MBMartin Boll

Martin Boll

*This is an algorithmically generated author record based on publicly available information.

Martin Boll has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Analysis and Optimization of Technical and Weight Parameters of Turbo-Electric Propulsion Systems

    by Mykhaylo Filipenko, Stefan Biser, Martin Boll, Matthias Corduan, Mathias Noe, Peter Rostek

    According to Flightpath 2050, the aviation industry is aiming to substantially reduce emissions over the coming decades. One possible solution to meet these ambitious goals is by moving to hybrid-electric drivetrain architectures which require the electric components to be extremely lightweight and efficient at the same time. It has been claimed in several publications that cryogenic and in particular superconducting components can help to fulfill such requirements that potentially cannot be achieved with non-cryogenic components. The purpose of this work was to make a fair comparison between a cryogenic turbo-electric propulsion system (CEPS) and a non-cryogenic turbo-electric propulsion system (TEPS) on a quantitative level. The results on the CEPS were presented in detail in a previous publication. The focus of this publication is to present the study on the TEPS, which in conclusion allows a direct comparison. For both systems the same top-level aircraft requirements were used that were derived within the project TELOS based on an exemplary mission profile and the physical measures of a 220-passenger aircraft. Our study concludes that a CEPS could be 10% to 40% lighter than a TEPS. Furthermore, a CEPS could have a total efficiency gain of up to 18% compared to a similar TEPS.


  • Open Access

    A holistic system approach for short range passenger aircraft with cryogenic propulsion system

    by Martin Boll, Matthias Corduan, Stefan Biser, Mykhaylo Filipenko, Quoc Huang Pham, Sonja Schlachter, Peter Rostek, Mathias Noe

    Currently, hybrid-electric aircraft are under investigation as one possible solution to reduce the emissions of the aviation industry according to Flightpath 2050 of the European Union. To meet the drive train's requirements on low mass while aiming for highest efficiency, superconducting technologies are regarded as a key enabling technology for drive train powers of several tens of megawatts. Within the German nationally funded project TELOS an exemplary mission profile and the physical measures of a 220-passenger aircraft are used to derive the requirements for a cryogenic-cooled serial hybrid-electric propulsion system. To optimize the total system performance, we subsequently evaluated the superconducting and cryogenic-cooled components by using computationally fast, analytical models. This approach allows quantifying the system performance by using component technologies being available today. In particular, the system performance of geared drive to direct drive propulsion units are compared and the influence of the DC bus voltage and the electric frequencies of the AC circuits on the mass and the efficiency of the drive trains are analysed.


  • Topology Comparison of Superconducting AC Machines for Hybrid Electric Aircraft

    by Matthias Corduan, Martin Boll, Roman Bause, Marijn P. Oomen, Mykhaylo Filipenko, Mathias Noe

    Electric machines with very high power-to-weight ratios are inevitable for hybrid-electric aircraft applications. One potential technology that is very promising to achieve the required power-to-weight ratio for short-range aircraft, are superconductors used for high current densities in the stator or high magnetic fields in the rotor. In this work, an in-depth analysis of potential fully and partially superconducting machines is performed, taking into account all relevant physical domains such as electromagnetics, superconducting properties, thermal behavior as well as structural mechanics. For the requirements of the motors in the NASA N3-X concept aircraft, we find that fully superconducting machines could achieve 3.5 times higher power-to-weight ratio than partially superconducting machines. Furthermore, the model can be used to calculate the relevant key performance indicators such as mass, efficiency and cryogenic cooling requirements for any other machine design.


  • Open Access

    Composite stacks for reliable > 17 T trapped fields in bulk superconductor magnets

    by Kai Yuan Huang, Yunhua Shi, Jan Srpčič, Mark D Ainslie, Devendra Kumar Namburi, Anthony R Dennis, Difan Zhou, Martin Boll, Mykhaylo Filipenko, Jan Jaroszynski, et al.

    Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and, secondly, catastrophic thermal instabilities as a result of flux movement during magnetization. Moreover, for a batch of samples nominally fabricated identically, the statistical nature of the failure mechanism means the best performance (i.e. trapped fields of over 17 T) cannot be attained reliably. The magnetization process, particularly to higher fields, also often damages the samples such that they cannot repeatedly trap high fields following subsequent magnetization. In this study, we report the sequential trapping of magnetic fields of ∼ 17 T, achieving 16.8 T at 26 K initially and 17.6 T at 22.5 K subsequently, in a stack of two Ag-doped GdBa2Cu3O7-δ bulk superconductor composites of diameter 24 mm reinforced with (1) stainless-steel laminations, and (2) shrink-fit stainless steel rings. A trapped field of 17.6 T is, in fact, comparable with the highest trapped fields reported to date for bulk superconducting magnets of any mechanical and chemical composition, and this was achieved using the first composite stack to be fabricated by this technique. These post-melt-processing treatments, which are relatively straightforward to implement, were used to improve both the mechanical properties and the thermal stability of the resultant composite structure, providing what we believe is a promising route to achieving reliably fields of over 20 T.


  • Open Access

    Flux vortex dynamics in type-II superconductors

    by J Srpčič, D A Moseley, F Perez, K Y Huang, Y Shi, A R Dennis, M D Ainslie, A M Campbell, M Boll, D A Cardwell, et al.

    The flux-pinning landscape in type-II superconductors determines the response of the flux line lattice to changing magnetic fields. Typically, the flux vortex behaviour is hysteretic and well described within the framework of the Bean critical-state model and its extensions. However, if the changing magnetic field does not move the flux vortices from their pinning sites, their response remains linear and reversible. The vortex displacement, then, is characterised by the Campbell penetration depth, which itself is related directly to the effective size of the pinning potential. Here, we present measurements of the Campbell penetration depth (and the effective size of the pinning potential) as a function of magnetic field in a single-grain bulk GdBa2Cu3O 7 − δ superconductor using a pick-up coil method. Hence, the hysteretic losses, which take into account the reversible vortex movement, are established.


  • Open Access

    Predesign Considerations for the DC Link Voltage Level of the CENTRELINE Fuselage Fan Drive Unit

    by Stefan Biser, Guido Wortmann, Swen Ruppert, Mykhaylo Filipenko, Mathias Noe, Martin Boll

    Electric propulsion (EP) systems offer considerably more degrees of freedom (DOFs) within the design process of aircraft compared to conventional aircraft engines. This requires large, computationally expensive design space explorations (DSE) with coupled models of the single components to incorporate interdependencies during optimization. The purpose of this paper is to exemplarily study these interdependencies of system key performance parameters (KPIs), e.g., system mass and efficiency, for a varying DC link voltage level of the power transmission system considering the example of the propulsion system of the CENTRELINE project, including an electric motor, a DC/AC inverter, and the DC power transmission cables. Each component is described by a physically derived, analytical model linking specific subdomains, e.g., electromagnetics, structural mechanics and thermal analysis, which are used for a coupled system model. This approach strongly enhances model accuracy and simultaneously keeps the computational effort at a low level. The results of the DSE reveal that the system KPIs improve for higher DC link voltage despite slightly inferior performance of motor and inverter as the mass of the DC power transmission cable has a major share for a an aircraft of the size as in the CENTRELINE project. Modeling of further components and implementation of optimization strategies will be part of future work.


  • Open Access

    Penetration depth of shielding currents due to crossed magnetic fields in bulk (RE)-Ba-Cu-O superconductors

    by J Srpčič, F Perez, K Y Huang, Y Shi, M D Ainslie, A R Dennis, M Filipenko, M Boll, D A Cardwell, J H Durrell


  • Open Access

    Exploiting flux jumps for pulsed field magnetisation

    by Difan Zhou, Mark D Ainslie, Jan Srpčič, Kaiyuan Huang, Yunhua Shi, Anthony R Dennis, David A Cardwell, John Hay Durrell, Martin Boll, Mykhaylo Filipenko


  • Demagnetization Study of Pulse-Field Magnetized Bulk Superconductors

    by J. Srpcic, D. Zhou, K. Y. Huang, Y. Shi, A. Dennis, M. D. Ainslie, A. M. Campbell, R. Bause, M. Boll, M. Filipenko, et al.

    GdBa 2 Cu 3 O 7-δ bulk superconductors are a route to higher magnetic fields in rotating machines. Here, we examine the resistance of pulse-field magnetized bulks to the demagnetization fields they may experience in such a system. The bulks were magnetized at 77 K, after which several thousand cycles of AC field were applied. Subsequently, the decay of the trapped field was characterized. We found that the decay per cycle decreases with frequency and is, normalized to the initial trapped field, largest at the edge of the bulk. At 77 K, the reduction in trapped field proved significant (25% in the center for 150 mT (peak) AC field at 6 Hz), however, reducing below 1% when lowering the temperature to 60 K. We explain this observation as being due to increased flux pinning strength at low temperatures. When applying an AC field, we found a temperature rise that increased with applied field amplitude and frequency. However, when applying an AC field of amplitude 45 mT with a frequency of 48 Hz, we found an increase of the bulk temperature of only 100 mK. Therefore, we conclude that the temperature rise within the analyzed AC field frequency and amplitude range does not contribute significantly to the decay of trapped field.


  • Revealing hidden antiferromagnetic correlations in doped Hubbard chains via string correlators

    by Timon A. Hilker, Guillaume Salomon, Fabian Grusdt, Ahmed Omran, Martin Boll, Eugene Demler, Immanuel Bloch, Christian Gross

    Spin-charge separation in atomic chains: Strongly interacting electrons lined up along a string can experience the so-called spin-charge separation, where the electrons “split” into effective carriers of spin and charge, which then move independently. This phenomenon has been observed, somewhat indirectly, in solids. Hilker et al. show spin-charge separation in a direct way by using a one-dimensional (1D) array of cold atoms, playing the role of electrons, whose degrees of freedom of spin and charge can be monitored using a fermionic quantum gas microscope. Empty sites in the 1D lattice moved freely without disturbing the underlying antiferromagnetic order. Science , this issue p. 484