Alan Lugarini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alan Lugarini has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Admilson Teixeira Franco
Federal University of Technology-Paraná-UTFPR, Research Center for Rheology and Non-Newtonian Fluids-CERNN 2 , Rua Deputado Heitor Alencar Furtado 5000-Ecoville, Curitiba, Paraná 81280-340
6 shared publications Admilson T. Franco
4 shared publications- Marcelo Risso Errera
Universidade Federal do Paraná
2 shared publications - Rodrigo S. Romanus
Departamento Acadêmico de Engenharia Mecânica DAMEC, Universidade Tecnológica Federal do Paraná - UTFPR - Curitiba, Brazil
2 shared publications - Waine Oliveira Junior
Research Center for Rheology and Non‐Newtonian Fluids (CERNN), Postgraduate Program in Mechanical and Materials Engineering Federal University of Technology – Paraná (UTFPR) Curitiba Brazil
2 shared publications - Antonio Kozlik Junior
Universidade Tecnológica Federal do Paraná
1 shared publication
Latest Publications
- 23 April 2026
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 274
Nassu: A high performance LES solver for computational wind engineering
- 23 April 2026
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 274
Nassu: A high performance LES solver for computational wind engineering
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
The isolated effect of yield stress in viscoplastic turbulent flow
Turbulent flows of viscoplastic fluids are present in several industrial and natural applications. The effects of yield stress on this problem have always been studied as a part of a larger physical context, because real viscoplastic materials have many properties that cannot be easily isolated. Direct numerical simulations have recently emerged as a viable tool for investigating non-Newtonian fluid flow in turbulent regimes. In the present work, we solve the turbulent flow of an ideal Bingham fluid, focusing on the isolated effect of yield stress. A numerical scheme for viscoplastic flows was implemented based on the lattice Boltzmann method. An outstanding characteristic of this scheme is the possibility of representing infinite viscosity by setting the relaxation frequency to zero, enabling the representation of the Bingham constitutive equation without artifacts, and producing a more accurate representation of the yield surfaces. In the turbulent channel flow simulations, the friction Reynolds number was fixed at 180, while the Bingham number varied from 0 (Newtonian) to 0.15. It is shown that unyielded portions of material travel along with the flow near the centerline. These unyielded spots do not disappear quickly, but rather have a significant lifetime. Another interesting outcome is that the yield stress increases the turbulence anisotropy, by lowering the spanwise and normal velocity fluctuations, while the streamwise component becomes higher. Reynolds stresses and budgets of turbulent kinetic energy have been analyzed regarding the increased bulk velocities that were found by increasing the yield stress.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
The isolated effect of yield stress in viscoplastic turbulent flow
Turbulent flows of viscoplastic fluids are present in several industrial and natural applications. The effects of yield stress on this problem have always been studied as a part of a larger physical context, because real viscoplastic materials have many properties that cannot be easily isolated. Direct numerical simulations have recently emerged as a viable tool for investigating non-Newtonian fluid flow in turbulent regimes. In the present work, we solve the turbulent flow of an ideal Bingham fluid, focusing on the isolated effect of yield stress. A numerical scheme for viscoplastic flows was implemented based on the lattice Boltzmann method. An outstanding characteristic of this scheme is the possibility of representing infinite viscosity by setting the relaxation frequency to zero, enabling the representation of the Bingham constitutive equation without artifacts, and producing a more accurate representation of the yield surfaces. In the turbulent channel flow simulations, the friction Reynolds number was fixed at 180, while the Bingham number varied from 0 (Newtonian) to 0.15. It is shown that unyielded portions of material travel along with the flow near the centerline. These unyielded spots do not disappear quickly, but rather have a significant lifetime. Another interesting outcome is that the yield stress increases the turbulence anisotropy, by lowering the spanwise and normal velocity fluctuations, while the streamwise component becomes higher. Reynolds stresses and budgets of turbulent kinetic energy have been analyzed regarding the increased bulk velocities that were found by increasing the yield stress.
- Open Access
- 2 October 2024
- Published by Elsevier in Applications in Engineering Science
- Vol. 20
Lattice Boltzmann simulations of unsteady Bingham fluid flows
- 2 October 2024
- Published by Elsevier in Applications in Engineering Science
- Vol. 20
Open AccessLattice Boltzmann simulations of unsteady Bingham fluid flows
- 20 February 2023
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 95 (7) , 1076-1089
A graphic processing unit implementation for the moment representation of the lattice Boltzmann method
We implement the moment representation of the lattice Boltzmann method in a graphic processing unit (GPU) environment to study the computational performance of three‐dimensional fluid flows. The moment representation of the lattice Boltzmann method (MRLBM) uses up to second‐order moments of the particle distribution function to regularize and reconstruct it. By adopting this method, there is a reduction in memory usage and global memory transfer and, therefore, increased performance. The results show an increase of up to 40% in speed compared to population schemes. The validation results show there was no loss of accuracy when using single precision for turbulent flows. The adoption of single‐precision also enables higher processing speed for GPUs with low double‐precision capability and reduces the memory footprint, which can further increase performance. The implementation here presented provides a fast and straightforward environment for fluid simulation by combining single‐precision and the MRLBM.
- 20 February 2023
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 95 (7) , 1076-1089
A graphic processing unit implementation for the moment representation of the lattice Boltzmann method
We implement the moment representation of the lattice Boltzmann method in a graphic processing unit (GPU) environment to study the computational performance of three‐dimensional fluid flows. The moment representation of the lattice Boltzmann method (MRLBM) uses up to second‐order moments of the particle distribution function to regularize and reconstruct it. By adopting this method, there is a reduction in memory usage and global memory transfer and, therefore, increased performance. The results show an increase of up to 40% in speed compared to population schemes. The validation results show there was no loss of accuracy when using single precision for turbulent flows. The adoption of single‐precision also enables higher processing speed for GPUs with low double‐precision capability and reduces the memory footprint, which can further increase performance. The implementation here presented provides a fast and straightforward environment for fluid simulation by combining single‐precision and the MRLBM.
- 1 November 2021
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 102, 206-219
An immersed boundary-lattice Boltzmann framework for fully resolved simulations of non-spherical particle settling in unbounded domain
- 1 November 2021
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 102, 206-219
An immersed boundary-lattice Boltzmann framework for fully resolved simulations of non-spherical particle settling in unbounded domain
- 1 August 2021
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 166
Natural convection of a viscoplastic fluid in an enclosure filled with solid obstacles
- 1 August 2021
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 166
Natural convection of a viscoplastic fluid in an enclosure filled with solid obstacles
- Open Access
- 26 February 2021
- Published by Universidade Estadual de Londrina in Semina: Ciências Exatas e Tecnológicas
- Vol. 42 (1Supl) , 17-24
Low-cost device for active saliva droplet filtration and pathogen inactivation
This work presents a device capable of performing sanitization in environments using an electrostatic filter and ultraviolet light. Recognized techniques were employed in an innovative and low-cost construction model, like Corona Discharge and UVC germicidal light, using elements of easy acquisition and construction. The device consists of a tube with several electrostatic filters. On one side of the tube, an exhaust fan is installed to collect the air to be disinfected. So the air passes through the tubes with the electrostatic filter, which is responsible for collecting the particles suspended in the passing air, attracting them to the metal surface. Allied with this, UVC lights are also inserted in the structure, ensuring greater effectiveness in decontaminating the air that passes through the tubes. In the posterior side to the exhaust fan, the disinfected air is returned to the original environment. A Fluid dynamics simulation was made to investigate the airflow in a room. Standard strains for antimicrobial susceptibility testing were used for bioaerosols assay. The result is a low-cost equipment with great potential to deactivate several kinds of viruses, most especially the Sars-CoV-2 (Coronavirus), that is the main responsible for the global health crisis, designed to be used indoors with low ventilation.
- 26 February 2021
- Published by Universidade Estadual de Londrina in Semina: Ciências Exatas e Tecnológicas
- Vol. 42 (1Supl) , 17-24
Open AccessLow-cost device for active saliva droplet filtration and pathogen inactivation
This work presents a device capable of performing sanitization in environments using an electrostatic filter and ultraviolet light. Recognized techniques were employed in an innovative and low-cost construction model, like Corona Discharge and UVC germicidal light, using elements of easy acquisition and construction. The device consists of a tube with several electrostatic filters. On one side of the tube, an exhaust fan is installed to collect the air to be disinfected. So the air passes through the tubes with the electrostatic filter, which is responsible for collecting the particles suspended in the passing air, attracting them to the metal surface. Allied with this, UVC lights are also inserted in the structure, ensuring greater effectiveness in decontaminating the air that passes through the tubes. In the posterior side to the exhaust fan, the disinfected air is returned to the original environment. A Fluid dynamics simulation was made to investigate the airflow in a room. Standard strains for antimicrobial susceptibility testing were used for bioaerosols assay. The result is a low-cost equipment with great potential to deactivate several kinds of viruses, most especially the Sars-CoV-2 (Coronavirus), that is the main responsible for the global health crisis, designed to be used indoors with low ventilation.
- 26 February 2019
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 23 (3) , 44
Flow distribution uniformity in a comb-like microchannel network
- 26 February 2019
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 23 (3) , 44
Flow distribution uniformity in a comb-like microchannel network
- 7 May 2018
- Published by Wiley in Journal of Heat Transfer
- Vol. 140 (8)
Natural Convection and Surface Radiation in a Heated Wall, C-Shaped Fracture
The present study considers the coupled natural convection and surface radiation process through an open fracture of a solid wall facing a reservoir containing isothermal quiescent fluid (air). The fracture is modeled as a regular, C-shape path through the wall, with the vertical surface being heated and the horizontal ones adiabatic. The solid center section of the fracture is thermally participant inasmuch it can be heated or cooled by the natural convection process and by the radiation effect from the other surfaces of the fracture. The convection-radiation phenomenon is mathematically modeled and numerically simulated in a systematic parametric study of the thermal process as affected by changes in the fracture channel size, via changes in the size of the solid center section 0 < D < 1.0, surface emissivity 0 ≤ ε ≤ 1.0, Rayleigh number 105 ≤ Ra ≤ 108, and Pr = 0.71. Attention is given to the radiation shadowing effect caused by the center section of the fracture and of the interference effect, as the fracture channel changes in size, affecting the natural convection process through the fracture. An analytical prediction of the interference effect and an empirical correlation for predicting the total Nusselt number, both validated against the numerical results, are presented.
- 7 May 2018
- Published by Wiley in Journal of Heat Transfer
- Vol. 140 (8)
Natural Convection and Surface Radiation in a Heated Wall, C-Shaped Fracture
The present study considers the coupled natural convection and surface radiation process through an open fracture of a solid wall facing a reservoir containing isothermal quiescent fluid (air). The fracture is modeled as a regular, C-shape path through the wall, with the vertical surface being heated and the horizontal ones adiabatic. The solid center section of the fracture is thermally participant inasmuch it can be heated or cooled by the natural convection process and by the radiation effect from the other surfaces of the fracture. The convection-radiation phenomenon is mathematically modeled and numerically simulated in a systematic parametric study of the thermal process as affected by changes in the fracture channel size, via changes in the size of the solid center section 0 < D < 1.0, surface emissivity 0 ≤ ε ≤ 1.0, Rayleigh number 105 ≤ Ra ≤ 108, and Pr = 0.71. Attention is given to the radiation shadowing effect caused by the center section of the fracture and of the interference effect, as the fracture channel changes in size, affecting the natural convection process through the fracture. An analytical prediction of the interference effect and an empirical correlation for predicting the total Nusselt number, both validated against the numerical results, are presented.