Chen Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Chen Zhang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Haifeng Zhang
University of North Texas
9 shared publications - Abhishek Ghosh
Biomedical Engineering, University of Michigan, Beal Ave, Ann Arbor, Michigan, 48109-1382, UNITED STATES
5 shared publications - Shuai Ju
University of North Texas
3 shared publications Parham Zahedinejad
University of North Texas, Denton, TX, USA
2 shared publicationsSujan Yenuganti
2 shared publicationsFelix Wu
Department of Energy, Washington, District of Columbia, UNITED STATES
1 shared publication
Latest Publications
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 68 (12) , 3616-3623
SC-Cut Quartz Resonators for Dynamic Liquid Viscosity Measurements
This article proposes an innovative viscosity sensor based on the thickness-shear vibration of stress compensated (SC)-cut quartz resonator. The thickness-shear mode is first analyzed and further studied with fluid-structure interaction between the resonator and the viscous fluid loading. The characteristic equation is derived based on the 3-D linear piezoelectric equations and solved for sensitivity analysis. Then laboratory experiment is carried out to validate the theory. To conduct the viscosity measurement, the SC-cut quartz resonator is integrated with a U-tube test fixture, which is designed and fabricated for sensor housing to avoid the influence of the mass of the fluid. The resonator is tested with various viscosities by tuning the ratio of glycerol/water mixture. Experiment results show consistency with the analytical solution, which together present an improved sensitivity of viscosity measurement by using SC-cut quartz resonator comparing to other resonator-based viscosity sensors. The proposed viscosity sensor is sensitive, accurate, and portable, and therefore can be applied to real-time, on-site measurement or sampling of fluidic samples.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 68 (12) , 3616-3623
SC-Cut Quartz Resonators for Dynamic Liquid Viscosity Measurements
This article proposes an innovative viscosity sensor based on the thickness-shear vibration of stress compensated (SC)-cut quartz resonator. The thickness-shear mode is first analyzed and further studied with fluid-structure interaction between the resonator and the viscous fluid loading. The characteristic equation is derived based on the 3-D linear piezoelectric equations and solved for sensitivity analysis. Then laboratory experiment is carried out to validate the theory. To conduct the viscosity measurement, the SC-cut quartz resonator is integrated with a U-tube test fixture, which is designed and fabricated for sensor housing to avoid the influence of the mass of the fluid. The resonator is tested with various viscosities by tuning the ratio of glycerol/water mixture. Experiment results show consistency with the analytical solution, which together present an improved sensitivity of viscosity measurement by using SC-cut quartz resonator comparing to other resonator-based viscosity sensors. The proposed viscosity sensor is sensitive, accurate, and portable, and therefore can be applied to real-time, on-site measurement or sampling of fluidic samples.
- 10 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 68 (6) , 2271-2276
Measurement of the Second-Order Material Constants of Lanthanum-Gallium Tantalate (LGT) Through Ultrasound
Lanthanum-gallium tantalate (LGT) is a member of the LGX crystal family (langasite, langanite, and langatate) known for high-quality factor and stability at higher temperatures. These characteristics enable filters and sensors for use in harsh environments. Accurate values for the second-order material constants are required for electromechanical modeling of such devices. A sufficient set of bulk acoustic wave (BAW) propagation velocities have been measured in cube-shaped samples to obtain the full set of second-order elastic and piezoelectric material constants along with the experimental uncertainties. The cross correlation method was used to accurately measure the time-of-flight (TOF) values between the first two back-wall echoes under a constant room-temperature environment. The calculated BAW velocities and extracted material constants show good agreement with earlier work.
- 10 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 68 (6) , 2271-2276
Measurement of the Second-Order Material Constants of Lanthanum-Gallium Tantalate (LGT) Through Ultrasound
Lanthanum-gallium tantalate (LGT) is a member of the LGX crystal family (langasite, langanite, and langatate) known for high-quality factor and stability at higher temperatures. These characteristics enable filters and sensors for use in harsh environments. Accurate values for the second-order material constants are required for electromechanical modeling of such devices. A sufficient set of bulk acoustic wave (BAW) propagation velocities have been measured in cube-shaped samples to obtain the full set of second-order elastic and piezoelectric material constants along with the experimental uncertainties. The cross correlation method was used to accurately measure the time-of-flight (TOF) values between the first two back-wall echoes under a constant room-temperature environment. The calculated BAW velocities and extracted material constants show good agreement with earlier work.
- 4 September 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 128 (9) , 094504
Selective H2 sensing using lanthanum doped zinc oxide thin film: A study of temperature dependence H2 sensing effect on carrier reversal activity
In the present work, we have demonstrated a highly sensitive H2 gas sensor using a lanthanum doped ZnO (La_ZnO) thin film operated at 300 °C. Also, a p-type to n-type carrier reversal activity is revealed in the presence of H2 gas species, which predominantly depends on the operating temperature and doping concentration of lanthanum. Pure and La_ZnO (1–10 at. %) thin films were successfully synthesized using a sol-gel route, where a 5 at. % lanthanum doped ZnO thin film shows an outstanding H2 gas sensitivity (400%) among all other samples with an optimized temperature of 300 °C. Moreover, this sensor actively responds to a wide H2 gas concentration (10–500 ppm) with a sensitivity of 0.9 (∼n). Additionally, H2 gas sensing selectivity and mixed gas sensing performance were investigated in the presence of CO and CO2 gas species at optimized temperature (300 °C). Results show that the pure and 1–3 at. % La_ZnO thin films exhibited n-type H2 gas sensing, while p-type sensing behavior was observed for 5% and 10% La_ZnO thin films at 300 °C. It is further observed that O− species are extremely active to CO gas species operating at a high operating temperature (>250 °C). Therefore, despite the emerging p-type behavior of the sensor, the ejected electrons are expected to dominantly reduce the sensor resistance in the presence of CO gas species at 350 °C. The improvement of H2 sensing is further interrelated with the defect levels using Raman spectroscopy.
- 4 September 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 128 (9) , 094504
Selective H2 sensing using lanthanum doped zinc oxide thin film: A study of temperature dependence H2 sensing effect on carrier reversal activity
In the present work, we have demonstrated a highly sensitive H2 gas sensor using a lanthanum doped ZnO (La_ZnO) thin film operated at 300 °C. Also, a p-type to n-type carrier reversal activity is revealed in the presence of H2 gas species, which predominantly depends on the operating temperature and doping concentration of lanthanum. Pure and La_ZnO (1–10 at. %) thin films were successfully synthesized using a sol-gel route, where a 5 at. % lanthanum doped ZnO thin film shows an outstanding H2 gas sensitivity (400%) among all other samples with an optimized temperature of 300 °C. Moreover, this sensor actively responds to a wide H2 gas concentration (10–500 ppm) with a sensitivity of 0.9 (∼n). Additionally, H2 gas sensing selectivity and mixed gas sensing performance were investigated in the presence of CO and CO2 gas species at optimized temperature (300 °C). Results show that the pure and 1–3 at. % La_ZnO thin films exhibited n-type H2 gas sensing, while p-type sensing behavior was observed for 5% and 10% La_ZnO thin films at 300 °C. It is further observed that O− species are extremely active to CO gas species operating at a high operating temperature (>250 °C). Therefore, despite the emerging p-type behavior of the sensor, the ejected electrons are expected to dominantly reduce the sensor resistance in the presence of CO gas species at 350 °C. The improvement of H2 sensing is further interrelated with the defect levels using Raman spectroscopy.
- 23 March 2020
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (5) , 055002
Miniaturized langasite MEMS micro-cantilever beam structured resonator for high temperature gas sensing
In this paper, a miniaturized lanthanum gallium silicate (langasite, LGS, La 3 Ga 5 SiO 14 ) micro-electromechanical systems (MEMS) micro-cantilever beam structured resonator is proposed for high temperature gas sensing applications. The proposed MEMS gas sensor is based on the thickness-shear vibration of the high temperature piezoelectric substrate, LGS, which is fabricated with bulk and surface micromachining technology. The fabrication process is optimized for better stability and integrity of the proposed LGS MEMS gas sensor. In order to improve the gas sensing sensitivity, the sample is further deposited with ZnO nanorods, where abundant gas molecules are expected to be adsorbed. Laboratory tests are subsequently carried out to validate the sensor’s response to various gas species, verify the adsorption mechanism, and investigate the sensitivity of the proposed gas sensor. Results show that compared to several resonator-based gas sensors, the proposed gas sensor displays a better sensitivity for CO 2 sensing. The cross-sensitivity of ZnO nanorods between various gas species can be further addressed by principal component analysis technology, where important features can be extracted to distinguish between different gas species and/or concentrations. The proposed MEMS LGS resonator can be utilized for harsh environment applications, such as turbine-engine combustion chambers, nuclear power plants, and hazardous chemical industries, where high temperature can hamper most room temperature gas sensors. Combined with appropriate machine learning technology, the proposed gas sensor can be a good alternative to expensive, bulky gas chromatography devices.
- 23 March 2020
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (5) , 055002
Miniaturized langasite MEMS micro-cantilever beam structured resonator for high temperature gas sensing
In this paper, a miniaturized lanthanum gallium silicate (langasite, LGS, La 3 Ga 5 SiO 14 ) micro-electromechanical systems (MEMS) micro-cantilever beam structured resonator is proposed for high temperature gas sensing applications. The proposed MEMS gas sensor is based on the thickness-shear vibration of the high temperature piezoelectric substrate, LGS, which is fabricated with bulk and surface micromachining technology. The fabrication process is optimized for better stability and integrity of the proposed LGS MEMS gas sensor. In order to improve the gas sensing sensitivity, the sample is further deposited with ZnO nanorods, where abundant gas molecules are expected to be adsorbed. Laboratory tests are subsequently carried out to validate the sensor’s response to various gas species, verify the adsorption mechanism, and investigate the sensitivity of the proposed gas sensor. Results show that compared to several resonator-based gas sensors, the proposed gas sensor displays a better sensitivity for CO 2 sensing. The cross-sensitivity of ZnO nanorods between various gas species can be further addressed by principal component analysis technology, where important features can be extracted to distinguish between different gas species and/or concentrations. The proposed MEMS LGS resonator can be utilized for harsh environment applications, such as turbine-engine combustion chambers, nuclear power plants, and hazardous chemical industries, where high temperature can hamper most room temperature gas sensors. Combined with appropriate machine learning technology, the proposed gas sensor can be a good alternative to expensive, bulky gas chromatography devices.
- 10 December 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (1) , 015039
Langasite-based surface acoustic wave resonator for acetone vapor sensing
High concentration of acetone sensing is of an increasing interest due to its particular application in health monitoring for medical use as well as chemical industries. This paper proposes an advanced sensor that is based off of a Langasite (LGS) surface acoustic wave (SAW) resonator for acetone vapor sensing/detection. The detection of acetone vapor is based off of the chemo-resistive adsorption of pre-installed air on the LGS resonator surface, which will be significantly reduced via chemical reaction and lead to resonant frequency drift of the resonator. Lab tests of acetone vapor sensing are carried out with various concentration at various operating temperature (50 °C–200 °C). The sensitivity is investigated numerically and experimentally, where a rigorous proportionality between frequency drift and acetone concentration is observed and the temperature effect is further discussed. Compared to the conventional SAW gas sensor, the proposed acetone sensor employs the SAW piezoelectric substrate, LGS, as the sensing material, which not only eliminates the use of extra sensing thin film and consequently reduce the cost of fabrication, but also provides a promising high temperature stability due to the nature of LGS. Therefore, the proposed acetone sensor is of low cost, high sensitivity, and low maintenance, which can be further miniaturized and simplified for MEMS application and real environment acetone sensing in health monitoring.
- 10 December 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (1) , 015039
Langasite-based surface acoustic wave resonator for acetone vapor sensing
High concentration of acetone sensing is of an increasing interest due to its particular application in health monitoring for medical use as well as chemical industries. This paper proposes an advanced sensor that is based off of a Langasite (LGS) surface acoustic wave (SAW) resonator for acetone vapor sensing/detection. The detection of acetone vapor is based off of the chemo-resistive adsorption of pre-installed air on the LGS resonator surface, which will be significantly reduced via chemical reaction and lead to resonant frequency drift of the resonator. Lab tests of acetone vapor sensing are carried out with various concentration at various operating temperature (50 °C–200 °C). The sensitivity is investigated numerically and experimentally, where a rigorous proportionality between frequency drift and acetone concentration is observed and the temperature effect is further discussed. Compared to the conventional SAW gas sensor, the proposed acetone sensor employs the SAW piezoelectric substrate, LGS, as the sensing material, which not only eliminates the use of extra sensing thin film and consequently reduce the cost of fabrication, but also provides a promising high temperature stability due to the nature of LGS. Therefore, the proposed acetone sensor is of low cost, high sensitivity, and low maintenance, which can be further miniaturized and simplified for MEMS application and real environment acetone sensing in health monitoring.
- Top Cited Papers
- 1 December 2019
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 301
High temperature CO2 sensing and its cross-sensitivity towards H2 and CO gas using calcium doped ZnO thin film coated langasite SAW sensor
- 1 December 2019
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 301
Top Cited PapersHigh temperature CO2 sensing and its cross-sensitivity towards H2 and CO gas using calcium doped ZnO thin film coated langasite SAW sensor
- 1 May 2019
- Published by Elsevier in Mechatronics
- Vol. 59, 189-198
Quartz Crystal Microbalance for viscosity measurement with temperature self-compensation
- 1 May 2019
- Published by Elsevier in Mechatronics
- Vol. 59, 189-198
Quartz Crystal Microbalance for viscosity measurement with temperature self-compensation
- 1 May 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 28 (6) , 065012
Sensitivity analysis of piezo-driven stepped cantilever beams for simultaneous viscosity and density measurement
This paper presents a study on the sensitivity analysis of a smart sensing system for simultaneous measurement of a viscous fluid’s viscosity and density. The proposed system is based on a piezo-driven Euler–Bernoulli (cantilever) beam. Three stepped cantilever beams of varying widths were fabricated to investigate the sensitivity in relation to cantilever design. Mathematical modeling was first derived based on the Stokes’ law and Euler–Bernoulli equations. Based on the modeling, numerical simulation was conducted and the vibration spectrums of cantilever beams with viscous fluid loading were analyzed. Results show that the resonant frequency and vibration amplitude of the proposed sensing system is sensitive to both the dynamic viscosity and the density of the sample fluid. To verify the numerical results, laboratory experiments were performed. The experimental results are congruent with the numerical results Furthermore, the two-step cantilever beam proved to have the highest sensitivity for viscosity measurement when compared with the other configurations. The proposed sensing system can also be downsized into the micro domain for high temperature engine oil viscometers for use in the automobile industry or can be applied to early age concrete curing process monitoring.
- 1 May 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 28 (6) , 065012
Sensitivity analysis of piezo-driven stepped cantilever beams for simultaneous viscosity and density measurement
This paper presents a study on the sensitivity analysis of a smart sensing system for simultaneous measurement of a viscous fluid’s viscosity and density. The proposed system is based on a piezo-driven Euler–Bernoulli (cantilever) beam. Three stepped cantilever beams of varying widths were fabricated to investigate the sensitivity in relation to cantilever design. Mathematical modeling was first derived based on the Stokes’ law and Euler–Bernoulli equations. Based on the modeling, numerical simulation was conducted and the vibration spectrums of cantilever beams with viscous fluid loading were analyzed. Results show that the resonant frequency and vibration amplitude of the proposed sensing system is sensitive to both the dynamic viscosity and the density of the sample fluid. To verify the numerical results, laboratory experiments were performed. The experimental results are congruent with the numerical results Furthermore, the two-step cantilever beam proved to have the highest sensitivity for viscosity measurement when compared with the other configurations. The proposed sensing system can also be downsized into the micro domain for high temperature engine oil viscometers for use in the automobile industry or can be applied to early age concrete curing process monitoring.
- 23 March 2019
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 28 (7) , 699-708
Sensitivity analysis of multilayered C-axis inclined zigzag zinc oxide thin-film bulk acoustic resonators for CO2 concentration monitoring
This paper proposes a theoretical analysis of an innovative C-axis inclined zigzag multilayered ZnO thin-film bulk acoustic resonator (FBAR) for CO2 concentration monitoring. Analytical study is carried out with 3-D linear piezoelectric equations with appropriate boundary conditions. Numerical results show that the thickness of FBAR has a constant influence on the sensitivity while C-axis inclined angle has a significant influence on the sensitivity for the longitudinal mode of multilayered (double-layered in this paper) FBAR CO2 sensor. The selectivity and sensitivity of the proposed sensor can be further improved by the dopant in ZnO FBAR for real environment monitoring.
- 23 March 2019
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 28 (7) , 699-708
Sensitivity analysis of multilayered C-axis inclined zigzag zinc oxide thin-film bulk acoustic resonators for CO2 concentration monitoring
This paper proposes a theoretical analysis of an innovative C-axis inclined zigzag multilayered ZnO thin-film bulk acoustic resonator (FBAR) for CO2 concentration monitoring. Analytical study is carried out with 3-D linear piezoelectric equations with appropriate boundary conditions. Numerical results show that the thickness of FBAR has a constant influence on the sensitivity while C-axis inclined angle has a significant influence on the sensitivity for the longitudinal mode of multilayered (double-layered in this paper) FBAR CO2 sensor. The selectivity and sensitivity of the proposed sensor can be further improved by the dopant in ZnO FBAR for real environment monitoring.
- 1 April 2017
- Published by Elsevier in Measurement
- Vol. 101, 15-18
PMN-PT based smart sensing system for viscosity and density measurement
- 1 April 2017
- Published by Elsevier in Measurement
- Vol. 101, 15-18
PMN-PT based smart sensing system for viscosity and density measurement