Zhenghong Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhenghong Guo has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
Zhengping Fang
Institute of Fire Safety Materials, School of Materials Science and Engineering NingboTech University Ningbo China
14 shared publicationsJuan Li
Institute of Fire Safety Materials, School of Materials Science and Engineering NingboTech University Ningbo China
13 shared publications- Zhengping Fang
Laboratory of Polymer Materials and Engineering Ningbo Institute of Technology, Zhejiang University Ningbo 315100 China
12 shared publications Bingtao Wang
Institute of Fire Safety Materials, School of Materials Science and Engineering NingboTech University Ningbo China
11 shared publicationsTing Sai
Institute of Fire Safety Materials, School of Materials Science and Engineering NingboTech University Ningbo China
8 shared publications- Shiya Ran
Zhejiang University
7 shared publications
Latest Publications
- Open Access
- 23 March 2026
- Published by Wiley in Safety Science and Technology
- Vol. 1 (1)
Recent Advances and Perspectives in UL‐94 V‐0 Rated Flame‐Retardant Polycarbonate: Addressing Challenges Under Per‐ and Polyfluoroalkyl Substances Bans
This review focuses on the recent advancements in the development of UL‐94 V‐0 rated fire‐retardant polycarbonate (PC) composites in response to global restrictions on per‐ and polyfluoroalkyl substances (PFAS). It systematically evaluates the current state of research, highlighting key strategies to enhance flame retardancy without compromising other critical properties, including mechanical strength, transparency, and environmental compatibility. By analyzing recent literatures, this review identifies emerging trends in material formulation, processing techniques, and performance evaluations. Particular attention is given to flame retardancy efficiency, smoke and heat release behaviors, thermal decomposition characteristics, optical clarity, and mechanical properties, including ductility, impact toughness, and mechanical strength. Finally, innovative insights are provided for the molecular design and functional integration of PFAS‐free flame‐retardant systems for high‐performance PCs.
- 23 March 2026
- Published by Wiley in Safety Science and Technology
- Vol. 1 (1)
Open AccessRecent Advances and Perspectives in UL‐94 V‐0 Rated Flame‐Retardant Polycarbonate: Addressing Challenges Under Per‐ and Polyfluoroalkyl Substances Bans
This review focuses on the recent advancements in the development of UL‐94 V‐0 rated fire‐retardant polycarbonate (PC) composites in response to global restrictions on per‐ and polyfluoroalkyl substances (PFAS). It systematically evaluates the current state of research, highlighting key strategies to enhance flame retardancy without compromising other critical properties, including mechanical strength, transparency, and environmental compatibility. By analyzing recent literatures, this review identifies emerging trends in material formulation, processing techniques, and performance evaluations. Particular attention is given to flame retardancy efficiency, smoke and heat release behaviors, thermal decomposition characteristics, optical clarity, and mechanical properties, including ductility, impact toughness, and mechanical strength. Finally, innovative insights are provided for the molecular design and functional integration of PFAS‐free flame‐retardant systems for high‐performance PCs.
- 13 February 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (17)
Rigid Polyurethane Foam Flame‐Retardanted by Environmentally Friendly Polyether Polyol Based on Dialdehyde Starch
Polyurethane foam (PUF) is widely recognized for its excellent mechanical properties, yet its inherent flammability and potential toxicity of certain additives limit its compliance with green and safe production principles. In this study, a novel melamine‐based polyether polyol (MFPPG) was synthesized using dialdehyde starch as the key bio‐based feedstock. Compared with previously reported melamine‐based polyether polyols, MFPPG has lower viscosity and toxicity, and better flame‐retardant performance in PUFs. Under the optimal molar ratio of raw materials, MFPPG showed favorable hydroxyl value and viscosity. When replacing 3% of commercial polyether polyol PPG4110, the modified polyurethane foams (MPUFs) exhibited significantly improved flame retardancy, thermal insulation, and mechanical performance; further increasing MFPPG loading led to poor compressive strength. Specifically, the compressive strength of MPUF was greatly enhanced, and the 3% MFPPG‐loaded MPUF also showed obviously improved thermal insulation performance compared with commercial foam.
- 13 February 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (17)
Rigid Polyurethane Foam Flame‐Retardanted by Environmentally Friendly Polyether Polyol Based on Dialdehyde Starch
Polyurethane foam (PUF) is widely recognized for its excellent mechanical properties, yet its inherent flammability and potential toxicity of certain additives limit its compliance with green and safe production principles. In this study, a novel melamine‐based polyether polyol (MFPPG) was synthesized using dialdehyde starch as the key bio‐based feedstock. Compared with previously reported melamine‐based polyether polyols, MFPPG has lower viscosity and toxicity, and better flame‐retardant performance in PUFs. Under the optimal molar ratio of raw materials, MFPPG showed favorable hydroxyl value and viscosity. When replacing 3% of commercial polyether polyol PPG4110, the modified polyurethane foams (MPUFs) exhibited significantly improved flame retardancy, thermal insulation, and mechanical performance; further increasing MFPPG loading led to poor compressive strength. Specifically, the compressive strength of MPUF was greatly enhanced, and the 3% MFPPG‐loaded MPUF also showed obviously improved thermal insulation performance compared with commercial foam.
- 6 February 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (2) , 56
Construction of fullerene grafted magnolol-based phosphonate and its regulation for the combustion behavior of intumescent flame-retardant polypropylene
- 6 February 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (2) , 56
Construction of fullerene grafted magnolol-based phosphonate and its regulation for the combustion behavior of intumescent flame-retardant polypropylene
- 16 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (13)
Synergistic Enhancement of Flame Retardancy Performance in Glass Fiber‐Reinforced Polyamide 6 Through the Incorporation of Aluminum Diethylphosphinate and Hexa (4‐aldehyde phenoxy) Cyclotriphosphazene
To improve the flame retardancy of glass fiber (GF)‐reinforced polyamide 6 (PA6/GF) composites and alleviate the “candlewick effect” caused by GF, this work synthesized hexa (4‐aldehyde phenoxy) cyclotriphosphazene (HAPCP) via the reaction of hexachlorocyclotriphosphazene (HCCP) and p ‐hydroxybenzaldehyde (PHB). Subsequently, HAPCP was combined with aluminum diethylphosphinate (ADP) to fabricate glass fiber‐reinforced polyamide 6 (PA6/GF) composites. The structural characterization of HAPCP was conducted, and the thermal stability, flame retardancy, and mechanical properties of PA6/GF composites were systematically investigated. The results indicated that compared with neat PA6/GF, the limiting oxygen index (LOI) of PA/1H/9ADP (adding 1 wt% HAPCP and 9 wt% ADP in PA6/GF) increased from 21.7% to 34.4%, and the UL‐94 rating achieved V‐0, with no melt droplets during combustion. The peak heat release (PHRR) and the total heat release (THR) respectively decreased by 51.2% and 29.4%, and the fire performance index (FPI) increased by 107.4%, demonstrating significantly enhanced flame retardancy. HAPCP existed a strong synergistic effect with ADP, promoting the formation of a continuous and compact protective layer during combustion, and generating non‐combustible gases that reduce the concentration of flammable species. This effectively mitigated the “candlewick effect” and improved the overall flame retardant performance of PA6/GF composites.
- 16 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (13)
Synergistic Enhancement of Flame Retardancy Performance in Glass Fiber‐Reinforced Polyamide 6 Through the Incorporation of Aluminum Diethylphosphinate and Hexa (4‐aldehyde phenoxy) Cyclotriphosphazene
To improve the flame retardancy of glass fiber (GF)‐reinforced polyamide 6 (PA6/GF) composites and alleviate the “candlewick effect” caused by GF, this work synthesized hexa (4‐aldehyde phenoxy) cyclotriphosphazene (HAPCP) via the reaction of hexachlorocyclotriphosphazene (HCCP) and p ‐hydroxybenzaldehyde (PHB). Subsequently, HAPCP was combined with aluminum diethylphosphinate (ADP) to fabricate glass fiber‐reinforced polyamide 6 (PA6/GF) composites. The structural characterization of HAPCP was conducted, and the thermal stability, flame retardancy, and mechanical properties of PA6/GF composites were systematically investigated. The results indicated that compared with neat PA6/GF, the limiting oxygen index (LOI) of PA/1H/9ADP (adding 1 wt% HAPCP and 9 wt% ADP in PA6/GF) increased from 21.7% to 34.4%, and the UL‐94 rating achieved V‐0, with no melt droplets during combustion. The peak heat release (PHRR) and the total heat release (THR) respectively decreased by 51.2% and 29.4%, and the fire performance index (FPI) increased by 107.4%, demonstrating significantly enhanced flame retardancy. HAPCP existed a strong synergistic effect with ADP, promoting the formation of a continuous and compact protective layer during combustion, and generating non‐combustible gases that reduce the concentration of flammable species. This effectively mitigated the “candlewick effect” and improved the overall flame retardant performance of PA6/GF composites.
- 20 December 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (10)
Cerium–Phosphate Complexes for Intumescent Flame‐Retardant Synergists: Enhancing Fire Safety and Thermostability of ABS Resin With Minimal Mechanical Sacrifice
Acrylonitrile‐butadiene‐styrene (ABS) resin faces significant fire hazards due to inherent flammability, necessitating halogen‐free flame retardants with minimal mechanical compromise. Herein, novel cerium diethylenetriamine penta(methylene phosphonate) (CeDETPMP) complexes were molecularly engineered via hydrothermal synthesis, systematically tuning Ce 3+ ‐to‐ligand ratios (from 1:3 to 3:1) to optimize coordination geometry. At 1 wt% loading, CeDETPMP synergized with an intumescent flame retardant (IFR, 19 wt% ADP/PAPP) to enable ABS composites to achieve UL‐94 V‐0 rating and a limiting oxygen index (LOI) of 24.8%, while reducing peak heat release rate (PHRR) by 73.8% and total smoke release (TSR) by 35.4% in cone calorimetry. Crucially, Ce 3+ /Ce 4+ redox cycling catalyzed graphitized char formation, suppressing crack propagation and enhancing barrier integrity. The optimal CeDETPMP (1:3) and CeDETPMP (3:1) ratios minimized mechanical sacrifice compared to ABS/IFR systems, retaining tensile strength within 26 MPa and 11 kJ/m 2 . This work establishes a structure–property paradigm for rare‐earth synergists in high‐safety polymer engineering.
- 20 December 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (10)
Cerium–Phosphate Complexes for Intumescent Flame‐Retardant Synergists: Enhancing Fire Safety and Thermostability of ABS Resin With Minimal Mechanical Sacrifice
Acrylonitrile‐butadiene‐styrene (ABS) resin faces significant fire hazards due to inherent flammability, necessitating halogen‐free flame retardants with minimal mechanical compromise. Herein, novel cerium diethylenetriamine penta(methylene phosphonate) (CeDETPMP) complexes were molecularly engineered via hydrothermal synthesis, systematically tuning Ce 3+ ‐to‐ligand ratios (from 1:3 to 3:1) to optimize coordination geometry. At 1 wt% loading, CeDETPMP synergized with an intumescent flame retardant (IFR, 19 wt% ADP/PAPP) to enable ABS composites to achieve UL‐94 V‐0 rating and a limiting oxygen index (LOI) of 24.8%, while reducing peak heat release rate (PHRR) by 73.8% and total smoke release (TSR) by 35.4% in cone calorimetry. Crucially, Ce 3+ /Ce 4+ redox cycling catalyzed graphitized char formation, suppressing crack propagation and enhancing barrier integrity. The optimal CeDETPMP (1:3) and CeDETPMP (3:1) ratios minimized mechanical sacrifice compared to ABS/IFR systems, retaining tensile strength within 26 MPa and 11 kJ/m 2 . This work establishes a structure–property paradigm for rare‐earth synergists in high‐safety polymer engineering.
- 19 September 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (2)
Biphasic Free‐Radical Synergistic Strategy Induced by Combining Fullerene and Hindered Amine for Intumescent Flame‐Retardant Polypropylene
Free‐radical scavengers (FRSs) can influence the combustion behavior and flame retardancy of polymers by quenching free radicals. To explore the influences of FRSs on the combustion behavior and flame‐retardant performance of polymers, in this paper, fullerene (C 60 ) was selected as the condensed‐phase FRS and hindered amines (NOR) as the gaseous‐phase FRS, and they were applied in flame‐retardant polypropylene (PP). Thermogravimetric analysis (TGA), vertical burning, limiting oxygen index (LOI), and cone calorimetry tests were used to characterize the thermal stability and flame‐retardant performance. The combination of C 60 and NOR increased the LOI of flame‐retardant PP to 30.5%, the vertical combustion test reached the V‐1 rating, and the peak heat release rate (PHRR), total heat release (THR), and total smoke production (TSP) all decreased. Morphology, composition, and structure of the carbon layer were characterized by scanning electron microscope (SEM) and x‐ray photoelectron spectroscopy (XPS). Thermogravimetric infrared spectroscopy coupling analysis (TG‐FTIR) and pyrolysis gas chromatography–mass spectrometry (Py‐GC/MS) were used to monitor the gas‐phase products. It was found that the biphasic free‐radical synergistic effect of C 60 and NOR promoted the formation of a high‐quality carbon layer, thereby enabling flame‐retardant PP to exhibit the optimal fire safety performance, which not only reduced the possibility of comprehensive combustion of flame‐retardant PP but also minimized the risk of fire spread.
- 19 September 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (2)
Biphasic Free‐Radical Synergistic Strategy Induced by Combining Fullerene and Hindered Amine for Intumescent Flame‐Retardant Polypropylene
Free‐radical scavengers (FRSs) can influence the combustion behavior and flame retardancy of polymers by quenching free radicals. To explore the influences of FRSs on the combustion behavior and flame‐retardant performance of polymers, in this paper, fullerene (C 60 ) was selected as the condensed‐phase FRS and hindered amines (NOR) as the gaseous‐phase FRS, and they were applied in flame‐retardant polypropylene (PP). Thermogravimetric analysis (TGA), vertical burning, limiting oxygen index (LOI), and cone calorimetry tests were used to characterize the thermal stability and flame‐retardant performance. The combination of C 60 and NOR increased the LOI of flame‐retardant PP to 30.5%, the vertical combustion test reached the V‐1 rating, and the peak heat release rate (PHRR), total heat release (THR), and total smoke production (TSP) all decreased. Morphology, composition, and structure of the carbon layer were characterized by scanning electron microscope (SEM) and x‐ray photoelectron spectroscopy (XPS). Thermogravimetric infrared spectroscopy coupling analysis (TG‐FTIR) and pyrolysis gas chromatography–mass spectrometry (Py‐GC/MS) were used to monitor the gas‐phase products. It was found that the biphasic free‐radical synergistic effect of C 60 and NOR promoted the formation of a high‐quality carbon layer, thereby enabling flame‐retardant PP to exhibit the optimal fire safety performance, which not only reduced the possibility of comprehensive combustion of flame‐retardant PP but also minimized the risk of fire spread.
- 23 March 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (23)
Toughening and Chain‐Extending Effect of Tris(4‐Hydroxyphenyl)methane Triglycidyl Ether for Waste Acrylonitrile‐Butadiene‐Styrene
Adding a chain extender is one of the effective means to achieve high‐value recycling of waste acrylonitrile‐butadiene‐styrene (wABS). In this study, tris(4‐hydroxyphenyl)methane triglycidyl ether (TTE), with the small molecular structure and multiple epoxy groups, was used as a chain extender in wABS. The effects of TTE on the mechanical properties, molar mass, rheological behaviors, thermal stability, and fracture morphology were studied. The results showed that TTE extended the broken wABS chains, increased the molar mass, and improved the morphology of wABS/TTE, resulting in better performance in impact strength, tensile strength, storage modulus, loss modulus, complex viscosity, and thermal stability. When the content of TTE is 2.0 wt.%, the impact strength of the wABS/TTE blend increased to 28.5 kJ/m2, which was a 20.8% increase compared with wABS, and both T 5% and T max2 in air had been improved, with each showing an increase of 5°C and 9°C, respectively, compared to wABS. The incorporation of TTE significantly enhanced wABS, improving interfacial bonding and providing better performance for wABS.
- 23 March 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (23)
Toughening and Chain‐Extending Effect of Tris(4‐Hydroxyphenyl)methane Triglycidyl Ether for Waste Acrylonitrile‐Butadiene‐Styrene
Adding a chain extender is one of the effective means to achieve high‐value recycling of waste acrylonitrile‐butadiene‐styrene (wABS). In this study, tris(4‐hydroxyphenyl)methane triglycidyl ether (TTE), with the small molecular structure and multiple epoxy groups, was used as a chain extender in wABS. The effects of TTE on the mechanical properties, molar mass, rheological behaviors, thermal stability, and fracture morphology were studied. The results showed that TTE extended the broken wABS chains, increased the molar mass, and improved the morphology of wABS/TTE, resulting in better performance in impact strength, tensile strength, storage modulus, loss modulus, complex viscosity, and thermal stability. When the content of TTE is 2.0 wt.%, the impact strength of the wABS/TTE blend increased to 28.5 kJ/m2, which was a 20.8% increase compared with wABS, and both T 5% and T max2 in air had been improved, with each showing an increase of 5°C and 9°C, respectively, compared to wABS. The incorporation of TTE significantly enhanced wABS, improving interfacial bonding and providing better performance for wABS.
- 24 September 2024
- Published by Elsevier in Thermochimica Acta
- Vol. 742
Kinetics and mechanism of thermal and thermo-oxidative degradation for high-density polyethylene modified by fullerene and its derivative
- 24 September 2024
- Published by Elsevier in Thermochimica Acta
- Vol. 742
Kinetics and mechanism of thermal and thermo-oxidative degradation for high-density polyethylene modified by fullerene and its derivative
- 21 June 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (36)
A Cu‐MOF‐decorated ammonium polyphosphate for epoxy resins with reduced smoke release and enhanced char layer
Inspired by the significant catalytic charring effect of metal–organic frameworks (MOFs), Cu‐MOF decorated ammonium polyphosphate (APP@Cu‐MOF) was prepared by coupling agents to improve the fire safety of epoxy resin (EP). After adding 9 wt% APP@Cu‐MOF, the fire performance of EP is significantly improved with limiting oxide index (LOI) value of 29.4 and UL‐94 V‐0 rating. The peak heat release rate (PHRR), total smoke production (TSP), CO production, and CO2 production of EP composite samples decreased by 34.6%, 54.7%, 24.6% and 30.0%, respectively. It is proposed that the synergistic effect among Cu‐MOF and APP promoted the char formation of EP. The dense carbon layers formed a barrier that prevented the transfer of heat and inhibited the release of toxic gases, thus acting as a flame retardant. This work provides a new strategy to develop a high‐efficient MOF‐decorated flame retardant with smoke inhibition, toxicity reduction, and catalytic carbonization effect.
- 21 June 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (36)
A Cu‐MOF‐decorated ammonium polyphosphate for epoxy resins with reduced smoke release and enhanced char layer
Inspired by the significant catalytic charring effect of metal–organic frameworks (MOFs), Cu‐MOF decorated ammonium polyphosphate (APP@Cu‐MOF) was prepared by coupling agents to improve the fire safety of epoxy resin (EP). After adding 9 wt% APP@Cu‐MOF, the fire performance of EP is significantly improved with limiting oxide index (LOI) value of 29.4 and UL‐94 V‐0 rating. The peak heat release rate (PHRR), total smoke production (TSP), CO production, and CO2 production of EP composite samples decreased by 34.6%, 54.7%, 24.6% and 30.0%, respectively. It is proposed that the synergistic effect among Cu‐MOF and APP promoted the char formation of EP. The dense carbon layers formed a barrier that prevented the transfer of heat and inhibited the release of toxic gases, thus acting as a flame retardant. This work provides a new strategy to develop a high‐efficient MOF‐decorated flame retardant with smoke inhibition, toxicity reduction, and catalytic carbonization effect.