Vicente Queral
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vicente Queral has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Angel Ibarra
IFMIF-DONES España, Granada, Spain
8 shared publications - Angela Garcia
CIEMAT, Madrid, Spain
7 shared publications - Fernando Mota
CIEMAT, Avenida Complutense 40, Madrid 28040, Spain
7 shared publications D. Rapisarda
Laboratorio Nacional de Fusión, Euratom-Ciemat, 28040 Madrid, Spain
6 shared publicationsN. Casal
Laboratorio Nacional de Fusión, Euratom-Ciemat, 28040 Madrid, Spain
6 shared publications- Esther Rincon
CIEMAT, Lab Nacl Fus, Madrid 28040, Spain
5 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (10) , 105039
Design and integration studies of a DCLL breeding blanket for a stellarator reactor based on the CIEMAT-QI4X configuration
The integration of a breeding blanket (BB) in a stellarator reactor poses a major challenge due to the intricate geometry and the reduced free space between plasma and coils and between neighbouring coils, which also makes maintenance by remote handling techniques difficult. Conversely, in comparison with tokamaks, the BB can benefit significantly from the steady-state operation of stellarators. While previous studies have pointed to the feasibility of a dual coolant lithium lead (DCLL) BB in stellarators such as HELIAS-5B, each device introduces a different set of geometrical constraints and integration requirements that must be addressed through a dedicated design approach. This work presents a sequential study on several aspects that have clear impact on the functionality and efficiency of a DCLL BB integrated into a stellarator design based on the CIEMAT-QI4X plasma configuration. The proposal aims to achieve accurate alignment between the magnetic field and the liquid metal flow to avoid electric insulation of the liquid metal circuits as much as possible. Although it has yet to be confirmed through numerical analysis or experimental testing, the specific alignment strategy proves to be highly effective in reducing pressure drop in the liquid metal circuits. Besides, the neutronic results point to an excellent performance in terms of tritium breeding provided there is an optimal use of the available space between the plasma and the coils, although some arrangements must be done to satisfy also the contemplated shielding requirements. Furthermore, the internal design of the blanket segments and the optimisation of the cooling system allows achieving a valuable performance in terms of balance of plant, while meeting the structural integrity criteria that have been studied at a very preliminary stage.
- 1 October 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (10) , 105039
Open AccessDesign and integration studies of a DCLL breeding blanket for a stellarator reactor based on the CIEMAT-QI4X configuration
The integration of a breeding blanket (BB) in a stellarator reactor poses a major challenge due to the intricate geometry and the reduced free space between plasma and coils and between neighbouring coils, which also makes maintenance by remote handling techniques difficult. Conversely, in comparison with tokamaks, the BB can benefit significantly from the steady-state operation of stellarators. While previous studies have pointed to the feasibility of a dual coolant lithium lead (DCLL) BB in stellarators such as HELIAS-5B, each device introduces a different set of geometrical constraints and integration requirements that must be addressed through a dedicated design approach. This work presents a sequential study on several aspects that have clear impact on the functionality and efficiency of a DCLL BB integrated into a stellarator design based on the CIEMAT-QI4X plasma configuration. The proposal aims to achieve accurate alignment between the magnetic field and the liquid metal flow to avoid electric insulation of the liquid metal circuits as much as possible. Although it has yet to be confirmed through numerical analysis or experimental testing, the specific alignment strategy proves to be highly effective in reducing pressure drop in the liquid metal circuits. Besides, the neutronic results point to an excellent performance in terms of tritium breeding provided there is an optimal use of the available space between the plasma and the coils, although some arrangements must be done to satisfy also the contemplated shielding requirements. Furthermore, the internal design of the blanket segments and the optimisation of the cooling system allows achieving a valuable performance in terms of balance of plant, while meeting the structural integrity criteria that have been studied at a very preliminary stage.
- Open Access
- 1 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (10) , 106018
Overview of the European breeding blanket programme for HELIAS 5-B: dual coolant lead–lithium design, integration and tools
As part of EUROfusion’s mission to bring stellarators to technological maturity, the stellarator power plant studies (SPPS) work package prospective R&D (WPPRD) began in 2021 to develop a HELIAS-class power plant. Building on DEMO tokamak experience, European teams are designing a dual coolant lead–lithium (DCLL) breeding blanket (BB) for HELIAS. This concept uses liquid PbLi as breeder/coolant and decoupled helium cooling for the first wall (FW). Two key adaptations address HELIAS’s complex geometry: a detached FW using capillary porous system (CPS) technology, and a quasi-toroidal segmentation (QTS) with PbLi flow aligned to magnetic field lines. QTS reduces magnetohydrodynamic (MHD) pressure drop by up to two orders of magnitude, potentially eliminating electrical insulation needs. Remote handling (RH) is rethought for 3D stellarators, where traditional vertical-port extraction is impractical. Alternatives include enlarged fixed coils, movable coils for temporary large ports, and detachable vessel periods. The detached FW strategy shifts maintenance from large BB segments to smaller, easily replaceable FW panels, extending BB lifetime. CPS designs with Li in tungsten matrices were analysed thermally, hydraulically, and neutronically, showing potential to lower displacement-per-atom (dpa) damage while maintaining tritium breeding. Be-based moderators behind the FW CPS matrix improved tritium breeding ratio (TBR) while reducing back-structure damage. To accelerate design and analysis, HeliasGeom and SHANE tools were developed to rapidly generate realistic 3D parametric geometries for CAD, neutronic, and thermal-hydraulic coupling. Preliminary 3D studies addressed TBR optimization, shielding, MHD in non-uniform fields (via GridapMHD), and multi-scale thermal–mechanical assessments. These innovations collectively advance stellarator blanket technology, integration, and maintainability toward viable power plant concepts.
- 1 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (10) , 106018
Open AccessOverview of the European breeding blanket programme for HELIAS 5-B: dual coolant lead–lithium design, integration and tools
As part of EUROfusion’s mission to bring stellarators to technological maturity, the stellarator power plant studies (SPPS) work package prospective R&D (WPPRD) began in 2021 to develop a HELIAS-class power plant. Building on DEMO tokamak experience, European teams are designing a dual coolant lead–lithium (DCLL) breeding blanket (BB) for HELIAS. This concept uses liquid PbLi as breeder/coolant and decoupled helium cooling for the first wall (FW). Two key adaptations address HELIAS’s complex geometry: a detached FW using capillary porous system (CPS) technology, and a quasi-toroidal segmentation (QTS) with PbLi flow aligned to magnetic field lines. QTS reduces magnetohydrodynamic (MHD) pressure drop by up to two orders of magnitude, potentially eliminating electrical insulation needs. Remote handling (RH) is rethought for 3D stellarators, where traditional vertical-port extraction is impractical. Alternatives include enlarged fixed coils, movable coils for temporary large ports, and detachable vessel periods. The detached FW strategy shifts maintenance from large BB segments to smaller, easily replaceable FW panels, extending BB lifetime. CPS designs with Li in tungsten matrices were analysed thermally, hydraulically, and neutronically, showing potential to lower displacement-per-atom (dpa) damage while maintaining tritium breeding. Be-based moderators behind the FW CPS matrix improved tritium breeding ratio (TBR) while reducing back-structure damage. To accelerate design and analysis, HeliasGeom and SHANE tools were developed to rapidly generate realistic 3D parametric geometries for CAD, neutronic, and thermal-hydraulic coupling. Preliminary 3D studies addressed TBR optimization, shielding, MHD in non-uniform fields (via GridapMHD), and multi-scale thermal–mechanical assessments. These innovations collectively advance stellarator blanket technology, integration, and maintainability toward viable power plant concepts.
- Open Access
- 1 June 2026
- Published by Elsevier in Nuclear Materials and Energy
- Vol. 47
Progress on the design and integration of a decoupled Capillary Porous System based First Wall for HELIAS
- 1 June 2026
- Published by Elsevier in Nuclear Materials and Energy
- Vol. 47
Open AccessProgress on the design and integration of a decoupled Capillary Porous System based First Wall for HELIAS
- Open Access
On miniature ultra-high-field commercial stellarator reactors with breeding external to resistive coils
The working parameters and challenges of transposed (breeding external to resistive coils) ultra-high-field pulsed commercial stellarator reactors of small plasma volume are studied. They may allow production of commercial heat and electricity in a tiny and simple device, and contribute to the knowledge on burning plasmas. The concept is based on the previous works (V. Queral et al.) performed for the high-field experimental fusion reactor i-ASTER (J. Fus. Energy 37 2018) and the recent Distributed Divertor concept (non-resonant divertor on the full toroid; J. Fus. Energy 44 2025). The present proposal is driven by the limitation on the minimum size of typical commercial stellarator reactors due to the space needed for internal breeding and shielding of superconducting coils. This limit is about 400 m3, as deduced from e.g. ARIES-CS, ASTER-CP-(IEEE Trans. Plasma Sci. 52 2024) and Stellaris reactors. This fact, together with the accuracy and complexity of the systems, hinders quick iterations for the fast development of stellarator reactors, and also tokamaks. The concept is based on a pulsed high-beta large-aspect-ratio stellarator of small plasma volume (2-4 m3) and ultra-high magnetic field (~ 10-20 T), structured alike i-ASTER and UST_3 stellarators (external monolithic support and internal resistive coils), thermally-adiabatic aluminium conductors for neutron transparency, a low-recycling Distributed Divertor to extract the huge short-pulsed heat power from ionized particles (pulse ~ 5 τE), low pulsed duty cycle of 1-5%, and liquid or solid breeding material around and externally to the reactor core. Different cases and operating points are studied. The main elements, e.g. heat power on the Distributed Divertor, mechanical stresses in the coil support, radiation lifetime, and the prospect of net electricity production are evaluated. The involved challenges are assessed.
Open AccessOn miniature ultra-high-field commercial stellarator reactors with breeding external to resistive coils
The working parameters and challenges of transposed (breeding external to resistive coils) ultra-high-field pulsed commercial stellarator reactors of small plasma volume are studied. They may allow production of commercial heat and electricity in a tiny and simple device, and contribute to the knowledge on burning plasmas. The concept is based on the previous works (V. Queral et al.) performed for the high-field experimental fusion reactor i-ASTER (J. Fus. Energy 37 2018) and the recent Distributed Divertor concept (non-resonant divertor on the full toroid; J. Fus. Energy 44 2025). The present proposal is driven by the limitation on the minimum size of typical commercial stellarator reactors due to the space needed for internal breeding and shielding of superconducting coils. This limit is about 400 m3, as deduced from e.g. ARIES-CS, ASTER-CP-(IEEE Trans. Plasma Sci. 52 2024) and Stellaris reactors. This fact, together with the accuracy and complexity of the systems, hinders quick iterations for the fast development of stellarator reactors, and also tokamaks. The concept is based on a pulsed high-beta large-aspect-ratio stellarator of small plasma volume (2-4 m3) and ultra-high magnetic field (~ 10-20 T), structured alike i-ASTER and UST_3 stellarators (external monolithic support and internal resistive coils), thermally-adiabatic aluminium conductors for neutron transparency, a low-recycling Distributed Divertor to extract the huge short-pulsed heat power from ionized particles (pulse ~ 5 τE), low pulsed duty cycle of 1-5%, and liquid or solid breeding material around and externally to the reactor core. Different cases and operating points are studied. The main elements, e.g. heat power on the Distributed Divertor, mechanical stresses in the coil support, radiation lifetime, and the prospect of net electricity production are evaluated. The involved challenges are assessed.
- Open Access
- 19 February 2025
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 44 (1) , 1-15
Lithium Divertor Targets and Walls for the ASTER Liquid Stellarator Reactor, Distributed Divertor
Stellarators may have advantages for certain liquid metal options as Plasma Facing Components (PFC) for divertor targets and first walls due to the wide range of possible magnetic configurations, which additionally are free of disruptions and fast field variations. In a previous work (V. Queral et al., IEEE Trans. Plasma Sci. 52, 2024), a concept of stellarator reactor (ASTER-CP) based on swirling Li-molten salts and liquid lithium floating on the molten salt as PFC was presented. The divertor matters were not studied then and, thus, they are being studied and experimentally tested now. The ASTER-CP reactor concept, the initial liquid metal experiments and potential concepts for the ASTER-CP divertor and first wall are reported. Concerning the experiments, several small scale experiments of galinstan in a small rotating cylinder under magnetic field have been produced, including one experiment with high viscosity galinstan-mixture for increased thickness of layer. An experiment of floating lithium on the molten salt LiCl-PbCl2 gave fast volatilization/decomposition of the molten salt. Particularly for divertors, the traditional free-flow, Capillary Porous Systems and ‘divertorlets’ have been studied for application to ASTER-CP. Surface waves (hot spots), lack of enough surface fluid turbulence and excessive fluid speed are the main issues found in fast free-flow. The perhaps original concept of Distributed Divertor and Equi-power Surface is tentatively proposed and studied, taking advantage of stellarator fields and low recycling regime.
- 19 February 2025
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 44 (1) , 1-15
Open AccessLithium Divertor Targets and Walls for the ASTER Liquid Stellarator Reactor, Distributed Divertor
Stellarators may have advantages for certain liquid metal options as Plasma Facing Components (PFC) for divertor targets and first walls due to the wide range of possible magnetic configurations, which additionally are free of disruptions and fast field variations. In a previous work (V. Queral et al., IEEE Trans. Plasma Sci. 52, 2024), a concept of stellarator reactor (ASTER-CP) based on swirling Li-molten salts and liquid lithium floating on the molten salt as PFC was presented. The divertor matters were not studied then and, thus, they are being studied and experimentally tested now. The ASTER-CP reactor concept, the initial liquid metal experiments and potential concepts for the ASTER-CP divertor and first wall are reported. Concerning the experiments, several small scale experiments of galinstan in a small rotating cylinder under magnetic field have been produced, including one experiment with high viscosity galinstan-mixture for increased thickness of layer. An experiment of floating lithium on the molten salt LiCl-PbCl2 gave fast volatilization/decomposition of the molten salt. Particularly for divertors, the traditional free-flow, Capillary Porous Systems and ‘divertorlets’ have been studied for application to ASTER-CP. Surface waves (hot spots), lack of enough surface fluid turbulence and excessive fluid speed are the main issues found in fast free-flow. The perhaps original concept of Distributed Divertor and Equi-power Surface is tentatively proposed and studied, taking advantage of stellarator fields and low recycling regime.
- Open Access
Coil geometry with large openings for a HSR3-like stellarator reactor for fast replacement of in-vessel components
Advanced stellarators require convoluted modular coils to produce a plasma with satisfactory performance. Moreover, the number of coils is sometimes high to decrease the modular ripple created by the coils. For reactor stellarators, these requirements imply relatively small ports for in-vessel access and maintenance, i.e. in comparison with tokamaks. The blankets and divertor modules will have to be replaced periodically (about each 1-4 years depending on the design) due to neutron damage, and also erosion of divertor targets. Blanket modules are activated, thus, all the maintenance operations have to be produced remotely. In order to reduce the shutdown time and cost during component replacement, and to reduce the number, speed and other specifications of the remote maintenance equipment, the number of blanket modules in the reactor should be low and thus, the blanket modules should be large (in relation to the minor and major radius). Nevertheless, the size of the openings between coils limits the maximum size of the blanket and divertor modules, though several potential enhancements have been proposed in the past for stellarators, like straightening the outboard segments of the coils and the movement and/or expansion of certain coils to have wider access. The present work reports on a coil geometry for the 'Helias Stellarator Reactor' (HSR) of three periods (HSR3) with coils located far from the plasma at the outboard region of the straight-like sector. This feature creates natural wide openings at such regions of the coils, which may be utilized to allow access to large blanket and divertor modules.
Open AccessCoil geometry with large openings for a HSR3-like stellarator reactor for fast replacement of in-vessel components
Advanced stellarators require convoluted modular coils to produce a plasma with satisfactory performance. Moreover, the number of coils is sometimes high to decrease the modular ripple created by the coils. For reactor stellarators, these requirements imply relatively small ports for in-vessel access and maintenance, i.e. in comparison with tokamaks. The blankets and divertor modules will have to be replaced periodically (about each 1-4 years depending on the design) due to neutron damage, and also erosion of divertor targets. Blanket modules are activated, thus, all the maintenance operations have to be produced remotely. In order to reduce the shutdown time and cost during component replacement, and to reduce the number, speed and other specifications of the remote maintenance equipment, the number of blanket modules in the reactor should be low and thus, the blanket modules should be large (in relation to the minor and major radius). Nevertheless, the size of the openings between coils limits the maximum size of the blanket and divertor modules, though several potential enhancements have been proposed in the past for stellarators, like straightening the outboard segments of the coils and the movement and/or expansion of certain coils to have wider access. The present work reports on a coil geometry for the 'Helias Stellarator Reactor' (HSR) of three periods (HSR3) with coils located far from the plasma at the outboard region of the straight-like sector. This feature creates natural wide openings at such regions of the coils, which may be utilized to allow access to large blanket and divertor modules.
- Open Access
- 19 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3731-3737
On a High-Mirror Stellarator Reactor Exploratory Concept With Neutrons Concentrated on Centrifuge Liquids
In the framework of fusion energy research based on magnetic confinement, stellarators allow numerous degrees of freedom for the design of the magnetic trap and plasma shape. Taking advantage of these features, some plasma shapes might benefit several of the many integrated elements involved in commercial fusion reactors, like, e.g., decreasing the number, mass and complexity of replaced activated in-vessel components (IVC) (i.e., by using liquids), extraction of large power, tritium generation, and remote maintenance. Certainly, free-surface liquid materials were proposed for tokamaks and field-reversed configuration (FRC) to try to improve some of such elements, i.e., in advanced power extraction (APEX) studies. Some reactor-relevant quasi-isodynamic (QI) magnetic configurations exhibit a relatively straight sector of plasma and high magnetic mirror. The combination of those elements and possibilities in a single stellarator reactor concept might have some advantages, in spite of the uncertainties due to the current low technological readiness level (TRL). The proposed and studied reactor concept is based on a vacuum vessel having short curved sectors and longer wide cylindrical sectors, which encloses a high-mirror low-vertical-excursion magnetic configuration, and swirling liquids or rotating cylinders, which centrifuge molten Li salts located at the low field region. Thus, the molten salts (if possible covered by a thin layer of liquid lithium) would be located on the internal perimeter of the cylinder, to act as particle exhaust (except for helium), neutron power extractor, and tritium breeder. The high-mirror feature tries to concentrate the neutron power at the cylindrical sectors, which might avoid using breeding materials at the curved sectors. The different elements of the concept are exploratorily studied and defined, and the difficulties assessed.
- 19 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3731-3737
Open AccessOn a High-Mirror Stellarator Reactor Exploratory Concept With Neutrons Concentrated on Centrifuge Liquids
In the framework of fusion energy research based on magnetic confinement, stellarators allow numerous degrees of freedom for the design of the magnetic trap and plasma shape. Taking advantage of these features, some plasma shapes might benefit several of the many integrated elements involved in commercial fusion reactors, like, e.g., decreasing the number, mass and complexity of replaced activated in-vessel components (IVC) (i.e., by using liquids), extraction of large power, tritium generation, and remote maintenance. Certainly, free-surface liquid materials were proposed for tokamaks and field-reversed configuration (FRC) to try to improve some of such elements, i.e., in advanced power extraction (APEX) studies. Some reactor-relevant quasi-isodynamic (QI) magnetic configurations exhibit a relatively straight sector of plasma and high magnetic mirror. The combination of those elements and possibilities in a single stellarator reactor concept might have some advantages, in spite of the uncertainties due to the current low technological readiness level (TRL). The proposed and studied reactor concept is based on a vacuum vessel having short curved sectors and longer wide cylindrical sectors, which encloses a high-mirror low-vertical-excursion magnetic configuration, and swirling liquids or rotating cylinders, which centrifuge molten Li salts located at the low field region. Thus, the molten salts (if possible covered by a thin layer of liquid lithium) would be located on the internal perimeter of the cylinder, to act as particle exhaust (except for helium), neutron power extractor, and tritium breeder. The high-mirror feature tries to concentrate the neutron power at the cylindrical sectors, which might avoid using breeding materials at the curved sectors. The different elements of the concept are exploratorily studied and defined, and the difficulties assessed.
- Open Access
- 9 February 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 190
Embedded conductors in solidified molten metal for winding packs for high-field stellarators
- 9 February 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 190
Open AccessEmbedded conductors in solidified molten metal for winding packs for high-field stellarators
- 1 August 2021
- Published by Elsevier in Fusion Engineering and Design
- Vol. 169
Composites and additive manufacturing for high-field coil supports for stellarators
- 1 August 2021
- Published by Elsevier in Fusion Engineering and Design
- Vol. 169
Composites and additive manufacturing for high-field coil supports for stellarators
- 21 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 48 (6) , 1842-1848
High-Field Ignition-Capable Stellarator i-ASTER: Initial Structural Evaluation
i-ASTER is a preliminary conceptual design of a high-field pulsed experimental stellarator aimed essentially at achieving and understanding plasma ignition. The averaged magnetic field on the axis of i-ASTER.v1 is B ~ 10 T and the plasma volume is 30 m³. A toroidal monolithic support structure, which is located externally to the modular coils, is defined to accurately arrange the coils and withstand the magnetic Lorentz forces from the high magnetic fields. The magnetic field in the coils and the resulting Lorentz forces on the coils were calculated and utilized for the stress calculation in monolithic support of constant thickness. Subsequently, a monolithic support of variable thickness is proposed and studied. The thickness of the structure is variable and adjusted to the magnitude of the mechanical stress in each area of the toroidal structure so as to smooth the stresses while minimizing the quantity of material used. A fabrication method for the monolithic structure has been tested. For that, a scaled-down mock-up of one period of stellarator has been additively manufactured and strengthened with fiber-reinforced resin. Unsurmountable difficulties have not been found for this fabrication method.
- 21 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 48 (6) , 1842-1848
High-Field Ignition-Capable Stellarator i-ASTER: Initial Structural Evaluation
i-ASTER is a preliminary conceptual design of a high-field pulsed experimental stellarator aimed essentially at achieving and understanding plasma ignition. The averaged magnetic field on the axis of i-ASTER.v1 is B ~ 10 T and the plasma volume is 30 m³. A toroidal monolithic support structure, which is located externally to the modular coils, is defined to accurately arrange the coils and withstand the magnetic Lorentz forces from the high magnetic fields. The magnetic field in the coils and the resulting Lorentz forces on the coils were calculated and utilized for the stress calculation in monolithic support of constant thickness. Subsequently, a monolithic support of variable thickness is proposed and studied. The thickness of the structure is variable and adjusted to the magnitude of the mechanical stress in each area of the toroidal structure so as to smooth the stresses while minimizing the quantity of material used. A fabrication method for the monolithic structure has been tested. For that, a scaled-down mock-up of one period of stellarator has been additively manufactured and strengthened with fiber-reinforced resin. Unsurmountable difficulties have not been found for this fabrication method.