JPJoy Clare Perkinson

Joy Clare Perkinson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Joy Clare Perkinson has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Faraday effect in polycrystalline Mn-doped InSb for LWIR applications

    by Rashi Sharma, Joy C. Perkinson, Nolan Peard, John LeBlanc, Neil Patel, Dennis Callahan, Christine Y. Wang, Romain Gaume, Kathleen A. Richardson

    The Faraday rotation (FR) in Mn-doped InSb (Mn-InSb) depends on extremely low doping of Mn into the InSb lattice. The polycrystalline Mn-InSb was prepared by direct alloying of InSb and Mn2Sb, followed by slow cooling of the melt. X-ray diffraction confirms the incorporation of Mn into the In sites, whereas the non-uniform precipitation of MnSb micro-nanoprecipitates was observed via SEM images. The FR of Mn-InSb was measured at room temperature in the 8 to 12 µm spectral range and compared to commercially-available undoped InSb as well as Te-doped InSb (Te-InSb) references and found to be about 1.27 - 1.35 times stronger than that of Te-InSb measured under the same conditions.


  • Magneto-optical properties of InSb for infrared spectral filtering

    by Nolan Peard, Dennis Callahan, Joy C. Perkinson, Qingyang Du, Neil S. Patel, Takian Fakhrul, John LeBlanc, Caroline A. Ross, Juejun Hu, Christine Y. Wang

    We present measurements of the Faraday effect in n-type InSb. The Verdet coefficient was determined for a range of carrier concentrations near 10 17 cm − 3 in the λ = 8 – 12 μ m long-wave infrared regime. The absorption coefficient was measured and a figure of merit was calculated for each sample. From these measurements, we calculated the carrier effective mass and illustrated the variation of the figure of merit with the wavelength. A method for creating a tunable bandpass filter via the Faraday rotation is discussed along with preliminary results from a prototype device.


  • Surface-emitting electroholographic SAW modulator

    by Joy C. Perkinson, Michael G. Moebius, Elizabeth J. Brundage, William A. Teynor, Steven J. Byrnes, James C. Hsiao, William D. Sawyer, Dennis M. Callahan, Ian W. Frank, John J. LeBlanc, et al.

    We report the design and operation of a surface-emitting surface acoustic wave (SAW) acousto-optical modulator which behaves as a cm-scale linear hologram in response to an applied electronic waveform. The modulator is formed by an optical waveguide, transducer, and out-coupling surface grating on a 1 mm-thick lithium niobate substrate. We demonstrate the ability to load and illuminate a 9-region linear hologram into the modulator's 8 mm-long interaction region using applied waveforms of 280–320 MHz. To the best of the authors’ knowledge, this is the first demonstration of a monolithically-integrated, surface-emitting SAW modulator fabricated using lithographic techniques. Applications include practical implementations of a holographic display.


  • Sawtooth structure formation under nonlinear-regime ion bombardment

    by Joy Clare Perkinson, Jennifer M. Swenson, Alexander DeMasi, Christa Wagenbach, Karl F Ludwig, Scott A Norris, Michael J Aziz

    Linear-regime Ar + bombardment of Si produces symmetrical ripple structures at ion incidence angles above 45° measured off-normal (Madi 2009 J. Phys.: Condens. Matter 21 ). In the nonlinear regime, new behaviors emerge. In this paper, we present experimental results of ion bombardment that continues into the nonlinear regime until pattern saturation at multiple ion incidence angles, showing the evolution of their grazing incidence small-angle x-ray scattering (GISAXS) spectra as well as atomic force microscopy topographs of the final, saturated structures. Asymmetric structures emerge parallel to the direction of the projected ion beam on the sample surface, constituting a height asymmetry not found in the linear regime. We then present simulations of surface height evolution under ion bombardment using a nonlinear partial differential equation developed by Pearson and Bradley (2015 J. Phys.: Condens. Matter 27 015010). We present simulated GISAXS spectra from these simulations, as well as simulated scattering from a sawtooth structure using the FitGISAXS software package (Babonneau 2010 J. Appl. Crystallogr . 43 929–36), and compare the simulated spectra to those observed experimentally. We find that these simulations reproduce many features of the sawtooth structures, as well as the nearly-flat final GISAXS spectra observed experimentally perpendicular to the sawtooth structures. However, the model fails to reproduce the final GISAXS spectra observed parallel to the sawtooth structures.


  • Open Access

    Distinguishing physical mechanisms using GISAXS experiments and linear theory: the importance of high wavenumbers

    by Scott A. Norris, Joy C. Perkinson, Mahsa Mokhtarzadeh, Eitan Anzenberg, Michael J. Aziz, Karl F. Ludwig

    In this work we analyze GISAXS measurements of the structure factor of Si surfaces evolving during 1 keV Ar+ ion bombardment. Using newly-developed methods sensitive to the full range of experimentally-available wavenumbers q, we extract the linear amplification rate R(q) governing surface stability over a range of wavenumbers 4–5 times larger than has previously been obtained. Comparing with theoretical models also retaining full wavenumber-dependence, we find an excellent fit of the experimental data over the full range of irradiation angles and wavenumbers. Moreover, the fitted parameter values represent experimental evaluation of the magnitudes of most physical mechanisms currently believed to be important to the pattern-formation process. In all cases, the extracted values agree well with direct observations or atomistic simulations of the same quantities, suggesting that GISAXS analysis may allow more powerful comparison between experiment and theory than had previously been thought.


  • Designing steep, sharp patterns on uniformly ion-bombarded surfaces

    by Joy C. Perkinson, Michael J. Aziz, Michael P. Brenner, Miranda Holmes-Cerfon

    Significance: Large-amplitude, steep structures are of interest for a variety of applications from micromechanics to data storage. Many such structures must be manufactured via effort-intensive direct engraving. Here, we present and experimentally test a method for designing simple structures that will evolve into a desired steep structure under uniform ion irradiation. This process is based on the mathematics of shock waves, a theory originally developed to understand fluids and gases. We show that the dynamics of uniformly bombarded surfaces are controlled by special, so-called undercompressive shocks, which manifest as steep parts of the surface that arise spontaneously and move predictably. Their evolution equation requires only one parameter that is easily measured. The proposed process is scalable with promise for high-throughput manufacturing.


  • Model-independent test of the truncated crater function theory of surface morphology evolution during ion bombardment

    by Joy C. Perkinson, Eitan Anzenberg, Michael J. Aziz, Karl F. Ludwig

    A broad class of ``local response'' theories seeks to predict morphology evolution during energetic particle irradiation in terms of average surface height response to individual impacts\char22{}an approach that has been generalized by the crater function formalism of Norris et al. [J. Phys.: Condens. Matter 21, 224017 (2009); Nat. Commun. 2, 276 (2011)]. Keeping only the terms in the crater function formalism associated with the response of a flat surface has facilitated the use of molecular dynamics simulations of individual ion impacts to predict the stability or instability of a flat surface to ion bombardment. Here we report a sensitive experimental test of this truncated crater function theory that is independent of any a priori knowledge of the crater function itself. Existing measurements for 1 keV ${\mathrm{Ar}}^{+}/\mathrm{Si}$ and ${\mathrm{Kr}}^{+}/\mathrm{Ge}$ are inconsistent with the predictions of truncated crater function theory, for any conceivable crater function, at high bombardment angles. The failure of the theory suggests that the prediction of surface evolution from simulations of single-ion impacts will be more challenging than had been assumed.


  • Nanoscale topographic pattern formation on Kr+-bombarded germanium surfaces

    by Joy C. Perkinson, Charbel S. Madi, Michael J. Aziz

    The nanoscale pattern formation of Ge surfaces uniformly irradiated by Kr+ ions was studied in a low-contamination environment at ion energies of 250 and 500 eV and at angles of 0° through 80°. The authors present a phase diagram of domains of pattern formation occurring as these two control parameters are varied. The results are insensitive to ion energy over the range covered by the experiments. Flat surfaces are stable from normal incidence up to an incidence angle of θ = 55° from normal. At higher angles, the surface is linearly unstable to the formation of parallel-mode ripples, in which the wave vector is parallel to the projection of the ion beam on the surface. For θ ≥ 75° the authors observe perpendicular-mode ripples, in which the wave vector is perpendicular to the ion beam. This behavior is qualitatively similar to those of Madi et al. for Ar+-irradiated Si but is inconsistent with those of Ziberi et al. for Kr+-irradiated Ge. The existence of a window of stability is qualitatively inconsistent with a theory based on sputter erosion [R. M. Bradley and J. M. Harper, J. Vac. Sci. Technol. A 6, 2390 (1988)] and qualitatively consistent with a model of ion impact-induced mass redistribution [G. Carter and V. Vishnyakov, Phys. Rev. B 54, 17647 (1996)] as well as a crater function theory incorporating both effects [S. A. Norris et al., Nat. Commun. 2, 276 (2011)]. The critical transition angle between stable and rippled surfaces occurs 10°–15° above the value of 45° predicted by the mass redistribution model.


  • Open Access

    Nanoscale surface pattern formation kinetics on germanium irradiated by Kr+ions

    by Eitan Anzenberg, Joy C. Perkinson, Charbel S. Madi, Michael J. Aziz, Karl F. Ludwig

    Nanoscale surface topography evolution on Ge surfaces irradiated by 1 keV Kr+ ions is examined in both directions perpendicular and parallel to the projection of the ion beam on the surface. Grazing incidence small angle x-ray scattering is used to measure in situ the evolution of surface morphology via the linear dispersion relation. A transition from smoothing (stability) to pattern-forming instability is observed at a critical ion incidence angle of approximately 62° with respect to the surface normal. The linear theory quadratic coefficients which determine the surface stability/instability are determined as a function of bombardment angle. The Ge surface evolution during Kr+ irradiation is qualitatively similar to that observed for Ar+ irradiation of Si. However, in contrast to the case of Si under Ar+ irradiation, the critical angle separating stability and instability for Ge under Kr+ irradiation cannot be quantitatively reproduced by the simple Carter-Vishnyakov mass redistribution model.