Junoh Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Junoh Kim has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Cheoljoong Kim
School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea
3 shared publications Dooseub Shin
School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 34141, South Korea
3 shared publicationsGyohyun Koo
School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 34141, South Korea
3 shared publications- Junsik Lee
School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea
3 shared publications Yong Hyub Won
School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea
3 shared publicationsJee Hoon Sim
School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 34141, South Korea
2 shared publications
Latest Publications
- 13 May 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (10) , 2554-2557
Method to reduce the aberration of a polygonal aperture focus-tunable lens array for high fill factor
Focus-tunable liquid lens arrays have been used to improve depth in glass-free three-dimensional devices where high fill factor is required. For high fill factors, polygonal apertures should be used, but due to the difficulty of controlling aberrations during focus tuning, polygonal aperture focus-tunable lenses have rarely been studied. This Letter proposes a new structure with walls at the lens boundaries using a square parabolic lens model to control the quadrafoil aberration induced by the square aperture. ANSYS simulation confirmed that the lens surface was closest to the parabolic lens model when the wall thickness was 1.4 mm. A fabricated lens array demonstrated the quadrafoil inhibitory effect and confirmed the utility of the new structure.
- 13 May 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (10) , 2554-2557
Method to reduce the aberration of a polygonal aperture focus-tunable lens array for high fill factor
Focus-tunable liquid lens arrays have been used to improve depth in glass-free three-dimensional devices where high fill factor is required. For high fill factors, polygonal apertures should be used, but due to the difficulty of controlling aberrations during focus tuning, polygonal aperture focus-tunable lenses have rarely been studied. This Letter proposes a new structure with walls at the lens boundaries using a square parabolic lens model to control the quadrafoil aberration induced by the square aperture. ANSYS simulation confirmed that the lens surface was closest to the parabolic lens model when the wall thickness was 1.4 mm. A fabricated lens array demonstrated the quadrafoil inhibitory effect and confirmed the utility of the new structure.
- Open Access
- 23 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 10 (4) , 1-12
3-D image Crosstalk Reduction by Controlling the Width of the Electrode in a Liquid Lenticular Lens
In this paper, a liquid lenticular lens with correct focal length was designed by controlling the width of the electrode and analyzing the microfluidic phenomena at boundary between oil and salted water in the liquid lenticular lens. A liquid lenticular lens that has inaccurate focal length results in serious crosstalk and three-dimensional (3-D) image distortion. Therefore, to reduce the crosstalk, the liquid lenticular lens should be fabricated in such a way that the image plane of the LCD is at the focal plane of the lens. To do so, the width of the electrode was adjusted and saturation angle between two liquids and the sidewall of the chamber was measured. The optimum width of the electrode was derived by applying the saturation angle and a final sample having a short focal length was fabricated. When the width of the electrode was optimized, the crosstalk was measured at 21.95% and the value was 10% less than when not being optimized. Also, the viewing angle was increased up to 45°. As a result, this crosstalk reduction led to 3-D image enhancement.
- 23 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 10 (4) , 1-12
Open Access3-D image Crosstalk Reduction by Controlling the Width of the Electrode in a Liquid Lenticular Lens
In this paper, a liquid lenticular lens with correct focal length was designed by controlling the width of the electrode and analyzing the microfluidic phenomena at boundary between oil and salted water in the liquid lenticular lens. A liquid lenticular lens that has inaccurate focal length results in serious crosstalk and three-dimensional (3-D) image distortion. Therefore, to reduce the crosstalk, the liquid lenticular lens should be fabricated in such a way that the image plane of the LCD is at the focal plane of the lens. To do so, the width of the electrode was adjusted and saturation angle between two liquids and the sidewall of the chamber was measured. The optimum width of the electrode was derived by applying the saturation angle and a final sample having a short focal length was fabricated. When the width of the electrode was optimized, the crosstalk was measured at 21.95% and the value was 10% less than when not being optimized. Also, the viewing angle was increased up to 45°. As a result, this crosstalk reduction led to 3-D image enhancement.
- Open Access
- 19 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (15) , 19614-19626
Electro-wetting lenticular lens with improved diopter for 2D and 3D conversion using lens-shaped ETPTA chamber
In this paper, we introduce a method for improving the lens diopter of 2D/3D convertible devices using electro-wetting. For stable operation, an electro-wetting device requires high dioptric performance and this was achieved using bi-convex liquid-liquid-solid phases. 1-Chloronaphthalene with a refractive index of 1.633 was used as an oil phase to achieve high diopters. ETPTA (trimethylolpropane ethoxylate triacrylate), a UV-sensitive material with low chemical reactivity to the 1-Chloronaphthalene, was used as a chamber material. This resulted in a diopter of 3030D for high quality multi-view images without unstable oil movement or trembling. The ETPTA was molded on a 0.3mm thick glass substrate that was coated with UV adhesive (NOA 81). The maximum diopter capable of stable operation was 3425D. 2D and 3D conversion and parallax motion were demonstrated.
- 19 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (15) , 19614-19626
Open AccessElectro-wetting lenticular lens with improved diopter for 2D and 3D conversion using lens-shaped ETPTA chamber
In this paper, we introduce a method for improving the lens diopter of 2D/3D convertible devices using electro-wetting. For stable operation, an electro-wetting device requires high dioptric performance and this was achieved using bi-convex liquid-liquid-solid phases. 1-Chloronaphthalene with a refractive index of 1.633 was used as an oil phase to achieve high diopters. ETPTA (trimethylolpropane ethoxylate triacrylate), a UV-sensitive material with low chemical reactivity to the 1-Chloronaphthalene, was used as a chamber material. This resulted in a diopter of 3030D for high quality multi-view images without unstable oil movement or trembling. The ETPTA was molded on a 0.3mm thick glass substrate that was coated with UV adhesive (NOA 81). The maximum diopter capable of stable operation was 3425D. 2D and 3D conversion and parallax motion were demonstrated.
- 30 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 29 (18) , 1540-1543
Optimization of a Liquid Lenticular System for 2D and 3D Conversion
This letter deals with a 2D and 3D convertible device implemented using a liquid lens. The electro-wetting on dielectric (EWOD) phenomenon was used to operate the liquid lens. The research aimed to display 3D images clearly by achieving the highest dioptric power. The 2D state and the 3D state were switched by a meniscus of two immiscible liquids, and concave to convex lens states were formed by the meniscus. In a previous iteration, during EWOD operation, the oil phase moved in unexpected directions. This movement degraded the total quality of the lenticular system when displaying the 3D state. Here, a method is suggested to avoid the phenomenon by controlling the area of the electrode. Since the dioptric power of the lens is determined by the contact angle of the oil and the water, the electrode location, which determines the volume of the oil phase, was investigated to obtain the maximum dioptric power range. The two liquids were dosed into transparent chambers where the dielectric layer and the electrode were deposited. Finally, the highest diopter was achieved, which showed improved 3D image quality.
- 30 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 29 (18) , 1540-1543
Optimization of a Liquid Lenticular System for 2D and 3D Conversion
This letter deals with a 2D and 3D convertible device implemented using a liquid lens. The electro-wetting on dielectric (EWOD) phenomenon was used to operate the liquid lens. The research aimed to display 3D images clearly by achieving the highest dioptric power. The 2D state and the 3D state were switched by a meniscus of two immiscible liquids, and concave to convex lens states were formed by the meniscus. In a previous iteration, during EWOD operation, the oil phase moved in unexpected directions. This movement degraded the total quality of the lenticular system when displaying the 3D state. Here, a method is suggested to avoid the phenomenon by controlling the area of the electrode. Since the dioptric power of the lens is determined by the contact angle of the oil and the water, the electrode location, which determines the volume of the oil phase, was investigated to obtain the maximum dioptric power range. The two liquids were dosed into transparent chambers where the dielectric layer and the electrode were deposited. Finally, the highest diopter was achieved, which showed improved 3D image quality.
- Open Access
- 19 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 9 (3) , 1-8
Analysis and Reduction of Crosstalk in the Liquid Lenticular Lens Array
In this paper, we analyze the crosstalk of the liquid lenticular lens array and reduce the crosstalk by blocking light leakages from the top and wall parts of the chamber. A variety of factors affecting the crosstalk of the liquid lenticular lens array are proposed. The ratio of the unnecessary light from the top and wall parts of the chamber are theoretically calculated and compared with the measured values. By using laminating foil and increasing the thickness of the electrode layer compared to the conventional sample, the light leakages from the top and wall parts of the chamber are blocked, and thus, the crosstalk is reduced to 21.23%, which is similar to that of the solid lenticular lens array. Image tests were conducted to demonstrate that crosstalk is reduced using a new sample.
- 19 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 9 (3) , 1-8
Open AccessAnalysis and Reduction of Crosstalk in the Liquid Lenticular Lens Array
In this paper, we analyze the crosstalk of the liquid lenticular lens array and reduce the crosstalk by blocking light leakages from the top and wall parts of the chamber. A variety of factors affecting the crosstalk of the liquid lenticular lens array are proposed. The ratio of the unnecessary light from the top and wall parts of the chamber are theoretically calculated and compared with the measured values. By using laminating foil and increasing the thickness of the electrode layer compared to the conventional sample, the light leakages from the top and wall parts of the chamber are blocked, and thus, the crosstalk is reduced to 21.23%, which is similar to that of the solid lenticular lens array. Image tests were conducted to demonstrate that crosstalk is reduced using a new sample.