March 2026
- Published by Elsevier in Structures
- Vol. 87
Seismic performance assessment of risk category III Ecuadorian buildings made of reinforced concrete frames and flat slabs
- 31 March 2026
- Published by Elsevier in Structures
- Vol. 87
Open AccessSeismic performance assessment of risk category III Ecuadorian buildings made of reinforced concrete frames and flat slabs
- 15 March 2026
- Published by Springer Nature
- p. 1369-1382
Guadua Shear Retrofit in Earthen Short Walls
- 15 March 2026
- Published by Springer Nature
- p. 1383-1395
Structural Characterization of Short Bahareque Walls Using Different Lath Anchorage Techniques
- 15 March 2026
- Published by Springer Nature
- p. 1383-1395
Structural Characterization of Short Bahareque Walls Using Different Lath Anchorage Techniques
- Open Access
- 4 September 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (17) , 9973
Modeling of RC Moment Frame Retrofit with Mortar Walls Reinforced with Steel Wire Mesh
Current construction codes require detailed analyses for structural retrofitting, which must consider performance during seismic events. Therefore, the computational models used to evaluate existing infrastructure require nonlinear structural analysis and damage estimates. For structural retrofitting, nonlinear computational modeling must represent the connectivity between existing and new elements. This study proposes recommendations on structural modeling based on fiber elements to represent reinforced concrete (RC) moment frames retrofitted with mortar walls reinforced with steel wire mesh. For this purpose, capacity curves of moment frames retrofitted with mortar walls were calculated by hand with the Bernoulli–Euler beam theory, moment–curvature analyses, and a plastic hinge model. Then, these capacity curves were used to calibrate the connectivity and constraint conditions in fiber models between the existing frame and the new wall required to capture the performance of the retrofitted structure. The study found that, for a single wall connected with top and bottom frame border elements, the capacity curves from fiber models underestimate stiffness, maximum strength, and residual strength. These estimation issues are reduced by including intermediate connectivity nodes between the top and bottom frame where rigid link constraints connect the existing frame with the new wall.
- 4 September 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (17) , 9973
Open AccessModeling of RC Moment Frame Retrofit with Mortar Walls Reinforced with Steel Wire Mesh
Current construction codes require detailed analyses for structural retrofitting, which must consider performance during seismic events. Therefore, the computational models used to evaluate existing infrastructure require nonlinear structural analysis and damage estimates. For structural retrofitting, nonlinear computational modeling must represent the connectivity between existing and new elements. This study proposes recommendations on structural modeling based on fiber elements to represent reinforced concrete (RC) moment frames retrofitted with mortar walls reinforced with steel wire mesh. For this purpose, capacity curves of moment frames retrofitted with mortar walls were calculated by hand with the Bernoulli–Euler beam theory, moment–curvature analyses, and a plastic hinge model. Then, these capacity curves were used to calibrate the connectivity and constraint conditions in fiber models between the existing frame and the new wall required to capture the performance of the retrofitted structure. The study found that, for a single wall connected with top and bottom frame border elements, the capacity curves from fiber models underestimate stiffness, maximum strength, and residual strength. These estimation issues are reduced by including intermediate connectivity nodes between the top and bottom frame where rigid link constraints connect the existing frame with the new wall.
- Open Access
- 11 February 2021
- Published by Escuela Politecnica Nacional in Revista Politécnica
- Vol. 47 (1) , 43-56
Evaluación y Reforzamiento de una Estructura Patrimonial de Adobe con Irregularidad en Planta
En el Ecuador existe una gran cantidad de estructuras patrimoniales hechas con materiales frágiles como el adobe. Eventos sísmicos recientes han puesto en manifiesto el pobre desempeño de este tipo de estructuras debido a su gran masa y poca capacidad de resistir cargas sísmicas. Este artículo presenta la evaluación del edificio del antiguo Colegio Simón Bolívar y varias técnicas de reforzamiento en el sistema de muros portantes de esta estructura patrimonial de adobe con irregularidad en planta, que está ubicada en el casco colonial de la ciudad de Quito. Este estudio supone que las fuerzas externas actúan en dirección del plano más resistente de la pared y que los muros de adobe tienen poca capacidad de resistir cargas laterales fuera del plano. Basado en estas condiciones, un análisis de sensibilidad de la discretización para elementos finitos se presenta mediante el uso de un programa comercial y se determinan valores empíricos que relacionan la proporción entre las dimensiones de los elementos finitos y la longitud principal de los muros. Por lo tanto, esta propuesta para el mallado de los elementos finitos busca obtener proporciones iniciales para hacer un primer análisis de calibración de los elementos mediante el control de esfuerzos y desplazamientos. El presente trabajo evalúa el mallado de elementos finitos comúnmente utilizado para el análisis de estructuras bidimensionales por lo que se destaca la importancia de la calibración inicial del mallado de elementos para obtener resultados confiables.
- 11 February 2021
- Published by Escuela Politecnica Nacional in Revista Politécnica
- Vol. 47 (1) , 43-56
Open AccessEvaluación y Reforzamiento de una Estructura Patrimonial de Adobe con Irregularidad en Planta
En el Ecuador existe una gran cantidad de estructuras patrimoniales hechas con materiales frágiles como el adobe. Eventos sísmicos recientes han puesto en manifiesto el pobre desempeño de este tipo de estructuras debido a su gran masa y poca capacidad de resistir cargas sísmicas. Este artículo presenta la evaluación del edificio del antiguo Colegio Simón Bolívar y varias técnicas de reforzamiento en el sistema de muros portantes de esta estructura patrimonial de adobe con irregularidad en planta, que está ubicada en el casco colonial de la ciudad de Quito. Este estudio supone que las fuerzas externas actúan en dirección del plano más resistente de la pared y que los muros de adobe tienen poca capacidad de resistir cargas laterales fuera del plano. Basado en estas condiciones, un análisis de sensibilidad de la discretización para elementos finitos se presenta mediante el uso de un programa comercial y se determinan valores empíricos que relacionan la proporción entre las dimensiones de los elementos finitos y la longitud principal de los muros. Por lo tanto, esta propuesta para el mallado de los elementos finitos busca obtener proporciones iniciales para hacer un primer análisis de calibración de los elementos mediante el control de esfuerzos y desplazamientos. El presente trabajo evalúa el mallado de elementos finitos comúnmente utilizado para el análisis de estructuras bidimensionales por lo que se destaca la importancia de la calibración inicial del mallado de elementos para obtener resultados confiables.
- 31 July 2017
- Published by Praise Worthy Prize in International Review of Civil Engineering (IRECE)
- Vol. 8 (4) , 160
Study of Bamboo Physical Properties and its Application as Reinforcement in Adobe Structures
- 31 July 2017
- Published by Praise Worthy Prize in International Review of Civil Engineering (IRECE)
- Vol. 8 (4) , 160
Study of Bamboo Physical Properties and its Application as Reinforcement in Adobe Structures
- Open Access
- 1 January 2017
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2017 (1)
Experimental and Analytical Study of Slender Reinforced Concrete Shear Wall under Cyclic In‐Plane Lateral Load
This study describes a slender reinforced concrete shear wall experimental test under in‐plane cyclic lateral load, and the development of an analytical model which uses the fiber method approach to consider hysteretic nonlinear constitutive material models behavior. The shear wall tested had bending behavior, since the amount of longitudinal reinforcing bars produced weak bending capacity compared to the shear strength. The analytical model tries to represent global and local behavior of the wall, and its calibration is based on reaching experimental parameters like area enclosed and secant stiffness on every loop. After the analytical model was calibrated, the relation between some performance points and damage states observed during the test is studied.
- 1 January 2017
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2017 (1)
Open AccessExperimental and Analytical Study of Slender Reinforced Concrete Shear Wall under Cyclic In‐Plane Lateral Load
This study describes a slender reinforced concrete shear wall experimental test under in‐plane cyclic lateral load, and the development of an analytical model which uses the fiber method approach to consider hysteretic nonlinear constitutive material models behavior. The shear wall tested had bending behavior, since the amount of longitudinal reinforcing bars produced weak bending capacity compared to the shear strength. The analytical model tries to represent global and local behavior of the wall, and its calibration is based on reaching experimental parameters like area enclosed and secant stiffness on every loop. After the analytical model was calibrated, the relation between some performance points and damage states observed during the test is studied.
- Open Access
- 28 May 2015
- Published by Bentham Science Publishers Ltd. in The Open Civil Engineering Journal
- Vol. 9 (1) , 236-248
Cyclic Nonlinear Behavior of Pile-Deck Connections Using Structural Software Models
A study of the cyclic nonlinear behavior of a pile-deck connection (characteristic of cargo port structures) is performed using OpenSEES Concrete02 and Concrete07. Advantages and disadvantages are determined by comparison with experimental results obtained in previous works. The parameters considered are: hysteretic energy, secant modulus, and ductility at moderate and severe damage. This work seeks to define whether more complex calculations warrant additional runtime. It is found that Concrete07, in fact, is much closer to the experimental results in terms of ductility. However, the estimates of hysteretic energy and secant modulus are similar in both models. A better vulnerability estimate would be obtained based on more accurate parameters such as ductility, hysteretic energy and secant modulus.
- 28 May 2015
- Published by Bentham Science Publishers Ltd. in The Open Civil Engineering Journal
- Vol. 9 (1) , 236-248
Open AccessCyclic Nonlinear Behavior of Pile-Deck Connections Using Structural Software Models
A study of the cyclic nonlinear behavior of a pile-deck connection (characteristic of cargo port structures) is performed using OpenSEES Concrete02 and Concrete07. Advantages and disadvantages are determined by comparison with experimental results obtained in previous works. The parameters considered are: hysteretic energy, secant modulus, and ductility at moderate and severe damage. This work seeks to define whether more complex calculations warrant additional runtime. It is found that Concrete07, in fact, is much closer to the experimental results in terms of ductility. However, the estimates of hysteretic energy and secant modulus are similar in both models. A better vulnerability estimate would be obtained based on more accurate parameters such as ductility, hysteretic energy and secant modulus.