VPVinayak Pachkawade

Vinayak Pachkawade

*This is an algorithmically generated author record based on publicly available information.

Vinayak Pachkawade has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Transduction in M/NEMS—Actuation and Sensing: A Review

    by Vinayak Pachkawade

    This article covers rigorous overview of diverse transduction principles that have enabled successful development of Micro/Nanoelectromechanical Systems (MEMS/NEMS) devices widely used for sensing and actuation. The review begins by classifying various transduction techniques, understanding cross-domain couplings, and discussing underlying working principles that drive these transducer operations. Both actuation and sensing modes of each transduction method are presented along with deeper discussion on the real issues and/or technological challenges that have been/are currently being addressed. The article presents pros and cons of different transduction techniques, presents comparative performance of one over another (in terms of transduction efficiency, force & displacement, nonlinearity, energy requirements, reliability, etc.), and provides scientific insights.


  • Open Access

    Transduction in MEMS/NEMS Based Actuation and Sensing

    by Vinayak Pachkawade

    This article offers rigorous overview of diverse transduction methods that have enabled successful development of Micro/Nanoelectromechanical Systems (MEMS/NEMS) components and devices used for sensing and actuation. The paper focuses on providing educational insights on the transductions used in MEMS/NEMS, and curates the latest applications and design trends. The review begins by classifying various transduction techniques, explaining cross-domain couplings, presents an underlying working principles and governing equations that drive transducer operation. Both actuation and sensing modes of each transduction method are exclusively explained and discussed, accompanied by the latest case study examples and references. The article provides detailed scientific insights into the widely used transduction techniques in MEMS/NEMS, addresses effective comparative performance of one over another (force, displacement, resonance frequency, quality factor, noise, nonlinearity, energy requirements, etc.) The paper also highlights emerging materials and fabrication platforms using which these transducers are developed

  • Open Access

    N/MEMS Biosensors: An Introduction

    by Vinayak Pachkawade

    In the 21st century, biosensors have gathered much wider attention than ever before, irrespective of the technology that promises to bring them forward. With the recent COVID-19 outbreak, the concern and efforts to restore global health and well-being are rising at an unprecedented rate. A requirement to develop precise, fast, point-of-care, reliable, easily disposable/reproducible and low-cost diagnostic tools have ascended. Biosensors form a primary element of hand-held medical kits, tools, products, and/or instruments. They have a very wide range of applications such as nearby environmental checks, detecting the onset of a disease, food quality, drug discovery, medicine dose control, and many more. Thischapter explains how Nano/Micro-Electro-Mechanical Systems (N/MEMS) can be enabling technology towards a sustainable, scalable, ultra-miniaturized, easy-to-use, energy efficient, and integrated bio/chemical sensing system. This study provides a deeper insight into the fundamentals, recent advances, and potential end applications of N/MEMS sensors and integrated systems to detect and measure the concentration of biological and/or chemical analytes. Transduction principle/s, materials, efficient designs including readout technique, and sensor performance are explained. This is followed by a discussion on how N/MEMS biosensors continue to evolve. The challenges and possible opportunities are also discussed.

  • MEMS sensor for detection and measurement of ultra-fine particles

    by Vinayak Pachkawade, Zion Tse

    This paper investigates the performance of the micro-electro-mechanical systems resonant sensor used for particle detection and concentration measurement. The fine and ultra-fine particles such as particulate matter (PM), ferrous particles, and nanoparticles are known to contaminate the atmosphere, fluids used in industrial machines, and food, respectively. The physical principles involved in the target particles accumulating on the sensor are presented. Micro-gravimetric resonators that use primarily piezoelectric and thermally actuated transducers for particle detection and concentration measurement in air and high-viscosity liquids are analysed. Critical sensor features, such as maximum possible parametric sensitivity, the detection limit of particle size and mass concentration, linear dynamic range, and output stability, are thoroughly evaluated.


  • Open Access

    Ultra-Precise MEMS Based Bio-Sensors

    by Vinayak Pachkawade

    This chapter evaluated the state-of-the art MEMS sensors used for bio sensing applications. A new class of resonant micro sensor is studied. A sensor structure based on the array of weakly coupled resonators is presented. It is shown that due to the weak coupling employed between the resonators in an array manifest ultra-high sensitivity of the output to the added analytes/biomolecules. Due to the highly-precise output of such bio-sensors, minimum detectable mass in the range of sub-actogram is also possible using such MEMS sensors. Analytical modeling of such micro biosensors is presented in this chapter to understand the key performance parameters. Furthermore, role of these new classes of MEMS resonant biosensors operating at ambient temperature and/or pressure is also discussed.


  • State-of-the-Art in Mode-Localized MEMS Coupled Resonant Sensors: A Comprehensive Review

    by Vinayak Pachkawade

    This article reviews the investigation of the mode-localized microelectromechanical system (MEMS) coupled resonant sensors. This class of a sensor features a new approach in the sensing method (i.e. sensing shifts in the eigenstates/amplitude ratio (AR) instead of a frequency shift) in resonant devices. The key performance metrics and progress in terms of sensitivity, noise optimization, resolution, output stability, and bandwidth are closely observed for the resonant devices that use multi-degree of freedom (m-DoF) resonators for transduction and subsequent sensing. A critical analysis, insight, and wide-ranging applications are studied for the mode-localized sensors that operate in a vacuum (with a higher quality factor, Q) or in an atmospheric pressure environment. Parameters such as the role of the operating/bias point, modal overlap, different forms of the output, and nonlinearity in the output are analyzed. The impact of structural asymmetry and how it can contribute to the performance enhancement of the sensor design is reported. An operation of the mode-localized sensors in the open/closed-loop configuration, in linear and nonlinear regions, is presented to understand the attempts made to enhance/optimize the sensor performance. Several potential applications developed particularly in the past five-year time span are discussed. Future endeavors and concluding remarks are offered for this emerging class of a coupled resonant (CR) sensor that features unprecedented ultrahigh parametric sensitivity, parallel detection capability of multiple analyte/s, and inherent common-mode rejection.


  • Open Access

    A New Readout Method for a High Sensitivity Capacitance Sensor Based on Weakly Coupled Resonators

    by Vinayak Pachkawade

    This paper proposes a new readout method for a sensor to detect minute variations in the capacitance. A sensor is based on the weakly coupled electrical resonators that use an amplitude ratio (AR) as an output signal. A new readout scheme with a relatively higher output sensitivity is proposed to measure the relative changes in the input capacitor. A mathematical model is derived to express the readout output as a function of change in the capacitance. To validate the theoretical model, a system is modelled and designed using an industry-standard electronic circuit design environment. SPICE simulation results are presented for a wide range of design parameters, such as varying coupling factors between the two electrical resonators. Sensitivity comparison between the existing and the proposed AR readout is presented to show the effectiveness of the method of detection proposed in this work.


  • Open Access

    A System-Level Modelling of Noise in Coupled Resonating MEMS Sensors

    by Vinayak Pachkawade

    This paper presents realistic system-level modeling of effective noise sources in a coupled resonating mode-localized MEMS sensors. A governing set of differential equations are used to build a numerical model of a mechanical noise source in a coupled-resonator sensor and an effective thermo-mechanical noise is quantified through the simulation performed via SIMULINK. On a similar note, an effective noise that stems from the electronic readout used for the coupled resonating MEMS sensors is also quantified. Various noise sources in electronic readout are identified and the contribution of each is quantified. A comparison between an effective mechanical and electronic noise in a sensor system aids in identifying the dominant noise source in a sensor system. A method to optimize the system noise floor for an amplitude-based readout is presented. The proposed models present a variety of operating conditions, such as finite quality factor, varying coupled electrostatic spring strength, and operation with in-phase and out-of-phase mode. The proposed models aim to study the impact of fundamental noise processes that govern the ultimate resolution into a coupled resonating system used for various sensing applications.

  • Direct laser writing to fabricate capacitively transduced resonating sensor

    by Vinayak Pachkawade, Delphine Cerica, Samuel Dricot, Serguei Stoukatch, Michael Kraft