HTHeidi Rose Thornton

Heidi Rose Thornton

*This is an algorithmically generated author record based on publicly available information.

Heidi Rose Thornton has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A GNSS-based method to define athlete manoeuvrability in field-based team sports

    by Grant Malcolm Duthie, Sam Robertson, Heidi Rose Thornton

    This study presented a method of quantifying the manoeuvrability of two field-based team sport athletes and investigated its relationship with running velocity during competition. Across a season, 10 Hz Global navigation satellite system (GNSS) devices were worn during matches by 62 athletes (Australian Football League [AFL]; n = 36, 17 matches, National Rugby League [NRL]; n = 26, 21 matches). To quantify manoeuvrability, tortuosity was calculated from the X and Y coordinates from match GNSS files (converted from latitude and longitude). Tortuosity was calculated as 100 x natural logarithm of the chord distance (distance travelled between X and Y coordinates), divided by the straight-line distance. The maximal tortuosity was then quantified for each 0.5 m∙s-1 speed increment, ranging from 0 to the highest value for each game file. A quadratic model was fitted for each match file, controlling for the curvilinear relationship between tortuosity and velocity. A comparison of the quadratic coefficients between sports, and within sport between positions was investigated using linear mixed models. Resulting standard deviations (SDs) and mean differences were then assessed to establish standardized effect sizes (ES) and 90% confidence intervals (CI). A curvilinear relationship exists between maximal tortuosity and running speed, reflecting that as speed increases, athletes’ ability to deviate from a linear path is compromised (i.e., run in a more linear path). Compared to AFL, NRL had a greater negative quadratic coefficient (a) (ES = 0.70; 0.47 to 0.93) for the 5 second analysis, meaning that as speed increased, NRL athletes’ manoeuvrability reduced at a faster rate than when compared to AFL. There were no positional differences within each sport. GNSS derived information can be used to provide a measure of manoeuvrability tortuosity during NRL and AFL matches. The curvilinear relationship between tortuosity and speed demonstrated that as speed increased, manoeuvrability was compromised.


  • Open Access

    Preparing for an Australian Football League Women's League Season

    by Heidi Rose Thornton, Cameron R. Armstrong, Alex Rigby, Clare L. Minahan, Rich D. Johnston, Grant Malcolm Duthie

    The aims were to investigate the externally measured weekly loads, and the distribution intensity relative to the 1-min maximal mean (MM) intensity of matches. Athletes (n = 28) wore 10 Hz GNSS devices during training and matches. For the descriptive analysis, a range of movement variables were collected, including total distance, high-speed distance, very high-speed distance, acceleration, and acceleration load. Using raw GNSS files, 1-min moving averages were calculated for speed (m·min−1) and acceleration (m·s−2), and were multiplied by time, specifying total distance (m), and by body mass to quantify impulse (kN·s−1). The distribution of distance and impulse accumulated at varied intensities relative to MMs was calculated, with percentages ranging from zero to 110%. Drills were categorized as either; warm-ups, skill drills, games (i.e., small-sided games), conditioning and matches. Linear mixed models determined if the distribution of intensity within each threshold (>50%) varied between drill types and matches, and if the distribution within drill types varied across the season. Effects were described using standardized effect sizes (ES) and 90% confidence limits (CL). Compared to matches, a higher proportion of distance was accumulated at 50% of the MM within warm-ups and conditioning (ES range 0.86–1.14). During matches a higher proportion of distance was accumulated at 60% of MM when compared to warms ups, skill drills and conditioning (0.73–1.87). Similarly, greater proportion of distance was accumulated between 70 and 100% MM in matches compared to skill drills and warm-ups (1.05–3.93). For impulse, matches had a higher proportion between 60 and 80% of the MM compared to conditioning drills (0.91–3.23). There were no other substantial differences in the proportion of impulse between matches and drill types. When comparing phases, during competition there was a higher proportion of distance accumulated at 50% MM than general preparation (1.08). A higher proportion of distance was covered at higher intensities within matches compared to drills. The proportion of impulse was higher between 60 and 80% MM within matches compared to conditioning. Practitioners can therefore ensure athletes are not only exposed to the intensities common within competition, but also the volume accumulated is comparable, which may have positive performance outcomes, but is also extremely important in the return to play process.


  • Relationship Between Physical Performance Testing Results and Peak Running Intensity During Professional Rugby League Match Play

    by Grant M. Duthie, Heidi R. Thornton, Jace A. Delaney, James T. McMahon, Dean T. Benton

    Duthie, GM, Thornton, HR, Delaney, JA, McMahon, JT, and Benton, DT. Relationship between physical performance testing results and peak running intensity during professional rugby league match play. J Strength Cond Res 34(12): 3506–3513, 2020—The purpose of this study was to examine the relationship between individual athletes' physical characteristics and both the peak running intensities and the decline in peak running intensities during competition. Twenty-two professional rugby league athletes (age; 24.1 ± 4.0 years, body mass; 101.4 ± 9.5 kg) underwent a series of physical testing procedures. Peak running intensity was determined using a moving average technique, applied to the speed (m·min−1), acceleration/deceleration (m·s−2), and metabolic power (W·kg−1) during competition, across 10 different durations. The power law relationship was then established, yielding an intercept and slope for the movement variables. Mixed linear models were then used to determine the relationship between physical characteristics and intercept and slope values. There were large, positive relationships between a player's maximal speed and both peak running speeds (effect size = 0.56, 90% confidence interval: 0.20–0.78) and metabolic power (0.57, 0.21–0.79) during competition. By contrast, there were large, negative associations between maximal speed and the rate of decline in running speed (−0.60, −0.81 to −0.27) and metabolic power (−0.65, −0.83 to −0.32) during competition. Similarly, there were negative associations between relative squat strength and the rate of decline in running speed (moderate: −0.41, −0.69 to −0.04) and metabolic power (large: −0.53, −0.77 to −0.17) during competition. The findings of this study demonstrate that a players running intensity during competition is underpinned by the individual athletes physiological qualities. Athletes demonstrating higher maximal speeds in testing were able to maintain higher running intensities over short durations but had a greater decrease in running intensity as duration increased.


  • Quantifying the Movement Characteristics of Australian Football League Women's Competition

    by Heidi R. Thornton, Cameron R. Armstrong, Tiernan Gamble, Alex Rigby, Rich D. Johnston, Grant M. Duthie

    Thornton, HR, Armstrong, CR, Gamble, T, Rigby, A, Johnston, RD, and Duthie, GM. Quantifying the movement characteristics of Australian Football League Women's competition. J Strength Cond Res 36(12): 3415–3421, 2022—The purpose is to provide an overview of the externally measured movement characteristics of Australian Football League Women's (AFLW) competition, and the variability in this between matches. A range of movement variables were measured from 28 athletes who wore 10-Hz global positioning system devices during games and were summarized according to positional groups. The variance in each athlete's match loads for each round were expressed using standardized scores (z-scores), and the change compared with the first game played was calculated and expressed as a standard deviation. Furthermore, using the raw export, moving means (1–10 minutes) of speed (m·min−1) and acceleration (m·s−2) were calculated. Following log transformation of the maximal means, intercept and slopes were calculated. Linear mixed models identified differences between positional groups for match loads, and intercept and slopes. Effects were described using standardized effect sizes (ESs) and magnitude-based decisions. There were no substantial and unclear differences between positional groups for match loads (ES range; ±confidence limits = 0.10–0.80; ±0.30–4.30) and for intercept and slopes (ES range; 0.04–0.44; ±0.52–2.11). Large within-athlete variation in match demands between rounds was observed (z-score up to −1.8 SD for distance), and the maximal means for speed and acceleration demonstrate the extensive physical demands of AFLW competition. These data describe the intense and variable physical demands of AFLW competition, and further provide novel information regarding the maximal mean intensities and intercept and slopes, which should assist practitioners in planning and prescribing training in preparation for competition.


  • DXA‐derived estimates of energy balance and its relationship with changes in body composition across a season in team sport athletes

    by Jonathan D. Bartlett, Malcolm Hatfield, Ben B. Parker, Llion A. Roberts, Clare Minahan, James P. Morton, Heidi R. Thornton

    This study examined the relationship between dual‐energy x‐ray absorptiometry (DXA)‐derived estimates of energy balance (EB) and changes in body composition across various seasonal phases in team sport athletes. Forty‐five Australian rules footballers underwent six DXA scans across a 12‐month period (off‐season [OS, Week 0–13], early [PS1, Week 13–22] and late pre‐season [PS2, Week 22–31] and early [IS1, Week 3–42] and late in‐season [IS2, Week 42–51]). EB (kcal·day−1) was estimated from changes in fat free soft tissue mass (FFSTM) and fat mass (FM) between scans according to a validated formula. An EB threshold of ± 123 kcal·day−1 for >60 days demonstrated a very likely (>95% probability) change in FFSTM (>1.0 kg) and FM (>0.7 kg). There were small to almost perfect relationships between EB and changes in FM (r = 0.97, 95% CI, 0.96–0.98), FFSTM (r = −0.41, −0.92 to −0.52) and body mass (r = 0.27, 0.14–0.40). EB was lowest during PS1 compared to all other phases (range, −265 to −142 kcal·day−1), with no other changes at any time. Increases in FFSTM were higher during OS compared to PS2 (1.6 ± 0.4 kg), and higher during PS1 compared to PS2, IS1, and IS2 (range, 1.6–2.1 kg). There were no changes during in‐season (−0.1–0.05 kg). FM decreased only in PS1 compared to all other seasonal phases (−1.8 to −1.0 kg). Assessments of body composition can be used as a tool to estimate EB, which practically can be used to indicate athlete's training and nutrition behaviours/practices.


  • Developing Athlete Monitoring Systems in Team Sports: Data Analysis and Visualization

    by Heidi R. Thornton, Jace A. Delaney, Grant M. Duthie, Ben J. Dascombe

    In professional team sports, the collection and analysis of athlete-monitoring data are common practice, with the aim of assessing fatigue and subsequent adaptation responses, examining performance potential, and minimizing the risk of injury and/or illness. Athlete-monitoring systems should be underpinned by appropriate data analysis and interpretation, to enable the rapid reporting of simple and scientifically valid feedback. Using the correct scientific and statistical approaches can improve the confidence of decisions made from athlete-monitoring data. However, little research has discussed and proposed an outline of the process involved in the planning, development, analysis, and interpretation of athlete-monitoring systems. This review discusses a range of methods often employed to analyze athlete-monitoring data to facilitate and inform decision-making processes. There is a wide range of analytical methods and tools that practitioners may employ in athlete-monitoring systems, as well as several factors that should be considered when collecting these data, methods of determining meaningful changes, and various data-visualization approaches. Underpinning a successful athlete-monitoring system is the ability of practitioners to communicate and present important information to coaches, ultimately resulting in enhanced athletic performance.


  • The Validity of a Global Navigation Satellite System for Quantifying Small-Area Team-Sport Movements

    by Jace A. Delaney, Taylor M. Wileman, Nicholas J. Perry, Heidi R. Thornton, Mark P. Moresi, Grant M. Duthie

    Delaney, JA, Wileman, TM, Perry, NJ, Thornton, HR, Moresi, MP, and Duthie, GM. The validity of a global navigation satellite system for quantifying small-area team-sport movements. J Strength Cond Res 33(6): 1463–1466, 2019—The recent development of global navigation satellite systems (GNSS) has improved the availability and signal strength of surrounding satellites compared with traditional global positioning systems, although their ability to quantify rapid changes in speed may still be limited. This study aimed to evaluate the validity of GNSS to quantify the mean speed (m·s−1) and acceleration (m·s−2) of movements typical to team sports. One participant completed 9 periods of 4 minutes of activity, separated by 2-minute rest periods, which involved walking, jogging, and running in a variety of directions and patterns, aimed to simulate a team-sport movement profile. Speed and acceleration were quantified from a 10-Hz GNSS unit and compared with a 10-camera, 3-dimensional motion capture system (VICON), from which the movement of both the participant's center of mass (COM) and the location of the GNSS unit (e.g., C7 vertebrae) were calculated. Practical estimates of speed were associated with small differences from both the criterion COM (effect size; ±90% confidence limits = 0.19–0.25; ± ∼0.21) and criterion C7 (0.14–0.22; ± ∼0.13). The corresponding estimates of acceleration derived from raw data were classified as small (0.16–0.22; ± ∼0.15) and small to moderate (0.25–0.35; ± ∼0.24) for the COM and C7, respectively. Software-exported acceleration values exhibited very large mean bias compared with both criterion measures (−3.81 to −3.77; ± ∼0.24). This study demonstrates that 10-Hz GNSS possess acceptable validity for assessing the average demands of movements typical of team-sports training and competition, although caution is recommended when using software-exported measures of acceleration.


  • Importance, Reliability, and Usefulness of Acceleration Measures in Team Sports

    by Jace A. Delaney, Cloe J. Cummins, Heidi R. Thornton, Grant M. Duthie

    Delaney, JA, Cummins, CJ, Thornton, HR, and Duthie, GM. Importance, reliability and usefulness of acceleration measures in team sports. J Strength Cond Res 32(12): 3494–3502, 2018—The ability to accelerate, decelerate, and change direction efficiently is imperative to successful team sports performance. Traditional intensity-based thresholds for acceleration and deceleration may be inappropriate for time-series data and have been shown to exhibit poor reliability, suggesting other techniques may be preferable. This study assessed movement data from one professional rugby league team throughout 2 full seasons and 1 preseason period. Using both 5 and 10 Hz global positioning systems (GPS) units, a range of acceleration-based variables were evaluated for their interunit reliability, ability to discriminate between positions, and associations with perceived muscle soreness. The reliability of 5 Hz global positioning systems for measuring acceleration and deceleration ranged from good to poor (CV = 3.7–27.1%), with the exception of high-intensity deceleration efforts (CV = 11.1–11.8%), the 10 Hz units exhibited moderate-to-good interunit reliability (CV = 1.2–6.9%). Reliability of average metrics (average acceleration/deceleration, average acceleration, and average deceleration) ranged from good to moderate (CV = 1.2–6.5%). Substantial differences were detected between positions using time spent accelerating and decelerating for all magnitudes, but these differences were less clear when considering the count or distance above acceleration/deceleration thresholds. All average metrics detected substantial differences between positions. All measures were similarly related to perceived muscle soreness, with the exception of high-intensity acceleration and deceleration counts. This study has proposed that averaging the acceleration/deceleration demands over an activity may be a more appropriate method compared with threshold-based methods, because a greater reliability between units, while not sacrificing sensitivity to within-subject and between-subject changes.


  • Open Access

    The Quantification of Within-Week Session Intensity, Duration, and Intensity Distribution Across a Season in Australian Football Using the Session Rating of Perceived Exertion Method

    by Farhan Juhari, Dean M. Ritchie, Fergus O’Connor, Nathan Pitchford, Matthew Weston, Heidi R. Thornton, Jonathan D. Bartlett Bartlett

    Context: Team-sport training requires the daily manipulation of intensity, duration, and frequency, with preseason training focusing on meeting the demands of in-season competition and training on maintaining fitness. Purpose: To provide information about daily training in Australian football (AF), this study aimed to quantify session intensity, duration, and intensity distribution across different stages of an entire season. Methods: Intensity (session ratings of perceived exertion; CR-10 scale) and duration were collected from 45 professional male AF players for every training session and game. Each session's rating of perceived exertion was categorized into a corresponding intensity zone, low (= 4.0 and = 7.0), to categorize session intensity. Linear mixed models were constructed to estimate session duration, intensity, and distribution between the 3 preseason and 4 in-season periods. Effects were assessed using linear mixed models and magnitude-based inferences. Results: The distribution of the mean session intensity across the season was 29% low intensity, 57% moderate intensity, and 14% high intensity. While 96% of games were high intensity, 44% and 49% of skills training sessions were low intensity and moderate intensity, respectively. Running had the highest proportion of high-intensity training sessions (27%). Preseason displayed higher training-session intensity (effect size [ES] = 0.29-0.91) and duration (ES = 0.33-1.44), while in-season game intensity (ES = 0.31-0.51) and duration (ES = 0.51-0.82) were higher. Conclusions: By using a cost-effective monitoring tool, this study provides information about the intensity, duration, and intensity distribution of all training types across different phases of a season, thus allowing a greater understanding of the training and competition demands of Australian footballers.