SESeyyedmilad Ebrahimi

Seyyedmilad Ebrahimi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Seyyedmilad Ebrahimi has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Admittance-Based Aggregated Modeling of Distributed Energy Resources With Proportional-Resonant Control for Large-Signal Transient Analysis in Nodal-Based EMT Simulators

    by Arash Safavizadeh, Rahul Raman Ramesh, Seyyedmilad Ebrahimi, Juri Jatskevich

    Distributed energy resources are increasingly integrated into power systems via power electronic converters, creating the need for more efficient electromagnetic transient (EMT) simulations. This paper proposes a direct interfacing method for admittance-based aggregated models (ABAMs) of grid-following converter-interfaced resources (CIRs) with proportional-resonant (PR) control, aiming to enhance the efficiency of large-signal transient simulations in nodal-based EMT programs. The transfer-function-based Norton models are first developed for CIRs with heterogeneous parameters/ratings that are diversely distributed across the power grid. Then, Norton/Thévenin transformations are applied to combine them with collector lines and the impedance/admittance-based models of system components, such as loads. The aggregated transfer functions, represented as a Norton equivalent, are discretized and integrated into the overall network nodal equations to enable simultaneous solution. The proposed directly interfaced ABAM (DI-ABAM) uses a constant-conductance matrix, reducing computational cost and enabling the use of large simulation time-step sizes while maintaining high accuracy. The benefits of the proposed DI-ABAM are demonstrated through transient simulations in both offline (PSCAD) and real-time (RTDS) simulators.

  • Open Access

    Numerically Enhanced Interfacings for Average-Value Models of Voltage-Source Converters in Nodal-Based EMT Simulators

    by Seyyedmilad Ebrahimi, Juri Jatskevich

    Efficient simulations of converter-dominated power systems and microgrids significantly rely on average-value models (AVMs) of the converters. The conventional AVMs of voltage-source converters (VSCs) typically require a time-step delay for interfacing with the external circuits in non-iterative nodal-based electromagnetic transient (EMT) programs. This time-step relaxation may lead to numerical inaccuracy and/or instability for simulations with large time-step sizes. This paper presents several alternative formulations and interfacing techniques for AVMs of VSCs, which eliminate undesirable time-step delays and result in robust and reliable interfaces that allow simulations at large time steps without significant compromise in numerical accuracy. This is achieved by formulating the VSCs as conductance matrices (and history terms), which are computed simultaneously with the solution of the external network. The advantages of the proposed techniques over the conventional methods are demonstrated in simulations of a VSC-dominated power system using the EMT program PSCAD.


  • Extended Operation of Brushless DC Motors Beyond 120° Under Torque Ripple Reduction Control

    by Ziliang Feng, Ekamjot Singh Tahim, Jiahao Zhang, Rahul Raman Ramesh, Abhay Kaushik, Seyyedmilad Ebrahimi, Juri Jatskevich

    Hall-sensor-based brushless dc (BLDC) motors are extensively utilized in many applications due to their simple manufacturing and straightforward control. The conventional commutation method uses the 120° commutation logic, which can be directly derived from the Hall signals. The advantage of this method is that it naturally approximates the maximum torque per Ampere (MTPA) operation, but the high torque ripple and low dc voltage utilization are undesirable features. Many algorithms have been proposed in the literature to minimize the torque ripple during the conduction and commutation intervals. This paper proposes a new torque control strategy that can continuously extend the operation from 120° to 180° and maintain the torque ripple reduction during both conduction and commutation intervals by dynamically adjusting the duty cycle based on the reference torque, the estimated torque, and the derivative of torque. The proposed method reduces the torque ripple during the commutation interval, even in high-speed operation, by increasing the conduction angle. The proposed method is analyzed under different speed and back EMF shapes, and its effectiveness is demonstrated experimentally on a typical industrial BLDC motor.


  • Torque Ripple Reduction in Brushless DC Motors with 180° Commutation

    by Ziliang Feng, Rahul Raman Ramesh, Ekamjot Singh Tahim, Jiahao Zhang, Seyyedmilad Ebrahimi, Juri Jatskevich

    Hall-sensor-based brushless DC (BLDC) motors are utilized extensively in low-cost applications due to their manufacturing simplicity and ease of control. Often, BLDC motors are controlled using the 120° commutation logic, which naturally approximates the maximum torque per ampere (MTPA) operation. However, in some applications, the 180° commutation is preferred since it allows higher DC voltage utilization and continuous phase currents, although it comes at the cost of higher torque ripple. This paper proposes a new torque control strategy to reduce the torque ripple in the 180°-commutated BLDC motors. The proposed method dynamically adjusts the duty cycle within each switching interval based on the reference, the estimated electromagnetic torque, and the derivative of the torque. The proposed method is analyzed under different speeds and back EMF shapes, and its effectiveness is validated through simulation and experimental results on a typical industrial BLDC motor.


  • Open Access

    Discretized Impedance-Based Modeling of Converter-Interfaced Energy Resources for State-Variable-Based Real-Time EMT Simulators

    by Taleb Vahabzadeh, Seyyedmilad Ebrahimi, Juri Jatskevich

    Modern power systems are experiencing high penetration of voltage-source converter (VSC)-interfaced distributed energy resources and loads. Design, analysis, and reliable operation of such systems require extensive offline and real-time electromagnetic transient (EMT) simulations. This paper proposes discretized impedance-based modeling (DIBM) of VSCs for efficient time-domain transient analysis in state-variable (SV)-based EMT simulators. Specifically, the VSC-based systems are first represented as admittance-based models in the Laplace domain, and then they are discretized and formulated to construct a Thévenin equivalent impedance matrix and history voltages that can be interfaced seamlessly with external systems in SV-based simulators. By replacing VSC subsystems with Thévenin equivalent circuits, the proposed DIBM technique significantly reduces the number of states and eliminates the need for fictitious snubbers that may be needed in SV-based EMT simulators for compatible interfacing. The effectiveness of the proposed DIBM approach over the conventional method that uses average value models of VSCs is demonstrated on a seven-bus VSC-based system in offline (MATLAB Simscape Electrical) and real-time (OPAL-RT) EMT simulators. It is verified that the proposed method enables high accuracy and larger simulation time steps while also significantly improving the overall computational performance.


  • Open Access

    Numerical Recursive Aggregation of VSC-Based Systems Using Impedance Modeling for Stability Analysis

    by Taleb Vahabzadeh, Seyyedmilad Ebrahimi, Juri Jatskevich

    The high penetration of voltage-source converter (VSC)-based resources poses stability challenges to modern power systems due to introducing new dynamics with broad time-scale and frequency-coupling. The so-called impedance-based modeling (IBM) is widely used for the dynamic characterization and stability analysis of grid-connected VSCs. In this paper, it is first shown that using IBM, the analytical aggregation of interconnected VSC-based systems results in very high-order transfer matrices, which are not conducive to stability analysis. As an alternative, a numerical recursive aggregation technique is proposed for interconnected VSC-based power systems. Using the proposed method, the individual MIMO transfer matrices of the IBM of VSCs can be readily used for aggregation across a range of discrete frequencies. Moreover, an algorithm is proposed to automate the aggregation of multi-converter-based systems. The proposed technique is illustrated on a VSC-based power system with multiple converters considering the interconnecting line impedances. The time-domain simulations and frequency analysis verify the accuracy and effectiveness of the proposed method, demonstrating that it is over 990 times computationally more efficient than the small-signal injection method for calculating the aggregated load admittance while also offering almost 80 times higher frequency resolution.


  • Open Access

    Constant-Parameter Average-Value Model of Power-Electronic Voltage-Source Converters With Direct Interface in Electromagnetic Transient Simulators

    by Seyyedmilad Ebrahimi, Taleb Vahabzadeh, Juri Jatskevich

    Average-value models (AVMs) of voltage-source converters (VSCs) are widely used as numerically efficient alternatives to their discrete switching models in electromagnetic transient (EMT) simulations. Recently, a so-called directly-interfaced AVM (DI-AVM) has been developed for VSCs, permitting large simulation time steps favorable for system-level offline and/or real-time studies. Although enabling large step sizes, the conductance/resistance matrix of the DI-AVM is time-varying and needs to be calculated at every simulation time step, which requires additional computational resources. This paper proposes a constant-parameter DI-AVM (CP-DI-AVM) for more efficient simulations of VSC-based power-electronic systems that does not require re-calculation of the network conductance matrix in EMT simulators. This is achieved by using a numerical approximation that only slightly reduces the solution accuracy. The performance of the proposed CP-DI-AVM is demonstrated on a large-scale VSC-based energy conversion system implemented in PSCAD/EMTDC. The proposed CP-DI-AVM is shown to have numerical advantages over the prior DI-AVM and the conventional AVMs of VSCs.


  • Wide-Band Constant-Parameter Voltage-Behind- Reactance Model of Squirrel-Cage Induction Machines

    by Sheraz Baig, Seyyedmilad Ebrahimi, Juri Jatskevich, Liwei Wang, Aria Fani

    Variable frequency drives are widely utilized in many commercial and industrial applications. Therein, typically, a three-phase squirrel-cage induction machine (IM) is fed from an inverter through a cable. To design and tune such systems, various models of IMs have been proposed in the literature to study the motor-converter interactions and the low-to-high frequency phenomena. This paper presents a wide-band model for the IMs that is valid in the frequency range from DC to ten MHz. The new model is obtained by incorporating the low-mid frequency voltage-behind-reactance model with the universal high-frequency stator and bearing circuit models. The performance of the proposed model is demonstrated using computer simulations and experimental results obtained from a 7.5 hp induction motor connected to a drive system through a cable. The new model is demonstrated to accurately predict the common mode (CM) and differential mode (DM) impedances, reflected transient over-voltages, CM currents, and bearing voltages, all representing an advantage over the conventional/existing IM models.


  • Admittance-Based Aggregated Modeling of Converter-Interfaced Resources With Heterogeneous Parameters for Transient Analysis of Multiconverter Systems

    by Arash Safavizadeh, Taleb Vahabzadeh, Seyyedmilad Ebrahimi, Juri Jatskevich

    Aggregated modeling of converter-interfaced resources (CIRs) can decrease the computational complexity in time-domain simulations of electric grids with high penetration of renewable sources. This paper presents admittance-based aggregated modeling (ABAM) for grid-following CIRs. The aggregation is carried out by representing the CIRs' current controllers and output filters using transfer functions and aggregating them as admittances and sources. For improved aggregation accuracy, the CIRs are grouped in terms of their ratings, synchronization system parameters, and collector system parameters. The numerical advancements of the proposed ABAM are shown in an example renewable energy system consisting of multiple grid-following CIRs. It is verified that the ABAM has low sensitivity to the parameters and excellent accuracy in capturing the dynamics of heterogeneous CIRs compared to the conventional preserved-structure aggregated model with weighted-mean parameters. The proposed ABAM also permits the use of large time-step sizes with acceptable numerical accuracy in (offline) MATLAB/Simulink and (real-time) OPAL-RT simulators.


  • Admittance-Based Modeling for Electromagnetic Transient and Stability Analysis of Power-Electronic-Based Energy Conversion Systems

    by Taleb Vahabzadeh, Arash Safavizadeh, Seyyedmilad Ebrahimi, Juri Jatskevich

    Efficient and accurate simulation tools are crucial for studying the dynamics and stability of modern power systems with high penetration of voltage-source converters (VSCs). This paper proposes an admittance-based electromagnetic transient program (ABM-EMTP) approach for analyzing large-scale VSC-based energy conversion systems. Compared to the traditional EMTP approach with a detailed representation of all switches or the use of average-value models for the VSCs, the proposed approach applies impedance-based modeling to the VSC-based resources, which reduces the effective network to be simulated and the size of the overall nodal equation. An additional benefit is that the constructed admittances may be used for the small-signal stability analysis conducted within the EMTP environment. The benefits of the proposed approach over the conventional method that uses AVMs of VSCs are demonstrated on a VSC-based energy conversion system in the offline (PSCAD) and real-time (RTDS) transient simulations. It is verified that the proposed ABM-EMTP method enables high accuracy with larger simulation time steps, significantly improving the simulations’ overall computational performance. It is also shown that the small-signal stability of the system can be accurately assessed using the developed ABMs, including the frequency-coupling dynamics and oscillations.