ECEmma Louise Chambers

Emma Louise Chambers

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Emma Louise Chambers has a total of 170 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigating geothermal potential with limited direct measurements

    by Emma L. Chambers, Javier Fullea, Duygu Kiyan, Bernard Owusu, Christopher J. Bean

    Understanding the whole system from the mantle to the surface is required to produce accurate subsurface models for geothermal resource assessment, resource exploration, hazard assessment and the understanding of tectonic processes. Variations in lithology and the associated thermal parameters will influence the subsurface thermal structure, which is one of the key parameters for geothermal exploration. This information can be difficult to obtain in areas with limited deep boreholes that directly sample subsurface lithology and physical properties (e.g. temperature). Furthermore, subsurface temperature signals are intertwined with other variables, requiring approaches to separate the individual contributions within overlapping datasets. One way to achieve this is by utilising complementary datasets such as laterally continuous geophysical datasets (primarily passive seismic), thermal conductivity and heat production, and inverting directly for subsurface temperature with a joint geophysical-petrological inversion.We use Ireland to test the methodology within the crust and lithospheric mantle, both for the full island and local scale. Ireland has 32 deep (>1 km) boreholes, which are unevenly distributed across the island and have variable quality temperature measurements. In contrast, Ireland has abundant indirect geophysical measurements from seismic, magnetotelluric and gravity data. The output from the inversion includes the lithospheric geotherm, lithospheric thickness and Moho depth, as well as crustal structure parameters such as seismic velocity, density and radiogenic heat production. The resulting temperature models agree well with the existing borehole temperature data and provide information for areas with fewer direct measurements. In addition, the inversion outputs offer insights into the lithological and compositional variations within the crust. We further develop the workflow by incrporating lithological boundaries from detailed 3D subsurface models.

  • Open Access

    Multi-scale Imaging of Iceland using Ambient Noise and Teleseismic Earthquakes

    by Bernard Asare Owusu, Emma L. Chambers, Christopher J. Bean, Kristín Jónsdóttir

    Iceland is one the most active tectonic regions in the world. While previous seismic tomographic models have provided insights into subsurface structure, rifting and the presence of a mantle plume and melt, these models have lacked the multi-scale resolution to connect the near surface and crustal structure to the mantle. In order to advance our understanding on the lithospheric structure and how it relates to geothermal activity we require a high resolution full lithosphere model of Iceland. Using recently acquired passive seismic data, we are constructing a new surface wave velocity model of Iceland by combining ambient noise and teleseismic earthquake data derived from phase velocity dispersion. We use a database of 205 seismic stations from a variety of permanent and temporary networks recorded between 1993 and 2024. We obtain Rayleigh and Love phase velocity dispersion curves from the cross correlograms using SeisLib (Magrini et al., 2022). For teleseismic earthquakes, we measure phase variation between nearby stations using a waveform cross-correlation method. We perform strict quality control to ensure that the dispersion measurements are robust since the instruments used are of different sensitivities, affecting the dispersion measurements at longer periods. The dispersion curves and phase variations are inverted for phase velocity maps between 4 – 100 seconds period. We observe low velocity in the upper and mid crust around the Western Volcanic Zone (WVZ), Eastern Volcanic Zone (EVZ) and Northern Volcanic Zone (NVZ) following closely with the rifts in Einarsson et al. (2006), and significantly lower velocity around the western edge of the Vatnajökull icecap. We also observe low velocity in central Iceland in the lower crust and upper mantle. We invert the phase velocity maps for shear velocity models of the lithosphere. This new model will contribute to providing high resolution imaging of the Icelandic lithosphere from the crust to mantle. We will in future jointly invert the velocity model with petrological data to model the geothermal structure of Iceland with a local focus at the Krafla volcanic complex.

  • Open Access

    The UK and Ireland Geophysical Array -- Concept and Design

    by Andrew Curtis, Karen Lythgoe, Stephen P. Hicks, Lidong Bie, Dominik Strutz, Emma Chambers, Brian Baptie, Dave Cornwell, Juliane Huebert, Jessica Irving, et al.

    Scientific exploration of the UK and Ireland's subsurface has made important contributions to scholarship and prosperity for people and the planet, including economic growth, sustainable use of natural resources, storage of greenhouse gases, and inspiring curiosity about the Earth beneath our feet. This article outlines a vision for an array of seismological instruments spanning the UK and Ireland, UKI Array, augmented by other types of geophysical sensors, to maximise the value offered by existing equipment pools. The mission is to research natural phenomena and structure in the deep and shallow Earth, to solve problems concerning hazards and resources, to connect scientists to schools and the broader public, and thus to inspire a new generation to learn about geophysics. The vision was created through a community driven process of engagement and participation. This paper describes the concept and design of the UKI-Array; a companion paper discusses related opportunities and potential applications.

  • Open Access

    Changing volatile emissions and sources along the Ethiopian Rift

    by Abate A. Melaku, Gemechu B. Teferi, Takele Mihretie, Snorri Gudbrandsson, Yared Sinetebeb, Peter H. Barry, Tobias P. Fischer, Finlay M. Stuart, Ugur Balci, Sæmundur A. Halldórsson, et al.


  • Open Access

    A new subsurface temperature model for Ireland from joint geophysical–petrological inversion of seismic, surface heat flow and petrophysical data

    by Emma Louise Chambers, Javier Fullea, Duygu Kiyan, Sergei Lebedev, Christopher J. Bean, Pat Meere, Stephen Daly, Nicola Willmot Noller, Robert Raine, Sarah Blake, et al.

    High-quality maps of subsurface temperature and the geothermal gradient are useful when assessing the geothermal potential of a region. However, determining geothermal potential is a challenge when direct measurements of in-situ temperature and thermal property information are sparse and indirect geophysical methods are sensitive to a range of parameters, not just temperature. Here, we produce subsurface temperature maps of Ireland using a joint geophysical–petrological inversion, where seismic and other geophysical and petrophysical data are inverted directly for temperature in 1-D columns and are collated into a pseudo 3-D temperature volume. Additionally, the inversion produces new models for Moho and LAB depth and for the average crustal radiogenic heat production. To assess the robustness of the resulting temperature model, an uncertainty analysis has been performed by inverting all of the 1-D columns for a range of reasonable input parameters applicable to the Irish crust (rather than the ‘best’ input parameters). The resulting uncertainty model suggests temperature estimates at 2 km depth in our model could vary by ± 2 to 5 °C with an average of 3.5 °C in most locations. The uncertainty model can be used to assess confidence in different regions of the temperature model. In addition, 3-D forward modelling was performed to assess the lateral heat flow variations when compared to the purely 1-D inversion. The upper-crustal geothermal gradient ranges from 20 to 40 °C km−1 indicating a higher geothermal gradient for Ireland than previously reported with subsurface temperatures at 2 km depth > 60 °C everywhere, sufficient for residential and industrial heating purposes. The temperature gradient is typically higher in areas with thinner lithosphere. However, in some locations, the observed geotherms are elevated further due to high radiogenic heat production in granitic rocks. In Northern Ireland, a thin lithosphere, coupled with a weakly conductive basalt layer overlying warm crust, results in elevated temperatures. These are the first temperature maps for Ireland that include uncertainty estimates, providing ranges for the subsurface temperature values, and demonstrate that the maps are comparable to direct independent borehole temperature measurements, which are observed to fall within the model uncertainty. Our new methodology provides workflows for determining the geothermal potential in areas with limited direct temperature measurements. The final temperature model with uncertainty provides useful constraints for geothermal exploration and utilization on the island of Ireland.


  • Open Access

    A new subsurface temperature model for Ireland from joint geophysical–petrological inversion of seismic, surface heat flow and petrophysical data

    by Emma L Chambers, Javier Fullea, Duygu Kiyan, Sergei Lebedev, Christopher J Bean, Patrick A Meere, J Stephen Daly, Nicola Willmot Noller, Robert Raine, Sarah Blake, et al.

    SUMMARY: High-quality maps of subsurface temperature and the geothermal gradient are useful when assessing the geothermal potential of a region. However, determining geothermal potential is a challenge when direct measurements of in-situ temperature and thermal property information are sparse and indirect geophysical methods are sensitive to a range of parameters, not just temperature. Here, we produce subsurface temperature maps of Ireland using a joint geophysical–petrological inversion, where seismic and other geophysical and petrophysical data are inverted directly for temperature in 1-D columns and are collated into a pseudo 3-D temperature volume. Additionally, the inversion produces new models for Moho and LAB depth and for the average crustal radiogenic heat production. To assess the robustness of the resulting temperature model, an uncertainty analysis has been performed by inverting all of the 1-D columns for a range of reasonable input parameters applicable to the Irish crust (rather than the ‘best’ input parameters). The resulting uncertainty model suggests temperature estimates at 2 km depth in our model could vary by ± 2 to 5 °C with an average of 3.5 °C in most locations. The uncertainty model can be used to assess confidence in different regions of the temperature model. In addition, 3-D forward modelling was performed to assess the lateral heat flow variations when compared to the purely 1-D inversion. The upper-crustal geothermal gradient ranges from 20 to 40 °C km−1 indicating a higher geothermal gradient for Ireland than previously reported with subsurface temperatures at 2 km depth > 60 °C everywhere, sufficient for residential and industrial heating purposes. The temperature gradient is typically higher in areas with thinner lithosphere. However, in some locations, the observed geotherms are elevated further due to high radiogenic heat production in granitic rocks. In Northern Ireland, a thin lithosphere, coupled with a weakly conductive basalt layer overlying warm crust, results in elevated temperatures. These are the first temperature maps for Ireland that include uncertainty estimates, providing ranges for the subsurface temperature values, and demonstrate that the maps are comparable to direct independent borehole temperature measurements, which are observed to fall within the model uncertainty. Our new methodology provides workflows for determining the geothermal potential in areas with limited direct temperature measurements. The final temperature model with uncertainty provides useful constraints for geothermal exploration and utilization on the island of Ireland.


  • Open Access

    Mantle upwelling at Afar triple junction shaped by overriding plate dynamics

    by Emma J. Watts, Rhiannon Rees, Philip Jonathan, Derek Keir, Rex N. Taylor, Melanie Siegburg, Emma L. Chambers, Carolina Pagli, Matthew J. Cooper, Agnes Michalik, et al.

    Mantle upwellings drive large-scale surface volcanism and facilitate continental breakup and ocean basin formation. However, the spatial characteristics and internal composition of these upwellings alongside how they are modified by plate tectonics are poorly resolved. Afar, East Africa, is a classic triple junction comprising three rifts at various stages of evolution thought to be underlain by a mantle upwelling or plume, allowing examination of the controls on the mantle upwelling. Here we present geochemical data from >130 samples of ‘young’ volcanoes spanning the rifts defining the triple junction to show that the underlying mantle comprises a single, asymmetric upwelling. Using statistical modelling to integrate our data with existing geochemical and geophysical constraints, we suggest that Afar is fed by a spatially and chemically heterogeneous upwelling, which controls the composition and relative abundance of melt in all three rift arms. We identify repetitive signatures in mantle compositions in rift regions, whose variability is a longer wavelength in faster-extending rift arms. This suggests more rapid channelized mantle flow occurs where rifting rates are higher and the plate is thinner, aiding flow of the upwelling towards the faster-spreading Red Sea Rift. Our findings demonstrate how the evolution of mantle upwellings is influenced by the dynamics of overriding plates.


  • Open Access

    Joint geophysical-petrological-lithological inversion to determine geothermal potential and subsurface temperature

    by Emma Chambers, Bernard Owusu, Javier Fullea, Duygu Kiyan, Robert Raine, Sarah Blake, Christopher Bean

    High-quality maps of the geothermal gradient are essential when assessing the geothermal potential of a region. However, determining geothermal potential is a challenge in regions where direct measurements of in situ temperature and thermal property information are sparse (e.g. Ireland). Significant risk reduction is required to understand the heat resources before they can be fully exploited. Furthermore, individual geophysical methods are sensitive to a range of parameters, not solely temperature.We determine the geothermal gradient by inverting seismic, in addition to other geophysical, lithological and petrophysical input datasets, directly for temperature. The temperature maps obtained for Ireland so far are within error of direct borehole temperature measurements, providing confidence in the results (Chambers et al. EarthArXiv 2024 and in review). We further develop the joint geophysical-petrological thermochemical workflow used by introducing lithology and transient thermal effects to the inversion. Additionally, gravity data will be integrated into the island scale model to refine the 3D crustal structure, and hence the subsurface temperatures.We initially focus on new subsurface temperature models of Ireland with uncertainty where the multi-parameter output models fit the input data and reveal the thermal structure within the crust and mantle, including the upper-crustal geothermal gradient. We then will look at the new applications of the methodology at the local scale, in particular at Krafla, Iceland, for a local geothermal powerplant application and the integration of melt to the inversion. The new workflows have potential, to be used as a resource to investigate geothermal regions worldwide.

  • Open Access

    Afar triple junction fed by single asymmetric mantle upwelling

    by Emma J. Watts, Rhiannon Rees, Philip Jonathan, Derek Keir, Rex N. Taylor, Melanie Siegburg, Emma L. Chambers, Carolina Pagli, Matthew J. Cooper, Agnes Michalik, et al.

    The arrival of upwellings within the mantle from Earths deep interior are commonly observed worldwide, but their role in driving volcanism during continental breakup has long been debated. Given that only a small fraction of Earth’s upwellings are situated under continents and a limited number of them are associated with active continental rifting, our understanding of these processes remains incomplete.Here, we investigate the interplay between continental breakup and mantle upwellings using the classic magma-rich continental rifting case study of the Afar triple junction in East Africa. Some studies previously proposed that the region is underlain by mantle upwelling(s), yet others argue for limited involvement of mantle plumes. Several discrete segments of the rift have been studied in terms of magma petrogenesis. However, until now, a paucity of high-precision geochemical data across the broader region has hampered our ability to test the models and evaluate the spatial characteristics and structure of this upwelling in the recent geologic past.Within this study, we present extensive new geochemical and isotopic data spanning the region and integrate these with existing geochemical and geophysical datasets shedding light on the spatial characteristics of the mantle beneath Afar. By combining geophysics and geochemistry using statistical approaches, our multi-disciplinary approach shows that Afar is underlain by a single, asymmetric heterogeneous mantle upwelling. Our findings not only validate the heterogeneous characteristics of mantle upwellings, but demonstrates their susceptibility to the dynamics of the overriding plates. This integrated approach yields valuable insights into the spatial complexity of mantle upwellings.

  • Open Access

    Mapping thermal conductivity in Ireland to determine geothermal potential

    by Emma L. Chambers, Duygu Kiyan, Riccardo Pasquali, Javier Fullea, Pat Meere, Sergei Lebedev, Chris Bean, Brian O'REilly

    High-quality maps of the geothermal gradient and temperature are essential when assessing the geothermal potential of a region. However, determining geothermal potential is a challenge when direct measurements of in situ temperature and thermal property information are sparse, as is the case in Ireland. In addition, individual geophysical methods are sensitive to a range of parameters, not solely temperature. We develop a novel approach to determine the geothermal gradient using a joint geophysical-petrological thermochemical inversion (Chambers et al. Tectonophysics (2023) & Fullea et al. GJI (2021)), which requires seismic surface wave data, thermal property data, and additional geophysical and petrophysical datasets. The multi-parameter models produced by the integrated inversions fit the surface-wave, heat flow and additional data, revealing the temperature, lithospheric structure and geothermal gradient within the crust and mantle.Here we present the new methodology and resulting models of Ireland’s subsurface temperature with a focus on new thermal conductivity measurements and their impact on temperature. A new map of thermal conductivity (TC) for all of Ireland was generated using all existing measurements of thermal conductivity, in addition to 609 new measurements from the optical scanning technique and 86 using the Divided Bar Apparatus (DB) which we use in the inversion. Our new methodology produces results comparable to past temperature and geophysical measurements and models. Importantly, the maps are within error of direct borehole temperature measurements, providing confidence in the results. Lithospheric and crustal thickness play a key control on the temperature gradient with areas of thinner lithosphere resulting in elevated geotherms. In some locations, we observe geotherms elevated beyond expectations which result from high radiogenic heat production from granitic and muddy limestone rocks. This new methodology provides a robust workflow for determining the geothermal potential in areas with limited direct measurements. The final temperature model updates previous maps of Ireland and will be used for future geothermal exploration and utilisation.