Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rajeswari Balasubramaniam has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Impact on Triple/N-Way Collocation-Based Validation of Remote Sensing Products Due to Non-Ideal Error Statistics

    by Rajeswari Balasubramaniam, Christopher Ruf

    Triple/N-way collocation is a statistical analysis tool used to estimate the individual error variances of simultaneous observations of a physical quantity by three or more distinct systems. The tool is widely used to validate remote sensing data products such as ocean surface winds and soil moisture retrieved by satellite sensors, where simultaneous observations by different systems are common. However, the method relies on several assumptions about the statistical properties of the observations that are not always valid in a real-world scenario. We test the validity of these assumptions using a numerical simulator and assess their impact on error variance estimates. Some of these assumptions, that the errors are uncorrelated between observing systems or the reference system having a non-unity scaling factor, etc., are found to have a large impact on estimates of error variance when violated. The violation of some other assumptions is found to be less impactful. The simulator also provides corrections to the erroneous estimates of error variances that result when the underlying assumptions are violated. Additionally, we present a new, more general version of the collocation analysis tool that accommodates cases where the error variance in an observing system has a dependence on the true signal.


  • Open Access

    Characterization of CYGNSS Ocean Surface Wind Speed Products

    by Christopher Ruf, Mohammad Al-Khaldi, Shakeel Asharaf, Rajeswari Balasubramaniam, Darren McKague, Daniel Pascual, Anthony Russel, Dorina Twigg, April Warnock

    Since its launch in 2016, a number of wind speed retrieval algorithms have been developed for the NASA CYGNSS satellite observations. We assess their accuracy and precision and characterize the dependence of their performance on environmental factors. The dependence of retrieval uncertainty on the wind speed itself is considered. The triple colocation method of validation is used to correct for the quality of the reference wind speed products with which CYGNSS is compared. The dependence of retrieval performance on sea state is also considered, with particular attention being paid to the long wave portion of the surface roughness spectrum that is less closely coupled to the instantaneous local wind speed than the capillary wave portion of the spectrum. The dependence is found to be significant, and the efficacy of the approaches taken to account for it is examined. The dependence of retrieval accuracy on wind speed persistence (the change in wind speed prior to a measurement) is also characterized and is found to be significant when winds have increased markedly in the ~2 h preceding an observation.


  • Open Access

    CYGNSS Level 3 Merged Wind Speed Data Product for Storm Force and Surrounding Environmental Winds

    by April M. Warnock, Christopher S. Ruf, Anthony Russel, Mohammad M. Al-Khaldi, Rajeswari Balasubramaniam

    A new wind speed product has been developed using bistatic radar data from NASA's Cyclone Global Navigation Satellite System (CYGNSS) mission. The product addresses short-comings in two existing CYGNSS gridded wind speed products, the L3 Gridded Fully Developed Seas (FDS) Wind Speeds and the L3 Storm-Centric Gridded products, which individually are optimized for global, non-storm conditions and localized, high wind speed tropical cyclone conditions, respectively. In order to create a unified gridded wind speed product that captures both the storm force winds and the far-field environmental wind speeds, wind fields from the two products are merged onto a common grid. The algorithm produces global (+/- 40o latitude) windspeeds, averaged over a +/-6 hour window, and reported on a 0.1x0.1o grid. Gridded wind speeds are reported every 6 hours for each tropical cyclone when there are overpasses available during that time interval. The files are output on a storm-by-storm basis. Quadrant-dependent tropical cyclone 34-knot wind radii are estimated from the merged wind fields and included in the dataset. The performance of the merged wind speed product is validated against HWRF model output and SMAP tropical cyclone wind products, and the temporal and spatial sampling of the dataset is characterized. The dataset is found to exceed current temporal coverage capabilities compared to other existing tropical cyclone wind speed remote sensing instruments, although limitations on high wind speed retrievals and variable spatial coverage are notable and can be attributed to weaknesses of the underlying GNSS-R modality.


  • Open Access

    Development and Application of a GNSS-R Error Model for Hurricane Winds

    by Rajeswari Balasubramaniam, Christopher S. Ruf

    A parametric error model is developed to represent the uncertainty in retrieval of hurricane force wind speed by a space borne GNSS-R instrument. The functional form of the model is constructed based on a bottom-up consideration of the primary contributing sources of uncertainty. Scaling parameters in the model are tuned in a top-down manner using a large population of wind speed retrievals by the CYGNSS satellite which are co-located in space and time with HWRF reanalysis hurricane winds in the North Atlantic during 2018-2022. The root mean squared difference between CYGNSS and HWRF winds is found to depend on a number of variables, two of which are wind speed and receive antenna gain. The parametrized error model represents these dependencies. The model can be used as a design tool to predict expected performance as a function of instrument design. In particular, the model predicts the antenna gain required to achieve a particular level of wind speed uncertainty at a particular wind speed. A case study is considered in which a receive antenna gain of at least 20 dBi is found to be required to reliably distinguish between a Category 4 and Category 5 hurricane. This has implications for the optimal design of a future GNSS-R instrument intended for hurricane observations.


  • Using Synthetic Cyclone Models for High Wind GNSS-R Calibration, Validation, and Algorithm Development: A CYGNSS Case Study

    by Mohammad M. Al-Khaldi, Scott Gleason, Joel T. Johnson, Rajeswari Balasubramaniam, Christopher S. Ruf, Darren S. McKague, Bachir Annane, Tianlin Wang, Anthony Russel, Dorina Twigg

    This work reports a case study of the use of synthetic cyclone models for the development, assessment and validation of GNSS-R wind speed remote sensing algorithms using a CYGNSS data record extending from August 1st, 2018 to December 31st, 2022. Synthetic cyclone models are shown to be useful in assessing the high wind speed sensitivity of CYGNSS’s v1.0, v2.1, v3.0, v3.1, and future v3.2 normalized bistatic radar cross section (NBRCS) products due to the extended matchup dataset of high wind speed information that is obtained. The models are also shown useful in investigating the impacts of specific error corrections terms and in the development of Level-2 geophysical model functions for the retrieval of ocean surface winds.


  • Open Access

    A pilot study on assessing the effect of climate on the incidence of vector borne disease at Pune and Pimpri-Chinchwad area, Maharashtra

    by Somenath Dutta, R. Balasubramaniam, Mahendra Jagtap, Pradeep Awate, Nahush Kulkarni, Mohammed Danish, S. Deshpande, U. Satpute, R. Wayal, P. Bhagbat, et al.


  • Open Access

    Neural Network Based Quality Control of CYGNSS Wind Retrieval

    by Rajeswari Balasubramaniam, Christopher Ruf

    Global Navigation Satellite System – Reflectometry (GNSS-R) is a relatively new field in remote sensing that uses reflected GPS signals from the Earth’s surface to study the state of the surface geophysical parameters under observation. The CYGNSS is a first of its kind GNSS-R constellation mission launched in December 2016. It aims at providing high quality global scale GNSS-R measurements that can reliably be used for ocean science applications such as the study of ocean wind speed dynamics, tropical cyclone genesis, coupled ocean wave modelling, and assimilation into Numerical Weather Prediction models. To achieve this goal, strong quality control filters are needed to detect and remove outlier measurements. Currently, quality control of CYGNSS data products are based on fixed thresholds on various engineering, instrument, and measurement conditions. In this work we develop a Neural Network based quality control filter for automated outlier detection of CYGNSS retrieved winds. The primary merit of the proposed ML filter is its ability to better account for interactions between the individual engineering, instrument and measurement conditions than can separate thresholded flags for each one. Use of Machine Learning capabilities to capture inherent patterns in the data can create an efficient and effective mechanism to detect and remove outlier measurements. The resulting filter has a probability of outlier detection (PD) >75% and False Alarm Rate (FAR) < 20% for a wind speed range of 5 to 18 m/s. At least 75% of the outliers with wind speed errors of at least 5 m/s are removed while ~100% of the outliers with wind speed errors of at least 10 m/s are removed. This filter significantly improves data quality. The standard deviation of wind speed retrieval error is reduced from 2.6 m/s without the filter to 1.7 m/s with it over a wind speed range of 0 to 25 m/s. The design space for this filter is also analyzed in this work to characterize trade-offs between PD and FAR. Currently the filter performance is applicable only up to moderate wind speeds, as sufficient data is available only in this range to train the filter, as a way forward, more data over time can help expand the usability of this filter to higher wind speed ranges as well.


  • Open Access

    Azimuthal Dependence of GNSS‐R Scattering Cross‐Section in Hurricanes

    by Rajeswari Balasubramaniam, Christopher Ruf

    Global Navigation Satellite System‐Reflectometry (GNSS‐R) measurements of the ocean surface are sensitive to roughness scales ranging from a few cms to several kms. Inside a hurricane the surface roughness changes drastically due to varying sea age and fetch length conditions and complex wave‐wave interactions caused by its cyclonic rotation and translational motion. As a result, the relationship between the surface roughness at different scale sizes becomes azimuthally dependent, as does the relationship between scattering cross‐section and wind speed as represented by a Geophysical Model Function (GMF). In this work, the impact of this azimuthal variation on the scattering cross‐section is assessed. An empirical GMF is constructed using measurements by the NASA CYclone GNSS (CYGNSS) matched to HWRF reanalysis surface winds for 19 hurricanes in 2017 and 2018. The analysis reveals a 2–8% variation in scattering cross‐section due to azimuthal location, and the magnitude of the azimuthal dependence is found to grow with wind speed.


  • Top Cited Papers
    Open Access

    A New Paradigm in Earth Environmental Monitoring with the CYGNSS Small Satellite Constellation

    by Christopher S. Ruf, Clara Chew, Timothy Lang, Mary G. Morris, Kyle Nave, Aaron Ridley, Rajeswari Balasubramaniam

    A constellation of small, low-cost satellites is able to make scientifically valuable measurements of the Earth which can be used for weather forecasting, disaster monitoring, and climate studies. Eight CYGNSS satellites were launched into low Earth orbit on December 15, 2016. Each satellite carries a science radar receiver which measures GPS signals reflected from the Earth surface. The signals contain information about the surface, including wind speed over ocean, and soil moisture and flooding over land. The satellites are distributed around their orbit plane so that measurements can be made more often to capture extreme weather events. Innovative engineering approaches are used to reduce per satellite cost, increase the number in the constellation, and improve temporal sampling. These include the use of differential drag rather than propulsion to adjust the spacing between satellites and the use of existing GPS signals as the science radars’ transmitter. Initial on-orbit results demonstrate the scientific utility of the CYGNSS observations, and suggest that a new paradigm in spaceborne Earth environmental monitoring is possible.