Javier Principe
Javier Principe has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Ramon Codina
Universitat Politecnica de Catalunya, Barcelona, Spain
17 shared publications - Santiago Badia
School of Mathematics Monash University 3800 Clayton Victoria Australia
13 shared publications - Alberto F. Martin
Universitat Politecnica de Catalunya
7 shared publications - Matias Avila
Barcelona Supercomputing Centre, Barcelona, Spain
5 shared publications - Joan Baiges
International Centre for Numerical Methods in Engineering, Barcelona, Spain
3 shared publications - Francesco Pesavento
University of Padova
2 shared publications
Latest Publications
- Open Access
- 4 February 2026
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 452
Topology optimisation-based design of duct cross-sections for fully developed magnetohydrodynamic flows
- 4 February 2026
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 452
Open AccessTopology optimisation-based design of duct cross-sections for fully developed magnetohydrodynamic flows
- Open Access
- 24 November 2025
- Published by Elsevier in Computers & Structures
- Vol. 320
Parallel topology optimization introducing enclosed cavity manufacturing constraints based on graph search algorithms
- 24 November 2025
- Published by Elsevier in Computers & Structures
- Vol. 320
Open AccessParallel topology optimization introducing enclosed cavity manufacturing constraints based on graph search algorithms
- 16 November 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 433
Anisotropic variational mesh adaptation for embedded finite element methods
- 16 November 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 433
Anisotropic variational mesh adaptation for embedded finite element methods
- 29 May 2023
- Published by Elsevier in Mathematics and Computers in Simulation
- Vol. 213, 18-39
A massively parallel implementation of multilevel Monte Carlo for finite element models
- 29 May 2023
- Published by Elsevier in Mathematics and Computers in Simulation
- Vol. 213, 18-39
A massively parallel implementation of multilevel Monte Carlo for finite element models
- Open Access
- 10 August 2022
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 228
On the use of ensemble averaging techniques to accelerate the Uncertainty Quantification of CFD predictions in wind engineering
- 10 August 2022
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 228
Open AccessOn the use of ensemble averaging techniques to accelerate the Uncertainty Quantification of CFD predictions in wind engineering
- Open Access
A robust and scalable unfitted adaptive finite element framework for nonlinear solid mechanics
In this work, we bridge standard adaptive mesh refinement and coarsening on scalable octree background meshes and robust unfitted finite element formulations for the automatic and efficient solution of large-scale nonlinear solid mechanics problems posed on complex geometries, as an alternative to standard body-fitted formulations, unstructured mesh generation and graph partitioning strategies. We pay special attention to those aspects requiring a specialized treatment in the extension of the unfitted h-adaptive aggregated finite element method on parallel tree-based adaptive meshes, recently developed for linear scalar elliptic problems, to handle nonlinear problems in solid mechanics. In order to accurately and efficiently capture localized phenomena that frequently occur in nonlinear solid mechanics problems, we perform pseudo time-stepping in combination with h-adaptive dynamic mesh refinement and rebalancing driven by a-posteriori error estimators. The method is implemented considering both irreducible and mixed (u/p) formulations and thus it is able to robustly face problems involving incompressible materials. In the numerical experiments, both formulations are used to model the inelastic behavior of a wide range of compressible and incompressible materials. First, a selected set of benchmarks are reproduced as a verification step. Second, a set of experiments is presented with problems involving complex geometries. Among them, we model a cantilever beam problem with spherical hollows distributed in a Simple Cubic array. This test involves a discrete domain with up to 11.7M Degrees Of Freedom solved in less than two hours on 3072 cores of a parallel supercomputer.
Open AccessA robust and scalable unfitted adaptive finite element framework for nonlinear solid mechanics
In this work, we bridge standard adaptive mesh refinement and coarsening on scalable octree background meshes and robust unfitted finite element formulations for the automatic and efficient solution of large-scale nonlinear solid mechanics problems posed on complex geometries, as an alternative to standard body-fitted formulations, unstructured mesh generation and graph partitioning strategies. We pay special attention to those aspects requiring a specialized treatment in the extension of the unfitted h-adaptive aggregated finite element method on parallel tree-based adaptive meshes, recently developed for linear scalar elliptic problems, to handle nonlinear problems in solid mechanics. In order to accurately and efficiently capture localized phenomena that frequently occur in nonlinear solid mechanics problems, we perform pseudo time-stepping in combination with h-adaptive dynamic mesh refinement and rebalancing driven by a-posteriori error estimators. The method is implemented considering both irreducible and mixed (u/p) formulations and thus it is able to robustly face problems involving incompressible materials. In the numerical experiments, both formulations are used to model the inelastic behavior of a wide range of compressible and incompressible materials. First, a selected set of benchmarks are reproduced as a verification step. Second, a set of experiments is presented with problems involving complex geometries. Among them, we model a cantilever beam problem with spherical hollows distributed in a Simple Cubic array. This test involves a discrete domain with up to 11.7M Degrees Of Freedom solved in less than two hours on 3072 cores of a parallel supercomputer.
- Open Access
Embedded multilevel Monte Carlo for uncertainty quantification in random domains
The multilevel Monte Carlo (MLMC) method has proven to be an effective variance-reduction statistical method for Uncertainty quantification in PDE models. It combines approximations at different levels of accuracy using a hierarchy of meshes in a similar way as multigrid. The generation of body-fitted mesh hierarchies is only possible for simple geometries. On top of that, MLMC for random domains involves the generation of a mesh for every sample. Instead, here we consider the use of embedded methods which make use of simple background meshes of an artificial domain (a bounding-box) for which it is easy to define a mesh hierarchy, thus eliminating the need of body-fitted unstructured meshes, but can produce ill-conditioned discrete problems. To avoid this complication, we consider the recent aggregated finite element method (AgFEM). In particular, we design an embedded MLMC framework for (geometrically and topologically) random domains implicitly defined through a random level-set function, which makes use of a set of hierarchical background meshes and the AgFEM. Performance predictions from existing theory are verified statistically in three numerical experiments, namely the solution of the Poisson equation on a circular domain of random radius, the solution of the Poisson equation on a topologically identical but more complex domain, and the solution of a heat-transfer problem in a domain that has geometric and topological uncertainties. Finally, the use of AgFE is statistically demonstrated to be crucial for complex and uncertain geometries in terms of robustness and computational cost.
Open AccessEmbedded multilevel Monte Carlo for uncertainty quantification in random domains
The multilevel Monte Carlo (MLMC) method has proven to be an effective variance-reduction statistical method for Uncertainty quantification in PDE models. It combines approximations at different levels of accuracy using a hierarchy of meshes in a similar way as multigrid. The generation of body-fitted mesh hierarchies is only possible for simple geometries. On top of that, MLMC for random domains involves the generation of a mesh for every sample. Instead, here we consider the use of embedded methods which make use of simple background meshes of an artificial domain (a bounding-box) for which it is easy to define a mesh hierarchy, thus eliminating the need of body-fitted unstructured meshes, but can produce ill-conditioned discrete problems. To avoid this complication, we consider the recent aggregated finite element method (AgFEM). In particular, we design an embedded MLMC framework for (geometrically and topologically) random domains implicitly defined through a random level-set function, which makes use of a set of hierarchical background meshes and the AgFEM. Performance predictions from existing theory are verified statistically in three numerical experiments, namely the solution of the Poisson equation on a circular domain of random radius, the solution of the Poisson equation on a topologically identical but more complex domain, and the solution of a heat-transfer problem in a domain that has geometric and topological uncertainties. Finally, the use of AgFE is statistically demonstrated to be crucial for complex and uncertain geometries in terms of robustness and computational cost.
- Open Access
- 12 January 2018
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 3 (1) , 014202
Driving mechanisms and streamwise homogeneity in molecular dynamics simulations of nanochannel flows
In molecular dynamics simulations, nanochannel flows are usually driven by a constant force, that aims to represent a pressure difference between inlet and outlet, and periodic boundary conditions are applied in the streamwise direction resulting in an homogeneous flow. The homogeneity hypothesis can be eliminated adding reservoirs at the inlet and outlet of the channel which permits us to predict streamwise variation of flow properties. It also opens the door to drive the flow by applying a pressure gradient instead of a constant force. We analyze the impact of these modeling modifications in the prediction of the flow properties, and we show when they make a difference with respect to the standard approach. It turns out that both assumptions are irrelevant when low pressure differences are considered, but important differences are observed at high pressure differences. They include the density and velocity variation along the channel (the mass flow rate is constant) but, more importantly, the temperature increase and slip length decrease. Because viscous heating is important at high shear rates, these modeling issues are also linked to the use of thermostating procedures. Specifically, selecting the region where the thermostat is applied has a critical influence on the results. Whereas in the traditional homogeneous model the choices are limited to the fluid and/or the wall, in the inhomogeneous cases the reservoirs are also available, which permits us to leave the region of interest, the channel, unperturbed.
- 12 January 2018
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 3 (1) , 014202
Open AccessDriving mechanisms and streamwise homogeneity in molecular dynamics simulations of nanochannel flows
In molecular dynamics simulations, nanochannel flows are usually driven by a constant force, that aims to represent a pressure difference between inlet and outlet, and periodic boundary conditions are applied in the streamwise direction resulting in an homogeneous flow. The homogeneity hypothesis can be eliminated adding reservoirs at the inlet and outlet of the channel which permits us to predict streamwise variation of flow properties. It also opens the door to drive the flow by applying a pressure gradient instead of a constant force. We analyze the impact of these modeling modifications in the prediction of the flow properties, and we show when they make a difference with respect to the standard approach. It turns out that both assumptions are irrelevant when low pressure differences are considered, but important differences are observed at high pressure differences. They include the density and velocity variation along the channel (the mass flow rate is constant) but, more importantly, the temperature increase and slip length decrease. Because viscous heating is important at high shear rates, these modeling issues are also linked to the use of thermostating procedures. Specifically, selecting the region where the thermostat is applied has a critical influence on the results. Whereas in the traditional homogeneous model the choices are limited to the fluid and/or the wall, in the inhomogeneous cases the reservoirs are also available, which permits us to leave the region of interest, the channel, unperturbed.
- Open Access
- 11 October 2017
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 25 (2) , 195-271
FEMPAR: An Object-Oriented Parallel Finite Element Framework
FEMPAR is an open source object oriented Fortran200X scientific software library for the high-performance scalable simulation of complex multiphysics problems governed by partial differential equations at large scales, by exploiting state-of-the-art supercomputing resources. It is a highly modularized, flexible, and extensible library, that provides a set of modules that can be combined to carry out the different steps of the simulation pipeline. FEMPAR includes a rich set of algorithms for the discretization step, namely (arbitrary-order) grad, div, and curl-conforming finite element methods, discontinuous Galerkin methods, B-splines, and unfitted finite element techniques on cut cells, combined with h-adaptivity. The linear solver module relies on state-of-the-art bulk-asynchronous implementations of multilevel domain decomposition solvers for the different discretization alternatives and block-preconditioning techniques for multiphysics problems. FEMPAR is a framework that provides users with out-of-the-box state-of-the-art discretization techniques and highly scalable solvers for the simulation of complex applications, hiding the dramatic complexity of the underlying algorithms. But it is also a framework for researchers that want to experience with new algorithms and solvers, by providing a highly extensible framework. In this work, the first one in a series of articles about FEMPAR, we provide a detailed introduction to the software abstractions used in the discretization module and the related geometrical module. We also provide some ingredients about the assembly of linear systems arising from finite element discretizations, but the software design of complex scalable multilevel solvers is postponed to a subsequent work.
- 11 October 2017
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 25 (2) , 195-271
Open AccessFEMPAR: An Object-Oriented Parallel Finite Element Framework
FEMPAR is an open source object oriented Fortran200X scientific software library for the high-performance scalable simulation of complex multiphysics problems governed by partial differential equations at large scales, by exploiting state-of-the-art supercomputing resources. It is a highly modularized, flexible, and extensible library, that provides a set of modules that can be combined to carry out the different steps of the simulation pipeline. FEMPAR includes a rich set of algorithms for the discretization step, namely (arbitrary-order) grad, div, and curl-conforming finite element methods, discontinuous Galerkin methods, B-splines, and unfitted finite element techniques on cut cells, combined with h-adaptivity. The linear solver module relies on state-of-the-art bulk-asynchronous implementations of multilevel domain decomposition solvers for the different discretization alternatives and block-preconditioning techniques for multiphysics problems. FEMPAR is a framework that provides users with out-of-the-box state-of-the-art discretization techniques and highly scalable solvers for the simulation of complex applications, hiding the dramatic complexity of the underlying algorithms. But it is also a framework for researchers that want to experience with new algorithms and solvers, by providing a highly extensible framework. In this work, the first one in a series of articles about FEMPAR, we provide a detailed introduction to the software abstractions used in the discretization module and the related geometrical module. We also provide some ingredients about the assembly of linear systems arising from finite element discretizations, but the software design of complex scalable multilevel solvers is postponed to a subsequent work.
- Open Access
FEMPAR: An object-oriented parallel finite element framework
FEMPAR is an open source object oriented Fortran200X scientific software library for the high-performance scalable simulation of complex multiphysics problems governed by partial differential equations at large scales, by exploiting state-of-the-art supercomputing resources. It is a highly modularized, flexible, and extensible library, that provides a set of modules that can be combined to carry out the different steps of the simulation pipeline. FEMPAR includes a rich set of algorithms for the discretization step, namely (arbitrary-order) grad, div, and curl-conforming finite element methods, discontinuous Galerkin methods, B-splines, and unfitted finite element techniques on cut cells, combined with $h$-adaptivity. The linear solver module relies on state-of-the-art bulk-asynchronous implementations of multilevel domain decomposition solvers for the different discretization alternatives and block-preconditioning techniques for multiphysics problems. FEMPAR is a framework that provides users with out-of-the-box state-of-the-art discretization techniques and highly scalable solvers for the simulation of complex applications, hiding the dramatic complexity of the underlying algorithms. But it is also a framework for researchers that want to experience with new algorithms and solvers, by providing a highly extensible framework. In this work, the first one in a series of articles about FEMPAR, we provide a detailed introduction to the software abstractions used in the discretization module and the related geometrical module. We also provide some ingredients about the assembly of linear systems arising from finite element discretizations, but the software design of complex scalable multilevel solvers is postponed to a subsequent work.
Open AccessFEMPAR: An object-oriented parallel finite element framework
FEMPAR is an open source object oriented Fortran200X scientific software library for the high-performance scalable simulation of complex multiphysics problems governed by partial differential equations at large scales, by exploiting state-of-the-art supercomputing resources. It is a highly modularized, flexible, and extensible library, that provides a set of modules that can be combined to carry out the different steps of the simulation pipeline. FEMPAR includes a rich set of algorithms for the discretization step, namely (arbitrary-order) grad, div, and curl-conforming finite element methods, discontinuous Galerkin methods, B-splines, and unfitted finite element techniques on cut cells, combined with $h$-adaptivity. The linear solver module relies on state-of-the-art bulk-asynchronous implementations of multilevel domain decomposition solvers for the different discretization alternatives and block-preconditioning techniques for multiphysics problems. FEMPAR is a framework that provides users with out-of-the-box state-of-the-art discretization techniques and highly scalable solvers for the simulation of complex applications, hiding the dramatic complexity of the underlying algorithms. But it is also a framework for researchers that want to experience with new algorithms and solvers, by providing a highly extensible framework. In this work, the first one in a series of articles about FEMPAR, we provide a detailed introduction to the software abstractions used in the discretization module and the related geometrical module. We also provide some ingredients about the assembly of linear systems arising from finite element discretizations, but the software design of complex scalable multilevel solvers is postponed to a subsequent work.