KMKathleen M. Macek-Rowland

Kathleen M. Macek-Rowland

*This is an algorithmically generated author record based on publicly available information.

Kathleen M. Macek-Rowland has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Potential effects of energy development on environmental resources of the Williston Basin in Montana, North Dakota, and South Dakota—Water resources

    by Timothy T. Bartos, Steven K. Sando, Todd M. Preston, Gregory C. Delzer, Robert F. Lundgren, Rochelle A. Nustad, Rodney R. Caldwell, Zell E. Peterman, Bruce D. Smith, Kathleen M. Macek-Rowland, et al.

    The Williston Basin has been a leading oil and gas producing area for more than 50 years. While oil production initially peaked within the Williston Basin in the mid-1980s, production rapidly increased in the mid-2000s, largely because of improved horizontal (directional) drilling and hydraulic fracturing methods. In 2012, energy development associated with the Bakken Formation was identified as a priority requiring collaboration toward improved timeliness of issuing permits for new wells combined with reasonable measures to maintain environmental quality. Shortly thereafter, the Bakken Federal Executive Group was created to address common challenges associated with energy development. The Bakken Federal Executive Group partner agencies identified a gap in current understanding of the cumulative environmental challenges attributed to energy development throughout the area, resulting in an effort to aggregate scientific data and identify additional research and information needs related to natural resources within areas of energy development in the Williston Basin. As part of this effort, water resources in the area (including groundwater; streams and rivers; and lakes, reservoirs, and wetlands) were characterized and described in terms of physical occurrence, flow characteristics, recharge, water quality, and water use. Similarly, waters produced during energy-development activities also were characterized even though these waters are not considered usable resources within the area. Groundwater resources were characterized by the major hydrogeologic units, or aquifers, identifying the units that supply most groundwater used for domestic, stock, agricultural, and industrial purposes. The groundwater characterization included other deeper hydrogeologic units in the Williston Basin that may be a useable source of water with treatment, have utility as a reservoir for reinjection of produced waters, or be a source of minerals and energy resources. A generalized groundwater budget and flow system identifying the sources of recharge (stream infiltration, precipitation, and movement [leakage] from other aquifers) and the general groundwater flow direction is included for each of the major hydrogeologic units. Rivers and streams within the Williston Basin with 10 or more years of continuous streamflow data were identified. For a subset of these sites, streamflow characteristics, including the monthly and annual mean flow, were generated to identify seasonal and interannual changes in streamflow and thus provide information on the drivers and reliability of streamflow at the seasonal or multiyear scale. Daily streamflow and annual extreme flows (peak and low flow) also were estimated for the subset of sites. The daily streamflow and annual extreme flow values provide information on short-term or extreme events that are relevant to infrastructure design and evaluating spills, leaks, or accidental discharges of water or petroleum products. Surface-water features (lakes, ponds, and wetlands) were classified using the Cowardin system and identified on the National Wetlands Inventory maps generated by the U.S. Fish and Wildlife Service. The spatial distribution of the surface-water features was analyzed by State, county, and specifically in comparison to the Prairie Pothole Region. The proximity of the surface-water features to energy development infrastructure (specifically oil or gas well pads) was evaluated. It was determined that, although oil or gas wells are often near a surface-water feature, most surface-water features do not have wells nearby, with the exception of wells in the Prairie Pothole Region. Water-quality data were aggregated from two data sources: (1) the Water-Quality Portal, sponsored by the U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (EPA), and National Water Quality Monitoring Council; and (2) a data compilation completed as part of the USGS National Water-Quality Assessment project. The Water-Quality Portal integrates publicly available water-quality data from databases maintained by the USGS, EPA, and U.S. Department of Agriculture, including water-quality data from Tribal, State, and local databases. Water-quality data for 15 commonly measured water-quality constituents were aggregated for groundwater, rivers and streams, and lakes and reservoirs. For each aggregated dataset (groundwater, rivers and streams, and lakes and reservoirs), analyses of the water-quality data included summary statistics, maps of spatial distribution of constituent values, boxplots of constituent values by timeframe or hydrogeologic unit, spatial comparisons of site locations and constituent values to petroleum well density, and comparisons of the constituent values measured to EPA drinking-water standards/guidelines. Produced water includes all fluids brought to the surface along with the targeted hydrocarbons as part of the oil and gas exploration and extraction processes. These fluids may include formation water (waters that co-exist with rock/oil/gas), hydraulic fracturing fluids, and other combinations of water and chemicals used during oil and gas well drilling, development, treatments, recompletions, and workovers. Produced water datasets were aggregated from two sources: the USGS National Produced Waters Geochemical database (ver. 2.1) and a series of projects focused specifically on sampling produced water in the Williston Basin from 2010 to 2014. The National Produced Waters Geochemical database was useful for a general understanding of produced-water chemistry. Produced waters are characterized by extreme salinity and contain elevated concentrations of other constituents (including arsenic, barium, cadmium, lead, zinc, radium-226/radium-228, and ammonia) that could negatively affect water and aquatic resources if released. Produced waters also have a generally unique chemical (isotopic) signature that may be useful in tracking water from different geologic...


  • Open Access

    Estimates of water use associated with continuous oil and gas development in the Williston Basin, North Dakota and Montana, 2007–17

    by Ryan R. McShane, Theodore B. Barnhart, Joshua F. Valder, Seth S. Haines, Kathleen M. Macek-Rowland, Janet M. Carter, Gregory C. Delzer, Joanna N. Thamke

    This study of water use associated with development of continuous oil and gas resources in the Williston Basin is intended to provide a preliminary model-based analysis of water use in major regions of production of continuous oil and gas resources in the United States. Direct, indirect, and ancillary water use associated with development of continuous oil and gas resources in the Williston Basin was estimated in North Dakota and Montana from 2007 to 2017. Water-use data were aggregated by county and year, which were the sampling units used in this analysis. Linear and quantile regression models of water use in relation to the number of oil and gas wells developed were fit for the direct, indirect, and ancillary water-use categories for each State. A 95-percent confidence interval for each parameter estimate from the linear regression models was computed as a measure of uncertainty. Additional information on uncertainty can be gained from modeling other distribution parameters, so quantile regression models of the 5th, 50th, and 95th percentiles also were fit. To assess uncertainty in the estimates from the regression models of direct, indirect, and ancillary water use, leave-one-out cross-validation was used. Model performance was evaluated with three goodness-of-fit metrics used to compare the estimates and observations of water use.Mean annual direct and indirect water use for development of continuous oil and gas resources in North Dakota was estimated at 4,512 million gallons (Mgal) per year (Mgal/yr), with a 95-percent confidence interval of 4,021–5,152 Mgal/yr, and in Montana was estimated at 196 Mgal/yr, with a 95-percent confidence interval of 189–203 Mgal/yr. Ancillary water use (for domestic and public supply) had an estimated annual mean of 2,753 Mgal/yr in North Dakota and 396 Mgal/yr in Montana. The coefficient from the linear regression model of direct water use was 3.86 Mgal per well and hydraulic fracturing water use was 3.70 Mgal per well for North Dakota. The mean estimate of direct water use had a 95-percent confidence interval of 3.48–4.23 Mgal per well. For North Dakota, the coefficient from the linear regression model of indirect water use was 0.453 Mgal per well, with a 95-percent confidence interval of 0.415–0.492 Mgal per well. Direct and indirect water use had a mean estimate of about 4.31 Mgal per well in North Dakota. The mean estimate of ancillary water use (for domestic and public supply) in North Dakota was 2.03 Mgal per well, with a 95-percent confidence interval of 1.76–2.31 Mgal per well. For Montana, the linear regression model of hydraulic fracturing water use had a mean estimate of 2.04 Mgal per well. The 95-percent confidence interval for the mean estimate was 1.80–2.28 Mgal per well. Direct and indirect water use in Montana had a mean estimate of 2.49 Mgal per well. The mean estimate of ancillary water use (for domestic and public supply) in Montana was 2.43 Mgal per well, with a 95-percent confidence interval of 1.76–3.11 Mgal per well.


  • Analytical framework to estimate water use associated with continuous oil and gas development

    by Joshua F. Valder, Ryan R. McShane, Theodore B. Barnhart, Spencer L. Wheeling, Janet M. Carter, Kathleen M. Macek-Rowland, Gregory C. Delzer, Joanna N. Thamke

    An analytical framework was designed to estimate water use associated with continuous oil and gas (COG) development in support of the U.S. Geological Survey Water Availability and Use Science Program. This framework was developed to better understand the relation between the production of COG resources for energy and the amount of water needed to sustain this type of energy development in the United States. The total mean undiscovered, technically recoverable volume of COG has increased, highlighting the continued need to develop approaches to better characterize water use associated with COG development.The analytical framework can be used to estimate water use associated with COG development for three water-use components—direct, indirect, and ancillary water use—that are related to the life cycle of COG development. Direct water use is defined as water used in a wellbore to complete a well, including the water used for drilling, cementing, stimulating, and maintaining the well during production. Indirect water use is the water used at or near the well site, including water used for dust abatement, for cleaning equipment, and for crew and staff use. Ancillary water use is all other water used during the life cycle of COG development that is not categorized as direct or indirect, such as additional local or regional water use resulting from a change (for example, population) related to COG development. The analytical framework includes the data inputs, the processes involved in estimating the water-use coefficients and analyzing their uncertainties, and the outputs. The analytical framework was developed as an R script, which contains the statistical models used to estimate water-use components.The availability of data across COG reservoirs in the United States is variable and presents challenges for estimating water use for extracting COG from their reservoirs; thus, the R script can be modified for the types of data available within a COG reservoir, the extent and resolution of data available for each water-use component, and the desired output of the water-use assessment. The script was written so that the units of the data in the script were standardized. Water-use estimates were simulated for the mean and 10th, 50th, and 90th percentiles of the data distributions. Uncertainties were quantified with confidence intervals for the estimated coefficients. Uncertainty for estimated or simulated data can be calculated with the R script by providing a range of representative values that are within the appropriate confidence intervals of the mean of the data.


  • U.S. Geological Survey (USGS) water-use websites

    by Kimberly Shaffer, Kathleen M. Rowland, B. Pierre Sargent

  • Open Access

    User’s Manual for the National Water Information System of the U.S. Geological Survey: Aggregate Water-Use Data System, Version 3.2

    by John P. Nawyn, B. Pierre Sargent, Barbara Hoopes, Todd Augenstein, Kathleen M. Rowland, Nancy L. Barber

    The Aggregate Water-Use Data System (AWUDS) is the database management system used to enter, store, and analyze state aggregate water-use data. It is part of the U.S. Geological Survey National Water Information System. AWUDS has a graphical user interface that facilitates data entry, revision, review, and approval. This document provides information on the basic functions of AWUDS and the steps for carrying out common tasks that are a part of compiling an aggregated dataset. Also included are explanations of terminology and descriptions of user-interface structure, procedures for using the AWUDS operations, and dataset-naming conventions. Information on water-use category definitions, data-collection methods, and data sources are found in the report “Guidelines for preparation of State water-use estimates,” available at https:///publication/ofr20171029.

  • Open Access

    Estimating national water use associated with unconventional oil and gas development

    by Janet M. Carter, Kathleen M. Macek-Rowland, Joanna N. Thamke, Gregory C. Delzer

    The U.S. Geological Survey’s (USGS) Water Availability and Use Science Program (WAUSP) goals are to provide a more accurate assessment of the status of the water resources of the United States and assist in the determination of the quantity and quality of water that is available for beneficial uses. These assessments would identify long-term trends or changes in water availability since the 1950s in the United States and help to develop the basis for an improved ability to forecast water avail- ability for future economic, energy-production, and environmental uses. The National Water Census (http://water.usgs.gov/watercensus/), a research program of the WAUSP, supports studies to develop new water accounting tools and assess water availability at the regional and national scales. Studies supported by this program target focus areas with identified water availability concerns and topical science themes related to the use of water within a specific type of environmental setting. The topical study described in this fact sheet will focus on understanding the relation between production of unconventional oil and gas (UOG) for energy and the water needed to produce and sustain this type of energy development. This relation applies to the life-cycle of renewable and nonrenewable forms of UOG energy and includes extraction, production, refinement, delivery, and disposal of waste byproducts. Water-use data and models derived from this topical study will be applied to other similar oil and gas plays within the United States to help resource managers assess and account for water used or needed in these areas. Additionally, the results from this topical study will be used to further refine the methods used in compiling water-use data for selected categories (for example, mining, domestic self-supplied, public supply, and wastewater) in the USGS’s 5-year national water-use estimates reports (http://water.usgs.gov/watuse/).