Allan D. Mackie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Allan D. Mackie has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Josep Bonet Avalos
Departament d’Enginyeria Química, ETSEQ
22 shared publications - Philippe Ungerer
Materials Design s.a.r.l.
10 shared publications - Martin Lísal
Institute of Chemical Process Fundamentals, Czech Academy of Sciences Rozvojová 135/1
8 shared publications - Carlos Nieto-Draghi
IFP Energies nouvelles
7 shared publications Véronique Lachet
IFP Energies Nouvelles , 1-4 Avenue de Bois-Préau, 92852 Rueil-Malmaison, France
7 shared publications- Fabián Alonso García Daza
Department d'Enginyeria Química, ETSEQ, Universitat Rovira i Virgili, Avinguda dels Països Catalans 26, 43007 Tarragona, Spain
6 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 22 (13) , 6341-6366
Statistical Mechanics of Density- and Temperature-Dependent Potentials: Application to Condensed Phases within GenDPDE
Coarse-grain Lagrangian methods, such as Dissipative Particle Dynamics (P. J. Hoogerbrugge et al., EPL, 1992, 19, 155), are suitable to describe mesoscopic fluid systems with the inclusion of thermal fluctuations. However, the realistic simulation of liquids using these methods represents a longstanding problem. In this work, we develop a local thermodynamic (LTh) model for the description of condensed phases within the framework of the Generalized Dissipative Particle Dynamics with Energy Conservation (GenDPDE) method (J. Bonet Avalos et al., Phys. Chem. Chem. Phys. 2019, 21, 24891). Such a model is appropriate for the analysis of liquids, due to the explicit account of the thermal expansion coefficient and isothermal compressibility at the mesoscale. We demonstrate the accuracy of the LTh model by inspecting the thermodynamic properties of argon at both liquid and supercritical conditions, through equilibrium simulations carried out around two characteristic reference states (T = 125.7 K, P = 85.31 MPa, ϱ = 1419.7 kg/m3 for liquid Ar, and T = 418.8 K, P = 85.31 MPa, ϱ = 695.99 kg/m3 for supercritical Ar). Remarkably, we show that the model is also valid in a range of thermodynamic conditions near the reference states, allowing for a correct description of the physics of systems with spatial density and temperature variations. We furthermore derive analytical expressions for the macroscopic pressure and energy equations of state in terms of the model parameters, discussing their validity and limitations. We show that, even at the mean-field level, a correct account of the local particle arrangements is necessary to obtain accurate predictions of the macroscopic thermodynamic quantities from mesoscopic properties. Thus, we also investigate the applicability of the Hypernetted Chain approximation as a tool to predict the radial distribution function of the GenDPDE system, examining the strengths and deficiencies of this approach. With the proposed LTh model, GenDPDE provides a reliable and flexible tool for the analysis of condensed phases through coarse-grain techniques.
- 2 July 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 22 (13) , 6341-6366
Open AccessStatistical Mechanics of Density- and Temperature-Dependent Potentials: Application to Condensed Phases within GenDPDE
Coarse-grain Lagrangian methods, such as Dissipative Particle Dynamics (P. J. Hoogerbrugge et al., EPL, 1992, 19, 155), are suitable to describe mesoscopic fluid systems with the inclusion of thermal fluctuations. However, the realistic simulation of liquids using these methods represents a longstanding problem. In this work, we develop a local thermodynamic (LTh) model for the description of condensed phases within the framework of the Generalized Dissipative Particle Dynamics with Energy Conservation (GenDPDE) method (J. Bonet Avalos et al., Phys. Chem. Chem. Phys. 2019, 21, 24891). Such a model is appropriate for the analysis of liquids, due to the explicit account of the thermal expansion coefficient and isothermal compressibility at the mesoscale. We demonstrate the accuracy of the LTh model by inspecting the thermodynamic properties of argon at both liquid and supercritical conditions, through equilibrium simulations carried out around two characteristic reference states (T = 125.7 K, P = 85.31 MPa, ϱ = 1419.7 kg/m3 for liquid Ar, and T = 418.8 K, P = 85.31 MPa, ϱ = 695.99 kg/m3 for supercritical Ar). Remarkably, we show that the model is also valid in a range of thermodynamic conditions near the reference states, allowing for a correct description of the physics of systems with spatial density and temperature variations. We furthermore derive analytical expressions for the macroscopic pressure and energy equations of state in terms of the model parameters, discussing their validity and limitations. We show that, even at the mean-field level, a correct account of the local particle arrangements is necessary to obtain accurate predictions of the macroscopic thermodynamic quantities from mesoscopic properties. Thus, we also investigate the applicability of the Hypernetted Chain approximation as a tool to predict the radial distribution function of the GenDPDE system, examining the strengths and deficiencies of this approach. With the proposed LTh model, GenDPDE provides a reliable and flexible tool for the analysis of condensed phases through coarse-grain techniques.
- Open Access
- 30 May 2024
- Published by Walter de Gruyter GmbH in Journal of Non-Equilibrium Thermodynamics
- Vol. 49 (3) , 347-375
Generalized energy-conserving dissipative particle dynamics with mass transfer: coupling between energy and mass exchange
The complete description of energy and material transport within the Generalized energy-conserving dissipative particle dynamics with mass transfer (GenDPDE-M) methodology is presented. In particular, the dynamic coupling between mass and energy is incorporated into the GenDPDE-M, which was previously introduced with dynamically decoupled fluxes (J. Bonet Avalos et al., J. Chem. Theory Comput. , 18 (12): 7639–7652, 2022). From a theoretical perspective, we have derived the appropriate Fluctuation-Dissipation theorems along with Onsager’s reciprocal relations, suitable for mesoscale models featuring this coupling. Equilibrium and non-equilibrium simulations are performed to demonstrate the internal thermodynamic consistency of the method, as well as the ability to capture the Ludwig–Soret effect, and tune its strength through the mesoscopic parameters. In view of the completeness of the presented approach, GenDPDE-M is the most general Lagrangian method to deal with complex fluids and systems at the mesoscale, where thermal agitation is relevant.
- 30 May 2024
- Published by Walter de Gruyter GmbH in Journal of Non-Equilibrium Thermodynamics
- Vol. 49 (3) , 347-375
Open AccessGeneralized energy-conserving dissipative particle dynamics with mass transfer: coupling between energy and mass exchange
The complete description of energy and material transport within the Generalized energy-conserving dissipative particle dynamics with mass transfer (GenDPDE-M) methodology is presented. In particular, the dynamic coupling between mass and energy is incorporated into the GenDPDE-M, which was previously introduced with dynamically decoupled fluxes (J. Bonet Avalos et al., J. Chem. Theory Comput. , 18 (12): 7639–7652, 2022). From a theoretical perspective, we have derived the appropriate Fluctuation-Dissipation theorems along with Onsager’s reciprocal relations, suitable for mesoscale models featuring this coupling. Equilibrium and non-equilibrium simulations are performed to demonstrate the internal thermodynamic consistency of the method, as well as the ability to capture the Ludwig–Soret effect, and tune its strength through the mesoscopic parameters. In view of the completeness of the presented approach, GenDPDE-M is the most general Lagrangian method to deal with complex fluids and systems at the mesoscale, where thermal agitation is relevant.
- Open Access
- 1 December 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (2) , 1328-1339
Green–Kubo expressions for transport coefficients from dissipative particle dynamics simulations revisited
This article addresses the debate about the correct application of Green–Kubo expressions for transport coefficients from dissipative particle dynamics simulations. We demonstrate that the Green–Kubo expressions are valid provided that (i) the dynamic model conserves the physical property, whose transport is studied, and (ii) the fluctuations satisfy detailed balance. As a result, the traditional expressions used in molecular dynamics can also be applied to dissipative particle dynamics simulations. However, taking the calculation of the shear viscosity as a paradigmatic example, a random contribution, whose strength scales as 1/δt1/2, with δt the time-step, can cause difficulties if the stress tensor is not separated into the different contributions. We compare our expression to that of Ernst and Brito (M. H. Ernst and R. Brito, Europhys. Lett., 2006, 73, 183–189), which arises from a diametrically different perspective. We demonstrate that the two expressions are completely equivalent and find exactly the same result both analytically and numerically. We show that the differences are not due to the lack of time-reversibility but instead from a pre-averaging of the random contributions. Despite the overall validity of Green–Kubo expressions, we find that the Einstein–Helfand relations (D. C. Malaspina et al. Phys. Chem. Chem. Phys., 2023, 25, 12025–12040) do not suffer from the need to decompose the stress tensor and can readily be used with a high degree of accuracy. Consequently, Einstein–Helfand relations should be seen as the preferred method to calculate transport coefficients from dissipative particle dynamics simulations.
- 1 December 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (2) , 1328-1339
Open AccessGreen–Kubo expressions for transport coefficients from dissipative particle dynamics simulations revisited
This article addresses the debate about the correct application of Green–Kubo expressions for transport coefficients from dissipative particle dynamics simulations. We demonstrate that the Green–Kubo expressions are valid provided that (i) the dynamic model conserves the physical property, whose transport is studied, and (ii) the fluctuations satisfy detailed balance. As a result, the traditional expressions used in molecular dynamics can also be applied to dissipative particle dynamics simulations. However, taking the calculation of the shear viscosity as a paradigmatic example, a random contribution, whose strength scales as 1/δt1/2, with δt the time-step, can cause difficulties if the stress tensor is not separated into the different contributions. We compare our expression to that of Ernst and Brito (M. H. Ernst and R. Brito, Europhys. Lett., 2006, 73, 183–189), which arises from a diametrically different perspective. We demonstrate that the two expressions are completely equivalent and find exactly the same result both analytically and numerically. We show that the differences are not due to the lack of time-reversibility but instead from a pre-averaging of the random contributions. Despite the overall validity of Green–Kubo expressions, we find that the Einstein–Helfand relations (D. C. Malaspina et al. Phys. Chem. Chem. Phys., 2023, 25, 12025–12040) do not suffer from the need to decompose the stress tensor and can readily be used with a high degree of accuracy. Consequently, Einstein–Helfand relations should be seen as the preferred method to calculate transport coefficients from dissipative particle dynamics simulations.
- Open Access
- 6 April 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (17) , 12025-12040
Transport coefficients from Einstein–Helfand relations using standard and energy-conserving dissipative particle dynamics methods
In this article we demonstrate that contrary to general belief, the standard Einstein–Helfand (EH) formulas are valid for the evaluation of transport coefficients of systems containing dissipative and random forces provided that for these mesoscopic systems: (i) the corresponding conservation laws are satisfied, and (ii) the transition probabilities satisfy detailed balance. Dissipative particle dynamics (DPD) and energy-conserving DPD methods (DPDE), for instance, are archetypical of such mesoscopic approaches satisfying these properties. To verify this statement, we have derived a mesoscopic heat flux form for the DPDE method, suitable for the calculation of the thermal conductivity from an EH expression. We have compared EH measurements against non-equilibrium simulation values for different scenarios, including many-body potentials, and have found excellent agreement in all cases. The expressions are valid notably for systems with density- and temperature-dependent potentials, such as the recently developed generalised DPDE method (GenDPDE) [Avalos et al., Phys. Chem. Chem. Phys., 2019, 21, 24891]. We thus demonstrate that traditional EH formulas in equilibrium simulations can be widely used to obtain transport coefficients, provided that the appropriate expression for the associated flux is used.
- 6 April 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (17) , 12025-12040
Open AccessTransport coefficients from Einstein–Helfand relations using standard and energy-conserving dissipative particle dynamics methods
In this article we demonstrate that contrary to general belief, the standard Einstein–Helfand (EH) formulas are valid for the evaluation of transport coefficients of systems containing dissipative and random forces provided that for these mesoscopic systems: (i) the corresponding conservation laws are satisfied, and (ii) the transition probabilities satisfy detailed balance. Dissipative particle dynamics (DPD) and energy-conserving DPD methods (DPDE), for instance, are archetypical of such mesoscopic approaches satisfying these properties. To verify this statement, we have derived a mesoscopic heat flux form for the DPDE method, suitable for the calculation of the thermal conductivity from an EH expression. We have compared EH measurements against non-equilibrium simulation values for different scenarios, including many-body potentials, and have found excellent agreement in all cases. The expressions are valid notably for systems with density- and temperature-dependent potentials, such as the recently developed generalised DPDE method (GenDPDE) [Avalos et al., Phys. Chem. Chem. Phys., 2019, 21, 24891]. We thus demonstrate that traditional EH formulas in equilibrium simulations can be widely used to obtain transport coefficients, provided that the appropriate expression for the associated flux is used.
- 18 November 2022
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 18 (12) , 7653-7670
Generalized Energy-Conserving Dissipative Particle Dynamics with Mass Transfer. Part 2: Applications and Demonstrations
We present the second part of a two-part paper series intended to address a gap in computational capability for coarse-grain particle modeling and simulation, namely, the simulation of phenomena in which diffusion via mass transfer is a contributing mechanism. In part 1, we presented a formulation of a dissipative particle dynamics method to simulate interparticle mass transfer, termed generalized energy-conserving dissipative particle dynamics with mass transfer (GenDPDE-M). In the GenDPDE-M method, the mass of each mesoparticle remains constant following the interparticle mass exchange. In part 2 of this series, further verification and demonstrations of the GenDPDE-M method are presented for mesoparticles with embedded binary mixtures using the ideal gas (IG) and van der Waals (vdW) equation-of-state (EoS). The targeted readership of part 2 is toward practitioners, where applications and practical considerations for implementing the GenDPDE-M method are presented and discussed, including a numerical discretisztion algorithm for the equations-of-motion. The GenDPDE-M method is verified by reproducing the particle distributions predicted by Monte Carlo simulations for the IG and vdW fluids, along with several demonstrations under both equilibrium and non-equilibrium conditions. GenDPDE-M can be generally applied to multi-component mixtures and to other fundamental EoS, such as the Lennard-Jones or Exponential-6 models, as well as to more advanced EoS models such as Statistical Associating Fluid Theory.
- 18 November 2022
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 18 (12) , 7653-7670
Generalized Energy-Conserving Dissipative Particle Dynamics with Mass Transfer. Part 2: Applications and Demonstrations
We present the second part of a two-part paper series intended to address a gap in computational capability for coarse-grain particle modeling and simulation, namely, the simulation of phenomena in which diffusion via mass transfer is a contributing mechanism. In part 1, we presented a formulation of a dissipative particle dynamics method to simulate interparticle mass transfer, termed generalized energy-conserving dissipative particle dynamics with mass transfer (GenDPDE-M). In the GenDPDE-M method, the mass of each mesoparticle remains constant following the interparticle mass exchange. In part 2 of this series, further verification and demonstrations of the GenDPDE-M method are presented for mesoparticles with embedded binary mixtures using the ideal gas (IG) and van der Waals (vdW) equation-of-state (EoS). The targeted readership of part 2 is toward practitioners, where applications and practical considerations for implementing the GenDPDE-M method are presented and discussed, including a numerical discretisztion algorithm for the equations-of-motion. The GenDPDE-M method is verified by reproducing the particle distributions predicted by Monte Carlo simulations for the IG and vdW fluids, along with several demonstrations under both equilibrium and non-equilibrium conditions. GenDPDE-M can be generally applied to multi-component mixtures and to other fundamental EoS, such as the Lennard-Jones or Exponential-6 models, as well as to more advanced EoS models such as Statistical Associating Fluid Theory.
- 28 October 2022
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 18 (12) , 7639-7652
Generalized Energy-Conserving Dissipative Particle Dynamics with Mass Transfer. Part 1: Theoretical Foundation and Algorithm
An extension of the generalized energy-conserving dissipative particle dynamics method (GenDPDE) that allows mass transfer between mesoparticles via a diffusion process is presented. By considering the concept of the mesoparticles as property carriers, the complexity and flexibility of the GenDPDE framework were enhanced to allow for interparticle mass transfer under isoenergetic conditions, notated here as GenDPDE-M. In the formulation, diffusion is described via the theory of mesoscale irreversible processes based on linear relationships between the fluxes and thermodynamic forces, where their fluctuations are described by Langevin-like equations. The mass exchange between mesoparticles is such that the mass of the mesoparticle remains unchanged after the transfer process and requires additional considerations regarding the coupling with other system properties such as the particle internal energy. The proof-of-concept work presented in this article is the first part of a two-part article series. In Part 1, the development of the GenDPDE-M theoretical framework and the derivation of the algorithm are presented in detail. Part 2 of this article series is targeted for practitioners, where applications, demonstrations, and practical considerations for implementing the GenDPDE-M method are presented and discussed.
- 28 October 2022
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 18 (12) , 7639-7652
Generalized Energy-Conserving Dissipative Particle Dynamics with Mass Transfer. Part 1: Theoretical Foundation and Algorithm
An extension of the generalized energy-conserving dissipative particle dynamics method (GenDPDE) that allows mass transfer between mesoparticles via a diffusion process is presented. By considering the concept of the mesoparticles as property carriers, the complexity and flexibility of the GenDPDE framework were enhanced to allow for interparticle mass transfer under isoenergetic conditions, notated here as GenDPDE-M. In the formulation, diffusion is described via the theory of mesoscale irreversible processes based on linear relationships between the fluxes and thermodynamic forces, where their fluctuations are described by Langevin-like equations. The mass exchange between mesoparticles is such that the mass of the mesoparticle remains unchanged after the transfer process and requires additional considerations regarding the coupling with other system properties such as the particle internal energy. The proof-of-concept work presented in this article is the first part of a two-part article series. In Part 1, the development of the GenDPDE-M theoretical framework and the derivation of the algorithm are presented in detail. Part 2 of this article series is targeted for practitioners, where applications, demonstrations, and practical considerations for implementing the GenDPDE-M method are presented and discussed.
- 16 March 2022
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 18 (4) , 2503-2512
Generalized Energy-Conserving Dissipative Particle Dynamics with Reactions
We present an extension of the generalized energy-conserving dissipative particle dynamics method (J. Bonet Avalos, et al., Phys Chem Chem Phys,2019,21, 24891–24911) to include chemical reactivity, denoted GenDPDE-RX. GenDPDE-RX provides a means of simulating chemical reactivity at the micro- and mesoscales, while exploiting the attributes of density- and temperature-dependent many-body force fields, which include improved transferability and scalability compared to two-body pairwise models. The GenDPDE-RX formulation considers intra-particle reactivity via a coarse-grain reactor construct. Extent-of-reaction variables assigned to each coarse-grain particle monitor the temporal evolution of the prescribed reaction mechanisms and kinetics assumed to occur within the particle. Descriptions of the algorithm, equations of motion, and numerical discretization are presented, followed by verification of the GenDPDE-RX method through comparison with reaction kinetics theoretical model predictions. Demonstrations of the GenDPDE-RX method are performed using constant-volume adiabatic heating simulations of three different reaction models, including both reversible and irreversible reactions, as well as multistep reaction mechanisms. The selection of the demonstrations is intended to illustrate the flexibility and generality of the method but is inspired by real material systems that span from fluids to solids. Many-body force fields using analytical forms of the ideal gas, Lennard-Jones, and exponential-6 equations of state are used for demonstration, although application to other forms of equation of states is possible. Finally, the flexibility of the GenDPDE-RX framework is addressed with a brief discussion of other possible adaptations and extensions of the method.
- 16 March 2022
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 18 (4) , 2503-2512
Generalized Energy-Conserving Dissipative Particle Dynamics with Reactions
We present an extension of the generalized energy-conserving dissipative particle dynamics method (J. Bonet Avalos, et al., Phys Chem Chem Phys,2019,21, 24891–24911) to include chemical reactivity, denoted GenDPDE-RX. GenDPDE-RX provides a means of simulating chemical reactivity at the micro- and mesoscales, while exploiting the attributes of density- and temperature-dependent many-body force fields, which include improved transferability and scalability compared to two-body pairwise models. The GenDPDE-RX formulation considers intra-particle reactivity via a coarse-grain reactor construct. Extent-of-reaction variables assigned to each coarse-grain particle monitor the temporal evolution of the prescribed reaction mechanisms and kinetics assumed to occur within the particle. Descriptions of the algorithm, equations of motion, and numerical discretization are presented, followed by verification of the GenDPDE-RX method through comparison with reaction kinetics theoretical model predictions. Demonstrations of the GenDPDE-RX method are performed using constant-volume adiabatic heating simulations of three different reaction models, including both reversible and irreversible reactions, as well as multistep reaction mechanisms. The selection of the demonstrations is intended to illustrate the flexibility and generality of the method but is inspired by real material systems that span from fluids to solids. Many-body force fields using analytical forms of the ideal gas, Lennard-Jones, and exponential-6 equations of state are used for demonstration, although application to other forms of equation of states is possible. Finally, the flexibility of the GenDPDE-RX framework is addressed with a brief discussion of other possible adaptations and extensions of the method.
- Open Access
- 24 January 2022
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 55 (3) , 914-927
Universal Scaling for the Exit Dynamics of Block Copolymers from Micelles at Short and Long Time Scales
The correlation function for the exit of poloxamer copolymers from equilibrated micelles is found to show up to four regimes depending on the chain flexibility: an initial fast reorganization, a logarithmic intermediate regime, followed by an exponential intermediate regime, and a final exponential decay. The logarithmic intermediate regime has been observed experimentally and attributed to the polydispersity of the polymer samples. However, we present dynamic single-chain mean-field theory simulations with chains of variable flexibility which show the same logarithmic relaxation but with strictly monodisperse systems. In agreement with our previous studies, we propose that this logarithmic response arises from a degeneracy of energy states of the hydrophobic block in the micelle core. For this to occur, a sufficiently large number of degenerate conformational states are required, which depend on the polymer flexibility and therefore should not be present for rigid polymers. Experimental results for monodisperse polymeric samples claiming the absence of such a logarithmic response may also lack a sufficient number of hydrophobic blocks for the required number of configurational states for this type of response to be seen. The insight gained from analyzing the simulation results allows us to propose a modified Eyring equation capable of reproducing the observed dynamic behavior. On scaling experimental results from different sources and systems according to this equation, we find a unique master curve showing a universal nature of the intermediate regimes: the logarithmic regime together with the secondary exponential decay. The terminal exponential regime at long times proposed by the standard Halperin and Alexander model is beyond the range of the data analyzed in this article. The universality observed suggests an entropic origin of the short-time dynamic response of this class of systems rather than the polydispersity.
- 24 January 2022
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 55 (3) , 914-927
Open AccessUniversal Scaling for the Exit Dynamics of Block Copolymers from Micelles at Short and Long Time Scales
The correlation function for the exit of poloxamer copolymers from equilibrated micelles is found to show up to four regimes depending on the chain flexibility: an initial fast reorganization, a logarithmic intermediate regime, followed by an exponential intermediate regime, and a final exponential decay. The logarithmic intermediate regime has been observed experimentally and attributed to the polydispersity of the polymer samples. However, we present dynamic single-chain mean-field theory simulations with chains of variable flexibility which show the same logarithmic relaxation but with strictly monodisperse systems. In agreement with our previous studies, we propose that this logarithmic response arises from a degeneracy of energy states of the hydrophobic block in the micelle core. For this to occur, a sufficiently large number of degenerate conformational states are required, which depend on the polymer flexibility and therefore should not be present for rigid polymers. Experimental results for monodisperse polymeric samples claiming the absence of such a logarithmic response may also lack a sufficient number of hydrophobic blocks for the required number of configurational states for this type of response to be seen. The insight gained from analyzing the simulation results allows us to propose a modified Eyring equation capable of reproducing the observed dynamic behavior. On scaling experimental results from different sources and systems according to this equation, we find a unique master curve showing a universal nature of the intermediate regimes: the logarithmic regime together with the secondary exponential decay. The terminal exponential regime at long times proposed by the standard Halperin and Alexander model is beyond the range of the data analyzed in this article. The universality observed suggests an entropic origin of the short-time dynamic response of this class of systems rather than the polydispersity.
- 16 June 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (6) , 062128
Generalized energy-conserving dissipative particle dynamics revisited: Insight from the thermodynamics of the mesoparticle leading to an alternative heat flow model
Recently we introduced the generalized energy-conserving dissipative particle dynamics method (GenDPDE) [J. Bonet Avalos, M. Lísal, J. P. Larentzos, A. D. Mackie, and J. K. Brennan, Phys. Chem. Chem. Phys. 21, 24891 (2019)], which has been formulated for an emerging class of density- and temperature-dependent coarse-grain models. In the original work, GenDPDE was formulated to ensure a fundamental link is maintained with the underlying physical system at the higher resolution scale. In this paper, we revisit the formulation of the GenDPDE method, and rederive the particle thermodynamics to ensure consistency at the opposing scale extreme, i.e., between the local thermodynamics in the mesoscopic systems and the corresponding macroscopic properties. We demonstrate this consistency by introducing unambiguous, physically meaningful definitions of the heat and work, which lead to the formulation of an alternative heat flow model that is analogous to Fourier's law of heat conduction. We present further analysis of the internal, unresolved degrees-of-freedom of the mesoparticles by considering the thermodynamics of an individual mesoparticle within the GenDPDE framework. Several key outcomes of the analysis include: (i) demonstration that the choice of the independent variables alters the particle thermodynamic description; (ii) demonstration that the mesoscopic thermodynamic transformations introduce additional terms of the order of the size of the local fluctuations, which prevent an unambiguous definition of both the heat and work; (iii) an emphasis on the importance of the choice of the proper estimators of the thermodynamic properties that are embedded in the chosen thermodynamic description; and (iv) a clearly defined path for determining any thermodynamic quantity dressed by the fluctuations. The further insight provided by this deeper analysis is useful for both readers interested in the GenDPDE theoretical framework, as well as readers interested in the practical ramifications of the analysis, namely, the alternative heat flow model.
- 16 June 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (6) , 062128
Generalized energy-conserving dissipative particle dynamics revisited: Insight from the thermodynamics of the mesoparticle leading to an alternative heat flow model
Recently we introduced the generalized energy-conserving dissipative particle dynamics method (GenDPDE) [J. Bonet Avalos, M. Lísal, J. P. Larentzos, A. D. Mackie, and J. K. Brennan, Phys. Chem. Chem. Phys. 21, 24891 (2019)], which has been formulated for an emerging class of density- and temperature-dependent coarse-grain models. In the original work, GenDPDE was formulated to ensure a fundamental link is maintained with the underlying physical system at the higher resolution scale. In this paper, we revisit the formulation of the GenDPDE method, and rederive the particle thermodynamics to ensure consistency at the opposing scale extreme, i.e., between the local thermodynamics in the mesoscopic systems and the corresponding macroscopic properties. We demonstrate this consistency by introducing unambiguous, physically meaningful definitions of the heat and work, which lead to the formulation of an alternative heat flow model that is analogous to Fourier's law of heat conduction. We present further analysis of the internal, unresolved degrees-of-freedom of the mesoparticles by considering the thermodynamics of an individual mesoparticle within the GenDPDE framework. Several key outcomes of the analysis include: (i) demonstration that the choice of the independent variables alters the particle thermodynamic description; (ii) demonstration that the mesoscopic thermodynamic transformations introduce additional terms of the order of the size of the local fluctuations, which prevent an unambiguous definition of both the heat and work; (iii) an emphasis on the importance of the choice of the proper estimators of the thermodynamic properties that are embedded in the chosen thermodynamic description; and (iv) a clearly defined path for determining any thermodynamic quantity dressed by the fluctuations. The further insight provided by this deeper analysis is useful for both readers interested in the GenDPDE theoretical framework, as well as readers interested in the practical ramifications of the analysis, namely, the alternative heat flow model.
- 6 November 2019
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 21 (45) , 24891-24911
Generalised dissipative particle dynamics with energy conservation: density- and temperature-dependent potentials
Energy-conserving dissipative particle dynamics method appropriate for particle interaction force fields that are both density- and temperature-dependent.
- 6 November 2019
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 21 (45) , 24891-24911
Generalised dissipative particle dynamics with energy conservation: density- and temperature-dependent potentials
Energy-conserving dissipative particle dynamics method appropriate for particle interaction force fields that are both density- and temperature-dependent.