Xiangling Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiangling Gao has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Jie Li
College of Civil Engineering, Tongji University, Shanghai, China
3 shared publications Xiaodan Ren
3 shared publications- Xiaodan Ren
Tongji University
3 shared publications - Chao-Lie Ning
College of Civil Engineering, Tongji University, Shanghai, China
2 shared publications Dong Xiang
College of Civil Engineering, Tongji University Shanghai China
2 shared publicationsChuntai Su
1 shared publication
Latest Publications
- 22 April 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 107
Seismic fragility analysis method of building structures integrated with probabilistic seismic hazard analysis
- 22 April 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 107
Seismic fragility analysis method of building structures integrated with probabilistic seismic hazard analysis
- 6 June 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 93
Experimental analysis of RC and SPRC squat shear walls
- 6 June 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 93
Experimental analysis of RC and SPRC squat shear walls
- 11 April 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (4) , 2800-2818
A numerical critical shear crack model and its application to post‐peak behavior assessment of RC and SFRC beams
In this paper, a numerical critical shear crack model, in which the shear‐flexural coupling effect is considered and the full process of stress and strain is captured, is proposed to evaluate the post‐peak behavior of reinforced concrete (RC) and steel fiber reinforced concrete (SFRC) beams. The shape of critical shear crack is identified by combining the modified compression field theory considering the bridge effect of steel fibers and the section analysis method. Based on the shape of critical shear crack, the shear capacity of beam members is provided by the shear tension zone and the shear compression zone. The shear capacity of the shear tension zone is calculated by the modified compression field theory and that of the shear compression zone is determined by multiaxial strength criterion of concrete. The vertical displacements caused by the flexure deformation and shear deformation are deduced by the moment area method and integration of shear strain. To verify the proposed numerical approach, a test database of 486 RC beams and 313 SFRC beams was established to predict the shear strength, and the force‐displacement relationships of twelve beam members are used to validate the feasibility for full process analysis. The stochastic analysis of beams with different failure modes is conducted via GF‐discrepancy‐based point selection method and probability density evolution method. The limitation between different failure modes is defined according to the degradation percent of shear capacity and it is taken as threshold value of failure domain, and the failure probability analysis indicates that the designed flexure beam member suffered severe degradation of shear capacity, resulting in a significant decline in safety probability.
- 11 April 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (4) , 2800-2818
A numerical critical shear crack model and its application to post‐peak behavior assessment of RC and SFRC beams
In this paper, a numerical critical shear crack model, in which the shear‐flexural coupling effect is considered and the full process of stress and strain is captured, is proposed to evaluate the post‐peak behavior of reinforced concrete (RC) and steel fiber reinforced concrete (SFRC) beams. The shape of critical shear crack is identified by combining the modified compression field theory considering the bridge effect of steel fibers and the section analysis method. Based on the shape of critical shear crack, the shear capacity of beam members is provided by the shear tension zone and the shear compression zone. The shear capacity of the shear tension zone is calculated by the modified compression field theory and that of the shear compression zone is determined by multiaxial strength criterion of concrete. The vertical displacements caused by the flexure deformation and shear deformation are deduced by the moment area method and integration of shear strain. To verify the proposed numerical approach, a test database of 486 RC beams and 313 SFRC beams was established to predict the shear strength, and the force‐displacement relationships of twelve beam members are used to validate the feasibility for full process analysis. The stochastic analysis of beams with different failure modes is conducted via GF‐discrepancy‐based point selection method and probability density evolution method. The limitation between different failure modes is defined according to the degradation percent of shear capacity and it is taken as threshold value of failure domain, and the failure probability analysis indicates that the designed flexure beam member suffered severe degradation of shear capacity, resulting in a significant decline in safety probability.
- 25 January 2024
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 125 (8)
A convergence‐enhanced Timoshenko beam element for the stochastic nonlinear analysis of reinforced concrete components
An effective and precise physical model is generally required for the performance assessment of reinforced concrete (RC) components. In this study, a convergence‐enhanced Timoshenko beam element considering finite deformation is proposed for the stochastic nonlinear analysis of RC components. The unified framework of the rank 2 correction matrix is obtained by approximating the iterative matrix through the linearly independent basis vectors, and two types of Broyden–Fletcher–Goldfarb–Shanno (BFGS) operators are constructed. Then, a consistent solution scheme with superior numerical stability and efficiency is proposed based on the second kind of BFGS operator and improved quasi‐Newton method. Accurate discretization of the displacement fields and description of nonlinear sectional behavior are achieved by the high‐order Lagrangian interpolation functions, concrete damage‐plasticity model and J2 plasticity model. In an updated Lagrangian formulation, these shape functions and constitutive relationships are used to develop a complete secant stiffness with higher‐order terms in the strain tensor and residual force vector. To validate the proposed Timoshenko beam element, numerical applications involving material nonlinearity and geometrical nonlinearity are conducted. The numerical stability and efficiency of the solution scheme, the shear‐locking free technique, and the oscillation of axial force are thoroughly examined and discussed by solution of RC columns, cantilever beam and progressive collapse of planar RC frame. Finally, the parametric study considering the geometric and material randomness indicates that the RC column designed for flexural failure mode suffered considerable degradation of loading capacity and a larger scatter of residual load.
- 25 January 2024
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 125 (8)
A convergence‐enhanced Timoshenko beam element for the stochastic nonlinear analysis of reinforced concrete components
An effective and precise physical model is generally required for the performance assessment of reinforced concrete (RC) components. In this study, a convergence‐enhanced Timoshenko beam element considering finite deformation is proposed for the stochastic nonlinear analysis of RC components. The unified framework of the rank 2 correction matrix is obtained by approximating the iterative matrix through the linearly independent basis vectors, and two types of Broyden–Fletcher–Goldfarb–Shanno (BFGS) operators are constructed. Then, a consistent solution scheme with superior numerical stability and efficiency is proposed based on the second kind of BFGS operator and improved quasi‐Newton method. Accurate discretization of the displacement fields and description of nonlinear sectional behavior are achieved by the high‐order Lagrangian interpolation functions, concrete damage‐plasticity model and J2 plasticity model. In an updated Lagrangian formulation, these shape functions and constitutive relationships are used to develop a complete secant stiffness with higher‐order terms in the strain tensor and residual force vector. To validate the proposed Timoshenko beam element, numerical applications involving material nonlinearity and geometrical nonlinearity are conducted. The numerical stability and efficiency of the solution scheme, the shear‐locking free technique, and the oscillation of axial force are thoroughly examined and discussed by solution of RC columns, cantilever beam and progressive collapse of planar RC frame. Finally, the parametric study considering the geometric and material randomness indicates that the RC column designed for flexural failure mode suffered considerable degradation of loading capacity and a larger scatter of residual load.
- 1 November 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Pipeline Systems Engineering and Practice
- Vol. 14 (4)
Probability Prediction Model of the Maximum Corrosion Depth of Concrete Sewage Pipes
- 1 November 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Pipeline Systems Engineering and Practice
- Vol. 14 (4)
Probability Prediction Model of the Maximum Corrosion Depth of Concrete Sewage Pipes
- 23 August 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 402
Cohesive model of complex friction behaviors in reinforcement-concrete interfaces
- 23 August 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 402
Cohesive model of complex friction behaviors in reinforcement-concrete interfaces
- Open Access
- 1 June 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 787 (1) , 012019
Analysis of the influencing parameters of double steel-plate composite shear wall
The double steel plate concrete composite shear walls are widely used in nuclear power structures due to good bearing capacity, deformation capacity and radiation resistance. The shear walls of nuclear power structures are totally different with that in the civil buildings, which have the characteristics of small shear span to depth ratio and large thickness. On the basis of summarizing and analysing the test results of double steel plate composite shear wall, finite element models were established to verify the validity of the simulated results. Moreover, the influence of steel ratio, axial compression ratio and shear span to depth ratio on the bearing capacity of composite shear wall was studied. The results showed that the composite shear wall has good mechanical performance. Steel ratio and shear span to depth ratio had remarkable influence on the bearing capacity of the composite shear walls.
- 1 June 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 787 (1) , 012019
Open AccessAnalysis of the influencing parameters of double steel-plate composite shear wall
The double steel plate concrete composite shear walls are widely used in nuclear power structures due to good bearing capacity, deformation capacity and radiation resistance. The shear walls of nuclear power structures are totally different with that in the civil buildings, which have the characteristics of small shear span to depth ratio and large thickness. On the basis of summarizing and analysing the test results of double steel plate composite shear wall, finite element models were established to verify the validity of the simulated results. Moreover, the influence of steel ratio, axial compression ratio and shear span to depth ratio on the bearing capacity of composite shear wall was studied. The results showed that the composite shear wall has good mechanical performance. Steel ratio and shear span to depth ratio had remarkable influence on the bearing capacity of the composite shear walls.
- 13 August 2020
- Published by Wiley in Structural Concrete
- Vol. 22 (S1)
Rate effect on the stress–strain behavior of concrete under uniaxial tensile stress
Concrete is a typical rate‐dependent material, and a direct tensile test is the most effective method by which to investigate its tensile performance. In this study, an additional loading device for direct uniaxial tensile tests was designed and fabricated to achieve central loading and determine the descending stage during direct tensile tests. Experimental results prove that the device is reliable and convenient for reuse; it is characterized by its ability to obtain complete stress–strain curves and to be used for many repetitive tests. Initially, 27 prismatic specimens were used to test the compressive strengths and elastic moduli of concrete specimens with designed compressive strengths of 25, 30, and 50 MPa. Next, a total of 256 uniaxial direct tensile tests were carried out, including 101 static tests at a loading strain rate of 10−5 s−1 and 155 dynamic tests at loading strain rates of 10−4 s−1 and 10−2 s−1. A total of 121 complete stress–strain curves were acquired for the 256 direct tensile tests. According to the test results, the SDs of the entire curves of the tensile stress of concrete are presented, and the energy absorption capacities of the specimens were also determined. The effects of the loading rate on the mean and variability of the peak stress, peak secant modulus, elastic modulus, and peak strain were analyzed. With the increase of the strain rate, the other indexes, excluding the peak strain, were found to notably increase.
- 13 August 2020
- Published by Wiley in Structural Concrete
- Vol. 22 (S1)
Rate effect on the stress–strain behavior of concrete under uniaxial tensile stress
Concrete is a typical rate‐dependent material, and a direct tensile test is the most effective method by which to investigate its tensile performance. In this study, an additional loading device for direct uniaxial tensile tests was designed and fabricated to achieve central loading and determine the descending stage during direct tensile tests. Experimental results prove that the device is reliable and convenient for reuse; it is characterized by its ability to obtain complete stress–strain curves and to be used for many repetitive tests. Initially, 27 prismatic specimens were used to test the compressive strengths and elastic moduli of concrete specimens with designed compressive strengths of 25, 30, and 50 MPa. Next, a total of 256 uniaxial direct tensile tests were carried out, including 101 static tests at a loading strain rate of 10−5 s−1 and 155 dynamic tests at loading strain rates of 10−4 s−1 and 10−2 s−1. A total of 121 complete stress–strain curves were acquired for the 256 direct tensile tests. According to the test results, the SDs of the entire curves of the tensile stress of concrete are presented, and the energy absorption capacities of the specimens were also determined. The effects of the loading rate on the mean and variability of the peak stress, peak secant modulus, elastic modulus, and peak strain were analyzed. With the increase of the strain rate, the other indexes, excluding the peak strain, were found to notably increase.
- Open Access
- 1 January 2020
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 123 (3) , 1105-1129
Safety Performance of a Precast Concrete Barrier: Numerical Study
The numerical simulation for a new type of precast concrete barrier for viaducts is carried out systematically. To obtain an accurate representation of the damage state of the concrete barrier under the impact of a vehicle, a stochastic damage-plasticity model of the concrete is adopted in the finite element model. Meanwhile, a simplified mathematical model of the impact between vehicles and the concrete barrier was established and the input energy was converted to the impact load to facilitate the investigation of the safety performance of the concrete barriers. On this basis, a refined finite element (FE) model of a precast concrete barrier was developed. The impact locations, impact load, boundary constraints, and reinforcement types were used as variables and the dynamic response of the precast concrete barrier was systematically analyzed under 36 working conditions. The simulated results indicated that the damage state of the concrete barrier and the stress of the reinforcing bars were accurately and quantitatively reflected. According to the computed results, some suggestions were put forward for selecting the appropriate reinforcement type of the precast concrete barrier and the connection between the superstructure and foundation.
- 1 January 2020
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 123 (3) , 1105-1129
Open AccessSafety Performance of a Precast Concrete Barrier: Numerical Study
The numerical simulation for a new type of precast concrete barrier for viaducts is carried out systematically. To obtain an accurate representation of the damage state of the concrete barrier under the impact of a vehicle, a stochastic damage-plasticity model of the concrete is adopted in the finite element model. Meanwhile, a simplified mathematical model of the impact between vehicles and the concrete barrier was established and the input energy was converted to the impact load to facilitate the investigation of the safety performance of the concrete barriers. On this basis, a refined finite element (FE) model of a precast concrete barrier was developed. The impact locations, impact load, boundary constraints, and reinforcement types were used as variables and the dynamic response of the precast concrete barrier was systematically analyzed under 36 working conditions. The simulated results indicated that the damage state of the concrete barrier and the stress of the reinforcing bars were accurately and quantitatively reflected. According to the computed results, some suggestions were put forward for selecting the appropriate reinforcement type of the precast concrete barrier and the connection between the superstructure and foundation.