Bernhard Stoeckl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bernhard Stoeckl has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Christoph Hochenauer
Institute of Thermal Engineering, Graz University of Technology, Inffeldgasse 25b, 8010 Graz, Austria
14 shared publications - Vanja Subotić
Institute of Thermal Engineering, Graz University of Technology, Inffeldgasse 25b, A-8010 Graz, Austria
9 shared publications Hartmuth Schroettner
5 shared publications- Michael Preininger
Graz University of Technology
5 shared publications - Hartmuth Schroettner
Institute for ElectronMicroscopy and Nanoanalysis, Graz University of Technology, Graz, Austria
4 shared publications David Reichholf
3 shared publications
Latest Publications
- Open Access
- 3 June 2020
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 11 (1) , 141
Correction to: Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance
- 3 June 2020
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 11 (1) , 141
Open AccessCorrection to: Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance
- Open Access
- 16 April 2020
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 11 (1) , 121-139
Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance
Solid oxide fuel cells represent a promising technology to increase the electrical efficiency of biomass-based combined-heat-power systems in comparison to state-of-the-art gas engines, additionally providing high temperature heat. To identify favorable fuel gas compositions for an efficient coupling with gasifiers at low degradation risk is of major importance to ensure stability, reliability, and durability of the systems used, thus increasing attractiveness of electricity production from biomass. Therefore, this study presents a comprehensive analysis on the influence of main gas components from biomass gasification on the performance and efficiency of a cell relevant for real application. An industrial-size electrolyte supported single cell with nickel/gadolinium-doped ceria anode was selected showing high potential for gasifier-solid oxide fuel cell systems. Beneficial gas component ratios enhancing the power output and electric efficiency are proposed based on the experimental study performed. Furthermore, the degradation stability of a SOFC fueled with a synthetic product gas representing steam gasification of woody biomass was investigated. After 500 h of operation under load at a steam-to-carbon ratio of 2.25 in the fuel gas, no performance or anode degradation could be detected.
- 16 April 2020
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 11 (1) , 121-139
Open AccessInvestigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance
Solid oxide fuel cells represent a promising technology to increase the electrical efficiency of biomass-based combined-heat-power systems in comparison to state-of-the-art gas engines, additionally providing high temperature heat. To identify favorable fuel gas compositions for an efficient coupling with gasifiers at low degradation risk is of major importance to ensure stability, reliability, and durability of the systems used, thus increasing attractiveness of electricity production from biomass. Therefore, this study presents a comprehensive analysis on the influence of main gas components from biomass gasification on the performance and efficiency of a cell relevant for real application. An industrial-size electrolyte supported single cell with nickel/gadolinium-doped ceria anode was selected showing high potential for gasifier-solid oxide fuel cell systems. Beneficial gas component ratios enhancing the power output and electric efficiency are proposed based on the experimental study performed. Furthermore, the degradation stability of a SOFC fueled with a synthetic product gas representing steam gasification of woody biomass was investigated. After 500 h of operation under load at a steam-to-carbon ratio of 2.25 in the fuel gas, no performance or anode degradation could be detected.
- 1 February 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 450
Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack
- 1 February 2020
- Published by Elsevier in Journal of Power Sources
- Vol. 450
Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack
- 1 January 2020
- Published by Elsevier in Energy Conversion and Management
- Vol. 203
Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system
- 1 January 2020
- Published by Elsevier in Energy Conversion and Management
- Vol. 203
Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system
- 1 November 2019
- Published by Elsevier in Applied Energy
- Vol. 254
Performance of a ten-layer reversible Solid Oxide Cell stack (rSOC) under transient operation for autonomous application
- 1 November 2019
- Published by Elsevier in Applied Energy
- Vol. 254
Performance of a ten-layer reversible Solid Oxide Cell stack (rSOC) under transient operation for autonomous application
- Open Access
- 17 July 2019
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (12) , F774-F783
High Utilization of Humidified Ammonia and Methane in Solid Oxide Fuel Cells: An Experimental Study of Performance and Stability
- 17 July 2019
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (12) , F774-F783
Open AccessHigh Utilization of Humidified Ammonia and Methane in Solid Oxide Fuel Cells: An Experimental Study of Performance and Stability
- 10 July 2019
- Published by The Electrochemical Society in ECS Transactions
- Vol. 91 (1) , 1601-1610
Ammonia as Promising Fuel for Solid Oxide Fuel Cells: Experimental Analysis and Performance Evaluation
In the course of this study the direct utilization of ammonia in different types of solid oxide fuel cells (SOFCs), such as anode- and electrolyte-supported SOFC, is investigated. Experiments in low fuel utilization, exhibited excellent performance of ammonia in SOFCs, although the power outputs of equivalent hydrogen/nitrogen fuels were not attained due to the incomplete endothermic ammonia decomposition. Next, the single cells were operated under high fuel utilization conditions and methane was added to the humidified ammonia stream, where they showed excellent ammonia- and methane conversions. The stability of the cells used was proven over a period of at least 48 hours with a variety of fuel mixtures. Post mortem scanning electron microscopy analysis of the anode micro-structures indicated nitriding effects of nickel, as microscopic pores and enlargements of the metallic parts occurred. Finally, a long-term test over 1,000 hours was carried out using a ten-layer stack consisting of electrolyte-supported cells.
- 10 July 2019
- Published by The Electrochemical Society in ECS Transactions
- Vol. 91 (1) , 1601-1610
Ammonia as Promising Fuel for Solid Oxide Fuel Cells: Experimental Analysis and Performance Evaluation
In the course of this study the direct utilization of ammonia in different types of solid oxide fuel cells (SOFCs), such as anode- and electrolyte-supported SOFC, is investigated. Experiments in low fuel utilization, exhibited excellent performance of ammonia in SOFCs, although the power outputs of equivalent hydrogen/nitrogen fuels were not attained due to the incomplete endothermic ammonia decomposition. Next, the single cells were operated under high fuel utilization conditions and methane was added to the humidified ammonia stream, where they showed excellent ammonia- and methane conversions. The stability of the cells used was proven over a period of at least 48 hours with a variety of fuel mixtures. Post mortem scanning electron microscopy analysis of the anode micro-structures indicated nitriding effects of nickel, as microscopic pores and enlargements of the metallic parts occurred. Finally, a long-term test over 1,000 hours was carried out using a ten-layer stack consisting of electrolyte-supported cells.
- 10 July 2019
- Published by The Electrochemical Society in ECS Transactions
- Vol. 91 (1) , 2589-2600
Electrochemical Characterization and Performance Assessment of SOC Stacks in Electrolysis Mode
High temperature electrolysis (HTE) of steam, CO2, and steam and CO2 for highly efficient generation of hydrogen, carbon monoxide as well as syngas was investigated for four solid oxide cell stacks, all supplied by different stack manufacturers. The SOCs employed within the stacks were planar, and electrolyte or electrode supported with an industrial size between 80 and 128 cm². A comprehensive electrochemical characterization of both stacks and individual cells within the stacks was conducted by means of electrochemical impedance spectroscopy and polarization curve measurement. Detailed performance analyses showed the highest efficiency when operating the stack under H2O electrolysis, followed by co-electrolysis and eventually CO2 electrolysis. Subsequently, the stacks were operated under reversible system-relevant steady-state conditions, thus varying the working temperatures, the current density and the gas inlet flow. For that purpose both the conversion rate and fuel utilization were set to be between 70% and 80%. All stacks were operated for long-term periods of >1,000 h, during which degradation monitoring was applied. The results obtained within the present study allow a better understanding of the electrochemical processes that occur during reversible operation and especially HTE, and provide a guideline for optimized operation of a fully autonomous rSOC system.
- 10 July 2019
- Published by The Electrochemical Society in ECS Transactions
- Vol. 91 (1) , 2589-2600
Electrochemical Characterization and Performance Assessment of SOC Stacks in Electrolysis Mode
High temperature electrolysis (HTE) of steam, CO2, and steam and CO2 for highly efficient generation of hydrogen, carbon monoxide as well as syngas was investigated for four solid oxide cell stacks, all supplied by different stack manufacturers. The SOCs employed within the stacks were planar, and electrolyte or electrode supported with an industrial size between 80 and 128 cm². A comprehensive electrochemical characterization of both stacks and individual cells within the stacks was conducted by means of electrochemical impedance spectroscopy and polarization curve measurement. Detailed performance analyses showed the highest efficiency when operating the stack under H2O electrolysis, followed by co-electrolysis and eventually CO2 electrolysis. Subsequently, the stacks were operated under reversible system-relevant steady-state conditions, thus varying the working temperatures, the current density and the gas inlet flow. For that purpose both the conversion rate and fuel utilization were set to be between 70% and 80%. All stacks were operated for long-term periods of >1,000 h, during which degradation monitoring was applied. The results obtained within the present study allow a better understanding of the electrochemical processes that occur during reversible operation and especially HTE, and provide a guideline for optimized operation of a fully autonomous rSOC system.
- 1 July 2018
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 43 (27) , 12398-12412
Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
- 1 July 2018
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 43 (27) , 12398-12412
Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
- 1 June 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 275, 256-264
SOFC operation with carbon oxides: Experimental analysis of performance and degradation
- 1 June 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 275, 256-264
SOFC operation with carbon oxides: Experimental analysis of performance and degradation