Gurukar Shivappa Suresh
Gurukar Shivappa Suresh has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Hanumanthrayappa Manjunatha
Department of Chemistry, GITAM School of Science, GITAM (Deemed to be University), Bangalore, India
6 shared publications T. V. Venkatesha
Kuvempu University
6 shared publications- Jose Savio Melo
Nuclear Agriculture and Biotechnology Division, Bhabha Atomic Research Centre, Trombay, Mumbai, 400 085, India; Homi Bhabha National Institute, Anushakti Nagar, Mumbai, 400 094, India
5 shared publications - Sangaraju Shanmugam
Daegu Gyeongbuk Institute of Science & Technology (DGIST)
5 shared publications Seetharamaiah Nandini
Department of Chemistry and Research Centre, N.M.K.R.V. College for Women, Jayanagar, Bangalore 560 011, India; Department of PG Studies and Research in Biochemistry, Jnana Sahyadri, Kuvempu University, Shankaraghatta, Shimoga 577451, India
5 shared publicationsK. C. Mahesh
SSMRV Degree College
4 shared publications
Latest Publications
- 1 April 2021
- Published by Pleiades Publishing Ltd in Russian Journal of Electrochemistry
- Vol. 57 (4) , 419-433
Chalcone as Anode Material for Aqueous Rechargeable Lithium-Ion Batteries
Utilization of environmental friendly, potentially sustainable, low cost, high capacity organic electrode materials seem to be very promising for next generation rechargeable lithium-ion batteries. In fact, numerous organic materials with electrochemically active carbonyl groups have been effectively stated as electrode materials. Herein, we report an ideal organic species derived from aromatic ketone, namely chalcone (CLN). Synthesis of chalcone has been developed via Claisen–Schmidt condensation of benzaldehyde and acetophenone in the presence of alumina sulfuric acid as environmentally benign, biodegradable and reusable catalyst under solvent-free conditions followed by lithiation using ball-milling method. CLN and lithiated chalcone (LiCLN) was synthesized and characterized using 1H-NMR, XRD and IR spectroscopy techniques. Electrochemical techniques like cyclic voltammetry, galvanostatic cycling with potential limitation and potentio electrochemical impedance were carried out to study the electrochemical properties and performance in saturated aqueous Li2SO4 electrolyte. As an anode material, LiCLN showed exceptional performance such as; good reversible capacity, excellent cyclability and high rate capability when tested in half-cell configuration. The cell LiCLN | aqueous saturated Li2SO4 | LiFePO4 delivered a discharge capacity of 111.23 mA h g–1 at C/8 rate and maintains 91% capacity retention even after 1000 repeated cycles.
- 1 April 2021
- Published by Pleiades Publishing Ltd in Russian Journal of Electrochemistry
- Vol. 57 (4) , 419-433
Chalcone as Anode Material for Aqueous Rechargeable Lithium-Ion Batteries
Utilization of environmental friendly, potentially sustainable, low cost, high capacity organic electrode materials seem to be very promising for next generation rechargeable lithium-ion batteries. In fact, numerous organic materials with electrochemically active carbonyl groups have been effectively stated as electrode materials. Herein, we report an ideal organic species derived from aromatic ketone, namely chalcone (CLN). Synthesis of chalcone has been developed via Claisen–Schmidt condensation of benzaldehyde and acetophenone in the presence of alumina sulfuric acid as environmentally benign, biodegradable and reusable catalyst under solvent-free conditions followed by lithiation using ball-milling method. CLN and lithiated chalcone (LiCLN) was synthesized and characterized using 1H-NMR, XRD and IR spectroscopy techniques. Electrochemical techniques like cyclic voltammetry, galvanostatic cycling with potential limitation and potentio electrochemical impedance were carried out to study the electrochemical properties and performance in saturated aqueous Li2SO4 electrolyte. As an anode material, LiCLN showed exceptional performance such as; good reversible capacity, excellent cyclability and high rate capability when tested in half-cell configuration. The cell LiCLN | aqueous saturated Li2SO4 | LiFePO4 delivered a discharge capacity of 111.23 mA h g–1 at C/8 rate and maintains 91% capacity retention even after 1000 repeated cycles.
- 27 November 2019
- Published by Wiley in ChemistrySelect
- Vol. 4 (44) , 12942-12949
Carbon‐Supported Organic Electrode Materials for Aqueous Rechargeable Lithium‐Ion Batteries
Electro active organic compounds represent one of the most capable electrode materials for the next generation green and sustainable rechargeable lithium ion batteries. In this context, we highlight the synthesis of an organic electrode material of azo derivative; diazoaminobenzene (DAAB) by diazotization method followed by lithiation using conventional technique. The electrochemical performances of the electro‐active species are examined by Cyclic Voltammetry, Galvanostatic Cycling with Potential Limitation and Potentio‐electrochemical Impedance Spectroscopy in an aqueous saturated Li 2 SO 4 electrolyte. DAAB has shown considerable progress in terms of cyclic performance, better rate capability and high reversible capacity. The electroactivity of active species are enhanced by the addition of carboxy‐functionalized carbon nanotubes (CNTs‐COOH) as an additive. The half‐cell of lithiated diazoaminobenzene/CNTs‐COOH (dLiDAAB) vs. SCE delivers a capacity of 173.7 mA h g −1 up to 10 cycles at 0.08 mA. The full cell configuration dLiDAAB | aq. Saturated Li 2 SO 4 | 2‐[1H‐indol‐2‐yl (1H‐indol‐3‐yl) methyl] phenol (b‐IMP) delivered a discharge capacity of 81.99 mA h g −1 in the potential window of −0.2 V to 1.2 V. The battery performance of the cell has been increased significantly by the influence of CNTs‐COOH group with 96.95% columbic efficiency. This agreeable result markably suits this material as an anode in aqueous rechargeable lithium batteries for future needs of energy technology.
- 27 November 2019
- Published by Wiley in ChemistrySelect
- Vol. 4 (44) , 12942-12949
Carbon‐Supported Organic Electrode Materials for Aqueous Rechargeable Lithium‐Ion Batteries
Electro active organic compounds represent one of the most capable electrode materials for the next generation green and sustainable rechargeable lithium ion batteries. In this context, we highlight the synthesis of an organic electrode material of azo derivative; diazoaminobenzene (DAAB) by diazotization method followed by lithiation using conventional technique. The electrochemical performances of the electro‐active species are examined by Cyclic Voltammetry, Galvanostatic Cycling with Potential Limitation and Potentio‐electrochemical Impedance Spectroscopy in an aqueous saturated Li 2 SO 4 electrolyte. DAAB has shown considerable progress in terms of cyclic performance, better rate capability and high reversible capacity. The electroactivity of active species are enhanced by the addition of carboxy‐functionalized carbon nanotubes (CNTs‐COOH) as an additive. The half‐cell of lithiated diazoaminobenzene/CNTs‐COOH (dLiDAAB) vs. SCE delivers a capacity of 173.7 mA h g −1 up to 10 cycles at 0.08 mA. The full cell configuration dLiDAAB | aq. Saturated Li 2 SO 4 | 2‐[1H‐indol‐2‐yl (1H‐indol‐3‐yl) methyl] phenol (b‐IMP) delivered a discharge capacity of 81.99 mA h g −1 in the potential window of −0.2 V to 1.2 V. The battery performance of the cell has been increased significantly by the influence of CNTs‐COOH group with 96.95% columbic efficiency. This agreeable result markably suits this material as an anode in aqueous rechargeable lithium batteries for future needs of energy technology.
- 1 August 2019
- Published by International Association of Advanced Materials in Advanced Materials Letters
- Vol. 10 (8) , 586-594
Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries
- 1 August 2019
- Published by International Association of Advanced Materials in Advanced Materials Letters
- Vol. 10 (8) , 586-594
Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries
- 1 March 2019
- Published by International Association of Advanced Materials in Advanced Materials Letters
- Vol. 10 (3) , 193-200
Triclinic LiVPO4F/C cathode for aqueous rechargeable lithium-ion batteries
- 1 March 2019
- Published by International Association of Advanced Materials in Advanced Materials Letters
- Vol. 10 (3) , 193-200
Triclinic LiVPO4F/C cathode for aqueous rechargeable lithium-ion batteries
- 30 July 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (28) , 8363-8372
Synthesis of 2‐[1H‐indol‐2‐yl(1H‐indol‐3‐yl)methyl]phenol and Its Application in Aqueous Rechargeable Lithium‐Ion Batteries
The present work focuses on a novel synthetic approach for a bis‐Indole derivative and its applications in energy storage devices. Here, an aqueous rechargeable lithium ion battery (ARLIB) with organic active material electrodes of inexpensive and sustainable, bis‐indole derivative called 2‐[1H‐indol‐2‐yl(1H‐indol‐3‐yl)methyl]phenol (b‐IMP) and Lithiated quinizarin (Li‐QZ) are used as cathode and anode respectively in saturated Li 2 SO 4 supporting electrolyte. The electrochemical activities of these organic redox active materials are studied using cyclic voltammetry, galvanostatic charge potential limit and potentiostatic electrochemical impedance spectroscopy methods. The cell b‐IMP | Sat. Li 2 SO 4 | Li‐QZ has delivered an exceptionally better cell‐voltage of 0.7 V with a discharge capacity of 292 mA h g −1 with 92% columbic efficiency even after 300 cycles. The cell comprises of b‐IMP and Li‐QZ as cathode and anode materials respectively, which exhibits remarkable cyclizability with good discharge capacity and thus signifies a major advance in organic ARLIBs.
- 30 July 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (28) , 8363-8372
Synthesis of 2‐[1H‐indol‐2‐yl(1H‐indol‐3‐yl)methyl]phenol and Its Application in Aqueous Rechargeable Lithium‐Ion Batteries
The present work focuses on a novel synthetic approach for a bis‐Indole derivative and its applications in energy storage devices. Here, an aqueous rechargeable lithium ion battery (ARLIB) with organic active material electrodes of inexpensive and sustainable, bis‐indole derivative called 2‐[1H‐indol‐2‐yl(1H‐indol‐3‐yl)methyl]phenol (b‐IMP) and Lithiated quinizarin (Li‐QZ) are used as cathode and anode respectively in saturated Li 2 SO 4 supporting electrolyte. The electrochemical activities of these organic redox active materials are studied using cyclic voltammetry, galvanostatic charge potential limit and potentiostatic electrochemical impedance spectroscopy methods. The cell b‐IMP | Sat. Li 2 SO 4 | Li‐QZ has delivered an exceptionally better cell‐voltage of 0.7 V with a discharge capacity of 292 mA h g −1 with 92% columbic efficiency even after 300 cycles. The cell comprises of b‐IMP and Li‐QZ as cathode and anode materials respectively, which exhibits remarkable cyclizability with good discharge capacity and thus signifies a major advance in organic ARLIBs.
- 22 March 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (11) , 3056-3069
Carbon‐Nanotube‐Encapsulated LiTiOPO 4 Composite Electrode for Aqueous Rechargeable Battery Applications
A Single‐walled carbon nanotube (SWCNTs)‐encapsulated orthorhombic LiTiOPO 4 (LTOP) anode material was explored for use in an aqueous electrolyte. The aqueous rechargeable Li‐ion battery was constructed by using LTOP/SWCNTs anode and LiFePO 4 @C (LFP@C) as a cathode in sat. Li 2 SO 4 aqueous electrolyte. The LTOP has been synthesized by using a very simple method through a single‐step procedure. Quantitative structural and morphological features of LTOP have been studied via X‐ray diffraction, Raman spectra, scanning electron microscopic, energy dispersive X‐ray analysis, BET surface area analysis and transmission electron microscopy studies. The electrochemical properties and performance of the battery have been evaluated in half‐cell (LTOP/SWCNTs vs. SCE) as well as a full‐cell configuration with LFP@C as a cathode. Cyclic voltammetry (CV) was carried out to determine the redox properties and stability. After the CV, electrochemical performance and properties of LTOP/SWCNTs were evaluated through galvanostatic cycling with potential limitation and electrochemical impedance spectroscopic techniques. Further, we have also demonstrated the electrochemical performance and properties of LTOP/SWCNTs composite in the non‐aqueous electrolyte.
- 22 March 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (11) , 3056-3069
Carbon‐Nanotube‐Encapsulated LiTiOPO 4 Composite Electrode for Aqueous Rechargeable Battery Applications
A Single‐walled carbon nanotube (SWCNTs)‐encapsulated orthorhombic LiTiOPO 4 (LTOP) anode material was explored for use in an aqueous electrolyte. The aqueous rechargeable Li‐ion battery was constructed by using LTOP/SWCNTs anode and LiFePO 4 @C (LFP@C) as a cathode in sat. Li 2 SO 4 aqueous electrolyte. The LTOP has been synthesized by using a very simple method through a single‐step procedure. Quantitative structural and morphological features of LTOP have been studied via X‐ray diffraction, Raman spectra, scanning electron microscopic, energy dispersive X‐ray analysis, BET surface area analysis and transmission electron microscopy studies. The electrochemical properties and performance of the battery have been evaluated in half‐cell (LTOP/SWCNTs vs. SCE) as well as a full‐cell configuration with LFP@C as a cathode. Cyclic voltammetry (CV) was carried out to determine the redox properties and stability. After the CV, electrochemical performance and properties of LTOP/SWCNTs were evaluated through galvanostatic cycling with potential limitation and electrochemical impedance spectroscopic techniques. Further, we have also demonstrated the electrochemical performance and properties of LTOP/SWCNTs composite in the non‐aqueous electrolyte.
- 13 October 2016
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 47 (1) , 1-12
Enhanced electrochemical performance of LiVPO4F/f-graphene composite electrode prepared via ionothermal process
- 13 October 2016
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 47 (1) , 1-12
Enhanced electrochemical performance of LiVPO4F/f-graphene composite electrode prepared via ionothermal process
- 1 June 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (65) , 60693-60703
A novel bioassay based gold nanoribbon biosensor to aid the preclinical evaluation of anticancer properties
In this work, we report a microbial biosensor fabricated for the preclinical assay of anticancer compounds. Gold nanoribbons were used as a transducer for mounting the microbe. For the synthesis of these unique Au nanostructures, quercetin stabilized gold nanoparticles (Q-AuNPs) were synthesized as a first step using onion peel. Later, dityrosine peptide was used as a sacrificial template for the synthesis of the gold nanoribbons (AuNRs). The structural morphology of the as-synthesized Au nanomaterial was examined using UV spectroscopy, XRD, SEM and TEM. The AuNRs were found to be Agrobacterium tumefaciens (At), a causative agent of crown gall disease. At is reported to cause tumors in plants through a tumorigenic mechanism similar to that of humans. Inhibition of At indicates that the inhibitory compound being screened exhibits anticancer activity. Clitoria ternatea (Ct) is traditionally used to cure many diseases and is known to possess anticancer activity. Therefore, we have used a Ct flower extract in the preclinical study of its anticancer activity against At by fabricating a simple electrochemical sensor. We have employed electrochemical techniques such as CV and EIS for the characterization of the developed microbial biosensor. Moreover, the as-synthesized AuNRs behave as an ideal transducer and platform, thus improving the electrode surface area and providing good biocompatibility for the immobilization of At. In contrast to other immobilization techniques and biosensors that often require elaborate procedures, cross-linking agents and rigorous chemical reactions, At was directly adsorbed onto the electrode under optimum conditions without any mediators. The results show that the developed biosensor is useful in the pre-clinical analysis of anticancer properties. Indeed the study examines the use of electrochemistry, demonstrating the rapid response and high sensitivity of the proposed sensor in contrast to bioassay procedures. In conclusion, the experimental results indicate that the developed biosensor accentuates the excellent properties of the synthesized AuNRs, which promises to be a novel avenue in designing biosensors.
- 1 June 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (65) , 60693-60703
A novel bioassay based gold nanoribbon biosensor to aid the preclinical evaluation of anticancer properties
In this work, we report a microbial biosensor fabricated for the preclinical assay of anticancer compounds. Gold nanoribbons were used as a transducer for mounting the microbe. For the synthesis of these unique Au nanostructures, quercetin stabilized gold nanoparticles (Q-AuNPs) were synthesized as a first step using onion peel. Later, dityrosine peptide was used as a sacrificial template for the synthesis of the gold nanoribbons (AuNRs). The structural morphology of the as-synthesized Au nanomaterial was examined using UV spectroscopy, XRD, SEM and TEM. The AuNRs were found to be Agrobacterium tumefaciens (At), a causative agent of crown gall disease. At is reported to cause tumors in plants through a tumorigenic mechanism similar to that of humans. Inhibition of At indicates that the inhibitory compound being screened exhibits anticancer activity. Clitoria ternatea (Ct) is traditionally used to cure many diseases and is known to possess anticancer activity. Therefore, we have used a Ct flower extract in the preclinical study of its anticancer activity against At by fabricating a simple electrochemical sensor. We have employed electrochemical techniques such as CV and EIS for the characterization of the developed microbial biosensor. Moreover, the as-synthesized AuNRs behave as an ideal transducer and platform, thus improving the electrode surface area and providing good biocompatibility for the immobilization of At. In contrast to other immobilization techniques and biosensors that often require elaborate procedures, cross-linking agents and rigorous chemical reactions, At was directly adsorbed onto the electrode under optimum conditions without any mediators. The results show that the developed biosensor is useful in the pre-clinical analysis of anticancer properties. Indeed the study examines the use of electrochemistry, demonstrating the rapid response and high sensitivity of the proposed sensor in contrast to bioassay procedures. In conclusion, the experimental results indicate that the developed biosensor accentuates the excellent properties of the synthesized AuNRs, which promises to be a novel avenue in designing biosensors.
- 28 May 2016
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 20 (10) , 2619-2631
A new tavorite LiTiPO4F electrode material for aqueous rechargeable lithium ion battery
- 28 May 2016
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 20 (10) , 2619-2631
A new tavorite LiTiPO4F electrode material for aqueous rechargeable lithium ion battery