Małgorzata Pawłowska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Małgorzata Pawłowska has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Magdalena Zdeb
Lublin Univ Technol, Fac Environm Engn, Ul Nadbystrzycka 40B, PL-20618 Lublin, Poland
6 shared publications - Artur Pawłowski
Faculty of Environmental Engineering, Lublin University of Technology, Nadbystrzycka 40B, 20-618 Lublin, Poland
4 shared publications - Grzegorz Świderski
Department of Chemistry, Biology and Biotechnology, Institute of Civil Engineering and Energetics, Faculty of Civil Engineering and Environmental Science, Bialystok University of Technology, Wiejska 45E Street, 15-351 Bialystok, Poland
3 shared publications - Justyna Kujawska
Faculty of Environmental Engineering, Lublin University of Technology, 20-618 Lublin, Poland
3 shared publications - Lucjan Pawłowski
Faculty of Environmental Engineering, Lublin University of Technology, 20-618 Lublin, Poland
3 shared publications - Monika Kalinowska
Department of Chemistry, Biology and Biotechnology, Institute of Civil Engineering and Energetics, Faculty of Civil Engineering and Environmental Science, Bialystok University of Technology, Wiejska 45E Street, 15-351 Bialystok, Poland
3 shared publications
Latest Publications
- Open Access
Polylactide Composites with Mineral Fertilisers—Properties and Biodegradation
Polylactide (PLA) composites were prepared and doped with starch (10% by weight), and mineral salts used as mineral fertilisers (MgSO4, KNO3, Ca(NO3)2 and Ca3(PO4)2) were prepared. The content of the added fertilisers was 2% by mass in the composites. The tensile strength properties of the obtained composites were tested. The effect of the addition of fertilisers on the structure of polylactide was analysed using spectroscopic methods (FTIR and FTRaman). The thermal properties of the obtained composites were tested using thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC). PLA composites with fertilisers were tested for biodegradability in two types of soil—field soil and horticultural soil—and in compost. Biodegradability was assessed based on the mass loss of biodegraded composites, spectroscopic tests and visual assessment of changes occurring in the composites. Tests were performed on the respiratory activity of microorganisms in the compost extract in which the tested composites were placed. The addition of mineral salts used in the tested composites significantly influenced the biodegradation rate of the composites. Mineral compounds (MgSO4, KNO3 and Ca(NO3)2) added to the PLA–starch composite improve its mechanical properties. It should also be noted that the addition of mineral salts to the prepared composites did not affect the chemical structure of polylactide. The addition of mineral salts to PLA also did not significantly affect its thermal properties, as demonstrated by DSC and TG thermal analysis.
Open AccessPolylactide Composites with Mineral Fertilisers—Properties and Biodegradation
Polylactide (PLA) composites were prepared and doped with starch (10% by weight), and mineral salts used as mineral fertilisers (MgSO4, KNO3, Ca(NO3)2 and Ca3(PO4)2) were prepared. The content of the added fertilisers was 2% by mass in the composites. The tensile strength properties of the obtained composites were tested. The effect of the addition of fertilisers on the structure of polylactide was analysed using spectroscopic methods (FTIR and FTRaman). The thermal properties of the obtained composites were tested using thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC). PLA composites with fertilisers were tested for biodegradability in two types of soil—field soil and horticultural soil—and in compost. Biodegradability was assessed based on the mass loss of biodegraded composites, spectroscopic tests and visual assessment of changes occurring in the composites. Tests were performed on the respiratory activity of microorganisms in the compost extract in which the tested composites were placed. The addition of mineral salts used in the tested composites significantly influenced the biodegradation rate of the composites. Mineral compounds (MgSO4, KNO3 and Ca(NO3)2) added to the PLA–starch composite improve its mechanical properties. It should also be noted that the addition of mineral salts to the prepared composites did not affect the chemical structure of polylactide. The addition of mineral salts to PLA also did not significantly affect its thermal properties, as demonstrated by DSC and TG thermal analysis.
- Open Access
- 19 August 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (16) , 8013
Bioactive Properties of Selected European Phellinus Species: A Comprehensive Study
This study conducted a multi-directional evaluation of the chemical potential and biological properties of selected European fungal species of the genus Phellinus. We investigated 30 samples belonging to 22 Phellinus species. Fruiting bodies were collected, among other specimens, in the Białowieża Forest (Poland); Village Kozhle (North Macedonia); Estremadura, Sesimbra, and Lagoa de Albufeira (Portugal); Zlatari close to Prishtina (Kosovo); and Spoleto and the Bosco Siro Negri State Nature Reserve (Italy). Morphological identification of the collected fungi was carried out, and genetic tests were performed to confirm the identity of the collected specimens. Methanol extracts for biological activity tests were prepared. Screening of antimicrobial activity of 30 methanolic extracts was performed on strains of bacteria (Klebsiella pneumoniae, Pseudomonas aeruginosa, Staphylococcus aureus, Staphylococcus epidermidis, and Kocuria rhizophila) and fungi (Candida albicans). Antioxidant activity tests (DPPH and ABTS) were also performed. The three most biologically active fungi species were selected (Phellinus igniarius, Fomitiporia robusta, and Porodaedalea pini) for further research. The chemical composition of the extracts was determined using GC-MS analysis. Thermal decomposition studies and spectroscopic analysis of the dry fruiting bodies were performed. The extracts were tested for their antimicrobial activity against antibiotic-resistant bacteria. Cytotoxic activity was also tested.
- 19 August 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (16) , 8013
Open AccessBioactive Properties of Selected European Phellinus Species: A Comprehensive Study
This study conducted a multi-directional evaluation of the chemical potential and biological properties of selected European fungal species of the genus Phellinus. We investigated 30 samples belonging to 22 Phellinus species. Fruiting bodies were collected, among other specimens, in the Białowieża Forest (Poland); Village Kozhle (North Macedonia); Estremadura, Sesimbra, and Lagoa de Albufeira (Portugal); Zlatari close to Prishtina (Kosovo); and Spoleto and the Bosco Siro Negri State Nature Reserve (Italy). Morphological identification of the collected fungi was carried out, and genetic tests were performed to confirm the identity of the collected specimens. Methanol extracts for biological activity tests were prepared. Screening of antimicrobial activity of 30 methanolic extracts was performed on strains of bacteria (Klebsiella pneumoniae, Pseudomonas aeruginosa, Staphylococcus aureus, Staphylococcus epidermidis, and Kocuria rhizophila) and fungi (Candida albicans). Antioxidant activity tests (DPPH and ABTS) were also performed. The three most biologically active fungi species were selected (Phellinus igniarius, Fomitiporia robusta, and Porodaedalea pini) for further research. The chemical composition of the extracts was determined using GC-MS analysis. Thermal decomposition studies and spectroscopic analysis of the dry fruiting bodies were performed. The extracts were tested for their antimicrobial activity against antibiotic-resistant bacteria. Cytotoxic activity was also tested.
- Open Access
State and Perspectives of Biomethane Production and Use—A Systematic Review
In the face of increasingly frequent natural disasters resulting from climate change and disruptions in the supply chains of energy resources, the demand for energy carriers based on locally sourced renewable resources is growing. Biomethane, derived from biomass and having multiple uses in the energy sector, fully meets these conditions. Analyses of the development and spatial distribution of biomethane production plants, the prevalence of methods of its production, and directions of applications, made on the basis of the data gained from official databases and research papers, are the main subjects of the paper. Additionally, the advantages and disadvantages of biomethane production, taking into account the results of the life cycle assessments, and the prospects for development of the biomethane market, facing regulatory and policy challenges, are considered. The results of the review indicate that biomethane production is currently concentrated in Europe and North America, which together generate over 80% of the globally produced biomethane. An exponential growth of the number of biomethane plants and their production capacities has been observed over the last decade. Assuming that the global strategies currently adopted and the resulting regional and national regulations on environmental and socio-economic policies are maintained, the further intensive development of the biomethane market will be expected in the near future.
Open AccessState and Perspectives of Biomethane Production and Use—A Systematic Review
In the face of increasingly frequent natural disasters resulting from climate change and disruptions in the supply chains of energy resources, the demand for energy carriers based on locally sourced renewable resources is growing. Biomethane, derived from biomass and having multiple uses in the energy sector, fully meets these conditions. Analyses of the development and spatial distribution of biomethane production plants, the prevalence of methods of its production, and directions of applications, made on the basis of the data gained from official databases and research papers, are the main subjects of the paper. Additionally, the advantages and disadvantages of biomethane production, taking into account the results of the life cycle assessments, and the prospects for development of the biomethane market, facing regulatory and policy challenges, are considered. The results of the review indicate that biomethane production is currently concentrated in Europe and North America, which together generate over 80% of the globally produced biomethane. An exponential growth of the number of biomethane plants and their production capacities has been observed over the last decade. Assuming that the global strategies currently adopted and the resulting regional and national regulations on environmental and socio-economic policies are maintained, the further intensive development of the biomethane market will be expected in the near future.
- Open Access
Study of the Relationship Between the Structures and Biological Activity of Herbicides Derived from Phenoxyacetic Acid
Chloroderivatives of phenoxyacetic acid are a group of compounds commonly used as plant protection products. Differences in the molecular structure of these compounds are related to varying substitution and the number of chlorine atoms in the aromatic ring. Different molecular structures may affect the activity of these compounds, their physicochemical properties, as well as their toxicity and biological effects. A group of 6 chemical compounds derived from phenoxyacetic acid was tested. The molecular structure was analysed using spectroscopic methods (FTIR, FTRaman, UV-VIS, 1HNMR, 13CNMR) and quantum chemical computational methods (DFT). The reactivity of the tested compounds was determined using DFT calculations and experimentally in reaction with a hydroxyl radical. The electronic charge distribution of NBO, CHelpG and ESP was analysed and aromaticity indices were calculated for theoretically modeled structures and structures examined by X-ray diffraction (data obtained from the CSD database). Phenoxyacetic acid derivatives were tested for antimicrobial activity on soil bacterial strains. Cytotoxicity tests were performed on normal human skin fibroblasts (BJ CRL-2522) and the human prostate cancer cell line (DU-145 HTB-81). The purpose of this study was to investigate the relationship between the molecular structure of phenoxyacetic acid derivatives and their reactivity and biological activity.
Open AccessStudy of the Relationship Between the Structures and Biological Activity of Herbicides Derived from Phenoxyacetic Acid
Chloroderivatives of phenoxyacetic acid are a group of compounds commonly used as plant protection products. Differences in the molecular structure of these compounds are related to varying substitution and the number of chlorine atoms in the aromatic ring. Different molecular structures may affect the activity of these compounds, their physicochemical properties, as well as their toxicity and biological effects. A group of 6 chemical compounds derived from phenoxyacetic acid was tested. The molecular structure was analysed using spectroscopic methods (FTIR, FTRaman, UV-VIS, 1HNMR, 13CNMR) and quantum chemical computational methods (DFT). The reactivity of the tested compounds was determined using DFT calculations and experimentally in reaction with a hydroxyl radical. The electronic charge distribution of NBO, CHelpG and ESP was analysed and aromaticity indices were calculated for theoretically modeled structures and structures examined by X-ray diffraction (data obtained from the CSD database). Phenoxyacetic acid derivatives were tested for antimicrobial activity on soil bacterial strains. Cytotoxicity tests were performed on normal human skin fibroblasts (BJ CRL-2522) and the human prostate cancer cell line (DU-145 HTB-81). The purpose of this study was to investigate the relationship between the molecular structure of phenoxyacetic acid derivatives and their reactivity and biological activity.
- Open Access
- 1 September 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 25 (9) , 242-251
Efficiency of Low Temperature Chemical Pretreatment of Fruit and Vegetable Pomace
Subjecting lignocellulosic substrates to anaerobic digestion is a promising way of renewable energy obtaining. This method of generating energy is consistent with the sustainable development. In order to destroy the biodegradation-resistant structure of lignocellulosic materials before directing...
- 1 September 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 25 (9) , 242-251
Open AccessEfficiency of Low Temperature Chemical Pretreatment of Fruit and Vegetable Pomace
Subjecting lignocellulosic substrates to anaerobic digestion is a promising way of renewable energy obtaining. This method of generating energy is consistent with the sustainable development. In order to destroy the biodegradation-resistant structure of lignocellulosic materials before directing...
- Open Access
Catch and Cover Crops’ Use in the Energy Sector via Conversion into Biogas—Potential Benefits and Disadvantages
The development of civilization is related to an increase in energy demand, while its production is still based mainly on fossil fuels. The release of carbon into the environment, which disturbs the balance of the global system, is the consequence of using these fuels. One possible way to reduce the carbon footprint of the energy sector is the widespread use of cover crops’ biomass for energy production. The aim of this paper is to critically review the knowledge on the dissemination of catch and cover crops’ cultivation in different regions of the world, and the yield, chemical composition and biomethane potential of their biomass. Additionally, the environmental benefits, as well as the challenges and opportunities associated with this biomass use in the energy sector, are considered. The review showed that the aboveground biomass of cover and catch crops is a valuable source for the production of bioenergy in biogas plants. However, the key role of these crops is to prevent soil degradation. Therefore, changes in biomass target use must be preceded by a multi-aspect analysis that allows their impact on the environment to be assessed.
Open AccessCatch and Cover Crops’ Use in the Energy Sector via Conversion into Biogas—Potential Benefits and Disadvantages
The development of civilization is related to an increase in energy demand, while its production is still based mainly on fossil fuels. The release of carbon into the environment, which disturbs the balance of the global system, is the consequence of using these fuels. One possible way to reduce the carbon footprint of the energy sector is the widespread use of cover crops’ biomass for energy production. The aim of this paper is to critically review the knowledge on the dissemination of catch and cover crops’ cultivation in different regions of the world, and the yield, chemical composition and biomethane potential of their biomass. Additionally, the environmental benefits, as well as the challenges and opportunities associated with this biomass use in the energy sector, are considered. The review showed that the aboveground biomass of cover and catch crops is a valuable source for the production of bioenergy in biogas plants. However, the key role of these crops is to prevent soil degradation. Therefore, changes in biomass target use must be preceded by a multi-aspect analysis that allows their impact on the environment to be assessed.
- 26 July 2023
- Published by Polish Academy of Sciences Chancellery in Gospodarka Surowcami Mineralnymi - Mineral Resources Management
- Vol. 35 (1) , 165-176
Characteristic of carbon dioxide absorption by cereals in Poland and China
- 26 July 2023
- Published by Polish Academy of Sciences Chancellery in Gospodarka Surowcami Mineralnymi - Mineral Resources Management
- Vol. 35 (1) , 165-176
Characteristic of carbon dioxide absorption by cereals in Poland and China
- Open Access
Strategies of Climate Change Mitigation in Agriculture Plant Production—A Critical Review
Agriculture is the second-highest, after energy use, source of greenhouse gas emissions, which are released from soils and animal digestion processes and as a result of energy consumption at various stages of agricultural production. However, changes in the management of agricultural systems may mitigate the negative impact of this sector on the atmosphere and climate. This paper presents a literature review on energy consumption in agriculture and the potential of agricultural crop production to assist in mitigation of global warming by increasing absorption of CO2 from the atmosphere. The issue was considered in the context of managing the cultivation of main, catch and cover crops. The potential of carbon sequestration in the above- and below-ground biomass of selected crops was analyzed. It was stated that, depending on the species, main crops can sequester up to 113 CO2 ha−1 yr−1 in whole biomass, while catch or cover crops can sequester up to 14.80 CO2 ha−1 yr−1 and 0.17 CO2 ha−1 yr−1 in the above- and below-ground biomass, respectively. The benefits of the spread of catch or cover crops, such as improvement of soil quality (leading to an increase in primary crop yield by even as much as 65%) and a phytosanitary effect, as well as the barriers that limit the use of catch crops, including the problems with matching crop species to climate and soil conditions and the risk of reducing farmers’ income, were considered. The results of the review show that catch crops can assimilate an additional amount of 4 to 6 tonnes CO2 ha−1 yr−1, and thus, spreading of catch crops is an effective way to reduce the climate impact of agriculture.
Open AccessStrategies of Climate Change Mitigation in Agriculture Plant Production—A Critical Review
Agriculture is the second-highest, after energy use, source of greenhouse gas emissions, which are released from soils and animal digestion processes and as a result of energy consumption at various stages of agricultural production. However, changes in the management of agricultural systems may mitigate the negative impact of this sector on the atmosphere and climate. This paper presents a literature review on energy consumption in agriculture and the potential of agricultural crop production to assist in mitigation of global warming by increasing absorption of CO2 from the atmosphere. The issue was considered in the context of managing the cultivation of main, catch and cover crops. The potential of carbon sequestration in the above- and below-ground biomass of selected crops was analyzed. It was stated that, depending on the species, main crops can sequester up to 113 CO2 ha−1 yr−1 in whole biomass, while catch or cover crops can sequester up to 14.80 CO2 ha−1 yr−1 and 0.17 CO2 ha−1 yr−1 in the above- and below-ground biomass, respectively. The benefits of the spread of catch or cover crops, such as improvement of soil quality (leading to an increase in primary crop yield by even as much as 65%) and a phytosanitary effect, as well as the barriers that limit the use of catch crops, including the problems with matching crop species to climate and soil conditions and the risk of reducing farmers’ income, were considered. The results of the review show that catch crops can assimilate an additional amount of 4 to 6 tonnes CO2 ha−1 yr−1, and thus, spreading of catch crops is an effective way to reduce the climate impact of agriculture.
- Open Access
Efficiency of Chemical Pretreatment of Sugar Beet Pulp Biomass Intended to Energy Production via Biological Processes
Environmentally friendly anaerobic digestion (AD) of lignocellulose-based materials is becoming an increasingly popular alternative to non-renewable energy sources. It also corresponds with the principles of sustainable development. The structure of lignocellulosic materials, which is resistant to biodegradation, requires using pretreatment methods prior to subjecting them to anaerobic processes. The aim of the study was to evaluate the influence of temperature and type of hydrolyzing agent on the efficiency of chemical pretreatment of sugar beet pulp. Biomass samples soaked in distilled water and 0.05 M solutions of NaOH and H2SO4 were left for 20 h, both at room temperature (22 °C) and in a thermostated chamber (50 °C). The changes in pH, electrolytic conductivity (EC), concentration of volatile fatty acids (VFA), dissolved chemical oxygen demand (COD), and phenols were analyzed. The concentration of CODdissolved, demonstrating the efficiency of pretreatment methods, obtained after alkaline hydrolysis conducted at 22 °C was almost at the same level as in the case of acid hydrolysis carried out at 50 °C: 3451 mg dm−3 and 3608.5 mg dm−3, respectively. Hydrolysis carried out in a NaOH solution at 22 °C appears to be the most economical option for sugar beet pulp pretreatment out of all analyzed ones, as there is no need to increase expenditure on heating samples.
Open AccessEfficiency of Chemical Pretreatment of Sugar Beet Pulp Biomass Intended to Energy Production via Biological Processes
Environmentally friendly anaerobic digestion (AD) of lignocellulose-based materials is becoming an increasingly popular alternative to non-renewable energy sources. It also corresponds with the principles of sustainable development. The structure of lignocellulosic materials, which is resistant to biodegradation, requires using pretreatment methods prior to subjecting them to anaerobic processes. The aim of the study was to evaluate the influence of temperature and type of hydrolyzing agent on the efficiency of chemical pretreatment of sugar beet pulp. Biomass samples soaked in distilled water and 0.05 M solutions of NaOH and H2SO4 were left for 20 h, both at room temperature (22 °C) and in a thermostated chamber (50 °C). The changes in pH, electrolytic conductivity (EC), concentration of volatile fatty acids (VFA), dissolved chemical oxygen demand (COD), and phenols were analyzed. The concentration of CODdissolved, demonstrating the efficiency of pretreatment methods, obtained after alkaline hydrolysis conducted at 22 °C was almost at the same level as in the case of acid hydrolysis carried out at 50 °C: 3451 mg dm−3 and 3608.5 mg dm−3, respectively. Hydrolysis carried out in a NaOH solution at 22 °C appears to be the most economical option for sugar beet pulp pretreatment out of all analyzed ones, as there is no need to increase expenditure on heating samples.