Yixia Ren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yixia Ren has a total of 160 co-authors. Here are the top co-authors by number of shared publications:
Jijiang Wang
12 shared publicationsZhixiang Wang
Shaanxi Key Laboratory of Chemical Reaction Engineering, School of Chemistry and Chemical Engineering, Yan'an University, Yan'an 716000, P. R. China
12 shared publications- Ji-Jiang Wang
Yan'an City Key Laboratory of New Energy & New Functional Materials, Shaanxi Key Laboratory of Chemical Reaction Engineering, College of Chemistry and Chemical Engineering, Yan'an University, Yan'an 716000, PR China
11 shared publications Xiaoming Song
Shaanxi Key Laboratory of Chemical Reaction Engineering, Laboratory of New Energy and New Function Materials, College of Chemistry and Chemical Engineering, Yan’an University, Yan’an, China
11 shared publications- Mei-Li Zhang
Department of Chemistry and Chemical Engineering, Laboratory of New Energy & New Function Materials, Yan'an University, Yan'an, Shaanxi 716000, PR China
10 shared publications Ji-Jiang Wang
8 shared publications
Latest Publications
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (34) , 13950-13961
An anthracene ligand-mediated enhanced intermolecular electron transfer strategy to achieve the perfluoroalkylation of olefins using a 2D photoresponsive Cd-based coordination polymer
A Cd-based catalyst designed through ligand engineering not only catalyzes perfluoroalkyl iodides wildly effectively but also facilitates radical cycloadditions of dienes.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (34) , 13950-13961
An anthracene ligand-mediated enhanced intermolecular electron transfer strategy to achieve the perfluoroalkylation of olefins using a 2D photoresponsive Cd-based coordination polymer
A Cd-based catalyst designed through ligand engineering not only catalyzes perfluoroalkyl iodides wildly effectively but also facilitates radical cycloadditions of dienes.
- 25 August 2026
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 13 (17) , 5704-5709
Photoinduced disulfide-catalyzed hydrogermylation of α-trifluoromethylalkenes and alkenes
We have developed photoinduced disulfide-catalyzed hydrogermylation of α-trifluoromethylalkenes and alkenes with germyl hydrides to directly access valuable organogermanium compounds.
- 25 August 2026
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 13 (17) , 5704-5709
Photoinduced disulfide-catalyzed hydrogermylation of α-trifluoromethylalkenes and alkenes
We have developed photoinduced disulfide-catalyzed hydrogermylation of α-trifluoromethylalkenes and alkenes with germyl hydrides to directly access valuable organogermanium compounds.
- Open Access
- 13 July 2026
- Published by Elsevier in SSRN Electronic Journal
Ag@Cd-MOF Composite Hydrogel: Preparation, Tri-Function Fluorescent Sensing, and Antibacterial Properties
In this study, Ag@Cd-MOF composite hydrogel was successfully constructed via reductive doping and free radical polymerization technology. Structural characterization confirmed that Ag@Cd-MOF particles were uniformly dispersed in the hydrogel network, and the crystal structure of Cd-MOF remained intact. For fluorescent performance, the emission intensity of the composite hydrogel at 333 nm was enhanced by 89.1% compared with pure Cd-MOF. The fluorescence quenching efficiencies for cefixime (CEF), pyrimethanil (PTH), and 2,4-dinitrophenylhydrazine (2,4-DNP) reached 97.3%, 98.03%, and 93.1%, respectively, with corresponding detection limits of 0.12, 0.04, and 0.008 μM. Mechanism research indicated that the fluorescence quenching effect was mainly attributed to the synergistic effect of resonance energy transfer and competitive absorption. In the detection of CEF in milk samples, the spiked recovery rates ranged from 99.52% to 102.31% with relative standard deviations (RSD) of 0.72%-1.78%. Regarding antibacterial performance, the diameters of inhibition zones against three common pathogenic bacteria (Shigella flexneri, Shigella dysenteriae, and Staphylococcus aureus) were 22.7, 16.5, and 15.6 mm, respectively. The antibacterial rate remained above 74% after 72 hours, which was mainly due to the sustained bactericidal effect of Ag+ through the dual pathways of "membrane damage-intracellular metabolic interference". The material developed in this study, integrating efficient fluorescent detection and long-lasting antibacterial functions, provides a novel solution for food safety monitoring.
- 13 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAg@Cd-MOF Composite Hydrogel: Preparation, Tri-Function Fluorescent Sensing, and Antibacterial Properties
In this study, Ag@Cd-MOF composite hydrogel was successfully constructed via reductive doping and free radical polymerization technology. Structural characterization confirmed that Ag@Cd-MOF particles were uniformly dispersed in the hydrogel network, and the crystal structure of Cd-MOF remained intact. For fluorescent performance, the emission intensity of the composite hydrogel at 333 nm was enhanced by 89.1% compared with pure Cd-MOF. The fluorescence quenching efficiencies for cefixime (CEF), pyrimethanil (PTH), and 2,4-dinitrophenylhydrazine (2,4-DNP) reached 97.3%, 98.03%, and 93.1%, respectively, with corresponding detection limits of 0.12, 0.04, and 0.008 μM. Mechanism research indicated that the fluorescence quenching effect was mainly attributed to the synergistic effect of resonance energy transfer and competitive absorption. In the detection of CEF in milk samples, the spiked recovery rates ranged from 99.52% to 102.31% with relative standard deviations (RSD) of 0.72%-1.78%. Regarding antibacterial performance, the diameters of inhibition zones against three common pathogenic bacteria (Shigella flexneri, Shigella dysenteriae, and Staphylococcus aureus) were 22.7, 16.5, and 15.6 mm, respectively. The antibacterial rate remained above 74% after 72 hours, which was mainly due to the sustained bactericidal effect of Ag+ through the dual pathways of "membrane damage-intracellular metabolic interference". The material developed in this study, integrating efficient fluorescent detection and long-lasting antibacterial functions, provides a novel solution for food safety monitoring.
- Open Access
- 23 June 2026
- Published by Elsevier in SSRN Electronic Journal
Ag@Cd-MOF Composite Hydrogel: Preparation, Tri-Function Fluorescent Sensing, and Antibacterial Properties
In this study, Ag@Cd-MOF composite hydrogel was successfully constructed via reductive doping and free radical polymerization technology. Structural characterization confirmed that Ag@Cd-MOF particles were uniformly dispersed in the hydrogel network, and the crystal structure of Cd-MOF remained intact. For fluorescent performance, the emission intensity of the composite hydrogel at 333 nm was enhanced by 89.1% compared with pure Cd-MOF. The fluorescence quenching efficiencies for cefalexin (CEF), parathyroid hormone (PTH), and 2,4-dinitrophenol (2,4-DNP) reached 97.3%, 98.03%, and 93.1%, respectively, with corresponding detection limits of 0.12, 0.04, and 0.008 μM. Mechanism research indicated that the fluorescence quenching effect was mainly attributed to the synergistic effect of resonance energy transfer and competitive absorption. In the detection of CEF in milk samples, the spiked recovery rates ranged from 99.52% to 102.31% with relative standard deviations (RSD) of 0.72%-1.78%. Regarding antibacterial performance, the diameters of inhibition zones against three common pathogenic bacteria (Shigella flexneri, Shigella dysenteriae, and Staphylococcus aureus) were 22.7, 16.5, and 15.6 mm, respectively. The antibacterial rate remained above 85% after 72 hours, which was mainly due to the sustained bactericidal effect of Ag⁺ through the dual pathways of "membrane damage-intracellular metabolic interference". The material developed in this study, integrating efficient fluorescent detection and long-lasting antibacterial functions, provides a novel solution for food safety monitoring.
- 23 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAg@Cd-MOF Composite Hydrogel: Preparation, Tri-Function Fluorescent Sensing, and Antibacterial Properties
In this study, Ag@Cd-MOF composite hydrogel was successfully constructed via reductive doping and free radical polymerization technology. Structural characterization confirmed that Ag@Cd-MOF particles were uniformly dispersed in the hydrogel network, and the crystal structure of Cd-MOF remained intact. For fluorescent performance, the emission intensity of the composite hydrogel at 333 nm was enhanced by 89.1% compared with pure Cd-MOF. The fluorescence quenching efficiencies for cefalexin (CEF), parathyroid hormone (PTH), and 2,4-dinitrophenol (2,4-DNP) reached 97.3%, 98.03%, and 93.1%, respectively, with corresponding detection limits of 0.12, 0.04, and 0.008 μM. Mechanism research indicated that the fluorescence quenching effect was mainly attributed to the synergistic effect of resonance energy transfer and competitive absorption. In the detection of CEF in milk samples, the spiked recovery rates ranged from 99.52% to 102.31% with relative standard deviations (RSD) of 0.72%-1.78%. Regarding antibacterial performance, the diameters of inhibition zones against three common pathogenic bacteria (Shigella flexneri, Shigella dysenteriae, and Staphylococcus aureus) were 22.7, 16.5, and 15.6 mm, respectively. The antibacterial rate remained above 85% after 72 hours, which was mainly due to the sustained bactericidal effect of Ag⁺ through the dual pathways of "membrane damage-intracellular metabolic interference". The material developed in this study, integrating efficient fluorescent detection and long-lasting antibacterial functions, provides a novel solution for food safety monitoring.
- Open Access
- 17 June 2026
- Published by Elsevier in SSRN Electronic Journal
Ag@Cd-MOF Composite Hydrogel: Preparation, Tri-Function Fluorescent Sensing, and Antibacterial Properties
In this study, Ag@Cd-MOF composite hydrogel was successfully constructed via reductive doping and free radical polymerization technology. Structural characterization confirmed that Ag@Cd-MOF particles were uniformly dispersed in the hydrogel network, and the crystal structure of Cd-MOF remained intact. For fluorescent performance, the emission intensity of the composite hydrogel at 333 nm was enhanced by 89.1% compared with pure Cd-MOF. The fluorescence quenching efficiencies for cefalexin (CEF), parathyroid hormone (PTH), and 2,4-dinitrophenol (2,4-DNP) reached 97.3%, 98.03%, and 93.1%, respectively, with corresponding detection limits of 0.12, 0.04, and 0.008 μM. Mechanism research indicated that the fluorescence quenching effect was mainly attributed to the synergistic effect of resonance energy transfer and competitive absorption. In the detection of CEF in milk samples, the spiked recovery rates ranged from 99.52% to 102.31% with relative standard deviations (RSD) of 0.72%-1.78%. Regarding antibacterial performance, the diameters of inhibition zones against three common pathogenic bacteria (Shigella flexneri, Shigella dysenteriae, and Staphylococcus aureus) were 22.7, 16.5, and 15.6 mm, respectively. The antibacterial rate remained above 85% after 72 hours, which was mainly due to the sustained bactericidal effect of Ag⁺ through the dual pathways of "membrane damage-intracellular metabolic interference". The material developed in this study, integrating efficient fluorescent detection and long-lasting antibacterial functions, provides a novel solution for food safety monitoring.
- 17 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAg@Cd-MOF Composite Hydrogel: Preparation, Tri-Function Fluorescent Sensing, and Antibacterial Properties
In this study, Ag@Cd-MOF composite hydrogel was successfully constructed via reductive doping and free radical polymerization technology. Structural characterization confirmed that Ag@Cd-MOF particles were uniformly dispersed in the hydrogel network, and the crystal structure of Cd-MOF remained intact. For fluorescent performance, the emission intensity of the composite hydrogel at 333 nm was enhanced by 89.1% compared with pure Cd-MOF. The fluorescence quenching efficiencies for cefalexin (CEF), parathyroid hormone (PTH), and 2,4-dinitrophenol (2,4-DNP) reached 97.3%, 98.03%, and 93.1%, respectively, with corresponding detection limits of 0.12, 0.04, and 0.008 μM. Mechanism research indicated that the fluorescence quenching effect was mainly attributed to the synergistic effect of resonance energy transfer and competitive absorption. In the detection of CEF in milk samples, the spiked recovery rates ranged from 99.52% to 102.31% with relative standard deviations (RSD) of 0.72%-1.78%. Regarding antibacterial performance, the diameters of inhibition zones against three common pathogenic bacteria (Shigella flexneri, Shigella dysenteriae, and Staphylococcus aureus) were 22.7, 16.5, and 15.6 mm, respectively. The antibacterial rate remained above 85% after 72 hours, which was mainly due to the sustained bactericidal effect of Ag⁺ through the dual pathways of "membrane damage-intracellular metabolic interference". The material developed in this study, integrating efficient fluorescent detection and long-lasting antibacterial functions, provides a novel solution for food safety monitoring.
- Open Access
- 6 June 2026
- Published by Elsevier in SSRN Electronic Journal
Construction and Antibacterial Properties of Ag@Co-MOF Composite Hydrogel
A three-dimensional supramolecular coordination compound, [Co₂(opda)₂(btyp)₂(H₂O)₂] (Co-MOF) (where opda is o-phenylenediacetic acid and btyp is 3,5-bis(triazolyl)pyridin )was synthesized under hydrothermal conditions). Ag@Co-MOF was subsequently obtained via in situ doping. Based on this, a Ag@Co-MOF composite hydrogel was successfully fabricated through free-radical polymerization, exhibiting both excellent antibacterial activity and robust structural stability.The chemical structure, composition and micromorphology of Ag@Co-MOF composite hydrogels were systematically characterized by X-ray analysis, TEM, XRD, SEM, IR and BET tests. The results demonstrated that Ag@Co-MOF was successfully loaded into the hydrogel three-dimensional network, resulting in a uniformly porous composite hydrogel with a swelling capacity of 116% and a degradation rate of 75%. In terms of antibacterial properties, when the doping content of silver was 1.5 wt%, the diameters of inhibition zones against Shigella flexneri, Shigella dysenteriae and Staphylococcus aureus were 22.7 mm, 16.5 mm and 15.6 mm, respectively. The antibacterial rate remained above 85% even after 72 h, which was superior to those of pure hydrogel, Co-MOF modified hydrogel and single silver-doped hydrogel. The antibacterial mechanism was further explored. Silver nanoparticles in Ag@Co-MOF can be oxidized to release silver ions in hydrogel environment. Co-MOF carrier can regulate the release behavior of silver ions and generate synergistic effects with hydrogel network to achieve long-term and efficient antibacterial activity. Silver ions exert bactericidal effects via two pathways: they destroy bacterial cell membranes through electrostatic interaction, and inhibit intracellular enzyme activity and DNA replication, thus achieving persistent and excellent antibacterial efficacy.
- 6 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessConstruction and Antibacterial Properties of Ag@Co-MOF Composite Hydrogel
A three-dimensional supramolecular coordination compound, [Co₂(opda)₂(btyp)₂(H₂O)₂] (Co-MOF) (where opda is o-phenylenediacetic acid and btyp is 3,5-bis(triazolyl)pyridin )was synthesized under hydrothermal conditions). Ag@Co-MOF was subsequently obtained via in situ doping. Based on this, a Ag@Co-MOF composite hydrogel was successfully fabricated through free-radical polymerization, exhibiting both excellent antibacterial activity and robust structural stability.The chemical structure, composition and micromorphology of Ag@Co-MOF composite hydrogels were systematically characterized by X-ray analysis, TEM, XRD, SEM, IR and BET tests. The results demonstrated that Ag@Co-MOF was successfully loaded into the hydrogel three-dimensional network, resulting in a uniformly porous composite hydrogel with a swelling capacity of 116% and a degradation rate of 75%. In terms of antibacterial properties, when the doping content of silver was 1.5 wt%, the diameters of inhibition zones against Shigella flexneri, Shigella dysenteriae and Staphylococcus aureus were 22.7 mm, 16.5 mm and 15.6 mm, respectively. The antibacterial rate remained above 85% even after 72 h, which was superior to those of pure hydrogel, Co-MOF modified hydrogel and single silver-doped hydrogel. The antibacterial mechanism was further explored. Silver nanoparticles in Ag@Co-MOF can be oxidized to release silver ions in hydrogel environment. Co-MOF carrier can regulate the release behavior of silver ions and generate synergistic effects with hydrogel network to achieve long-term and efficient antibacterial activity. Silver ions exert bactericidal effects via two pathways: they destroy bacterial cell membranes through electrostatic interaction, and inhibit intracellular enzyme activity and DNA replication, thus achieving persistent and excellent antibacterial efficacy.
- 18 March 2026
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1366
Composite fluorescent films of two isomorphic Ln- MOFs for specific fluorescent sensing of tetracycline and Cr₂O₇²⁻
- 18 March 2026
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1366
Composite fluorescent films of two isomorphic Ln- MOFs for specific fluorescent sensing of tetracycline and Cr₂O₇²⁻
- 11 March 2026
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1364
A stable dual-emissive Eu/Tb-MOF fluorescent probe for selective sensing of tetracycline, Fe3+ and cysteine
- 11 March 2026
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1364
A stable dual-emissive Eu/Tb-MOF fluorescent probe for selective sensing of tetracycline, Fe3+ and cysteine
- 25 November 2025
- Published by Springer Nature in Microchimica Acta
- Vol. 192 (12) , 851
Preparation of four lanthanide metal-organic framework-based film fluorescence sensors and detection of metal ions, aspartic acid and tetracycline
Four lanthanide metal-organic frameworks (Ln-MOFs) with the same planar structure were successfully synthesized via the hydrothermal method:{DyL (H₂O)₃·5H₂O}ₙ (1), {HoL(H₂O)₃·5H₂O}ₙ (2),{ErL(H₂O)₃·5H₂O}ₙ (3), and {TmL (H₂O)₃·6H₂O}ₙ (4), where H₃L = 2,4,6-biphenyl tricarboxylic acid. All four Ln-MOFs crystallize in the triclinic P-1 space group, exhibiting high phase purity, excellent thermal stability, and favorable luminescence properties. The Ln-MOFs powders were subsequently shaped into composite fluorescent films using a polymer embedding method for the sensing and detection of Fe3+, Cr2O72−, aspartic acid (Asp), and tetracycline (Tcn) in aqueous solutions. It was found that 1@PMMA, 2@PMMA, and 4@PMMA exhibited significant recognition ability for Asp, with no notable differences among them. All three films could serve as fluorescence sensing probes for Asp. In contrast, 3@PMMA showed no distinct recognition ability for Asp. For the detection of Tcn, Fe³⁺, and Cr₂O₇²⁻, all four films performed comparably and can serve as specific fluorescent sensors for these analytes. Compared with powdered MOFs, these films are not only highly efficient, stable and recyclable but also portable and easy to operate. This device fabrication strategy lays the fundament for the application of the reported metal-organic frameworks in diverse areas such as environmental protection, pollution control, material innovation, and public health. Graphical Abstract
- 25 November 2025
- Published by Springer Nature in Microchimica Acta
- Vol. 192 (12) , 851
Preparation of four lanthanide metal-organic framework-based film fluorescence sensors and detection of metal ions, aspartic acid and tetracycline
Four lanthanide metal-organic frameworks (Ln-MOFs) with the same planar structure were successfully synthesized via the hydrothermal method:{DyL (H₂O)₃·5H₂O}ₙ (1), {HoL(H₂O)₃·5H₂O}ₙ (2),{ErL(H₂O)₃·5H₂O}ₙ (3), and {TmL (H₂O)₃·6H₂O}ₙ (4), where H₃L = 2,4,6-biphenyl tricarboxylic acid. All four Ln-MOFs crystallize in the triclinic P-1 space group, exhibiting high phase purity, excellent thermal stability, and favorable luminescence properties. The Ln-MOFs powders were subsequently shaped into composite fluorescent films using a polymer embedding method for the sensing and detection of Fe3+, Cr2O72−, aspartic acid (Asp), and tetracycline (Tcn) in aqueous solutions. It was found that 1@PMMA, 2@PMMA, and 4@PMMA exhibited significant recognition ability for Asp, with no notable differences among them. All three films could serve as fluorescence sensing probes for Asp. In contrast, 3@PMMA showed no distinct recognition ability for Asp. For the detection of Tcn, Fe³⁺, and Cr₂O₇²⁻, all four films performed comparably and can serve as specific fluorescent sensors for these analytes. Compared with powdered MOFs, these films are not only highly efficient, stable and recyclable but also portable and easy to operate. This device fabrication strategy lays the fundament for the application of the reported metal-organic frameworks in diverse areas such as environmental protection, pollution control, material innovation, and public health. Graphical Abstract
- 4 September 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1349
Structural effect of two Eu-based coordination polymers on fluorescence sensing for antibiotics
- 4 September 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1349
Structural effect of two Eu-based coordination polymers on fluorescence sensing for antibiotics