RZRunhu Zhang

Runhu Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Runhu Zhang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Adsorption of Methyl Orange from Aqueous Solution Using Chitosan/ZSM-5 Composite

    by Mencui Ning, Runhu Zhang

    In this work, a chitosan/ZSM-5 composite was prepared as an adsorbent to remove methyl orange (MO) from aqueous solutions. The material’s morphological features and surface functional groups were examined using scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) spectroscopy. Batch experiments were carried out to investigate the effect of adsorption time, adsorption isotherms, pH effect and thermodynamics. Adsorption kinetics indicated a fast adsorption rate and reached an equilibrium within 60 min; Adsorption capacity was maximum at pH=4.0; The experimental data fitted better to Langmuir than to Freundlich isotherm equation, while the sorption process was described by pseudo-second-order model. The thermodynamic analysis of the removal reaction carried out at three temperatures: 293K, 303K,313K and 323K gave following values (ΔH°=−44.75 kJ mol−1). The values for ΔG° were between –1.06 and –5.12 kJ·mol-1 while ΔS° was equal to –135.26 J·mol-1·K-1. Thermodynamic analysis shows spontaneous adsorption process at the given conditions that are feasible and exothermic in nature. These results indicate that chitosan/ZSM-5 composite materials hold promising potential for the removal of MO from aqueous environments.

  • Open Access

    Degradation of Methyl Orange Using Fe-ZSM5 Zeolite as a Heterogeneous Fenton Catalyst

    by Mencui Ning, Runhu Zhang

    Fe-ZSM5 zeolite materials were prepared via solid-state ion exchange and comprehensively characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The XRD patterns confirm the successful loading of iron species onto the ZSM-5 support. These materials served as heterogeneous Fenton catalysts for the degradation of methyl orange in simulated wastewater. Key operational parameters—including initial pH, H2O2 concentration, catalyst dosage, and reaction temperature—were systematically evaluated to assess their effects on decolorization efficiency. The results indicated that under optimal conditions (initial pH of 3.0, H2O2 concentration of 0.3 mol/L, catalyst dosage of 1.6 g/L, reaction temperature of 30 °C), a decolorization efficiency of 92.58% was achieved within 60 min. This study demonstrates that Fe-ZSM5 zeolite is a robust and efficient catalyst for heterogeneous Fenton-based degradation of organic dyes in aqueous systems.

  • Open Access

    Catalytic Decomposition of N2O over Cu–Zn/ZnAl2O4 Catalysts

    by Xiaoying Zheng, Runhu Zhang, Fang Bai, Chao Hua

    The catalytic decomposition of N2O was investigated over Cu-Zn/ZnAl2O4 catalysts in the temperature range of 400–650 °C Catalytic samples have been prepared by wet impregnation method. Prepared catalysts were characterized using several techniques like BET surface area, X-ray diffraction (XRD), and Scanning electron microscopy (SEM). The Cu-Zn/ZnAl2O4 showed higher catalytic performance along with long term stability during N2O decomposition. The Cu-Zn/ZnAl2O4 catalysts yielded 100% N2O conversion at 650 °C. The Cu-Zn/ZnAl2O4 catalysts are promising for decrease this strong greenhouse gas in the chemical industry.


  • Adsorption of methyl orange from aqueous solution using chitosan/diatomite composite

    by Peng Zhao, Runhu Zhang, Jianglin Wang

    A novel chitosan/diatomite composite was prepared by a simple mixture in the mass ratio to remove methyl orange (MO) from aqueous media in this study. The composite adsorbent was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy analysis. The parameters to influence the adsorption of MO were studied under such conditions as kinetics, adsorption isotherm, pH effect, and thermodynamics. The results revealed that adsorption of MO was initially rapid and the equilibrium time was reached after 40 min. The optimal value of the pH was 5.0 for better adsorption. The equilibrium data were well fitted to the Langmuir isotherm compared to the Freundlich isotherm, and exhibited the highest capacity and a removal rate of 88.37% under an initial dye concentration of 50 mg/L. The kinetic data were well described by the pseudo-second order model. The thermodynamic calculations revealed that the sorption was viable, spontaneous, and exothermic under the conditions studied. In addition, the chitosan/diatomite composite had good adsorption and desorption performance with respect to reusability after six cycles. These results showed that the chitosan/diatomite could be considered as a potential adsorbent for the removal of MO in aqueous solution.


  • Open Access

    N2O Decomposition over Cu–Zn/γ–Al2O3 Catalysts

    by Runhu Zhang, Chao Hua, Bingshuai Wang, Yan Jiang

    Cu–Zn/γ–Al2O3 catalysts were prepared by the impregnation method. Catalytic activity was evaluated for N2O decomposition in a fixed bed reactor. The fresh and used catalysts were characterized by several techniques such as BET surface area, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The Cu–Zn/γ–Al2O3 catalysts exhibit high activity and stability for N2O decomposition in mixtures simulating real gas from adipic acid production, containing N2O, O2, NO, CO2, and CO. Over the Cu–Zn/γ–Al2O3 catalysts, 100% of N2O conversion was obtained at about 601 °C at a gas hourly space velocity (GHSV) of 7200 h−1. Cu–Zn/γ–Al2O3 catalysts also exhibited considerably good durability, and no obvious activity loss was observed in the 100 h stability test. The Cu–Zn/γ–Al2O3 catalysts are promising for the abatement of this powerful greenhouse gas in the chemical industry, particularly in adipic acid production.


  • Open Access

    Removal of chromium (VI) from aqueous solutions using activated carbon prepared from crofton weed

    by Ping Wang, Runhu Zhang, Chao Hua

    Activated carbon from crofton weed (ACCW) was evaluated for its ability to remove Cr(VI) from aqueous solutions. Batch experiments were used to examine kinetics, adsorption isotherm, pH effect, and thermodynamic parameters. Adsorption data for Cr(VI) uptake by ACCW were analyzed according to Langmuir and Freundlich adsorption models. Thermodynamic parameters for the adsorption system were determinated at 293, 303, and 313 K (ΔH° = 15.02 kJ mol−1; ΔG° = −0.76 to −2.91 kJ mol−1, and ΔS° = 53.85 J K−1 mol−1). The ΔG° values obtained were negative, indicating that the adsorption of Cr(VI) on the surface of ACCW was a spontaneous adsorption process. The kinetics of this process was described very well by a pseudo-second-order rate equation. These results show that the ACCW could be considered as a potential adsorbent for Cr(VI) in aqueous solutions.


  • Adsorption of phenol from aqueous solutions using activated carbon prepared from crofton weed

    by Chao Hua, Runhu Zhang, Li Li, Xiaoying Zheng

    Activated carbon derived from crofton weed (ACCW) was evaluated for its ability to remove phenol from an aqueous solution. The kinetics study, adsorption isotherm, pH effect, and thermodynamic study were examined in batch experiments. Adsorption data for phenol uptake by ACCW were analyzed according to Langmuir, Freundlich and Temkin adsorption models. Thermodynamic parameters for the adsorption system were determined at 293 K, 313 K and 333 K (ΔH° = −22.92 kJ mol−1; ΔG° = −2.87 to −5.28 kJ mol−1 and ΔS° = −60.20 J/K·mol). ΔG° v alues obtained were negative, indicated that the adsorption of the phenol on the surface of ACCW was a spontaneous adsorption process. The kinetics process can be described by a pseudosecond-order rate equation very well. These results show that the ACCW could be considered as a potential adsorbent for phenol in aqueous solutions.