Alexis Duque
Alexis Duque has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Adrien Desportes
4 shared publications- Herve Rivano
Inria, INSA Lyon, CITI, UR3720, Villeurbanne, France
4 shared publications Razvan Stanica
3 shared publications- Alec F. Diallo
The University of Edinburgh, Edinburgh, United Kingdom
2 shared publications - Ana Martínez-González
Net AI Tech Ltd, Edinburgh, Scotland, United Kingdom
2 shared publications - Marco Fiore
IMDEA Networks Institute, Madrid, Spain
2 shared publications
Latest Publications
- Open Access
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 26-27
Demo: A Policy-Reactive Digital Twin for RAN Carrier Switch-Off
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 26-27
Open AccessDemo: A Policy-Reactive Digital Twin for RAN Carrier Switch-Off
- Open Access
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 17-23
Test Before You Sleep: A Policy-Reactive Digital Twin for RAN Carrier Switch-Off
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 17-23
Open AccessTest Before You Sleep: A Policy-Reactive Digital Twin for RAN Carrier Switch-Off
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Bidirectional visible light communications for the internet of things
Communications bidirectionnelles par lumière visible entre un objet connecté et un smartphone non modifié: Dans cette thèse, nous concevons et étudions un système de communication bidirectionnel par lumière visible (VLC) entre une diode électroluminescente (DEL) de couleur, intégrée à un objet connecté, et un smartphone. Le dispositif est ainsi capable d'envoyer et de recevoir des informations à travers sa DEL, tandis que le smartphone utilise sa caméra pour recevoir des données et son flash pour envoyer des informations. Nous mettons en œuvre et évaluons expérimentalement ce système VLC DEL-à-camera conçu spécifiquement pour les DELs de couleur à faible puissance. En nous appuyant sur les résultats d'une vaste étude expérimentale, nous modélisons, pour la première fois dans la littérature, le canal de communication DEL-à-caméra. Nous proposons alors un modèle de processus de Bernoulli modulé par une chaîne de Markov, qui nous permet d'étudier facilement l'efficacité de différentes stratégies de retransmission des messages. Nous exploitons ce modèle afin de concevoir un simulateur pour l'évaluation des performances des communications DEL-à-caméra. Afin d'obtenir un système de communication bidirectionnel, nous étudions ensuite les communications de type flash-vers-DEL entre un smartphone non-modifié et une petite DEL de couleur. Les performances, bien que limitées, sont suffisantes pour établir une voie retour qui permet de mettre en œuvre des mécanismes de fiabilisation. Nous proposons alors un mécanisme de codage linéaire pseudo-aléatoire, spécialement adapté aux conditions et contraintes du système DEL-à-caméra en ligne de visée directe. Notre évaluation expérimentale souligne que ce type d'approche augmente le rendement jusqu'à deux fois par rapport aux stratégies de retransmission classiques. Enfin, la plupart des objets que nous adressons ont des contraintes énergétiques importantes. Par conséquent, nous comparons la consommation d'énergie de notre système avec celle d'un module Bluetooth Low Energy avec une activité similaire. Nos résultats montrent que notre système réduit la consommation d'énergie dans le cadre d'un profil d'utilisation classique.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Bidirectional visible light communications for the internet of things
Communications bidirectionnelles par lumière visible entre un objet connecté et un smartphone non modifié: Dans cette thèse, nous concevons et étudions un système de communication bidirectionnel par lumière visible (VLC) entre une diode électroluminescente (DEL) de couleur, intégrée à un objet connecté, et un smartphone. Le dispositif est ainsi capable d'envoyer et de recevoir des informations à travers sa DEL, tandis que le smartphone utilise sa caméra pour recevoir des données et son flash pour envoyer des informations. Nous mettons en œuvre et évaluons expérimentalement ce système VLC DEL-à-camera conçu spécifiquement pour les DELs de couleur à faible puissance. En nous appuyant sur les résultats d'une vaste étude expérimentale, nous modélisons, pour la première fois dans la littérature, le canal de communication DEL-à-caméra. Nous proposons alors un modèle de processus de Bernoulli modulé par une chaîne de Markov, qui nous permet d'étudier facilement l'efficacité de différentes stratégies de retransmission des messages. Nous exploitons ce modèle afin de concevoir un simulateur pour l'évaluation des performances des communications DEL-à-caméra. Afin d'obtenir un système de communication bidirectionnel, nous étudions ensuite les communications de type flash-vers-DEL entre un smartphone non-modifié et une petite DEL de couleur. Les performances, bien que limitées, sont suffisantes pour établir une voie retour qui permet de mettre en œuvre des mécanismes de fiabilisation. Nous proposons alors un mécanisme de codage linéaire pseudo-aléatoire, spécialement adapté aux conditions et contraintes du système DEL-à-caméra en ligne de visée directe. Notre évaluation expérimentale souligne que ce type d'approche augmente le rendement jusqu'à deux fois par rapport aux stratégies de retransmission classiques. Enfin, la plupart des objets que nous adressons ont des contraintes énergétiques importantes. Par conséquent, nous comparons la consommation d'énergie de notre système avec celle d'un module Bluetooth Low Energy avec une activité similaire. Nos résultats montrent que notre système réduit la consommation d'énergie dans le cadre d'un profil d'utilisation classique.
- 23 June 2025
- Published by Springer Nature
- p. 57-72
Architectural Aspects of Unified Terrestrial and Non-terrestrial Mobile Networks
- 23 June 2025
- Published by Springer Nature
- p. 57-72
Architectural Aspects of Unified Terrestrial and Non-terrestrial Mobile Networks
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Decoding methods in LED-to-smartphone bidirectional communication for the IoT
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Decoding methods in LED-to-smartphone bidirectional communication for the IoT
- Open Access
- 16 October 2017
- Published by Association for Computing Machinery (ACM)
- p. 15-20
SeedLight
International audienceWith the increasing consumer demand for smart objects, LED-to-Camera communication appears as a low-cost alternative to radio to make any conventional device smart. Since LEDs are already on most electronics devices, that is achieved at the cost of negligible hardware modifications. However, as these LEDs are very different from the widely studied ceiling ones, several challenges need to be addressed to make this happen. Among these issues, we note the constrained physical layer data unit (PHY-SDU) length that complicates the use of coding strategies to cope with bits or packets erasure.To break this limitation, this paper presents SeedLight, a coding scheme designed to face the inherent packet losses and enhance line-of-sight LED-to-Camera communication goodput. SeedLight leverages random linear coding to provide an efficient redundancy mechanism that works even on PHY-SDU of tens of bits. The key idea of SeedLight is to reduce the code overhead by replacing the usual coding coefficients by a seed. Since this work addresses IoT devices with low computational resources, SeedLight encoding algorithm complexity remains low.We develop an implementation of SeedLight on a low-cost MCU and a smartphone to evaluate both the communication and algorithmic performances. Experimental results show that SeedLight introduces a negligible overhead and can be implemented even on the cheapest MCU, such as the ones used in many IoT devices. The achievable goodput can be up to 2.5kbps, while the gain compared to a trivial retransmissions scheme is up to 100%
- 16 October 2017
- Published by Association for Computing Machinery (ACM)
- p. 15-20
Open AccessSeedLight
International audienceWith the increasing consumer demand for smart objects, LED-to-Camera communication appears as a low-cost alternative to radio to make any conventional device smart. Since LEDs are already on most electronics devices, that is achieved at the cost of negligible hardware modifications. However, as these LEDs are very different from the widely studied ceiling ones, several challenges need to be addressed to make this happen. Among these issues, we note the constrained physical layer data unit (PHY-SDU) length that complicates the use of coding strategies to cope with bits or packets erasure.To break this limitation, this paper presents SeedLight, a coding scheme designed to face the inherent packet losses and enhance line-of-sight LED-to-Camera communication goodput. SeedLight leverages random linear coding to provide an efficient redundancy mechanism that works even on PHY-SDU of tens of bits. The key idea of SeedLight is to reduce the code overhead by replacing the usual coding coefficients by a seed. Since this work addresses IoT devices with low computational resources, SeedLight encoding algorithm complexity remains low.We develop an implementation of SeedLight on a low-cost MCU and a smartphone to evaluate both the communication and algorithmic performances. Experimental results show that SeedLight introduces a negligible overhead and can be implemented even on the cheapest MCU, such as the ones used in many IoT devices. The achievable goodput can be up to 2.5kbps, while the gain compared to a trivial retransmissions scheme is up to 100%
- Open Access
- 3 October 2016
- Published by Association for Computing Machinery (ACM)
- p. 55-60
Unleashing the power of LED-to-camera communications for IoT devices
International audienceIn this paper, we propose a line of sight LED-to-camera communication system based on a small color LED and a smartphone. We design a cheap prototype as proof of concept of a near communication framework for the Internet of Things. We evaluate the system performance, its reliability and the environment influence on the LED-to-camera communication, highlighting that a throughput of a few kilobits per second is reachable. Finally, we design a real time, efficient LED detection and image processing algorithm to leverage the specific issues encountered in the system
- 3 October 2016
- Published by Association for Computing Machinery (ACM)
- p. 55-60
Open AccessUnleashing the power of LED-to-camera communications for IoT devices
International audienceIn this paper, we propose a line of sight LED-to-camera communication system based on a small color LED and a smartphone. We design a cheap prototype as proof of concept of a near communication framework for the Internet of Things. We evaluate the system performance, its reliability and the environment influence on the LED-to-camera communication, highlighting that a throughput of a few kilobits per second is reachable. Finally, we design a real time, efficient LED detection and image processing algorithm to leverage the specific issues encountered in the system
- Open Access
- 3 October 2016
- Published by Association for Computing Machinery (ACM)
- p. 4-60
Unleashing the power of LED-to-camera communications for IoT devices
In this paper, we propose a line of sight LED-to-camera communication system based on a small color LED and a smartphone. We design a cheap prototype as proof of concept of a near communication framework for the Internet of Things. We evaluate the system performance, its reliability and the environment influence on the LED-to-camera communication, highlighting that a throughput of a few kilobits per second is reachable. Finally, we design a real time, efficient LED detection and image processing algorithm to leverage the specific issues encountered in the system.
- 3 October 2016
- Published by Association for Computing Machinery (ACM)
- p. 4-60
Open AccessUnleashing the power of LED-to-camera communications for IoT devices
In this paper, we propose a line of sight LED-to-camera communication system based on a small color LED and a smartphone. We design a cheap prototype as proof of concept of a near communication framework for the Internet of Things. We evaluate the system performance, its reliability and the environment influence on the LED-to-camera communication, highlighting that a throughput of a few kilobits per second is reachable. Finally, we design a real time, efficient LED detection and image processing algorithm to leverage the specific issues encountered in the system.