Sandra Janneth Perdomo Lara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Sandra Janneth Perdomo Lara has a total of 109 co-authors. Here are the top co-authors by number of shared publications:
- Andrés Cardona-Mendoza
El Bosque University
8 shared publications - Gloria Inés Lafaurie
Unidad de Investigación Básica Oral—UIBO, Vicerrectoría de Investigación, Facultad de Odontología, Universidad El Bosque, Bogotá 111321, Colombia
5 shared publications - Ana-Belén Gil-González
Universidad de Salamanca
4 shared publications - Angela V. Fonseca-Benitez
Affiliations Departamento de Nutrición y Bioquímica, Facultad de Ciencias, Pontificia Universidad Javeriana, Bogotá, Colombia, Universidad El Bosque, School of Dentistry, Bogotá, Colombia
3 shared publications - Diana Marcela Buitrago
Unidad de Investigación Básica Oral—UIBO, Vicerrectoría de Investigación, Facultad de Odontología, Universidad El Bosque, Bogotá 111321, Colombia
3 shared publications - Lautaro Rossi Labianca
Universidad de Salamanca
3 shared publications
Latest Publications
- Open Access
- 2 August 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (8) , 537
HAp/PLGA/Chitosan Scaffolds Fabricated by Freeze-Drying and 3D Printing for Bone Regeneration: In Vitro Evaluation and Finite Element Analysis
Tooth loss and bone resorption of the alveolar cavity caused by dental caries and periodontal disease remain major clinical challenges that compromise oral function. Tissue engineering approaches based on biocompatible scaffolds have emerged as promising strategies for bone regeneration; however, the influence of fabrication methods on scaffold performance remains unclear. This study developed hydroxyapatite/poly (lactic-coglycolic acid)/chitosan scaffolds (HAp/PLGA/CS) using freeze-drying and 3D-printing techniques and evaluated their physicochemical, biological, and biomechanical properties. The morphology, porosity, elemental composition, and mechanical properties of the scaffold were characterized, while the biocompatibility and osteogenic potential were evaluated using human dental pulp stem cells (hDPSCs). Finite element analysis (FEA) using COMSOL Multiphysics® Version 6.2. was performed to evaluate scaffold behavior under simulated dental implant loading conditions. The 3D-printed scaffolds exhibited significantly higher cell viability than the freeze-dried scaffolds, reaching approximately 85% in the 50% filling group compared with 50% in the freeze-dried group. Microstructural analysis revealed interconnected hierarchical porosity, including macro-, micro-, and submicrometer scale pores. Although the 50% infill scaffold showed the highest cell viability, the 70% infill scaffold demonstrated the most favorable osteogenic profile, with enhanced expression of RUNX2 and OSX. Both types exhibited degradation profiles compatible with early bone regeneration. FEA simulations indicated that further mechanical optimization is required to improve load transfer and reduce deformation at the implant–scaffold interface. Overall, HAp/PLGA/CS scaffolds showed potential as experimental bioactive platforms for bone tissue engineering, with 3D-printed scaffolds providing greater architectural control and favorable early osteogenic responses. However, the translational relevance of these findings remains preliminary and requires validation through long-term degradation studies, in vivo bone regeneration and osseointegration models, cyclic mechanical testing, and implant fixation experiments.
- 2 August 2026
- Published by MDPI AG in Biomimetics
- Vol. 11 (8) , 537
Open AccessHAp/PLGA/Chitosan Scaffolds Fabricated by Freeze-Drying and 3D Printing for Bone Regeneration: In Vitro Evaluation and Finite Element Analysis
Tooth loss and bone resorption of the alveolar cavity caused by dental caries and periodontal disease remain major clinical challenges that compromise oral function. Tissue engineering approaches based on biocompatible scaffolds have emerged as promising strategies for bone regeneration; however, the influence of fabrication methods on scaffold performance remains unclear. This study developed hydroxyapatite/poly (lactic-coglycolic acid)/chitosan scaffolds (HAp/PLGA/CS) using freeze-drying and 3D-printing techniques and evaluated their physicochemical, biological, and biomechanical properties. The morphology, porosity, elemental composition, and mechanical properties of the scaffold were characterized, while the biocompatibility and osteogenic potential were evaluated using human dental pulp stem cells (hDPSCs). Finite element analysis (FEA) using COMSOL Multiphysics® Version 6.2. was performed to evaluate scaffold behavior under simulated dental implant loading conditions. The 3D-printed scaffolds exhibited significantly higher cell viability than the freeze-dried scaffolds, reaching approximately 85% in the 50% filling group compared with 50% in the freeze-dried group. Microstructural analysis revealed interconnected hierarchical porosity, including macro-, micro-, and submicrometer scale pores. Although the 50% infill scaffold showed the highest cell viability, the 70% infill scaffold demonstrated the most favorable osteogenic profile, with enhanced expression of RUNX2 and OSX. Both types exhibited degradation profiles compatible with early bone regeneration. FEA simulations indicated that further mechanical optimization is required to improve load transfer and reduce deformation at the implant–scaffold interface. Overall, HAp/PLGA/CS scaffolds showed potential as experimental bioactive platforms for bone tissue engineering, with 3D-printed scaffolds providing greater architectural control and favorable early osteogenic responses. However, the translational relevance of these findings remains preliminary and requires validation through long-term degradation studies, in vivo bone regeneration and osseointegration models, cyclic mechanical testing, and implant fixation experiments.
- Open Access
- 15 July 2026
- Published by MDPI AG in Preprints.org
HAp/PLGA/Chitosan Scaffolds Fabricated by Freeze-Drying and 3D Printing for Bone Regeneration: In Vitro Evaluation and Finite Element Analysis
Tooth loss and alveolar bone resorption caused by dental caries and periodontal disease remain major clinical chal-lenges that compromise oral function. Tissue engineering approaches based on biocompatible scaffolds have emerged as promising strategies for bone regeneration; however, the influence of fabrication methods on scaffold performance re-mains unclear. This study developed hydroxyapatite/poly(lactic-co-glycolic acid)/chitosan (HAp/PLGA/CS) scaffolds using freeze-drying and 3D-printing techniques and evaluated their physicochemical, biological, and biomechanical properties.Scaffold morphology, porosity, degradation behavior, and mechanical properties were characterized, while biocompatibility and osteogenic potential were assessed using human dental pulp stem cells (hDPSCs). Finite element analysis (FEA) using COMSOL Multiphysics® was performed to evaluate scaffold behavior under simulated dental implant loading conditions.Both fabrication methods produced biocompatible scaffolds that supported cell viability and early osteogenic responses. The 3D-printed scaffolds exhibited significantly higher cell viability than freeze-dried scaf-folds, reaching approximately 85% in the 50% infill group compared with 50% in the freeze-dried group. Microstructural analysis revealed interconnected hierarchical porosity, including macro, micro, and submicron scale pores. Although the 50% infill scaffold showed the highest cell viability, the 70% infill scaffold demonstrated the most favorable osteo-genic profile, with enhanced RUNX2 and OSX expression. Both scaffold types exhibited degradation profiles compatible with early bone regeneration. FEA simulations indicated that further mechanical optimization is required to improve load transfer and reduce deformation at the implant–scaffold interface. Overall, HAp/PLGA/CS scaffolds showed prom-ising potential for bone tissue engineering. Among the formulations evaluated, 3D-printed scaffolds provided superior architectural control and enhanced osteogenic performance, although additional mechanical refinement is needed before clinical translation.
- 15 July 2026
- Published by MDPI AG in Preprints.org
Open AccessHAp/PLGA/Chitosan Scaffolds Fabricated by Freeze-Drying and 3D Printing for Bone Regeneration: In Vitro Evaluation and Finite Element Analysis
Tooth loss and alveolar bone resorption caused by dental caries and periodontal disease remain major clinical chal-lenges that compromise oral function. Tissue engineering approaches based on biocompatible scaffolds have emerged as promising strategies for bone regeneration; however, the influence of fabrication methods on scaffold performance re-mains unclear. This study developed hydroxyapatite/poly(lactic-co-glycolic acid)/chitosan (HAp/PLGA/CS) scaffolds using freeze-drying and 3D-printing techniques and evaluated their physicochemical, biological, and biomechanical properties.Scaffold morphology, porosity, degradation behavior, and mechanical properties were characterized, while biocompatibility and osteogenic potential were assessed using human dental pulp stem cells (hDPSCs). Finite element analysis (FEA) using COMSOL Multiphysics® was performed to evaluate scaffold behavior under simulated dental implant loading conditions.Both fabrication methods produced biocompatible scaffolds that supported cell viability and early osteogenic responses. The 3D-printed scaffolds exhibited significantly higher cell viability than freeze-dried scaf-folds, reaching approximately 85% in the 50% infill group compared with 50% in the freeze-dried group. Microstructural analysis revealed interconnected hierarchical porosity, including macro, micro, and submicron scale pores. Although the 50% infill scaffold showed the highest cell viability, the 70% infill scaffold demonstrated the most favorable osteo-genic profile, with enhanced RUNX2 and OSX expression. Both scaffold types exhibited degradation profiles compatible with early bone regeneration. FEA simulations indicated that further mechanical optimization is required to improve load transfer and reduce deformation at the implant–scaffold interface. Overall, HAp/PLGA/CS scaffolds showed prom-ising potential for bone tissue engineering. Among the formulations evaluated, 3D-printed scaffolds provided superior architectural control and enhanced osteogenic performance, although additional mechanical refinement is needed before clinical translation.
- Open Access
- 2 May 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4464
Enhanced Cellular Detection in Cervical Cytopathology: A Systematic Study of YOLO11 Training Paradigms
Automated cellular detection using deep learning is a key strategy for optimising cervical cancer screening by reducing the healthcare workload and inter-observer variability. However, analysing Whole Slide Image (WSI) patches presents challenges such as annotation scarcity, morphological complexity, and class imbalance. This study systematically evaluates YOLO11-n, YOLO11-s, and YOLO11-m to assess the impact of target variable granularity and training paradigms on performance. Four strategies were analysed: independent and multi-class models, each evaluated at both the specific cell label and diagnostic macro-group levels. To ensure clinical robustness, patient-level data partitioning was implemented to prevent data leakage. Performance was measured using precision, recall, and mAP (0.5 and 0.5:0.95). The results reveal critical trade-offs between fine-grained discrimination and model generalisation when varying the architectural complexity and labelling strategies. The findings indicate that diagnostic aggregation improves stability, whereas single-class training optimises specialised detection. These results provide methodological guidelines for designing AI-assisted screening systems and may inform future extensions of WSI-level diagnostic pipelines.
- 2 May 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4464
Open AccessEnhanced Cellular Detection in Cervical Cytopathology: A Systematic Study of YOLO11 Training Paradigms
Automated cellular detection using deep learning is a key strategy for optimising cervical cancer screening by reducing the healthcare workload and inter-observer variability. However, analysing Whole Slide Image (WSI) patches presents challenges such as annotation scarcity, morphological complexity, and class imbalance. This study systematically evaluates YOLO11-n, YOLO11-s, and YOLO11-m to assess the impact of target variable granularity and training paradigms on performance. Four strategies were analysed: independent and multi-class models, each evaluated at both the specific cell label and diagnostic macro-group levels. To ensure clinical robustness, patient-level data partitioning was implemented to prevent data leakage. Performance was measured using precision, recall, and mAP (0.5 and 0.5:0.95). The results reveal critical trade-offs between fine-grained discrimination and model generalisation when varying the architectural complexity and labelling strategies. The findings indicate that diagnostic aggregation improves stability, whereas single-class training optimises specialised detection. These results provide methodological guidelines for designing AI-assisted screening systems and may inform future extensions of WSI-level diagnostic pipelines.
- Open Access
- 13 April 2026
- Published by MDPI AG in Preprints.org
Enhanced Cellular Detection in Cervical Cytopathology: A Systematic Study of YOLOv11 Training Paradigms
Automated cellular detection using deep learning is a key strategy for optimising cervical cancer screening by reducing the healthcare workload and inter-observer variability. However, analyzing Whole Slide Image (WSI) patches presents challenges like annotation scarcity, morphological complexity, and class imbalance. This study conducts a systematic evaluation of YOLOv11 (n, s, and m variants) to assess the impact of target variable granularity and training paradigms on performance. Four strategies were analyzed: independent and multi-class models, each evaluated at both specific cell label and diagnostic macro-group levels. To ensure clinical robustness, patient-level data partitioning was implemented to prevent information leakage. Performance was measured using precision, recall, and mAP (0.5 and 0.5:0.95). The results reveal critical trade-offs between fine-grained discrimination and model generalization when varying architectural complexity and labeling strategies. Findings indicate that diagnostic aggregation improves stability, while single-class training optimizes specialized detection. These results provide methodological guidelines for designing AI-assisted screening systems and establish a foundation for integrating YOLOv11 detectors into Multiple Instance Learning (MIL) frameworks at the WSI scale.
- 13 April 2026
- Published by MDPI AG in Preprints.org
Open AccessEnhanced Cellular Detection in Cervical Cytopathology: A Systematic Study of YOLOv11 Training Paradigms
Automated cellular detection using deep learning is a key strategy for optimising cervical cancer screening by reducing the healthcare workload and inter-observer variability. However, analyzing Whole Slide Image (WSI) patches presents challenges like annotation scarcity, morphological complexity, and class imbalance. This study conducts a systematic evaluation of YOLOv11 (n, s, and m variants) to assess the impact of target variable granularity and training paradigms on performance. Four strategies were analyzed: independent and multi-class models, each evaluated at both specific cell label and diagnostic macro-group levels. To ensure clinical robustness, patient-level data partitioning was implemented to prevent information leakage. Performance was measured using precision, recall, and mAP (0.5 and 0.5:0.95). The results reveal critical trade-offs between fine-grained discrimination and model generalization when varying architectural complexity and labeling strategies. Findings indicate that diagnostic aggregation improves stability, while single-class training optimizes specialized detection. These results provide methodological guidelines for designing AI-assisted screening systems and establish a foundation for integrating YOLOv11 detectors into Multiple Instance Learning (MIL) frameworks at the WSI scale.
- Open Access
- 6 September 2025
- Published by Elsevier in European Journal of Cancer
- Vol. 229, 115768
Performance evaluation of machine learning models in cervical cancer diagnosis: Systematic review and meta-analysis
- 6 September 2025
- Published by Elsevier in European Journal of Cancer
- Vol. 229, 115768
Open AccessPerformance evaluation of machine learning models in cervical cancer diagnosis: Systematic review and meta-analysis
- 13 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (18) , 6451-6456
Temperature Measurement in Microwave-Induced Hyperthermia Treatments Using FBG Sensors
This paper presents a temperature study of cellular spheroids of the line MCF-07 under a hyperthermia (HT) treatment. A 3D printed culture plate embedded with optical fiber Bragg grating (FBG) sensors was designed to perform real-time temperature measurements of the spheroids. The proposed culture plate preserves the fiber sensors' integrity and functionality while remaining immune to the high electromagnetic interference scenario. A custom microwave applicator was designed to eliminate direct contact between the heating element and the samples, while considering the culture plate material's permittivity to ensure efficient heating. The heating setup maintains the samples' temperature within the HT range, which is crucial for predicting treatment outcomes. The sensors embedded in the designed culture plate achieved an accuracy within 0.31 ${}^\mathrm{C}$ . Initial observations of the temperature effects on spheroids are discussed, highlighting the potential of this approach to understand how temperature variations within the HT range affect cell cultures.
- 13 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (18) , 6451-6456
Temperature Measurement in Microwave-Induced Hyperthermia Treatments Using FBG Sensors
This paper presents a temperature study of cellular spheroids of the line MCF-07 under a hyperthermia (HT) treatment. A 3D printed culture plate embedded with optical fiber Bragg grating (FBG) sensors was designed to perform real-time temperature measurements of the spheroids. The proposed culture plate preserves the fiber sensors' integrity and functionality while remaining immune to the high electromagnetic interference scenario. A custom microwave applicator was designed to eliminate direct contact between the heating element and the samples, while considering the culture plate material's permittivity to ensure efficient heating. The heating setup maintains the samples' temperature within the HT range, which is crucial for predicting treatment outcomes. The sensors embedded in the designed culture plate achieved an accuracy within 0.31 ${}^\mathrm{C}$ . Initial observations of the temperature effects on spheroids are discussed, highlighting the potential of this approach to understand how temperature variations within the HT range affect cell cultures.
- Open Access
Laminin 332 functionalized surface improve implant roughness and oral keratinocyte bioactivity
- Open Access
- 29 May 2024
- Published by Springer Nature in BMC Infectious Diseases
- Vol. 24 (1) , 1-10
High frequency of alpha7-HPV in Colombian Caribbean coast women: cervical cancer screening analysis
SUMMARY: Background: Cervical cancer (CC) is a significant global public health concern, particularly in developing countries such as Colombia. The main risk factor involves high-risk HPV types (HR-HPV) infection, coupled with population-specific variables. The Caribbean region in Colombia lacks research on HR-HPV-type frequencies. Therefore, this study aims to establish the prevalence of type-specific HR-HPV and its association with sociodemographic factors among women undergoing cervical cytology screening. Methods: A cross-sectional study involving voluntary women who provided informed consent and completed a questionnaire capturing sociodemographic, clinical, and sexual behavior information was conducted. All participants underwent cervical cytology and molecular analysis. Generic HPV detection employed three simultaneous PCRs (GP5+/6+, MY09/11, and PU1R/2 M), and positive samples were genotyped using the Optiplex HPV Genotyping kit. The analysis encompassed the 12 types of high-risk HPV (HR-HPV-16,-18,-31,-33,-35,-39,-45,-51,-52,-56,-58, and − 59). Frequencies were reported based on geographic subregions within the Córdoba department, and disparities were made between single and multiple infections. Sociodemographic and clinical variables were subjected to ordinal logistic regression, with statistical significance at a p-value < 0.05. The statistical analyses utilized STATA 14® and R-Core Team-software. Results: We included 450 women, mean age 40 (SD $$\pm$$ 11.44). PCR analysis revealed 43% HPV-positive (n=192). GP5+/6+ detected the most positives at 26% (n=119), followed by PU1R/2 M at 22% (n = 100) and MY09/11 at 15% (n=69). Multiple infections occurred in 87.3% (n=142), primarily 2 to 4 types (47.37%, n=90). Dominant types were HPV-18 (15.6%, n=61), HPV-16 (14.9%, n=58), HPV-31 (13.0%, n = 51), and HPV-45 (11.5%, n=45). Logistic regression identified age above 60 as a risk for concurrent multiple types (OR=6.10; 95% CI 1.18–31.63). Menopause was protective (OR=0.31; 95% CI 0.11–0.89). Conclusions: Our study reveals a notable prevalence of multiple (2–4) high-risk HPV infections among adult women engaged in CC detection initiatives. Predominantly, α7 species constitute the prevalent HR-viral types, with the Medio Sinú subregion showing elevated prevalence. Menopausal status confers protection against diverse HR-HPV infections. Nevertheless, advancing age, particularly beyond 60 years, is linked to an increased susceptibility to simultaneous infections by multiple HPV-types.- 29 May 2024
- Published by Springer Nature in BMC Infectious Diseases
- Vol. 24 (1) , 1-10
Open AccessHigh frequency of alpha7-HPV in Colombian Caribbean coast women: cervical cancer screening analysis
SUMMARY: Background: Cervical cancer (CC) is a significant global public health concern, particularly in developing countries such as Colombia. The main risk factor involves high-risk HPV types (HR-HPV) infection, coupled with population-specific variables. The Caribbean region in Colombia lacks research on HR-HPV-type frequencies. Therefore, this study aims to establish the prevalence of type-specific HR-HPV and its association with sociodemographic factors among women undergoing cervical cytology screening. Methods: A cross-sectional study involving voluntary women who provided informed consent and completed a questionnaire capturing sociodemographic, clinical, and sexual behavior information was conducted. All participants underwent cervical cytology and molecular analysis. Generic HPV detection employed three simultaneous PCRs (GP5+/6+, MY09/11, and PU1R/2 M), and positive samples were genotyped using the Optiplex HPV Genotyping kit. The analysis encompassed the 12 types of high-risk HPV (HR-HPV-16,-18,-31,-33,-35,-39,-45,-51,-52,-56,-58, and − 59). Frequencies were reported based on geographic subregions within the Córdoba department, and disparities were made between single and multiple infections. Sociodemographic and clinical variables were subjected to ordinal logistic regression, with statistical significance at a p-value < 0.05. The statistical analyses utilized STATA 14® and R-Core Team-software. Results: We included 450 women, mean age 40 (SD $$\pm$$ 11.44). PCR analysis revealed 43% HPV-positive (n=192). GP5+/6+ detected the most positives at 26% (n=119), followed by PU1R/2 M at 22% (n = 100) and MY09/11 at 15% (n=69). Multiple infections occurred in 87.3% (n=142), primarily 2 to 4 types (47.37%, n=90). Dominant types were HPV-18 (15.6%, n=61), HPV-16 (14.9%, n=58), HPV-31 (13.0%, n = 51), and HPV-45 (11.5%, n=45). Logistic regression identified age above 60 as a risk for concurrent multiple types (OR=6.10; 95% CI 1.18–31.63). Menopause was protective (OR=0.31; 95% CI 0.11–0.89). Conclusions: Our study reveals a notable prevalence of multiple (2–4) high-risk HPV infections among adult women engaged in CC detection initiatives. Predominantly, α7 species constitute the prevalent HR-viral types, with the Medio Sinú subregion showing elevated prevalence. Menopausal status confers protection against diverse HR-HPV infections. Nevertheless, advancing age, particularly beyond 60 years, is linked to an increased susceptibility to simultaneous infections by multiple HPV-types.