CNCecilia I. Nievas

Cecilia I. Nievas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cecilia I. Nievas has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Building-level exposure asset value modelling for Germany: an Ahrweiler case study

    by Aaron Buhrmann, Nivedita Sairam, Cecilia I. Nievas, James E. Daniell, Heidi Kreibich, Seth Bryant

    Verified, harmonised, open-access, object-level exposure data are essential for next-generation risk assessments, risk management, and impact-based forecasting. However, this object-level information is often proprietary, protected by regulation, poorly documented, and fragmented because data on building usage, structural type, or replacement costs are not readily available or not compiled in one dataset. To address this gap, we present an evaluation of exposure model workflows employing various disaggregation approaches and source data from cadastre-derived, crowd-sourced, national accounts, and fit-for-purpose datasets. Using information collected from one flood-affected region in Germany and a weighted scoring model, we evaluate the ability of each workflow to assign a building's economic sector and asset value against our hand-labelled benchmark dataset. Ultimately, we find an exposure model workflow disaggregating national accounts onto cadastre-derived building footprints slightly outperforms the other workflows owing mainly to its transparency and adaptability. However, we conclude that all but the land-use-derived workflow are defensible for object-level exposure modelling – when validated. While these findings are limited to one specific region, the workflows developed here provide the basis for broader evaluation across regions with different building stocks, economic structures, and data quality. Workflows like these enable the transparent, reproducible, and maintainable multi-sector object-level exposure modelling necessary for the next generation of risk analysis and impact forecasting.

  • Open Access

    Comment on egusphere-2025-5172

    by Aaron Buhrmann, Cecilia I. Nievas, Nivedita Sairam, James E. Daniell, Heidi Kreibich, Seth Bryant

    This study addresses the challenges of exposure modelling at the building or object-level in Germany, motivated by the need for harmonized, open-access data in next generation risk assessments. While aggregated exposure data suffice for many applications, detailed object-level data are increasingly essential for tasks such as local risk management and impact forecasting. However, this object-level information is often proprietary, protected by regulation, poorly documented, and fragmented because data on building usage, structural type, or replacement costs is often not readily available or not compiled in one dataset. To address this gap, we present an evaluation of potential exposure modelling frameworks utilizing various disaggregation approaches and source data from cadastre-derived, crowd-sourced, national accounts, and fit-for-purpose datasets. Using information collected from an area recently affected by a flood disaster and a weighted scoring model, we evaluate the ability of candidates to assign a building’s economic sector and asset value against our hand-labelled benchmark dataset. Ultimately, we find an exposure modelling framework disaggregating national-accounts onto cadastre-derived building footprints slightly out-performs other candidates owing mainly to its transparency and adaptability. However, we conclude that all but the land-use derived candidate are defensible exposure modelling frameworks — so long as some relevant validation is performed. The frameworks presented here enable the transparent, reproducible, and maintainable multi-sector object-level exposure modelling necessary for the next generation of risk analysis and impact forecasting.

  • Open Access

    Comment on egusphere-2025-5172

    by Aaron Buhrmann, Cecilia I. Nievas, Nivedita Sairam, James E. Daniell, Heidi Kreibich, Seth Bryant

    This study addresses the challenges of exposure modelling at the building or object-level in Germany, motivated by the need for harmonized, open-access data in next generation risk assessments. While aggregated exposure data suffice for many applications, detailed object-level data are increasingly essential for tasks such as local risk management and impact forecasting. However, this object-level information is often proprietary, protected by regulation, poorly documented, and fragmented because data on building usage, structural type, or replacement costs is often not readily available or not compiled in one dataset. To address this gap, we present an evaluation of potential exposure modelling frameworks utilizing various disaggregation approaches and source data from cadastre-derived, crowd-sourced, national accounts, and fit-for-purpose datasets. Using information collected from an area recently affected by a flood disaster and a weighted scoring model, we evaluate the ability of candidates to assign a building’s economic sector and asset value against our hand-labelled benchmark dataset. Ultimately, we find an exposure modelling framework disaggregating national-accounts onto cadastre-derived building footprints slightly out-performs other candidates owing mainly to its transparency and adaptability. However, we conclude that all but the land-use derived candidate are defensible exposure modelling frameworks — so long as some relevant validation is performed. The frameworks presented here enable the transparent, reproducible, and maintainable multi-sector object-level exposure modelling necessary for the next generation of risk analysis and impact forecasting.

  • Open Access

    Comment on egusphere-2025-5172

    by Aaron Buhrmann, Cecilia I. Nievas, Nivedita Sairam, James E. Daniell, Heidi Kreibich, Seth Bryant

    This study addresses the challenges of exposure modelling at the building or object-level in Germany, motivated by the need for harmonized, open-access data in next generation risk assessments. While aggregated exposure data suffice for many applications, detailed object-level data are increasingly essential for tasks such as local risk management and impact forecasting. However, this object-level information is often proprietary, protected by regulation, poorly documented, and fragmented because data on building usage, structural type, or replacement costs is often not readily available or not compiled in one dataset. To address this gap, we present an evaluation of potential exposure modelling frameworks utilizing various disaggregation approaches and source data from cadastre-derived, crowd-sourced, national accounts, and fit-for-purpose datasets. Using information collected from an area recently affected by a flood disaster and a weighted scoring model, we evaluate the ability of candidates to assign a building’s economic sector and asset value against our hand-labelled benchmark dataset. Ultimately, we find an exposure modelling framework disaggregating national-accounts onto cadastre-derived building footprints slightly out-performs other candidates owing mainly to its transparency and adaptability. However, we conclude that all but the land-use derived candidate are defensible exposure modelling frameworks — so long as some relevant validation is performed. The frameworks presented here enable the transparent, reproducible, and maintainable multi-sector object-level exposure modelling necessary for the next generation of risk analysis and impact forecasting.

  • Open Access

    Building-level exposed asset value modelling for Germany

    by Aaron Buhrmann, Cecilia I. Nievas, Nivedita Sairam, James E. Daniell, Heidi Kreibich, Seth Bryant

    This study addresses the challenges of exposure modelling at the building or object-level in Germany, motivated by the need for harmonized, open-access data in next generation risk assessments. While aggregated exposure data suffice for many applications, detailed object-level data are increasingly essential for tasks such as local risk management and impact forecasting. However, this object-level information is often proprietary, protected by regulation, poorly documented, and fragmented because data on building usage, structural type, or replacement costs is often not readily available or not compiled in one dataset. To address this gap, we present an evaluation of potential exposure modelling frameworks utilizing various disaggregation approaches and source data from cadastre-derived, crowd-sourced, national accounts, and fit-for-purpose datasets. Using information collected from an area recently affected by a flood disaster and a weighted scoring model, we evaluate the ability of candidates to assign a building’s economic sector and asset value against our hand-labelled benchmark dataset. Ultimately, we find an exposure modelling framework disaggregating national-accounts onto cadastre-derived building footprints slightly out-performs other candidates owing mainly to its transparency and adaptability. However, we conclude that all but the land-use derived candidate are defensible exposure modelling frameworks — so long as some relevant validation is performed. The frameworks presented here enable the transparent, reproducible, and maintainable multi-sector object-level exposure modelling necessary for the next generation of risk analysis and impact forecasting.

  • Open Access

    Supplementary material to "Building-level exposed asset value modelling for Germany"

    by Aaron Buhrmann, Cecilia I. Nievas, Nivedita Sairam, James E. Daniell, Heidi Kreibich, Seth Bryant

  • Open Access

    Uncertainties in flood damage assessment under projected future extreme rainfall conditions: a case study in Northeastern Sicily

    by Jeewanthi Sirisena, Armelle Remedio, Cecilia Nievas, Giuseppe Aronica, Laurens Bouwer

    Floods are among the world’s most frequently occurring natural hazards, affecting more people than other natural disasters while causing enormous damage to the socio-economy, developments, and environment. Because of the increasing frequency of heavy precipitation events and storm surges, large areas are at increasing risk of inundation. Many countries, thus, are forced to spend millions of dollars every year to recover from the floods’ aftermath as well as on disaster prevention, mitigation, and adaptation. Over the last decades, these kinds of extreme events have presented a significant challenge in Europe, particularly in the Mediterranean region which experienced intense rainfall and flash floods. Many coastal urban areas in France, Italy and Spain have undergone severe damages and losses due to extreme rainfall events causing flash floods. This situation may further exacerbate due to the climate-change-driven impacts and intense human activities in the region.As key components of risk assessment, modelling of hazard, vulnerability, and exposure are required to categorize the potential future damages and events. However, uncertainties in damage and risk estimation can be introduced from different sources such as model input data and model structure and parameters. Especially short-duration extreme events are often under-researched. Here, we focus on addressing uncertainties in the chain of multi-hazard risk assessment, particularly floods in the Mili and Santo Stefano di Briga Basins in the Northeastern Sicily. This study is a part of the “risk workflow for CAScading and COmpounding hazards in COastal urban areas” (CASCO) project, which aims to develop a framework to evaluate the damage as well as economic and human losses due to a series of several important natural hazards acting in a quick temporal succession: floods, earthquakes, tsunamis, heat waves, and landslides.In this study, we use daily and sub-daily in-situ observations (2001 - 2022) and projected hourly rainfall from 8 ensemble runs of the EURO-CORDEX regional climate change projections under the RCP 8.5 scenario (2031-2060) to establish the intensity-depth-frequency (IDF) curves and drive a hydrological model for short-duration rainstorm events between 6 and 12 hours. The resulting flood depths, area, and velocities were obtained from 1D/2D hydrodynamic modelling. To model subsequent flood damages, we investigate different fragility curves in the literature relevant for Italian building classes. The exposure data are obtained from the newly developed European High-Resolution Exposure (EHRE) model (Nievas et al. 2023).Our results show that in general, future rainfall extremes are projected to be more frequent and severe in the study area, leading to increasing flood hazard levels. As a consequence, damages in several areas are projected to increase as well. Overall damage estimation depends on the inputs at different stages of the modelling chain, which cause uncertainties and variability in the model estimations and resulting risk evaluations. Keywords: Extreme rainfall, Flood hazard and damage, Sicily, UncertaintyReference: Nievas, C. I., Kriegerowski, M., Delattre, F., Garcia Ospina, N., Prehn, K., Cotton, F. (2023): The European High-Resolution Exposure (EHRE) Model, (Scientific Technical Report STR ; 23/05), Potsdam : GFZ German Research Centre for Geosciences, 64 p. https://doi.org/10.48440/gfz.b103-23055


  • Open Access

    Real-Time Loss Tools: Open-Source Software for Time- and State-Dependent Seismic Damage and Loss Calculations – Features and Application to the 2023 Türkiye-Syria Sequence

    by Cecilia Nievas, Helen Crowley, Graeme Weatherill, Fabrice Cotton

    During a seismic sequence, the action of each earthquake has the potential to damage and weaken exposed structures, causing their fragility to change, and increasing their likelihood of being further damaged by subsequent earthquakes. At the same time, building occupants that need to be hospitalised after an earthquake will not be present in the buildings whose damage led to their hospitalisation during any subsequent events, for as long as they remain in hospital. These changes in the fragility of buildings and the location of building occupants during a seismic sequence have an impact on the estimation of damage and losses throughout the sequence, but are often not accounted for in rapid loss assessments or when estimating future damage associated with time-dependent short-term seismicity forecasts. While knowledge and modelling capabilities for individual components have advanced in this direction in recent years, there has been, up to this point, no publicly available open-source software able to account for damage accumulation and the displacement of building occupants during seismic sequences. Building upon OpenQuake, we have developed the Real-Time Loss Tools software to address this limitation and present its main features herein, together with a case-study application focused on the 2023 Türkiye-Syria earthquakes.


  • Monitoring-Driven Post-earthquake Building Damage Tagging

    by Yves Reuland, Alireza Khodaverdian, Helen Crowley, Cecilia Nievas, Panagiotis Martakis, Eleni Chatzi


  • Open Access

    A census-derived building aggregated exposure model (AEM) for Japan

    by Simantini Shinde, Cecilia Nievas, Kevin Fleming, Laurens Jozef Nicolaas Oostwegel, Tara Evaz Zadeh, Danijel Schorlemmer

    Building exposure, that is, characterization of buildings, number of people occupying it and its replacement cost, for a given region or area, is a primary component when determining building risk due to a hazard or group of hazards. Building characterization includes parameters like construction material, number of stories, lateral load resisting components, etc. There exists a large spatial variation in building exposure, as seen with the development of past global and regional exposure databases (Jaiswal et al., 2008, Yepes-Estrada et al., 2017). Such efforts have also resulted in uniformity and collection of building-type definitions globally.We have developed an exposure model for Japan at the municipality level. This model is entirely derived from open building data (e.g., census) and resulting in an open inventory of uniformly defined building parameters available for risk assessments. The Japanese land and housing database (https://www.e-stat.go.jp/en) provides information about building types and their number, dwelling type, their number and size, tenure type, construction material type, year of construction, number of stories, persons per dwelling and size of dwelling (area in square meters). After interpreting this information, different combinations of building type, construction material, year of construction, and number of stories were mapped to building classes based on the taxonomy of the Global Earthquake Model (GEM). Furthermore, building parameters required for loss assessments (e.g., replacement cost per unit area of a dwelling, number of people per dwelling) were assigned to the identified building class at the municipality level and stored in a database open for public access.The quality of the model is greatly affected by the availability of building parameters and their survey quality in the census data. The commercial and industrial data from the census lacks information on number of stories and have to be derived from other sources for our model. Additionally, the district information defining the model has layers of complexity due to Japan being divided in multiple administrative units at the same administrative level. Such constraints and complexities, limit the flexibility and versatility of the model to be up-scaled or down-scaled from higher to lower resolution and vice versa, also to due to the large scale uncertainty of the survey methods of the data.Despite the limitations, the model gives a clear snapshot of the distribution of regional building classes and their possible count. It also, thus represents an open catalogue of rules for mapping Japanese building attributes to a GEM taxonomy-based building class and, in doing so, creates an opportunity for the scientific and non-scientific community to collaborate on the assessment. We welcome, corrections, and expansion of individual aspects of the aggregated exposure model and like tohopefully encourages the development of such open aggregated exposure models for other countries. References:Jaiswal K, Wald D, Porter K (2010) A global building inventory for earthquake loss estimation and riskmanagement. Earthq Spectra 26:731–748. Yepes-Estrada C, Silva V, Valcárcel J, Acevedo AB, Tarque N, Hube MA, Coronel G, María HS 2017 Modeling the Residential building inventory in South America for seismic risk assessment. Earthquake Spectra 33:299–322. https ://doi.org/10.1193/10191 5EQS1 55DP