Branka Andričić
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Branka Andričić has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Ivka Klarić
Faculty of Chemistry and Technology, University of Split, 21000 Split, Croatia
4 shared publicationsTonka Kovačić
Department of Organic Technology, Faculty of Chemistry and Technology, Teslina 10/V, 21000 Split, Croatia
4 shared publicationsLjerka Kratofil Krehula
2 shared publications- Matko Erceg
Kemijsko-tehnološki fakultet, Zavod za organsku tehnologiju
2 shared publications Sanja Perinović
2 shared publicationsAdela Grgić
Department of Organic Technology, Faculty of Chemistry and Technology, Teslina 10/V, 21000 Split, Croatia
1 shared publication
Latest Publications
- Open Access
- 5 July 2022
- Published by University of Split in St open
- Vol. 3, 1-7
Heterogeneous catalytic transesterification of waste vegetable oil using modified natural zeolite
Objectives: In the search of an economical process for bio-diesel synthesis, waste cooking oil was analyzed as a poten-tial feedstock. The influence of different concentrations and granulations of the zeolite catalyst on the yield and quality of the final product was also investigated.Methods: The pretreatment of waste oil was carried out using the simple processes of filtration and drying with CaCl2, after which its physicochemical properties were de-termined. Transesterification of waste oil with methanol was carried out using zeolite clinoptilolite as the catalyst. Its preparation included modification with sodium hydrox-ide, drying at 105°C and calcination at 300°C. As for the waste oil, the density, acid and peroxide number, moisture content, kinematic viscosity and flash point of the obtained biodiesels were determined by standardized methods. After the synthesis, the Fourier transformation infrared (FT-IR) spectra of the obtained biodiesel and waste cooking oil were recorded and compared.Results: The process of transesterification with methanol was found to be suitable due to the high conversion of waste oil esters under relatively mild reaction conditions. Moreover, modified natural clinoptilolite proved to be a suitable catalyst for the process of biodiesel production. At each catalyst concentration and granulation, the biodiesel yield was satisfactory and its quality parameters met the prescribed standards. Conclusion: The basic characteristics of the biodiesel ob-tained from waste cooking oil enable its potential appli-cation. Moreover, the properties of clinoptilolite, such as concentration and particle size, can be adjusted for each transesterification process to attain high quality product. The performed experiment presents an example of the efficient linking of biofuel production and waste oil dis-posal processes.
- 5 July 2022
- Published by University of Split in St open
- Vol. 3, 1-7
Open AccessHeterogeneous catalytic transesterification of waste vegetable oil using modified natural zeolite
Objectives: In the search of an economical process for bio-diesel synthesis, waste cooking oil was analyzed as a poten-tial feedstock. The influence of different concentrations and granulations of the zeolite catalyst on the yield and quality of the final product was also investigated.Methods: The pretreatment of waste oil was carried out using the simple processes of filtration and drying with CaCl2, after which its physicochemical properties were de-termined. Transesterification of waste oil with methanol was carried out using zeolite clinoptilolite as the catalyst. Its preparation included modification with sodium hydrox-ide, drying at 105°C and calcination at 300°C. As for the waste oil, the density, acid and peroxide number, moisture content, kinematic viscosity and flash point of the obtained biodiesels were determined by standardized methods. After the synthesis, the Fourier transformation infrared (FT-IR) spectra of the obtained biodiesel and waste cooking oil were recorded and compared.Results: The process of transesterification with methanol was found to be suitable due to the high conversion of waste oil esters under relatively mild reaction conditions. Moreover, modified natural clinoptilolite proved to be a suitable catalyst for the process of biodiesel production. At each catalyst concentration and granulation, the biodiesel yield was satisfactory and its quality parameters met the prescribed standards. Conclusion: The basic characteristics of the biodiesel ob-tained from waste cooking oil enable its potential appli-cation. Moreover, the properties of clinoptilolite, such as concentration and particle size, can be adjusted for each transesterification process to attain high quality product. The performed experiment presents an example of the efficient linking of biofuel production and waste oil dis-posal processes.
- 9 April 2016
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 127 (1) , 789-797
Kinetic analysis of poly(ethylene oxide)/lithium montmorillonite nanocomposites
- 9 April 2016
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 127 (1) , 789-797
Kinetic analysis of poly(ethylene oxide)/lithium montmorillonite nanocomposites
- 1 October 2010
- Published by Elsevier in Thermochimica Acta
- Vol. 510 (1-2) , 97-102
Thermal properties of poly(l-lactide)/olive stone flour composites
- 1 October 2010
- Published by Elsevier in Thermochimica Acta
- Vol. 510 (1-2) , 97-102
Thermal properties of poly(l-lactide)/olive stone flour composites
- 1 March 2009
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 17 (1) , 20-27
Evaluation of Poly(ethylene-terephthalate) Products of Chemical Recycling by Differential Scanning Calorimetry
- 1 March 2009
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 17 (1) , 20-27
Evaluation of Poly(ethylene-terephthalate) Products of Chemical Recycling by Differential Scanning Calorimetry
- Open Access
- 1 December 2008
- Published by Walter de Gruyter GmbH in e-Polymers
- Vol. 8 (1) , 1039-1050
Study of PET depolymerization during recycling
Depolymerization of poly(ethylene-terephthalate) (PET) in PET/HDPE blends, obtained from virgin polymers during mechanical recycling was studied. Extrusion of PET/HDPE blends was simulation of the first cycle of recycling and extrusion of the blends with EPDM/HDPE (E-M) masterbatch and HDPE/EPDM (PEM) masterbatch the second cycle. After that the samples were additionally treated to examine their thermooxidative stability. Blends were characterized by determination of the concentration of carboxyl groups by Pohl titration, by FTIR spectroscopy and differential scanning calorimetry (DSC) to determine crystallization (T c ) and melting (T m ) temperatures. The concentration of determinated carboxyl end groups in blends indicate presence of formed polymer radicals with hydroxyl-carboxyl end groups as the result of depolymerization of PET. Presence of characteristic groups was also confirmed by FTIR. DSC results indicate the influence of HDPE on crystallization temperature of PET and points to the fact that even degraded samples maintain the chemical structure of PET. From the results it can be seen that addition of the particular modifier can reduce and even prevent the depolymerization during the recycling process.
- 1 December 2008
- Published by Walter de Gruyter GmbH in e-Polymers
- Vol. 8 (1) , 1039-1050
Open AccessStudy of PET depolymerization during recycling
Depolymerization of poly(ethylene-terephthalate) (PET) in PET/HDPE blends, obtained from virgin polymers during mechanical recycling was studied. Extrusion of PET/HDPE blends was simulation of the first cycle of recycling and extrusion of the blends with EPDM/HDPE (E-M) masterbatch and HDPE/EPDM (PEM) masterbatch the second cycle. After that the samples were additionally treated to examine their thermooxidative stability. Blends were characterized by determination of the concentration of carboxyl groups by Pohl titration, by FTIR spectroscopy and differential scanning calorimetry (DSC) to determine crystallization (T c ) and melting (T m ) temperatures. The concentration of determinated carboxyl end groups in blends indicate presence of formed polymer radicals with hydroxyl-carboxyl end groups as the result of depolymerization of PET. Presence of characteristic groups was also confirmed by FTIR. DSC results indicate the influence of HDPE on crystallization temperature of PET and points to the fact that even degraded samples maintain the chemical structure of PET. From the results it can be seen that addition of the particular modifier can reduce and even prevent the depolymerization during the recycling process.
- 11 April 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (2) , 1002-1008
Polymer blends based on poly(vinyl chloride) and biodegradable aliphatic–aromatic copolyester
- 11 April 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (2) , 1002-1008
Polymer blends based on poly(vinyl chloride) and biodegradable aliphatic–aromatic copolyester
- 1 February 2008
- Published by Wiley in Macromolecular Symposia
- Vol. 263 (1) , 96-101
Thermal Properties of Poly(L‐lactide)/Calcium Carbonate Nanocomposites
Summary: Thermal properties of nanocomposites prepared of poly(L‐lactide) (PLLA) and CaCO3 applying differential scanning (DSC) calorimetry and thermogravimetry (TG) were studied. Nanocomposites were prepared by extrusion process at 170 °C. DSC measurements show that CaCO3 has no influence on glass transition and melting point of PLLA but lowers its cold crystallization temperature. There is no difference in glass transition temperature of PLLA before and after extrusion. High temperature thermal stability of the PLLA in the composites is poorer than neat PLLA. Kinetic parameters also indicate greater reactivity of the system upon CaCO3 addition.
- 1 February 2008
- Published by Wiley in Macromolecular Symposia
- Vol. 263 (1) , 96-101
Thermal Properties of Poly(L‐lactide)/Calcium Carbonate Nanocomposites
Summary: Thermal properties of nanocomposites prepared of poly(L‐lactide) (PLLA) and CaCO3 applying differential scanning (DSC) calorimetry and thermogravimetry (TG) were studied. Nanocomposites were prepared by extrusion process at 170 °C. DSC measurements show that CaCO3 has no influence on glass transition and melting point of PLLA but lowers its cold crystallization temperature. There is no difference in glass transition temperature of PLLA before and after extrusion. High temperature thermal stability of the PLLA in the composites is poorer than neat PLLA. Kinetic parameters also indicate greater reactivity of the system upon CaCO3 addition.
- 22 January 2008
- Published by Wiley in Polymer Engineering & Science
- Vol. 48 (3) , 572-577
Properties of recycled material containing poly(vinyl chloride), polypropylene, and calcium carbonate nanofiller
Even at low content, polypropylene significantly worsens mechanical properties of the recycled PVC composite, i.e. tensile strength at break and elongation at break. But, if small quantities of surface modified nanofiller calcium carbonate is added, an applicable composite that contains 10–30% of waste material can be made. It was determined that nanosized calcium carbonate lowers melting point of polypropylene, perhaps by changing its crystalline form and has no influence on thermooxidative degradation of poly(vinyl chloride). Addition of nanofiller slightly lowers the surface free energy of the composites what is more prone when the low content of polypropylene is present. The recovery of tensile strength and elongation at break occurs and those properties reach the highest value at about 6% of CaCO3. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers
- 22 January 2008
- Published by Wiley in Polymer Engineering & Science
- Vol. 48 (3) , 572-577
Properties of recycled material containing poly(vinyl chloride), polypropylene, and calcium carbonate nanofiller
Even at low content, polypropylene significantly worsens mechanical properties of the recycled PVC composite, i.e. tensile strength at break and elongation at break. But, if small quantities of surface modified nanofiller calcium carbonate is added, an applicable composite that contains 10–30% of waste material can be made. It was determined that nanosized calcium carbonate lowers melting point of polypropylene, perhaps by changing its crystalline form and has no influence on thermooxidative degradation of poly(vinyl chloride). Addition of nanofiller slightly lowers the surface free energy of the composites what is more prone when the low content of polypropylene is present. The recovery of tensile strength and elongation at break occurs and those properties reach the highest value at about 6% of CaCO3. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers
- 17 February 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 100 (3) , 2158-2163
Miscibility and thermooxidative degradation of poly(vinyl chloride)/biodegradable aliphatic–aromatic copolyester blends
- 17 February 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 100 (3) , 2158-2163
Miscibility and thermooxidative degradation of poly(vinyl chloride)/biodegradable aliphatic–aromatic copolyester blends
- 31 December 2003
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 79 (2) , 265-270
Kinetic analysis of the thermooxidative degradation of poly(vinyl-chloride) in poly(vinyl chloride)/methyl methacrylate–butadiene–styrene blends 2. Nonisothermal degradation
- 31 December 2003
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 79 (2) , 265-270
Kinetic analysis of the thermooxidative degradation of poly(vinyl-chloride) in poly(vinyl chloride)/methyl methacrylate–butadiene–styrene blends 2. Nonisothermal degradation