Daniel P. Grosvenor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Daniel P. Grosvenor has a total of 288 co-authors. Here are the top co-authors by number of shared publications:
- Kenneth S. Carslaw
Institute for Climate and Atmospheric Science, School of Earth and Environment, University of Leeds, Leeds LS2 9JT, UK
71 shared publications - Hamish Gordon
Department of Chemical Engineering and Center for Atmospheric Particle Studies, Carnegie Mellon University, Pittsburgh, Pennsylvania, USA
39 shared publications Paul R. Field
Institute for Climate and Atmospheric Science, School of Earth and Environment, University of Leeds, Leeds LS2 9JT, UK
31 shared publications- Philip Stier
Department of Physics, University of Oxford, Oxford, UK
21 shared publications - Masaru Yoshioka
School of Earth and Environment, University of Leeds, Leeds, UK
20 shared publications - Benjamin John Murray
Institute for Climate and Atmospheric Science, School of Earth and Environment, University of Leeds, Leeds LS2 9JT, UK
19 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (20) , 14577-14616
Interacting effects of droplet number and ice formation processes on mixed-phase cold-air outbreak clouds
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration ( N d ), ice-nucleating particle concentration ( N INP ), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, N d and N INP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying N d and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in N INP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- 15 October 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (20) , 14577-14616
Open AccessInteracting effects of droplet number and ice formation processes on mixed-phase cold-air outbreak clouds
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration ( N d ), ice-nucleating particle concentration ( N INP ), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, N d and N INP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying N d and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in N INP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- Open Access
- 11 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Comment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- 11 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Open AccessComment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- Open Access
- 11 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Comment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- 11 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Open AccessComment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- Open Access
- 27 March 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (6) , 4341-4358
Impacts of the Icelandic Holuhraun volcanic eruption on cloud properties using regional model cloud-aerosol simulations
Aerosol-cloud interactions remain a significant uncertainty in climate prediction, largely due to the complexity of measuring and modelling these processes. Volcanic eruptions, such as the Holuhraun event in 2014, offer valuable opportunities to study these interactions by introducing substantial aerosol perturbations. In this study, we investigate the impacts of the Icelandic Holuhraun volcanic eruption on cloud properties using the CASIM cloud microphysics model and the UKCA-GLOMAP aerosol microphysics model within the high-resolution regional model of the UK Met Office Unified Model. For a four-week simulation, our findings indicate a more than 80 % increase in droplet number concentration during the eruption with reductions in cloud droplet size, both of which are statistically significant at the 0.05 level in t-tests. In contrast, the effects of the volcanic eruption on liquid water path and cloud fraction are not generally significant. During the third week of September, neither satellite observations nor model simulations show significant impacts of the volcanic plume on cloud properties when comparing in-plume to out-of-plume properties. Our simulations suggest that the volcanic aerosol effect during this period was masked by factors affecting the out-of-plume atmospheric conditions, such as natural meteorological variability or non-volcanic aerosols possibly originating from Europe. When volcano on/off simulations are examined, the droplet number increase and the reduction in droplet size remain evident, indicating that these effects are still active. This highlights the crucial role of realistic models in revealing aerosol-cloud interactions that can be obscured in observations due to environmental and meteorological factors.
- 27 March 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (6) , 4341-4358
Open AccessImpacts of the Icelandic Holuhraun volcanic eruption on cloud properties using regional model cloud-aerosol simulations
Aerosol-cloud interactions remain a significant uncertainty in climate prediction, largely due to the complexity of measuring and modelling these processes. Volcanic eruptions, such as the Holuhraun event in 2014, offer valuable opportunities to study these interactions by introducing substantial aerosol perturbations. In this study, we investigate the impacts of the Icelandic Holuhraun volcanic eruption on cloud properties using the CASIM cloud microphysics model and the UKCA-GLOMAP aerosol microphysics model within the high-resolution regional model of the UK Met Office Unified Model. For a four-week simulation, our findings indicate a more than 80 % increase in droplet number concentration during the eruption with reductions in cloud droplet size, both of which are statistically significant at the 0.05 level in t-tests. In contrast, the effects of the volcanic eruption on liquid water path and cloud fraction are not generally significant. During the third week of September, neither satellite observations nor model simulations show significant impacts of the volcanic plume on cloud properties when comparing in-plume to out-of-plume properties. Our simulations suggest that the volcanic aerosol effect during this period was masked by factors affecting the out-of-plume atmospheric conditions, such as natural meteorological variability or non-volcanic aerosols possibly originating from Europe. When volcano on/off simulations are examined, the droplet number increase and the reduction in droplet size remain evident, indicating that these effects are still active. This highlights the crucial role of realistic models in revealing aerosol-cloud interactions that can be obscured in observations due to environmental and meteorological factors.
- Open Access
- 17 March 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (5) , 3805-3851
Evaluation of UKESM aerosol size and composition using ATom measurements indicates missing marine aerosol formation mechanisms
Atmospheric aerosols influence climate through their interactions with radiation and clouds, yet large uncertainties remain in their simulation by global models. This study evaluates the United Kingdom Earth System Model version 1.1 (UKESM1.1) using global-scale aircraft observations from the Atmospheric Tomography (ATom) mission, focusing on aerosol lifecycle processes in the remote marine atmosphere. We assess model performance in simulating aerosol precursor vapours, number size distributions, chemical composition, and environmental conditions. Several process improvements are tested, including sulfuric acid-ammonia nucleation, ammonium nitrate scheme, methanesulfonic acid condensation, and low-temperature isoprene-derived secondary organic aerosol formation. Model biases differ significantly between the upper troposphere (UT) and the marine boundary layer (MBL). In the UT, UKESM1.1 overestimates nucleation and Aitken mode particles while underestimating accumulation mode, indicating insufficient growth. In the MBL, the model overestimates primary aerosols (e.g. seasalt) and precursor gases but underestimates nucleation and Aitken mode particles, even after incorporating updated nucleation and ammonium nitrate scheme. The persistence of low aerosol number concentrations, despite overestimated precursors, suggests missing formation pathways likely involving other species such as iodine, amines, and organic vapours. These limitations result in an unbalanced cloud condensation nuclei budget that over-relies on primary emissions. Sensitivity tests reveal that model outputs are strongly influenced by dimethyl sulfide emissions and vapour condensation schemes. Our results highlight the need for future model development to prioritise mechanistic representation of currently missing aerosol sources, rather than relying on empirical tuning, to improve aerosol-climate interaction estimates.
- 17 March 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (5) , 3805-3851
Open AccessEvaluation of UKESM aerosol size and composition using ATom measurements indicates missing marine aerosol formation mechanisms
Atmospheric aerosols influence climate through their interactions with radiation and clouds, yet large uncertainties remain in their simulation by global models. This study evaluates the United Kingdom Earth System Model version 1.1 (UKESM1.1) using global-scale aircraft observations from the Atmospheric Tomography (ATom) mission, focusing on aerosol lifecycle processes in the remote marine atmosphere. We assess model performance in simulating aerosol precursor vapours, number size distributions, chemical composition, and environmental conditions. Several process improvements are tested, including sulfuric acid-ammonia nucleation, ammonium nitrate scheme, methanesulfonic acid condensation, and low-temperature isoprene-derived secondary organic aerosol formation. Model biases differ significantly between the upper troposphere (UT) and the marine boundary layer (MBL). In the UT, UKESM1.1 overestimates nucleation and Aitken mode particles while underestimating accumulation mode, indicating insufficient growth. In the MBL, the model overestimates primary aerosols (e.g. seasalt) and precursor gases but underestimates nucleation and Aitken mode particles, even after incorporating updated nucleation and ammonium nitrate scheme. The persistence of low aerosol number concentrations, despite overestimated precursors, suggests missing formation pathways likely involving other species such as iodine, amines, and organic vapours. These limitations result in an unbalanced cloud condensation nuclei budget that over-relies on primary emissions. Sensitivity tests reveal that model outputs are strongly influenced by dimethyl sulfide emissions and vapour condensation schemes. Our results highlight the need for future model development to prioritise mechanistic representation of currently missing aerosol sources, rather than relying on empirical tuning, to improve aerosol-climate interaction estimates.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Interacting effects of aerosols and ice formation processes on mixed-phase cold-air outbreak clouds
Mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories to study mixed-phase cloud processes which are important for our estimation of cloud-phase feedback. These CAO clouds have also been shown vital to the radiative bias over the Southern Ocean. Recent studies show that CAO clouds are sensitive to aerosols including cloud condensation nuclei (CCN) and ice-nucleating particles (INPs), as well as secondary ice production (SIP). Therefore, it is vital to understand how these processes affect the radiative properties of CAO clouds and their roles in the cloud-phase feedback mechanism. However, many modelling studies have investigated the effects of these processes by perturbing model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles (PPEs) of a high-resolution regional model. The selected CAO case was on 24 October 2022 over the Labrador Sea, which coincided with the M-Phase aircraft campaign. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three SIP processes including the rime-splintering, ice-ice collisional breakup and droplet shattering, as well as the mixed-phase overlap factor (mpof) which controls the spatial overlap between liquid and ice clouds within model grid cells. The perturbed ranges of these parameters either match the observed ranges when available or were chosen based on uncertainty ranges suggested by previous studies. For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, Nd and mpof are the most important parameters. Variations of SIP efficiencies have stronger effects in the cumulus region compared to their effects in the stratocumulus region, but their effects on radiative properties are generally weaker compared to the other three parameters (Nd, NINP and mpof). Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero and strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters and can potentially lead to misleading conclusions. This work illustrates the power of using PPEs and model emulation for systematically quantifying the sensitivities of CAO cloud properties to important cloud microphysics parameters and identifying the interactions among model parameters. Exploration of the entire parameter space is compulsory to fully understand the influences on CAO clouds from these parameters, and to constrain the uncertainties from mixed-phase cloud processes on cloud-phase feedback mechanism.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessInteracting effects of aerosols and ice formation processes on mixed-phase cold-air outbreak clouds
Mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories to study mixed-phase cloud processes which are important for our estimation of cloud-phase feedback. These CAO clouds have also been shown vital to the radiative bias over the Southern Ocean. Recent studies show that CAO clouds are sensitive to aerosols including cloud condensation nuclei (CCN) and ice-nucleating particles (INPs), as well as secondary ice production (SIP). Therefore, it is vital to understand how these processes affect the radiative properties of CAO clouds and their roles in the cloud-phase feedback mechanism. However, many modelling studies have investigated the effects of these processes by perturbing model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles (PPEs) of a high-resolution regional model. The selected CAO case was on 24 October 2022 over the Labrador Sea, which coincided with the M-Phase aircraft campaign. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three SIP processes including the rime-splintering, ice-ice collisional breakup and droplet shattering, as well as the mixed-phase overlap factor (mpof) which controls the spatial overlap between liquid and ice clouds within model grid cells. The perturbed ranges of these parameters either match the observed ranges when available or were chosen based on uncertainty ranges suggested by previous studies. For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, Nd and mpof are the most important parameters. Variations of SIP efficiencies have stronger effects in the cumulus region compared to their effects in the stratocumulus region, but their effects on radiative properties are generally weaker compared to the other three parameters (Nd, NINP and mpof). Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero and strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters and can potentially lead to misleading conclusions. This work illustrates the power of using PPEs and model emulation for systematically quantifying the sensitivities of CAO cloud properties to important cloud microphysics parameters and identifying the interactions among model parameters. Exploration of the entire parameter space is compulsory to fully understand the influences on CAO clouds from these parameters, and to constrain the uncertainties from mixed-phase cloud processes on cloud-phase feedback mechanism.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Simulating secondary organic aerosol formation in a global aerosol-climate model
Secondary organic aerosols (SOA), produced via the oxidation of gaseous precursor compounds in the atmosphere, contribute a substantial fraction of atmospheric airborne particles and affect both air quality and climate. Global aerosol-climate models often suffer from very simplified representations of atmospheric SOA formation or missing formation pathways, typically leading to underestimated SOA particle numbers and mass contributions in comparison to observational data. Here, we use the aerosol microphysics submodel MADE3 as part of the global chemistry-climate model EMAC and implement an improved scheme for SOA formation. While MADE3 in its previous version did not account for new particle formation from organic precursors, we included the nucleation parametrization for SOA particles from monoterpene precursors described in Riccobono et al. (2014), which depends on the concentration of sulfuric acid and oxidized organic molecules. Additionally, we consider isoprene as biogenic SOA precursor for the condensation on pre-existing particles, which has been neglected in the previous model version. In addition to biogenic precursors, we also consider anthropogenic precursors for SOA formation, e.g. benzene, toluene, and xylenes from anthropogenic activities like the combustion of fossil fuels. Particle nucleation from these anthropogenic precursors is parametrized similarly to the Riccobono et al. (2014) scheme. We show the effect on particle numbers and SOA mass fractions when using the new SOA scheme and evaluate our simulation results against various observational data sets. When the nucleation parameterization for monoterpene precursors is activated, the total near-surface number concentrations can increase regionally by up to one order of magnitude. With the new SOA scheme, the underestimation of particle numbers and SOA mass fractions in the lower troposphere is reduced and results show an improved agreement with observations. References:Francesco Riccobono et al., Oxidation Products of Biogenic Emissions Contribute to Nucleation of Atmospheric Particles. Science 344, 717 721 (2014). DOI: 10.1126/science.1243527
- 14 March 2026
- Published by Copernicus GmbH
Open AccessSimulating secondary organic aerosol formation in a global aerosol-climate model
Secondary organic aerosols (SOA), produced via the oxidation of gaseous precursor compounds in the atmosphere, contribute a substantial fraction of atmospheric airborne particles and affect both air quality and climate. Global aerosol-climate models often suffer from very simplified representations of atmospheric SOA formation or missing formation pathways, typically leading to underestimated SOA particle numbers and mass contributions in comparison to observational data. Here, we use the aerosol microphysics submodel MADE3 as part of the global chemistry-climate model EMAC and implement an improved scheme for SOA formation. While MADE3 in its previous version did not account for new particle formation from organic precursors, we included the nucleation parametrization for SOA particles from monoterpene precursors described in Riccobono et al. (2014), which depends on the concentration of sulfuric acid and oxidized organic molecules. Additionally, we consider isoprene as biogenic SOA precursor for the condensation on pre-existing particles, which has been neglected in the previous model version. In addition to biogenic precursors, we also consider anthropogenic precursors for SOA formation, e.g. benzene, toluene, and xylenes from anthropogenic activities like the combustion of fossil fuels. Particle nucleation from these anthropogenic precursors is parametrized similarly to the Riccobono et al. (2014) scheme. We show the effect on particle numbers and SOA mass fractions when using the new SOA scheme and evaluate our simulation results against various observational data sets. When the nucleation parameterization for monoterpene precursors is activated, the total near-surface number concentrations can increase regionally by up to one order of magnitude. With the new SOA scheme, the underestimation of particle numbers and SOA mass fractions in the lower troposphere is reduced and results show an improved agreement with observations. References:Francesco Riccobono et al., Oxidation Products of Biogenic Emissions Contribute to Nucleation of Atmospheric Particles. Science 344, 717 721 (2014). DOI: 10.1126/science.1243527
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Targeted model developments to improve consistency of observational constraints and reduce aerosol forcing uncertainty
Uncertainty in aerosol radiative forcing remains high, which limits confidence in climate projections. Climate models depend on uncertain input parameters, and observations are used to constrain this uncertainty by ruling out parameter values that are unlikely. However, it is often not possible to tune a model to agree with multiple observations at the same time. Even when parameter uncertainty is sampled widely, some observational constraints are mutually inconsistent; i.e., they require opposing parameter values and therefore cannot be used together. These inconsistencies in observational constraints indicate structural issues in the way that aerosol processes are modelled, and limit how far parameter uncertainty ranges (and thus forcing estimates) can be reduced.In this presentation, we describe how targeted model developments can help address inconsistencies in observational constraints and thereby help to reduce forcing uncertainty. In previous work, we introduced a workflow to detect potential structural inconsistencies by using a perturbed parameter ensemble (PPE) of the UK Earth System Model. The workflow revealed inter‑region and inter‑variable inconsistencies. For example, sulfate aerosol concentrations in different regions could not be consistently constrained, and constraint of aerosol optical depth degraded model performance for sulfate concentrations.Here, we extend that approach using a new PPE that includes targeted structural changes designed to address the identified deficiencies. We reapply the same observational constraints and test whether the consistency of constraints improves, and whether there are any remaining structural deficiencies. We also assess the connection to aerosol radiative forcing: whether constraints that previously led to opposing aerosol radiative forcing values now align, and whether that alignment leads to more consistent forcing (and less uncertain) values across observational constraints.This work demonstrates a practical path to directly target two interlinked causes of model uncertainty (parametric and structural): use model-observation inconsistencies to diagnose potential structural errors, implement targeted model developments, and iterate. The outcome is an evidence‑based development cycle that aims to make more observations usable simultaneously, reduce parametric and structural uncertainty, and ultimately contribute to reducing uncertainty in climate projections.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessTargeted model developments to improve consistency of observational constraints and reduce aerosol forcing uncertainty
Uncertainty in aerosol radiative forcing remains high, which limits confidence in climate projections. Climate models depend on uncertain input parameters, and observations are used to constrain this uncertainty by ruling out parameter values that are unlikely. However, it is often not possible to tune a model to agree with multiple observations at the same time. Even when parameter uncertainty is sampled widely, some observational constraints are mutually inconsistent; i.e., they require opposing parameter values and therefore cannot be used together. These inconsistencies in observational constraints indicate structural issues in the way that aerosol processes are modelled, and limit how far parameter uncertainty ranges (and thus forcing estimates) can be reduced.In this presentation, we describe how targeted model developments can help address inconsistencies in observational constraints and thereby help to reduce forcing uncertainty. In previous work, we introduced a workflow to detect potential structural inconsistencies by using a perturbed parameter ensemble (PPE) of the UK Earth System Model. The workflow revealed inter‑region and inter‑variable inconsistencies. For example, sulfate aerosol concentrations in different regions could not be consistently constrained, and constraint of aerosol optical depth degraded model performance for sulfate concentrations.Here, we extend that approach using a new PPE that includes targeted structural changes designed to address the identified deficiencies. We reapply the same observational constraints and test whether the consistency of constraints improves, and whether there are any remaining structural deficiencies. We also assess the connection to aerosol radiative forcing: whether constraints that previously led to opposing aerosol radiative forcing values now align, and whether that alignment leads to more consistent forcing (and less uncertain) values across observational constraints.This work demonstrates a practical path to directly target two interlinked causes of model uncertainty (parametric and structural): use model-observation inconsistencies to diagnose potential structural errors, implement targeted model developments, and iterate. The outcome is an evidence‑based development cycle that aims to make more observations usable simultaneously, reduce parametric and structural uncertainty, and ultimately contribute to reducing uncertainty in climate projections.
- Open Access
- 24 February 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Comment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- 24 February 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Open AccessComment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- Open Access
- 21 February 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Comment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.
- 21 February 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-49
Open AccessComment on egusphere-2026-311
Shallow, mixed-phase clouds associated with cold-air outbreak (CAO) events are natural laboratories for studying mixed-phase cloud processes which are important for estimating cloud-phase feedback in the warming climate. Recent studies show that CAO clouds are sensitive to aerosol-cloud interactions and ice formation processes, but many modelling studies perturbed model parameters individually, limiting the investigation of joint effects from multiple processes on cloud properties. Here we investigated how six cloud microphysics parameters jointly affect CAO cloud properties by building model emulators trained on output from perturbed parameter ensembles of a high-resolution regional model. The parameters are cloud droplet number concentration (Nd), ice-nucleating particle concentration (NINP), efficiencies of three secondary ice production processes, as well as the mixed-phase overlap factor (mpof). For the CAO case studied, Nd and NINP most strongly control the cloud radiative properties in the stratocumulus region; whereas in the cumulus region, effects from varying Nd and mpof are the strongest. Our results show that these parameters have non-linear joint effects such that the magnitude and even sign of cloud responses to a parameter are highly dependent on the values of other parameters. For example, the sensitivity of cloud albedo to increases in NINP varies between near zero to strongly negative across the sampled parameter space. Therefore, perturbing parameters individually is an inadequate method for determining the cloud responses to model parameters. This work demonstrates the power of model emulation and the importance of a full exploration of parameter space in order to understand the factors controlling cloud properties.