Liubomyr Poberezhny
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Liubomyr Poberezhny has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Pavlo Maruschak
Department of Automation of Technological Processes and Production, Ternopil Ivan Puluj National Technical University, 46001 Ternopil, Ukraine
8 shared publications - Liubov Poberezhna
Ivano-Frankivsk National Technical University of Oil and Gas
6 shared publications - Andrii Hrytsanchuk
Ivano-Frankivsk National Technical University of Oil and Gas
5 shared publications - Pavlo Popovych
West Ukrainian National University
4 shared publications Iryna Danyliuk
3 shared publications- Oleg Mandryk
Ivano-Frankivsk National Technical University of Oil and Gas
3 shared publications
Latest Publications
- Open Access
- 1 June 2024
- Published by West Ukrainian National University in JOURNAL OF EUROPEAN ECONOMY
- Vol. 23 (Vol 23, No) , 322-335
CLIMATE-NEUTRAL IMMANENCE OF SUSTAINABLE RESOURCE USE OF ENTERPRISES: METHODOLOGICAL PREREQUISITES FOR CREATING AGRO-ENERGY CLUSTERS
Climate change and the scarcity of natural resources necessitate a reevaluation of corporate behavior and enterprise ecosystem towards resource efficiency and climate neutrality. Particular importance is given to rethinking the content and components of the sustainable resource use paradigm based on cross-sectoral interaction. In the context of transitioning to a low-carbon economy, which involves the decarbonization of energy through the diversification of renewable energy sources, including the processing of agrobiomass (energy plant resources) into biofuels, the creation of agro-energy clusters becomes a priority for strengthening energy and environmental security. The aim of the article is to theoretically and methodologically substantiate the convergence of the sustainable resource use paradigm under conditions of corporate climate neutrality, to elucidate the climate-neutral immanence of sustainable resource use of enterprises, and to determine the methodological prerequisites for the creation of agro-energy clusters based on resource efficiency and climate neutrality. The main provisions of modern resource concepts of sustainable development in the energy market have been systematized. A scientific contradiction in the area of resource use and climate neutrality has been noted. It has been found that the basis for distinguishing the climate-neutral immanence of sustainable resource use of enterprises is the principles of the circular economy, inclusive development, and crosssectoral interaction of enterprises. Considering this, the methodological prerequisites for the creation of agro-energy clusters include the principles of resource concepts, integration methods for incorporating the climate component into eco-energy security, optimization approaches to resource utilization, principles of transitivity in organizational innovation processes, and climate innovation in eco-energy management of enterprises. The assertion of climate-neutral immanence in sustainable resource utilization by enterprises indicates the formation of a climate paradigm of sustainable resource use in the energy market. Consequently, there is a need to conduct scientific investigations to define indicators for achieving systemic-process effects and to develop organizational-innovative tools for the management mechanism of functioning climate agro-energy clusters.
- 1 June 2024
- Published by West Ukrainian National University in JOURNAL OF EUROPEAN ECONOMY
- Vol. 23 (Vol 23, No) , 322-335
Open AccessCLIMATE-NEUTRAL IMMANENCE OF SUSTAINABLE RESOURCE USE OF ENTERPRISES: METHODOLOGICAL PREREQUISITES FOR CREATING AGRO-ENERGY CLUSTERS
Climate change and the scarcity of natural resources necessitate a reevaluation of corporate behavior and enterprise ecosystem towards resource efficiency and climate neutrality. Particular importance is given to rethinking the content and components of the sustainable resource use paradigm based on cross-sectoral interaction. In the context of transitioning to a low-carbon economy, which involves the decarbonization of energy through the diversification of renewable energy sources, including the processing of agrobiomass (energy plant resources) into biofuels, the creation of agro-energy clusters becomes a priority for strengthening energy and environmental security. The aim of the article is to theoretically and methodologically substantiate the convergence of the sustainable resource use paradigm under conditions of corporate climate neutrality, to elucidate the climate-neutral immanence of sustainable resource use of enterprises, and to determine the methodological prerequisites for the creation of agro-energy clusters based on resource efficiency and climate neutrality. The main provisions of modern resource concepts of sustainable development in the energy market have been systematized. A scientific contradiction in the area of resource use and climate neutrality has been noted. It has been found that the basis for distinguishing the climate-neutral immanence of sustainable resource use of enterprises is the principles of the circular economy, inclusive development, and crosssectoral interaction of enterprises. Considering this, the methodological prerequisites for the creation of agro-energy clusters include the principles of resource concepts, integration methods for incorporating the climate component into eco-energy security, optimization approaches to resource utilization, principles of transitivity in organizational innovation processes, and climate innovation in eco-energy management of enterprises. The assertion of climate-neutral immanence in sustainable resource utilization by enterprises indicates the formation of a climate paradigm of sustainable resource use in the energy market. Consequently, there is a need to conduct scientific investigations to define indicators for achieving systemic-process effects and to develop organizational-innovative tools for the management mechanism of functioning climate agro-energy clusters.
- 16 February 2024
- Published by Springer Nature
- p. 307-316
Operational Risks When Transporting Gas and Gas-Hydrogen Mixtures Through Existing Gas Pipelines
- 16 February 2024
- Published by Springer Nature
- p. 307-316
Operational Risks When Transporting Gas and Gas-Hydrogen Mixtures Through Existing Gas Pipelines
- Open Access
- 25 January 2023
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 25 (1) , B52-B61
Influence of the Technical Condition of the Running System of Articulated Buses on Stability of Their Straight-Line Motion
Among the most important operational properties of articulated buses, ensuring their safety, it is necessary to note the course stability of traffic (CST), as often the loss of CST of a vehicle is accompanied by an accident. The parameters of ...
- 25 January 2023
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 25 (1) , B52-B61
Open AccessInfluence of the Technical Condition of the Running System of Articulated Buses on Stability of Their Straight-Line Motion
Among the most important operational properties of articulated buses, ensuring their safety, it is necessary to note the course stability of traffic (CST), as often the loss of CST of a vehicle is accompanied by an accident. The parameters of ...
- 1 January 2022
- Published by Springer Nature
- p. 717-725
Assessment of Environmental Risks of the Gas Transportation Process by Main Pipelines
- 1 January 2022
- Published by Springer Nature
- p. 717-725
Assessment of Environmental Risks of the Gas Transportation Process by Main Pipelines
- Open Access
- 1 January 2022
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 24 (1) , B1-B8
Determination of Thermomechanical Stresses in Elements of Vehicles' Braking Systems
The main objective of the study was to develop a model and analyze the thermomechanical behavior of the hub material of the vehicle brake disk. The simulation strategy was based on the solution of the three-dimensional problem of the theory of...
- 1 January 2022
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 24 (1) , B1-B8
Open AccessDetermination of Thermomechanical Stresses in Elements of Vehicles' Braking Systems
The main objective of the study was to develop a model and analyze the thermomechanical behavior of the hub material of the vehicle brake disk. The simulation strategy was based on the solution of the three-dimensional problem of the theory of...
- Open Access
- 4 January 2021
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 23 (1) , B58-B64
Calculation of the Vehicles Stress-Deformed State while Transporting the Liquid Cargo
To calculate the stress-deformed state of road-tanker metal structures during the liquid cargo transportation, the solution for bending axially and symmetrically loaded circular plates is proposed, which is based on the theory of elasticity ap...
- 4 January 2021
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 23 (1) , B58-B64
Open AccessCalculation of the Vehicles Stress-Deformed State while Transporting the Liquid Cargo
To calculate the stress-deformed state of road-tanker metal structures during the liquid cargo transportation, the solution for bending axially and symmetrically loaded circular plates is proposed, which is based on the theory of elasticity ap...
- 1 January 2021
- Published by Lviv Polytechnic National University in Environmental Problems
- Vol. 6 (3) , 188-194
RISK ANALYSIS OF NATURAL GAS TRANSPORTATION PROCESSES
The problem of ensuring technological reliability and environmental friendliness of the natural gas transportation process, the main approaches to risk assessment and management at industrial facilities are considered. To increase the trouble-free operation of the gas transmission system, a comprehensive risk management system is proposed. The research of an ecological condition of the ground layer of air is being done in Bogorodchany district based on the constructed maps, which represent a distribution of harmful matters concentrations, its coefficients and also the coefficients of ecological danger and the map of a total contaminating index. The general chart of ecological risk is represented. Analysis of objects for gas transportation is made. The method of area detonating calculation and distance of mixture explosive cloud distribution is considered during the damage at the main gas pipeline. Area detonating calculations and the distance of mixture explosive cloud distribution are conducted at different wind speeds.
- 1 January 2021
- Published by Lviv Polytechnic National University in Environmental Problems
- Vol. 6 (3) , 188-194
RISK ANALYSIS OF NATURAL GAS TRANSPORTATION PROCESSES
The problem of ensuring technological reliability and environmental friendliness of the natural gas transportation process, the main approaches to risk assessment and management at industrial facilities are considered. To increase the trouble-free operation of the gas transmission system, a comprehensive risk management system is proposed. The research of an ecological condition of the ground layer of air is being done in Bogorodchany district based on the constructed maps, which represent a distribution of harmful matters concentrations, its coefficients and also the coefficients of ecological danger and the map of a total contaminating index. The general chart of ecological risk is represented. Analysis of objects for gas transportation is made. The method of area detonating calculation and distance of mixture explosive cloud distribution is considered during the damage at the main gas pipeline. Area detonating calculations and the distance of mixture explosive cloud distribution are conducted at different wind speeds.
- Open Access
- 29 December 2020
- Published by Ivano-Frankivsk National Technical University of Oil and Gas in Oil and Gas Power Engineering
- No. 2(34),p. 56-66
Analysis of the stress-deformed state of pipelines during plunging
Recently, there has been a need to carry out work on deepening the pipeline (plunging) in some areas, where the depth of pipeline location was found to be inconsistent with the relevant standards. That is, pipelines during operation can be partially opened as a result of soil erosion, and they also tend to lose stability as a result of various factors (pressure, temperature, soil water content, etc.) and rise up (float). Also, the facts of laying pipelines in the process of their construction not to the design marks are known, due to the "low" construction conduct, that is, when the pipeline in some sections was in a trench, the depth of which did not correspond to the project. Further operation of such pipelines may be under the threat of the pipeline coming to the surface and mechanical damage to the insulation and the pipe body. Therefore, to ensure reliable operation of the pipeline, which has got raised sections, it is necessary to lower these sections to the design marks. To do this, it is necessary to develop equipmentand technology for repair work of this type. Therefore, the article considers two options for post-trenchingpipelines: lowering under its own weight without supporting and lowering with the maintenance of the pipeline by a supporting machine. For both methods of plunging, the stress-strain state of the pipeline was simulated during its lowering to the design level on the created mathematical model. An algorithm for calculating the geometric parameters of work performance, determining the stress state and checking the strength of the pipeline has been proposed.
- 29 December 2020
- Published by Ivano-Frankivsk National Technical University of Oil and Gas in Oil and Gas Power Engineering
- No. 2(34),p. 56-66
Open AccessAnalysis of the stress-deformed state of pipelines during plunging
Recently, there has been a need to carry out work on deepening the pipeline (plunging) in some areas, where the depth of pipeline location was found to be inconsistent with the relevant standards. That is, pipelines during operation can be partially opened as a result of soil erosion, and they also tend to lose stability as a result of various factors (pressure, temperature, soil water content, etc.) and rise up (float). Also, the facts of laying pipelines in the process of their construction not to the design marks are known, due to the "low" construction conduct, that is, when the pipeline in some sections was in a trench, the depth of which did not correspond to the project. Further operation of such pipelines may be under the threat of the pipeline coming to the surface and mechanical damage to the insulation and the pipe body. Therefore, to ensure reliable operation of the pipeline, which has got raised sections, it is necessary to lower these sections to the design marks. To do this, it is necessary to develop equipmentand technology for repair work of this type. Therefore, the article considers two options for post-trenchingpipelines: lowering under its own weight without supporting and lowering with the maintenance of the pipeline by a supporting machine. For both methods of plunging, the stress-strain state of the pipeline was simulated during its lowering to the design level on the created mathematical model. An algorithm for calculating the geometric parameters of work performance, determining the stress state and checking the strength of the pipeline has been proposed.
- Open Access
- 1 September 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 28 (3) , 141-147
INFLUENCE OF HYDRATE FORMATION AND CONCENTRATION OF SALTS ON THE CORROSION OF STEEL 20 PIPELINES
One of the ways to increase natural gas production is to conserve and/or intensify existing wells with their subsequent development. They are characterized by a high content of highly mineralized water, which leads to an increased risk of hydrate formation and internal corrosion. The issue of the formation of gas hydrates in industrial pipelines, which is a major problem for the exploitation of industrial gas pipelines, requires considerable attention to be made to exclude emergency situations. The main task of the study - to determine the effect of hydrates on the corrosion of the pipeline in order to prevent emergencies. A technique for studying the effect of hydration on the corrosion of pipelines has been developed. The combined analysis of the corrosion behavior of pipe material in aggressive media of chloride type was done. According to the results of corrosion-mechanical tests, regularities of joint action of mechanical stresses, concentration of chlorides and hydrate formation on the speed and localization of corrosion processes are established.
- 1 September 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 28 (3) , 141-147
Open AccessINFLUENCE OF HYDRATE FORMATION AND CONCENTRATION OF SALTS ON THE CORROSION OF STEEL 20 PIPELINES
One of the ways to increase natural gas production is to conserve and/or intensify existing wells with their subsequent development. They are characterized by a high content of highly mineralized water, which leads to an increased risk of hydrate formation and internal corrosion. The issue of the formation of gas hydrates in industrial pipelines, which is a major problem for the exploitation of industrial gas pipelines, requires considerable attention to be made to exclude emergency situations. The main task of the study - to determine the effect of hydrates on the corrosion of the pipeline in order to prevent emergencies. A technique for studying the effect of hydration on the corrosion of pipelines has been developed. The combined analysis of the corrosion behavior of pipe material in aggressive media of chloride type was done. According to the results of corrosion-mechanical tests, regularities of joint action of mechanical stresses, concentration of chlorides and hydrate formation on the speed and localization of corrosion processes are established.
- Open Access
- 17 July 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 28 (3) , 202-208
Optimal Gas Transport Management Taking into Account Reliability Factor
In the period of shortage of gas supply, special attention is given to reducing the supply of gas to its consumers, that is, their complete and uninterrupted gas supply. Increasing gas losses associated with technological transportation costs, in particular caused by gas flow instability and frequent changes in gas transmission network operating modes. Considering losses due to unreliability of gas pumping is one of the important tasks of gas supply optimization. The purpose of the study is to develop an optimization mathematical model that will simultaneously take into account the factors of reliability and minimum lossesIn the general case, the optimization calculations of the modes of operation of the main gas pipelines are intended to solve three main problems: determining the maximum productivity, calculating the optimal mode with a given productivity and choosing the optimal strategy, the development of the pipeline. On the basis of approaches of simulation modeling of complex systems, a multi-parameter mathematical model of gas supply process optimization was developed. It is shown that a comparative analysis of the forecast and actual indicators of the operating modes of the plunger gas pumping unit shows their satisfactory convergence. The performance of the compressor operation period in the process of injection according to the forecast deviates from the actual value for the whole period of operation of the plunger gas pumping unit in 2016 by 2.98%. The optimization problem of gas pumping planning is considered, taking into account the expected losses, on the basis of which the transfer of the controlled system from the initial state to the final one is carried out by such a sequence of states that minimizes the total cost of the system evolution.
- 17 July 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 28 (3) , 202-208
Open AccessOptimal Gas Transport Management Taking into Account Reliability Factor
In the period of shortage of gas supply, special attention is given to reducing the supply of gas to its consumers, that is, their complete and uninterrupted gas supply. Increasing gas losses associated with technological transportation costs, in particular caused by gas flow instability and frequent changes in gas transmission network operating modes. Considering losses due to unreliability of gas pumping is one of the important tasks of gas supply optimization. The purpose of the study is to develop an optimization mathematical model that will simultaneously take into account the factors of reliability and minimum lossesIn the general case, the optimization calculations of the modes of operation of the main gas pipelines are intended to solve three main problems: determining the maximum productivity, calculating the optimal mode with a given productivity and choosing the optimal strategy, the development of the pipeline. On the basis of approaches of simulation modeling of complex systems, a multi-parameter mathematical model of gas supply process optimization was developed. It is shown that a comparative analysis of the forecast and actual indicators of the operating modes of the plunger gas pumping unit shows their satisfactory convergence. The performance of the compressor operation period in the process of injection according to the forecast deviates from the actual value for the whole period of operation of the plunger gas pumping unit in 2016 by 2.98%. The optimization problem of gas pumping planning is considered, taking into account the expected losses, on the basis of which the transfer of the controlled system from the initial state to the final one is carried out by such a sequence of states that minimizes the total cost of the system evolution.