Sven-Erik Gryning
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sven-Erik Gryning has a total of 168 co-authors. Here are the top co-authors by number of shared publications:
- Ekaterina Batchvarova
Bulgarian Academy of Sciences
11 shared publications - Lise Lotte Sørensen
Department of Environmental Science, iClimate, Arctic Research Center, Aarhus University, 4000 Roskilde, Denmark
8 shared publications - Rogier Floors
Technical University of Denmark, Roskilde, Denmark
8 shared publications Ekaterina Batchvarova
7 shared publications- Henrik Skov
Department of Environmental Science, Aarhus University, Aarhus, Denmark
7 shared publications Henrik Skov
Climate, Arctic Research Center, Department of Environmental Science Aarhus University Aarhus Denmark
5 shared publications
Latest Publications
- Open Access
- 10 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-62
Observations from a 94-GHz spectral polarimetric vertically-pointing radar at Villum research station during the CLAVIER Clean Cloud campaign
This paper presents a dataset obtained from a ground-based W-band (94 GHz) Doppler spectral polarimetric cloud radar (WProf) during the CLeancloud Arctic VIllum ExpeRiment (Clavier) campaign at Villum Research Station, Northeast Greenland, from 23 March to 13 April 2024. The campaign aimed to investigate Arctic cloud microphysical processes and aerosol–cloud interactions under pristine and Arctic haze conditions. Here, we describe the WProf radar measurements and the full processing chain, including noise removal and quality-control filtering, ensuring complete traceability from raw spectra to higher-level products. To resolve the complex microphysical structure of Arctic clouds, the peakTree algorithm was applied to Doppler spectra to identify and characterize multimodal velocity distributions, enabling the detection of coexisting hydrometeor populations within individual radar volumes. Peak-resolved spectral parameters are subsequently used within a hydrometeor classification framework implemented in pyLARDA enabling the identification of liquid droplets, pristine ice crystals, aggregates and rimed particles. The dataset captures a wide range of Arctic spring cloud regimes, including persistent mixed-phase clouds, deep and shallow ice-precipitating systems, and vertically structured seeder–feeder configurations. The observations indicate that multimodality is a common feature of Arctic clouds, particularly during periods of active ice growth, aggregation, and cloud-layer interaction. As dynamic forcing weakens, cloud systems frequently evolve toward shallower and more homogeneous stratiform states with reduced spectral complexity. Overall, the dataset provides a solid basis for studying Arctic aerosol-cloud interactions and cloud microphysics for evaluating the cloud and precipitation parameterizations in models.
- 10 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-62
Open AccessObservations from a 94-GHz spectral polarimetric vertically-pointing radar at Villum research station during the CLAVIER Clean Cloud campaign
This paper presents a dataset obtained from a ground-based W-band (94 GHz) Doppler spectral polarimetric cloud radar (WProf) during the CLeancloud Arctic VIllum ExpeRiment (Clavier) campaign at Villum Research Station, Northeast Greenland, from 23 March to 13 April 2024. The campaign aimed to investigate Arctic cloud microphysical processes and aerosol–cloud interactions under pristine and Arctic haze conditions. Here, we describe the WProf radar measurements and the full processing chain, including noise removal and quality-control filtering, ensuring complete traceability from raw spectra to higher-level products. To resolve the complex microphysical structure of Arctic clouds, the peakTree algorithm was applied to Doppler spectra to identify and characterize multimodal velocity distributions, enabling the detection of coexisting hydrometeor populations within individual radar volumes. Peak-resolved spectral parameters are subsequently used within a hydrometeor classification framework implemented in pyLARDA enabling the identification of liquid droplets, pristine ice crystals, aggregates and rimed particles. The dataset captures a wide range of Arctic spring cloud regimes, including persistent mixed-phase clouds, deep and shallow ice-precipitating systems, and vertically structured seeder–feeder configurations. The observations indicate that multimodality is a common feature of Arctic clouds, particularly during periods of active ice growth, aggregation, and cloud-layer interaction. As dynamic forcing weakens, cloud systems frequently evolve toward shallower and more homogeneous stratiform states with reduced spectral complexity. Overall, the dataset provides a solid basis for studying Arctic aerosol-cloud interactions and cloud microphysics for evaluating the cloud and precipitation parameterizations in models.
- 28 January 2026
- Published by Springer Nature
- p. 311-317
Remote Sensing of Wind and Aerosol Profiles in the High Arctic
- 28 January 2026
- Published by Springer Nature
- p. 311-317
Remote Sensing of Wind and Aerosol Profiles in the High Arctic
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Retrieving Microphysical Properties of Arctic and Mediterranean clouds using a synergy of remote sensing and in situ instrumentation
Aerosol-Cloud Interactions (ACI) play an important role in the hydrological cycle and are strong modulators of cloud radiative forcing and climate. Nevertheless, they remain poorly understood and constrained despite decades of research, because many processes and feedbacks are highly uncertain and are challenging to describe in regional and global climate models. Even less understood is the role of natural aerosol and ACI in a post-fossil future, where anthropogenic emissions is vastly reduced but emerging “natural” aerosol sources modulated by anthropogenic climate change (biomass burning, bioaerosols, dust) will dominate. The CleanCloud project aims to address these uncertainties and as part of its activities carries out major observational field campaigns at climate hot spots (Arctic, Mediterranean) to better constrain ACI processes, and, evaluate, improve and develop new remote sensing algorithms for studying aerosols, clouds and ACI.The first CleanCloud campaign was based at the Villum Research Station (81.6° N, 16.6° W) in North Greenland, with in-situ and remote sensing measurements, and consisted of two phases, one during the spring (16 March – 13 April) and one during summer (16 July – 13 August) of 2024, in collaboration with the NASA ARCSIX aircraft mission. The second campaign, named “Cleancloud Helmos OrograPhic site experimeNt (CHOPIN)”, is ongoing and is anticipated to last for 6 months, starting from 1 October at Mt.Helmos (38.0o N, 22.2o E) in the Peloponnese, Greece. A series of in situ and remote sensing measurements were distributed at 6 sites along the lee side of Mt. Helmos, 4 at the Kalavrita ski Center’s parking lot (altitude ~ 1690 m), 1 at the foothills (altitude ~ 1747 m) and the Helmos Hellenic Atmospheric Aerosol and Climate Change station ((HAC)2) at the mountaintop (altitude ~ 2314 m) constrain almost every aspect of the aerosols, clouds and their interaction in the region – and especially in the orographic clouds that form at the (HAC)2 station.Here, we present results from these two campaigns to examine the cloud (e.g., droplet number concentration & size) and aerosol microphysical characteristics (size distribution, CCN concentrations, chemical composition, bioaerosol number concentration and type) and cloud-scale dynamical forcing (vertical velocity) to understand their contribution to ACI processes. Radiosondes to derive the vertical structure of the atmosphere, Lidar systems and sun photometers were used to determine the presence of aerosol amount, their altitude and type (bioaerosol, dust, pollution, biomass burning) as well as the aerosol optical and columnar microphysical properties, Doppler lidars for turbulence and cloud-scale dynamics, radars to obtain the microphysical properties of the clouds, and finally satellites to retrieve the spatio-temporal evolution of the clouds. Additionally, in the case of CHOPIN campaign, cloud probes and cloud samplers were used to perform in-cloud sampling and to obtain the cloud microphysical properties. Thus, the use of this synergistic approach enables us to perform closure studies and to improve our current retrievals to predict cloud properties. These extensive field campaigns will aid in developing new ACI-related retrieval algorithms, development/improvement of parameterizations, and the ESA EarthCARE calibration/validation activities.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessRetrieving Microphysical Properties of Arctic and Mediterranean clouds using a synergy of remote sensing and in situ instrumentation
Aerosol-Cloud Interactions (ACI) play an important role in the hydrological cycle and are strong modulators of cloud radiative forcing and climate. Nevertheless, they remain poorly understood and constrained despite decades of research, because many processes and feedbacks are highly uncertain and are challenging to describe in regional and global climate models. Even less understood is the role of natural aerosol and ACI in a post-fossil future, where anthropogenic emissions is vastly reduced but emerging “natural” aerosol sources modulated by anthropogenic climate change (biomass burning, bioaerosols, dust) will dominate. The CleanCloud project aims to address these uncertainties and as part of its activities carries out major observational field campaigns at climate hot spots (Arctic, Mediterranean) to better constrain ACI processes, and, evaluate, improve and develop new remote sensing algorithms for studying aerosols, clouds and ACI.The first CleanCloud campaign was based at the Villum Research Station (81.6° N, 16.6° W) in North Greenland, with in-situ and remote sensing measurements, and consisted of two phases, one during the spring (16 March – 13 April) and one during summer (16 July – 13 August) of 2024, in collaboration with the NASA ARCSIX aircraft mission. The second campaign, named “Cleancloud Helmos OrograPhic site experimeNt (CHOPIN)”, is ongoing and is anticipated to last for 6 months, starting from 1 October at Mt.Helmos (38.0o N, 22.2o E) in the Peloponnese, Greece. A series of in situ and remote sensing measurements were distributed at 6 sites along the lee side of Mt. Helmos, 4 at the Kalavrita ski Center’s parking lot (altitude ~ 1690 m), 1 at the foothills (altitude ~ 1747 m) and the Helmos Hellenic Atmospheric Aerosol and Climate Change station ((HAC)2) at the mountaintop (altitude ~ 2314 m) constrain almost every aspect of the aerosols, clouds and their interaction in the region – and especially in the orographic clouds that form at the (HAC)2 station.Here, we present results from these two campaigns to examine the cloud (e.g., droplet number concentration & size) and aerosol microphysical characteristics (size distribution, CCN concentrations, chemical composition, bioaerosol number concentration and type) and cloud-scale dynamical forcing (vertical velocity) to understand their contribution to ACI processes. Radiosondes to derive the vertical structure of the atmosphere, Lidar systems and sun photometers were used to determine the presence of aerosol amount, their altitude and type (bioaerosol, dust, pollution, biomass burning) as well as the aerosol optical and columnar microphysical properties, Doppler lidars for turbulence and cloud-scale dynamics, radars to obtain the microphysical properties of the clouds, and finally satellites to retrieve the spatio-temporal evolution of the clouds. Additionally, in the case of CHOPIN campaign, cloud probes and cloud samplers were used to perform in-cloud sampling and to obtain the cloud microphysical properties. Thus, the use of this synergistic approach enables us to perform closure studies and to improve our current retrievals to predict cloud properties. These extensive field campaigns will aid in developing new ACI-related retrieval algorithms, development/improvement of parameterizations, and the ESA EarthCARE calibration/validation activities.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Vertical measurements of aerosols in the high Arctic during the winter-spring transition using a tethered balloon.
Aerosol number size distributions, along with thermodynamic and dynamic parameters, were measured from the surface to 600 m using a tethered balloon, the Helikite. The field measurements were carried out at Villum Research Station in Northern Greenland from 23rd March to 2nd May 2024. During the transition from winter to spring, three types of atmospheric regimes were identified: (1) a background regime with a profile of uniformly distributed aerosols, represented by low particle number concentrations as well as number size distributions along the vertical axis similar to the surface number size distribution, (2) a winter-type regime characterized by a pollution layer observable at altitudes above 500 m and not observed at the surface, (3) new particle formation episodes in late April and beginning of May, which accompanied a warm airmass intrusion event that had trigged surface melt. Most of the profiles presented a temperature inversion below 200 m, and a low-level jet was sometimes visible between 50 m and 100 m. These recently acquired measurements helped to clarify when ground-based aerosol observations were representative for higher altitude aerosol populations. By capturing a warm airmass intrusion, a comparison could be established with previous events to better understand its impact on the Arctic climate.Aerosol number size distributions from the Helikite ranged from 8 nm to 3 µm measured with a Miniaturized Scanning Electrical Mobility Sizer (mSEMS, Brechtel) and a Portable Optical Particle Spectrometer (POPS, Hendix). Wind speed and direction were obtained with a SmartTether (Anasphere), and temperature and relative humidity with SHT85 sensors (Sensirion). Observations from the Helikite were complemented by measurements from the Villum Research Station with a ceilometer (Vaisala CL51) for cloud heights, a Scanning Mobility Particle Sizer (SMPS, TSI) for surface aerosol number size distributions and a stand-alone condensation particle counter (CPC, TSI) for number closure, and a 9-meter meteorological mast (temperature, relative humidity, wind, shortwave radiation). Back trajectories from the Lagrangian Analysis Tool LAGRANTO were also used to shed light on the warm airmass intrusion event.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessVertical measurements of aerosols in the high Arctic during the winter-spring transition using a tethered balloon.
Aerosol number size distributions, along with thermodynamic and dynamic parameters, were measured from the surface to 600 m using a tethered balloon, the Helikite. The field measurements were carried out at Villum Research Station in Northern Greenland from 23rd March to 2nd May 2024. During the transition from winter to spring, three types of atmospheric regimes were identified: (1) a background regime with a profile of uniformly distributed aerosols, represented by low particle number concentrations as well as number size distributions along the vertical axis similar to the surface number size distribution, (2) a winter-type regime characterized by a pollution layer observable at altitudes above 500 m and not observed at the surface, (3) new particle formation episodes in late April and beginning of May, which accompanied a warm airmass intrusion event that had trigged surface melt. Most of the profiles presented a temperature inversion below 200 m, and a low-level jet was sometimes visible between 50 m and 100 m. These recently acquired measurements helped to clarify when ground-based aerosol observations were representative for higher altitude aerosol populations. By capturing a warm airmass intrusion, a comparison could be established with previous events to better understand its impact on the Arctic climate.Aerosol number size distributions from the Helikite ranged from 8 nm to 3 µm measured with a Miniaturized Scanning Electrical Mobility Sizer (mSEMS, Brechtel) and a Portable Optical Particle Spectrometer (POPS, Hendix). Wind speed and direction were obtained with a SmartTether (Anasphere), and temperature and relative humidity with SHT85 sensors (Sensirion). Observations from the Helikite were complemented by measurements from the Villum Research Station with a ceilometer (Vaisala CL51) for cloud heights, a Scanning Mobility Particle Sizer (SMPS, TSI) for surface aerosol number size distributions and a stand-alone condensation particle counter (CPC, TSI) for number closure, and a 9-meter meteorological mast (temperature, relative humidity, wind, shortwave radiation). Back trajectories from the Lagrangian Analysis Tool LAGRANTO were also used to shed light on the warm airmass intrusion event.
- Open Access
- 5 July 2024
- Published by Copernicus GmbH
Relationship between Doppler wind lidar observed wind speed and Carrier-to-Noise ratio
We investigate the relationship between the CNR and the mean horizontal wind speed estimated by a Doppler lidar. Intuitively, high values of CNR represent high concentration of particles that backscatter the light beam and therefore denote observations with high accuracy, while decreasing values of the CNR gradually give rise to a higher uncertainty. For a Leosphere V2 Doppler wind lidar that was operated in DBS mode in the high Arctic, we observed three distinct ranges of the normalized mean wind speed along the range of CNR values. In the CNR range from ≈ -14 dB to -22 dB there is a decrease of about 5% in the observed mean horizontal wind speed. It is very fortunate that the decrease is followed by a flat plateau of the wind speed for CNR values between -22 dB and -26 dB in which the estimate of the wind speed is not sensitive to the choice of the CNR threshold value. An abrupt increase in the normalized wind speed for CNR values < -26 dB signifies that the backscattered signal becomes weak due to low aerosol concentrations and noise starts to corrupt the estimation of the mean wind speed. This characteristic pattern was also found in observations at the Meteorological Observatory Lindenberg using a WindCube 200s and a Stream Line XR system, both operating in VAD mode. But the specific CNR values separating the three distinct ranges are not quite the same. Generally, the flat plateau and the subsequent rapid increase as CNR values decrease further are well known and are a consequence of the detector sensitivity with respect to the noise level; this feature can help operators to identify a filter threshold suitable for their particular instrument. However, the decrease of the wind speed for CNR values between -14 dB and -22 dB deserves further investigation. Based on the two data sets of Doppler wind lidar observations, the decrease in the wind speed for CNR values, as well as the flat plateau will be presented and discussed. The CNR dependence on the observed wind speed is likely instrument dependent but can also have a sensitivity to height as well as meteorological conditions.
- 5 July 2024
- Published by Copernicus GmbH
Open AccessRelationship between Doppler wind lidar observed wind speed and Carrier-to-Noise ratio
We investigate the relationship between the CNR and the mean horizontal wind speed estimated by a Doppler lidar. Intuitively, high values of CNR represent high concentration of particles that backscatter the light beam and therefore denote observations with high accuracy, while decreasing values of the CNR gradually give rise to a higher uncertainty. For a Leosphere V2 Doppler wind lidar that was operated in DBS mode in the high Arctic, we observed three distinct ranges of the normalized mean wind speed along the range of CNR values. In the CNR range from ≈ -14 dB to -22 dB there is a decrease of about 5% in the observed mean horizontal wind speed. It is very fortunate that the decrease is followed by a flat plateau of the wind speed for CNR values between -22 dB and -26 dB in which the estimate of the wind speed is not sensitive to the choice of the CNR threshold value. An abrupt increase in the normalized wind speed for CNR values < -26 dB signifies that the backscattered signal becomes weak due to low aerosol concentrations and noise starts to corrupt the estimation of the mean wind speed. This characteristic pattern was also found in observations at the Meteorological Observatory Lindenberg using a WindCube 200s and a Stream Line XR system, both operating in VAD mode. But the specific CNR values separating the three distinct ranges are not quite the same. Generally, the flat plateau and the subsequent rapid increase as CNR values decrease further are well known and are a consequence of the detector sensitivity with respect to the noise level; this feature can help operators to identify a filter threshold suitable for their particular instrument. However, the decrease of the wind speed for CNR values between -14 dB and -22 dB deserves further investigation. Based on the two data sets of Doppler wind lidar observations, the decrease in the wind speed for CNR values, as well as the flat plateau will be presented and discussed. The CNR dependence on the observed wind speed is likely instrument dependent but can also have a sensitivity to height as well as meteorological conditions.
- Open Access
- 4 September 2023
- Published by Copernicus GmbH
Aerosol-layer structure and wind profile in the high Arctic
We present an investigation of the structure of the aerosol layer at the Villum Research Station located at Station Nord in the high Arctic. Knowledge of the aerosol layering is of interest for the interpretation of measurements of atmospheric chemistry and particles that control air pollution in the pristine atmosphere and for climate change (Arctic amplification). Based on one year of remote sensing measurements by a ceilometer and a wind lidar, we discovered that the structure of the atmosphere was very different from what is usually found at mid-latitudes. Combining the ceilometer and wind lidar observations indicated that the aerosol layer has depths of about 100 m and 230 m and few cases of depth between 100 and 230 m. Studies of profiles with no aerosol-layer depth, based on high frequency ceilometer observations, reveal cases of entraining air. We found that the annual wind roses indicate generally westerly wind veering by more than 30 degrees between 40 and 200 m and a wind speed slowly increasing with height of about 5 m/s. It was found that the individual wind speed profiles between 40 and 200 m can roughly be categorized into 4 groups: 1. The wind speed increases from the ground up to 100m and thereafter decreasing (likely drainage); 2. The wind profile decreases from the ground up to a minimum at about 100 m; above this minimum the wind speed increases (no explanation for this type of wind profile is offered); 3. Wind speed increases with altitude; 4. Wind speed decreases from the ground throughout the whole layer. The two-layer structure of the aerosols and the different categories of wind profiles complicates the interpretation of surface observations. We discuss the implication in terms of local versus remote sources of aerosols and the uncertainty in backward trajectory modelling. These data can be used further for meteorological and aerosol model validation in the lower atmosphere of the High Arctic.Funding information: Danish Environmental Agency ‘Monitoring of short-lived climate components in Arctic’; European Cooperation in Science and Technology, Grant/Award Number: COST Action CA18235 PROBE; National Science Fund of Bulgaria, Grant/Award Number: KП-06-Н34/1; Nationalt Udvalg for Forskningsinfrastruktur (NUFI)
- 4 September 2023
- Published by Copernicus GmbH
Open AccessAerosol-layer structure and wind profile in the high Arctic
We present an investigation of the structure of the aerosol layer at the Villum Research Station located at Station Nord in the high Arctic. Knowledge of the aerosol layering is of interest for the interpretation of measurements of atmospheric chemistry and particles that control air pollution in the pristine atmosphere and for climate change (Arctic amplification). Based on one year of remote sensing measurements by a ceilometer and a wind lidar, we discovered that the structure of the atmosphere was very different from what is usually found at mid-latitudes. Combining the ceilometer and wind lidar observations indicated that the aerosol layer has depths of about 100 m and 230 m and few cases of depth between 100 and 230 m. Studies of profiles with no aerosol-layer depth, based on high frequency ceilometer observations, reveal cases of entraining air. We found that the annual wind roses indicate generally westerly wind veering by more than 30 degrees between 40 and 200 m and a wind speed slowly increasing with height of about 5 m/s. It was found that the individual wind speed profiles between 40 and 200 m can roughly be categorized into 4 groups: 1. The wind speed increases from the ground up to 100m and thereafter decreasing (likely drainage); 2. The wind profile decreases from the ground up to a minimum at about 100 m; above this minimum the wind speed increases (no explanation for this type of wind profile is offered); 3. Wind speed increases with altitude; 4. Wind speed decreases from the ground throughout the whole layer. The two-layer structure of the aerosols and the different categories of wind profiles complicates the interpretation of surface observations. We discuss the implication in terms of local versus remote sources of aerosols and the uncertainty in backward trajectory modelling. These data can be used further for meteorological and aerosol model validation in the lower atmosphere of the High Arctic.Funding information: Danish Environmental Agency ‘Monitoring of short-lived climate components in Arctic’; European Cooperation in Science and Technology, Grant/Award Number: COST Action CA18235 PROBE; National Science Fund of Bulgaria, Grant/Award Number: KП-06-Н34/1; Nationalt Udvalg for Forskningsinfrastruktur (NUFI)
- Open Access
- 17 February 2023
- Published by Wiley in International Journal of Climatology
- Vol. 43 (7) , 3247-3263
Observed aerosol‐layer depth at Station Nord in the high Arctic
The depth of the aerosol layer at the Villum Research Station at Station Nord in the high Arctic is analysed based on 8 years of observations from a ceilometer and one full year from a wind lidar. The layer is of particular interest for aerosol process modelling and atmospheric chemistry studies. The depth of the aerosol layer is assigned to the inflection point in the attenuated backscatter profile by two methods; one is based on polynomial approximation of the profile and the other is direct numerical differentiation. The analysis is based on two types of hourly profiles; one consists of averaging the attenuated backscatter observations and the other by computing the median. Due to sporadic occurrence of outliers in the ranges around 50 m in the ceilometer observations, this part of the profile is not used in this study. Restricting the observations to heights above 100 m, the depths of the aerosol layer are found to be typically ≈230 m. It varies little between winter and summer, but the spread in the depth is larger during the winter as compared to summer. To extend the study of the aerosol‐layer depth below 100 m, a method is applied that combines the ceilometer measurements with the carrier‐to‐noise ratio from the wind lidar. The results are available for 2018 only, and they show aerosol‐layer depths below ≈80 m as well as depths around 230 m and they show few observations between ≈80 and ≈230 m. Near the ground, the observed backscatter exhibits a pronounced seasonal variation, having low values during the summer and high values during the winter. The strength of the seasonal variability decreases with height, especially above the aerosol‐layer depth, and is virtually absent at 1 km.
- 17 February 2023
- Published by Wiley in International Journal of Climatology
- Vol. 43 (7) , 3247-3263
Open AccessObserved aerosol‐layer depth at Station Nord in the high Arctic
The depth of the aerosol layer at the Villum Research Station at Station Nord in the high Arctic is analysed based on 8 years of observations from a ceilometer and one full year from a wind lidar. The layer is of particular interest for aerosol process modelling and atmospheric chemistry studies. The depth of the aerosol layer is assigned to the inflection point in the attenuated backscatter profile by two methods; one is based on polynomial approximation of the profile and the other is direct numerical differentiation. The analysis is based on two types of hourly profiles; one consists of averaging the attenuated backscatter observations and the other by computing the median. Due to sporadic occurrence of outliers in the ranges around 50 m in the ceilometer observations, this part of the profile is not used in this study. Restricting the observations to heights above 100 m, the depths of the aerosol layer are found to be typically ≈230 m. It varies little between winter and summer, but the spread in the depth is larger during the winter as compared to summer. To extend the study of the aerosol‐layer depth below 100 m, a method is applied that combines the ceilometer measurements with the carrier‐to‐noise ratio from the wind lidar. The results are available for 2018 only, and they show aerosol‐layer depths below ≈80 m as well as depths around 230 m and they show few observations between ≈80 and ≈230 m. Near the ground, the observed backscatter exhibits a pronounced seasonal variation, having low values during the summer and high values during the winter. The strength of the seasonal variability decreases with height, especially above the aerosol‐layer depth, and is virtually absent at 1 km.
- Open Access
- 28 June 2022
- Published by Copernicus GmbH
Long-term ceilometer/wind-lidar observations of aerosol-layer depth in the Arctic
The depth of the aerosol layer at the Villum Research Station at Station Nord in the high Arctic is analyzed based on eight years of observations from a ceilometer. The depth of the aerosol layer is assigned to the inflection point in the attenuated backscatter profile by two methods; one is based on polynomial approximation of the profile and the other is direct numeric differentiation. The analysis is based on two types of hourly profiles; one consists of averaging the attenuated backscatter observations and the other by computing the median. It is noted that the depth of the aerosol layer in the Arctic might be different from the depth of the turbulent layer near the ground.Near the ground, the observed backscatter exhibits a pronounced seasonal variation, having low values during the summer and high values during the winter. The strength of the seasonal variability decreases with height and is virtually absent at 1 km.Due to sporadic occurrence of outliers in the range between 50 m and 80 m in the ceilometer observations, this part of the profile is not used in this study. Restricting the observations to heights above100 m, the depths of the aerosol layer are found to be typically 230-250 m. It varies little between winter and summer, but the spread in the depth was larger during the winter as compared to summer.To extend the profile of the attenuated backscatter below 100 m, the ceilometer measurements were combined with Carrier-To-Noise-Ratio observations from a Doppler wind Lidar. Thus, hourly profiles of attenuated backscatter starting at 40 m, are obtained. The results are available for 2018 only and they show aerosol-layer depths below 100 m as well as depths around 230-250 m and they show few observations of aerosol-layer depths between 100 m and 230 m.Acknowledgement: This article is based upon work from COST Action CA18235 PROBE, supported by COST (European Cooperation in Science and Technology). www.cost.eu.
- 28 June 2022
- Published by Copernicus GmbH
Open AccessLong-term ceilometer/wind-lidar observations of aerosol-layer depth in the Arctic
The depth of the aerosol layer at the Villum Research Station at Station Nord in the high Arctic is analyzed based on eight years of observations from a ceilometer. The depth of the aerosol layer is assigned to the inflection point in the attenuated backscatter profile by two methods; one is based on polynomial approximation of the profile and the other is direct numeric differentiation. The analysis is based on two types of hourly profiles; one consists of averaging the attenuated backscatter observations and the other by computing the median. It is noted that the depth of the aerosol layer in the Arctic might be different from the depth of the turbulent layer near the ground.Near the ground, the observed backscatter exhibits a pronounced seasonal variation, having low values during the summer and high values during the winter. The strength of the seasonal variability decreases with height and is virtually absent at 1 km.Due to sporadic occurrence of outliers in the range between 50 m and 80 m in the ceilometer observations, this part of the profile is not used in this study. Restricting the observations to heights above100 m, the depths of the aerosol layer are found to be typically 230-250 m. It varies little between winter and summer, but the spread in the depth was larger during the winter as compared to summer.To extend the profile of the attenuated backscatter below 100 m, the ceilometer measurements were combined with Carrier-To-Noise-Ratio observations from a Doppler wind Lidar. Thus, hourly profiles of attenuated backscatter starting at 40 m, are obtained. The results are available for 2018 only and they show aerosol-layer depths below 100 m as well as depths around 230-250 m and they show few observations of aerosol-layer depths between 100 m and 230 m.Acknowledgement: This article is based upon work from COST Action CA18235 PROBE, supported by COST (European Cooperation in Science and Technology). www.cost.eu.
- Open Access
- 18 June 2021
- Published by Copernicus GmbH
Comparison of ERA-5 reanalysis and observed cloud cover in the high Arctic
Knowledge and understanding of Arctic cloud properties is important for climate predictions and weather forecasts but limited because of scarcity of observational data on Arctic clouds in general and especially during the dark winter season. Prediction of clouds is known to be a major challenge in numerical weather forecasts and climate models and the shortage of observations for use in data-assimilation in the Arctic constitutes a further difficulty.We present results from an analyses of cloud cover based on profiles of the attenuated backscatter coefficient from an 8-year long data series (July 2011 – April 2019). The observations are carried out in the high Arctic by a ceilometer with a maximum range setting of 7.7 km from the Villum Research Station at Station Nord, Greenland. Results show that the hourly cloud cover turned out to follow a U-shaped rather than Gaussian-like distribution.Annual and seasonal cloud cover variation is illustrated. The cloud cover is larger during the autumn and winter as compared to summer and spring. The cloud cover exhibits a substantial variation from year to year without a clear trend. The cloud cover during spring is low and decreasing between 2012 and 2017. The cloud cover during the autumn of 2016 is lowest compared to the other years.The observed cloud cover is compared to the cloud cover provided in the ERA5 reanalysis data-set. The cloud cover for low clouds and medium clouds are combined to represent a total height of 6 km. Both the observed and modelled cloud cover is larger during winter as compared to summer-time cloud cover. The measured reduction in the cloud cover for the autumn of 2016 is present in the reanalysis data as well but the measured low cloud cover during spring is not apparent in the reanalysis data.The ability of the ERA-5 reanalysis data to predict the observed cloud cover was investigated. Because the cloud cover distribution is U-shaped rather than of a Gaussian nature, standard metrics are not applicable. We apply a generalized skill score that is developed for contingency tables or joint histograms. Three skill scores were calculated. It was found that for all three methods, skills for the predictability of the cloud cover by the ERA5 modelling is better for winter than summer and is poor during the spring.
- 18 June 2021
- Published by Copernicus GmbH
Open AccessComparison of ERA-5 reanalysis and observed cloud cover in the high Arctic
Knowledge and understanding of Arctic cloud properties is important for climate predictions and weather forecasts but limited because of scarcity of observational data on Arctic clouds in general and especially during the dark winter season. Prediction of clouds is known to be a major challenge in numerical weather forecasts and climate models and the shortage of observations for use in data-assimilation in the Arctic constitutes a further difficulty.We present results from an analyses of cloud cover based on profiles of the attenuated backscatter coefficient from an 8-year long data series (July 2011 – April 2019). The observations are carried out in the high Arctic by a ceilometer with a maximum range setting of 7.7 km from the Villum Research Station at Station Nord, Greenland. Results show that the hourly cloud cover turned out to follow a U-shaped rather than Gaussian-like distribution.Annual and seasonal cloud cover variation is illustrated. The cloud cover is larger during the autumn and winter as compared to summer and spring. The cloud cover exhibits a substantial variation from year to year without a clear trend. The cloud cover during spring is low and decreasing between 2012 and 2017. The cloud cover during the autumn of 2016 is lowest compared to the other years.The observed cloud cover is compared to the cloud cover provided in the ERA5 reanalysis data-set. The cloud cover for low clouds and medium clouds are combined to represent a total height of 6 km. Both the observed and modelled cloud cover is larger during winter as compared to summer-time cloud cover. The measured reduction in the cloud cover for the autumn of 2016 is present in the reanalysis data as well but the measured low cloud cover during spring is not apparent in the reanalysis data.The ability of the ERA-5 reanalysis data to predict the observed cloud cover was investigated. Because the cloud cover distribution is U-shaped rather than of a Gaussian nature, standard metrics are not applicable. We apply a generalized skill score that is developed for contingency tables or joint histograms. Three skill scores were calculated. It was found that for all three methods, skills for the predictability of the cloud cover by the ERA5 modelling is better for winter than summer and is poor during the spring.
- Open Access
- 16 October 2020
- Published by Wiley in International Journal of Climatology
- Vol. 41 (3) , 1584-1598
Observed and modelled cloud cover up to 6 km height at Station Nord in the high Arctic
We present results from an analyses of cloud cover based on profiles of the attenuated backscatter coefficient from an 8‐year‐long data series (July 2011–April 2019). The observations are carried out in the high Arctic by a ceilometer with a maximum range setting of 7.7 km from the Villum Research Station at Station Nord, Greenland. Results show that the hourly cloud cover turned out to follow a U‐shaped rather than Gaussian‐like distribution. Annual and seasonal cloud cover variation is illustrated. The cloud cover is larger during the autumn and winter as compared to summer and spring. The cloud cover exhibits a substantial variation from year to year without a clear trend. The cloud cover during spring is low and decreasing between 2012 and 2017. The cloud cover during the autumn of 2016 is lowest compared to the other years. The observed cloud cover is compared to the cloud cover provided in the ERA5 reanalysis dataset. The cloud cover for low clouds and medium clouds are combined to represent a total height of 6 km. Both the observed and modelled cloud cover is larger during winter as compared to summer‐time cloud cover. The measured reduction in the cloud cover for the autumn of 2016 is present in the reanalysis data as well but the measured low cloud cover during spring is not apparent in the reanalysis data. Because the cloud cover distribution is U‐shaped rather than of a Gaussian nature, standard metrics are not applicable. We apply a generalized skill score that is developed for contingency tables or joint histograms. Three skill scores were calculated. It was found that for all three methods, skills for the predictability of the cloud cover by the ERA5 modelling is better for winter than summer and is poor during the spring.
- 16 October 2020
- Published by Wiley in International Journal of Climatology
- Vol. 41 (3) , 1584-1598
Open AccessObserved and modelled cloud cover up to 6 km height at Station Nord in the high Arctic
We present results from an analyses of cloud cover based on profiles of the attenuated backscatter coefficient from an 8‐year‐long data series (July 2011–April 2019). The observations are carried out in the high Arctic by a ceilometer with a maximum range setting of 7.7 km from the Villum Research Station at Station Nord, Greenland. Results show that the hourly cloud cover turned out to follow a U‐shaped rather than Gaussian‐like distribution. Annual and seasonal cloud cover variation is illustrated. The cloud cover is larger during the autumn and winter as compared to summer and spring. The cloud cover exhibits a substantial variation from year to year without a clear trend. The cloud cover during spring is low and decreasing between 2012 and 2017. The cloud cover during the autumn of 2016 is lowest compared to the other years. The observed cloud cover is compared to the cloud cover provided in the ERA5 reanalysis dataset. The cloud cover for low clouds and medium clouds are combined to represent a total height of 6 km. Both the observed and modelled cloud cover is larger during winter as compared to summer‐time cloud cover. The measured reduction in the cloud cover for the autumn of 2016 is present in the reanalysis data as well but the measured low cloud cover during spring is not apparent in the reanalysis data. Because the cloud cover distribution is U‐shaped rather than of a Gaussian nature, standard metrics are not applicable. We apply a generalized skill score that is developed for contingency tables or joint histograms. Three skill scores were calculated. It was found that for all three methods, skills for the predictability of the cloud cover by the ERA5 modelling is better for winter than summer and is poor during the spring.