Lixin Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lixin Yu has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
Kangliang Peng
13 shared publicationsXiaoling Zeng
School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
12 shared publicationsYoujun Zhao
11 shared publicationsDandan Sun
School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
10 shared publicationsMengzhu Hu
College of Materials Science and Engineering, Nanchang University, Nanchang, People’s Republic of China
9 shared publicationsXiao Min
College of Materials Science and Engineering, Nanchang University, Nanchang, People’s Republic of China
9 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (5)
Unravelling the H 2 O-assisted high-pressure sintering mechanism: A route to highly transparent cubic alumina ceramics
Transparent cubic alumina (γ‑Al2O3) ceramics are promising optical materials but challenging to densify without phase transformation or cracking. Herein, we report a novel H2O‑assisted high‑pressure sintering (HPS) strategy that enables the fabrication of highly transparent, crack‑free γ‑Al2O3 ceramics at temperatures as low as 300 °C. By combining GPa‑level pressures (0.8-5 GPa) with precisely controlled H2O concentrations (5–75 wt.%) as a transient solvent, we achieve near‑theoretical densities (>99%) and exceptional optical transmittance (>80% in the visible range). Systematic investigation reveals a non‑monotonic dependence of densification and transparency on H2O content, with an optimal concentration of ~15 wt.% under 5 GPa. Microstructural and spectroscopic analyses correlate superior optical quality with a pore‑free, nanocrystalline microstructure and the absence of secondary phases. Crucially, through integrated first‑principles calculations and ab initio molecular dynamics simulations, we unravel the atomic‑scale mechanism. Namely, under high pressure, H2O dissociates at the particle interface, with the resultant H⁺ forming Al‑H bonds and OH⁻ incorporating into interstitial lattice sites. This process stabilizes a hydroxyl‑cubic aluminate (HAl2O4)‑ like structure, which not only facilitates stress‑free densification via an enhanced dissolution‑precipitation pathway but also effectively relieves internal stresses that typically cause cracking in pressure‑only sintering. This work provides a fundamental mechanistic understanding of the synergistic role of H2O and ultra‑high pressure in low‑temperature ceramic consolidation, establishing a generalizable route to transparent nanocrystalline ceramics that are otherwise inaccessible via conventional thermal sintering.
- 1 May 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (5)
Open AccessUnravelling the H 2 O-assisted high-pressure sintering mechanism: A route to highly transparent cubic alumina ceramics
Transparent cubic alumina (γ‑Al2O3) ceramics are promising optical materials but challenging to densify without phase transformation or cracking. Herein, we report a novel H2O‑assisted high‑pressure sintering (HPS) strategy that enables the fabrication of highly transparent, crack‑free γ‑Al2O3 ceramics at temperatures as low as 300 °C. By combining GPa‑level pressures (0.8-5 GPa) with precisely controlled H2O concentrations (5–75 wt.%) as a transient solvent, we achieve near‑theoretical densities (>99%) and exceptional optical transmittance (>80% in the visible range). Systematic investigation reveals a non‑monotonic dependence of densification and transparency on H2O content, with an optimal concentration of ~15 wt.% under 5 GPa. Microstructural and spectroscopic analyses correlate superior optical quality with a pore‑free, nanocrystalline microstructure and the absence of secondary phases. Crucially, through integrated first‑principles calculations and ab initio molecular dynamics simulations, we unravel the atomic‑scale mechanism. Namely, under high pressure, H2O dissociates at the particle interface, with the resultant H⁺ forming Al‑H bonds and OH⁻ incorporating into interstitial lattice sites. This process stabilizes a hydroxyl‑cubic aluminate (HAl2O4)‑ like structure, which not only facilitates stress‑free densification via an enhanced dissolution‑precipitation pathway but also effectively relieves internal stresses that typically cause cracking in pressure‑only sintering. This work provides a fundamental mechanistic understanding of the synergistic role of H2O and ultra‑high pressure in low‑temperature ceramic consolidation, establishing a generalizable route to transparent nanocrystalline ceramics that are otherwise inaccessible via conventional thermal sintering.
- 27 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (19) , 8184-8193
CsPbX 3 /LaPO 4 :Eu 3+ dual-emission composites with stimuli-responsive fluorescence switching for advanced anti-counterfeiting
A CsPbX 3 /LaPO 4 :Eu 3+ composite material with dual-emission characteristics was synthesized via an in situ growth approach. This material combines a broad tunable emission range with excellent environmental stability.
- 27 March 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (19) , 8184-8193
CsPbX 3 /LaPO 4 :Eu 3+ dual-emission composites with stimuli-responsive fluorescence switching for advanced anti-counterfeiting
A CsPbX 3 /LaPO 4 :Eu 3+ composite material with dual-emission characteristics was synthesized via an in situ growth approach. This material combines a broad tunable emission range with excellent environmental stability.
- 12 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (6) , 2370-2384
Improved green synthesis of manganese-based halide perovskites via high-energy ball milling and their multiple applications
Manganese-based halide perovskite hosts were synthesized via an improved high-energy ball-milling method using low-cost MnBr 2 ·4H 2 O as the raw material, exhibiting excellent optical properties, thermal stability and photostability, and response to multiple stimuli.
- 12 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (6) , 2370-2384
Improved green synthesis of manganese-based halide perovskites via high-energy ball milling and their multiple applications
Manganese-based halide perovskite hosts were synthesized via an improved high-energy ball-milling method using low-cost MnBr 2 ·4H 2 O as the raw material, exhibiting excellent optical properties, thermal stability and photostability, and response to multiple stimuli.
- 23 July 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Green Synthesis of Dual-Emission Tin-Doped Cesium Manganese Halide Nanocrystals with High Performance
Manganese-based halide perovskites have gradually become a focus point for exploring photoluminescent materials due to their attractive electronic and photophysical properties. However, little attention has been paid to the dual-emission and thermochromic phenomena in all-inorganic Mn-based materials. In this study, Sn2+-doped Cs3MnBr3Cl2 is synthesized at room temperature, which exhibits bright yellow emission, with two broad emission peaks at 525 and 605 nm, corresponding to full width at half-maximum (fwhm) of 92 and 91 nm, respectively. The photoluminescence quantum yield (PLQY) is significantly increased from 5.3% for the absence of Sn2+ to 33.41% for the presence of Sn2+. The excitation, temperature-dependent, and time-resolved spectra indicate that the dual emissions originate from the spin-forbidden transition (4T1 → 6A1) of Mn2+ and the self-trapped exciton emission induced by Sn2+ doping. The introduction of Sn2+ modifies the crystal field environment and symmetry around Mn2+, intensifying the electron-phonon coupling, thereby causing the emergence of a new emission peak and significant broadening of the fwhm. Furthermore, due to the different temperature sensitivities of the two emission peaks, the emitted color is transitioned from yellow to orange-red as the temperature is increased. Combined with its enhanced stability, this material demonstrates promising application potential in the optoelectronic field.
- 23 July 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Green Synthesis of Dual-Emission Tin-Doped Cesium Manganese Halide Nanocrystals with High Performance
Manganese-based halide perovskites have gradually become a focus point for exploring photoluminescent materials due to their attractive electronic and photophysical properties. However, little attention has been paid to the dual-emission and thermochromic phenomena in all-inorganic Mn-based materials. In this study, Sn2+-doped Cs3MnBr3Cl2 is synthesized at room temperature, which exhibits bright yellow emission, with two broad emission peaks at 525 and 605 nm, corresponding to full width at half-maximum (fwhm) of 92 and 91 nm, respectively. The photoluminescence quantum yield (PLQY) is significantly increased from 5.3% for the absence of Sn2+ to 33.41% for the presence of Sn2+. The excitation, temperature-dependent, and time-resolved spectra indicate that the dual emissions originate from the spin-forbidden transition (4T1 → 6A1) of Mn2+ and the self-trapped exciton emission induced by Sn2+ doping. The introduction of Sn2+ modifies the crystal field environment and symmetry around Mn2+, intensifying the electron-phonon coupling, thereby causing the emergence of a new emission peak and significant broadening of the fwhm. Furthermore, due to the different temperature sensitivities of the two emission peaks, the emitted color is transitioned from yellow to orange-red as the temperature is increased. Combined with its enhanced stability, this material demonstrates promising application potential in the optoelectronic field.
- 19 March 2025
- Published by Elsevier in Journal of Solid State Chemistry
- Vol. 347
Facile synthesis of nanoflower-like NiMoO4/NiO structures for supercapacitive electrode materials
- 19 March 2025
- Published by Elsevier in Journal of Solid State Chemistry
- Vol. 347
Facile synthesis of nanoflower-like NiMoO4/NiO structures for supercapacitive electrode materials
- 27 September 2024
- Published by Elsevier in Optical Materials
- Vol. 157
Luminescent color modulation of Zn/BaAl2O4:0.2%Eu phosphors for LED application
- 27 September 2024
- Published by Elsevier in Optical Materials
- Vol. 157
Luminescent color modulation of Zn/BaAl2O4:0.2%Eu phosphors for LED application
- 22 July 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (20) , 39504-39515
ZBS glass synthesized containing both Eu3+-Eu2+ CsPbBr3 quantum dots with multi-color luminescence for white LEDs
- 22 July 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (20) , 39504-39515
ZBS glass synthesized containing both Eu3+-Eu2+ CsPbBr3 quantum dots with multi-color luminescence for white LEDs
- 18 June 2024
- Published by Wiley in Luminescence
- Vol. 39 (6) , e4807
Adjusting luminescence properties of ZnAl2O4:Mn2+(Mn4+), Li+ phosphors through cation substitution
ZnAl2O4 with a typical spinel structure is highly expected to be a novel rare‐earth‐free ion‐activated oxide phosphor with red emission, which holds high actual meaning for advancing phosphor‐converted light‐emitting diode (pc‐LED) lighting. Among the rare‐earth‐free activators, Mn4+ ions have emerged as one of the most promising activators. Considering the price advantage of MnCO3 generating Mn2+ ions and the charge compensation effect potentially obtaining Mn4+ ions from Mn2+ ions, this research delves into a collection of ZnAl2O4:Mn2+(Mn4+), x Li+ (x = 0%–40%) phosphors with Li+ as co‐dopant and MnCO3 as Mn2+ dopant source prepared by a high temperature solid‐state reaction method. The lattice structure was investigated using X‐ray diffraction (XRD), photoluminescence (PL), and photoluminescence excitation (PLE) spectroscopy. Results suggest a relatively high probability of Li+ ions occupying Zn2+ lattice sites. Furthermore, Li+ ion doping was assuredly found to facilitate the oxidization of Mn2+ to Mn4+, leading to a shift of luminescence peak from 516 to 656 nm. An intriguing phenomenon that the emission color changed with the Li+ doping content was also observed. Meanwhile, the luminescence intensity and quantum yield (QY) at different temperatures, as well as the relevant thermal quenching mechanism, were determined and elucidated detailedly.
- 18 June 2024
- Published by Wiley in Luminescence
- Vol. 39 (6) , e4807
Adjusting luminescence properties of ZnAl2O4:Mn2+(Mn4+), Li+ phosphors through cation substitution
ZnAl2O4 with a typical spinel structure is highly expected to be a novel rare‐earth‐free ion‐activated oxide phosphor with red emission, which holds high actual meaning for advancing phosphor‐converted light‐emitting diode (pc‐LED) lighting. Among the rare‐earth‐free activators, Mn4+ ions have emerged as one of the most promising activators. Considering the price advantage of MnCO3 generating Mn2+ ions and the charge compensation effect potentially obtaining Mn4+ ions from Mn2+ ions, this research delves into a collection of ZnAl2O4:Mn2+(Mn4+), x Li+ (x = 0%–40%) phosphors with Li+ as co‐dopant and MnCO3 as Mn2+ dopant source prepared by a high temperature solid‐state reaction method. The lattice structure was investigated using X‐ray diffraction (XRD), photoluminescence (PL), and photoluminescence excitation (PLE) spectroscopy. Results suggest a relatively high probability of Li+ ions occupying Zn2+ lattice sites. Furthermore, Li+ ion doping was assuredly found to facilitate the oxidization of Mn2+ to Mn4+, leading to a shift of luminescence peak from 516 to 656 nm. An intriguing phenomenon that the emission color changed with the Li+ doping content was also observed. Meanwhile, the luminescence intensity and quantum yield (QY) at different temperatures, as well as the relevant thermal quenching mechanism, were determined and elucidated detailedly.
- 14 November 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (2) , 3958-3966
Pb2+/Mn2+ co-doped Cs2ZnBr4 microcrystals with dual-band tunable white light emission
- 14 November 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (2) , 3958-3966
Pb2+/Mn2+ co-doped Cs2ZnBr4 microcrystals with dual-band tunable white light emission
- 22 June 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (17) , 29317-29326
Hydrothermal synthesis and tunable luminescence of YPO4:Eu2+/Eu3+, Tb3+ nanocrystals
- 22 June 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (17) , 29317-29326
Hydrothermal synthesis and tunable luminescence of YPO4:Eu2+/Eu3+, Tb3+ nanocrystals