Michel E. AlSharidah
Research Subjects
Michel E. AlSharidah has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Nabil A. Ahmed
2 shared publicationsA. K. Al-Othman
College of Technological Studies
1 shared publication- A. K. Al-Othman
Electrical Engineering Department, College of Technological Studies, Alwarda, P.O. Box 33198 73452 Kuwait
1 shared publication A.K. Al-Othman
1 shared publicationAbdulrahman K. Al-Othman
Electrical Engineering Department, College of Technological Studies, Shuwaikh, Kuwait
1 shared publicationAbdulrahman K. Alothman
1 shared publication
Latest Publications
- 21 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 18 (7) , 4608-4621
Optimization Model for EV Charging Stations With PV Farm Transactive Energy
This article proposes a new mathematical formulation for optimal operation scheduling for a remote photovoltaic (PV) farm and distributed electric vehicle charging stations (D-EVCSs), which are owned by a private entity. The proposed model is formulated to maximize the profit of the D-EVCSs private investor through optimal electric vehicle (EV) charging coordination and pricing mechanism. The proposed pricing mechanism aims to achieve an expected revenue by the private investor, while guaranteeing a low charging price for EVs to ensure the EV owners’ satisfaction. For the EV supply application, D-EVCS integrates a battery storage system and rooftop PV. However, the rooftop PV installation is constrained to the limited footprint of the EVCS. For this reason, the investment in a remote PV farm and its impact on the expected revenue and the EVs charging price is introduced in this article. The power generated by the remote PV farm can be transacted to the D-EVCSs using a power purchase agreement through the utility grid infrastructure. In such a transaction, the electricity service and distribution fees are paid to the utility grid for overseeing the PV farm power transaction. The proposed model also considers the opportunity for D-EVCSs to participate in the provision of operating reserve and demand response ancillary services. Different case studies are evaluated for the purpose of validating the effectiveness of the proposed model.
- 21 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 18 (7) , 4608-4621
Optimization Model for EV Charging Stations With PV Farm Transactive Energy
This article proposes a new mathematical formulation for optimal operation scheduling for a remote photovoltaic (PV) farm and distributed electric vehicle charging stations (D-EVCSs), which are owned by a private entity. The proposed model is formulated to maximize the profit of the D-EVCSs private investor through optimal electric vehicle (EV) charging coordination and pricing mechanism. The proposed pricing mechanism aims to achieve an expected revenue by the private investor, while guaranteeing a low charging price for EVs to ensure the EV owners’ satisfaction. For the EV supply application, D-EVCS integrates a battery storage system and rooftop PV. However, the rooftop PV installation is constrained to the limited footprint of the EVCS. For this reason, the investment in a remote PV farm and its impact on the expected revenue and the EVs charging price is introduced in this article. The power generated by the remote PV farm can be transacted to the D-EVCSs using a power purchase agreement through the utility grid infrastructure. In such a transaction, the electricity service and distribution fees are paid to the utility grid for overseeing the PV farm power transaction. The proposed model also considers the opportunity for D-EVCSs to participate in the provision of operating reserve and demand response ancillary services. Different case studies are evaluated for the purpose of validating the effectiveness of the proposed model.
- 21 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2025-2035
BLDC Motor Drives: A Single Hall Sensor Method and a 160° Commutation Strategy
The application of Hall-based BLDC motors ranges from automotive accessory components such as oil and water pumps to high speed compressors. This paper proposes a new twelve-step unsymmetrical 160o commutation strategy using a single Hall-effect sensor method for brushless DC (BLDC) motor drives. The signal from the Hall-effect sensor is used to generate a number of pseudo Hall signals via a proposed speed-position estimator. The pseudo signals are then employed to control switching logic of a voltage source inverter (VSI). The effectiveness of the single Hall sensor method is examined on the unconventional 160o strategy, and on conventional 120o, 150o and 180o strategies with promising results. The paper presents a detailed comparison of the twelve-step unsymmetrical 160o commutation strategy with six-step voltage space vector that is used in conventional 120o and 180o strategies, and twelve-step symmetrical voltage space vector that is used in 150o strategy. Simulation results are validated via experimental measurements on a laboratory set-up using a real time dSPACE control environment, a representative BLDC motor prototype, a VSI and associated control components.
- 21 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2025-2035
BLDC Motor Drives: A Single Hall Sensor Method and a 160° Commutation Strategy
The application of Hall-based BLDC motors ranges from automotive accessory components such as oil and water pumps to high speed compressors. This paper proposes a new twelve-step unsymmetrical 160o commutation strategy using a single Hall-effect sensor method for brushless DC (BLDC) motor drives. The signal from the Hall-effect sensor is used to generate a number of pseudo Hall signals via a proposed speed-position estimator. The pseudo signals are then employed to control switching logic of a voltage source inverter (VSI). The effectiveness of the single Hall sensor method is examined on the unconventional 160o strategy, and on conventional 120o, 150o and 180o strategies with promising results. The paper presents a detailed comparison of the twelve-step unsymmetrical 160o commutation strategy with six-step voltage space vector that is used in conventional 120o and 180o strategies, and twelve-step symmetrical voltage space vector that is used in 150o strategy. Simulation results are validated via experimental measurements on a laboratory set-up using a real time dSPACE control environment, a representative BLDC motor prototype, a VSI and associated control components.
- 3 December 2015
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 44 (2) , 233-239
On-line Estimation of Transmission Line Parameters Using Synchronized Measurements
A new on-line method for estimating transmission line constants of a power system is proposed in this article. The method applies a digital dynamic filter technique to perform the estimation based on minimization of residual least absolute value. The proposed technique can be used on-line to account for any dynamics changes in line constants. Synchronized phasor measurements are used to feed the dynamic filter. The synchronized samples of voltage and current waveforms, at both the receiving and sending end terminals, are used to set an over-determined system of equations. The problem is formulated as an estimation problem. Different practical case studies are presented. Eventually, the proposed discrete dynamic filtering algorithm estimates the ABCD constants and, consequently, the line parameters of both short and long lines. Effects of different factors, such as noise and unsynchronized samples, are studied. Results obtained show the reliability and accuracy of the method in estimating the transmission line parameters.
- 3 December 2015
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 44 (2) , 233-239
On-line Estimation of Transmission Line Parameters Using Synchronized Measurements
A new on-line method for estimating transmission line constants of a power system is proposed in this article. The method applies a digital dynamic filter technique to perform the estimation based on minimization of residual least absolute value. The proposed technique can be used on-line to account for any dynamics changes in line constants. Synchronized phasor measurements are used to feed the dynamic filter. The synchronized samples of voltage and current waveforms, at both the receiving and sending end terminals, are used to set an over-determined system of equations. The problem is formulated as an estimation problem. Different practical case studies are presented. Eventually, the proposed discrete dynamic filtering algorithm estimates the ABCD constants and, consequently, the line parameters of both short and long lines. Effects of different factors, such as noise and unsynchronized samples, are studied. Results obtained show the reliability and accuracy of the method in estimating the transmission line parameters.
- 1 September 2015
- Published by Taylor & Francis in EPE Journal
- Vol. 25 (3) , 11-20
Multilevel Inverters Harmonic Elimination with Non-Equal DC Voltage Sources Using Linear Fuzzy Programming
This paper presents a fast and effective optimal solution of harmonic elimination of multilevel inverters with unbalanced DC sources using fuzzy linear programming (FLP). A set of non-linear mathematical models containing a description of the general output waveform of cascaded H-bridge multilevel inverters with unbalanced DC sources, will be formulated. An objective function will be employed to obtain an optimal solution for a set of switching instances to eliminate undesired harmonics. The solution algorithm will also control the output voltage level at the desired fundamental component. FLP is used to obtain an accurate and fast solution to minimize the linearized objective function and identify the desired set of switching angles. The proposed fuzzy linear programming is tested both in simulation and experimentally, for different cases of multilevel inverters to verify the accuracy of the results.
- 1 September 2015
- Published by Taylor & Francis in EPE Journal
- Vol. 25 (3) , 11-20
Multilevel Inverters Harmonic Elimination with Non-Equal DC Voltage Sources Using Linear Fuzzy Programming
This paper presents a fast and effective optimal solution of harmonic elimination of multilevel inverters with unbalanced DC sources using fuzzy linear programming (FLP). A set of non-linear mathematical models containing a description of the general output waveform of cascaded H-bridge multilevel inverters with unbalanced DC sources, will be formulated. An objective function will be employed to obtain an optimal solution for a set of switching instances to eliminate undesired harmonics. The solution algorithm will also control the output voltage level at the desired fundamental component. FLP is used to obtain an accurate and fast solution to minimize the linearized objective function and identify the desired set of switching angles. The proposed fuzzy linear programming is tested both in simulation and experimentally, for different cases of multilevel inverters to verify the accuracy of the results.
- 11 June 2015
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 40 (9) , 2619-2628
Parameter Identification of PEM Fuel Cell Using Quantum-Based Optimization Method
- 11 June 2015
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 40 (9) , 2619-2628
Parameter Identification of PEM Fuel Cell Using Quantum-Based Optimization Method
- 1 November 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 267-274
Negative Sequence Injection for Islanding Detection of GRID Interconnected Distributed Generators
This paper introduces a novel method of is-landing detection for distributed generation networks employing negative sequence current injection measurement. The negative sequence current injection method (NSCI) is an improvement on previous impedance measurement and current injection techniques for islanding detection. The negative sequence current injection is generated in the synchronous space vector of the inverter reference current. Simulations were conducted on a distributed generator fed loads and injected negative sequence current components using PSIM software to conrm the eectiveness of the proposed method. Detailed simulations were run to demonstrate the performance of the NSCI islanding detection technique at inverters terminals.
- 1 November 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 267-274
Negative Sequence Injection for Islanding Detection of GRID Interconnected Distributed Generators
This paper introduces a novel method of is-landing detection for distributed generation networks employing negative sequence current injection measurement. The negative sequence current injection method (NSCI) is an improvement on previous impedance measurement and current injection techniques for islanding detection. The negative sequence current injection is generated in the synchronous space vector of the inverter reference current. Simulations were conducted on a distributed generator fed loads and injected negative sequence current components using PSIM software to conrm the eectiveness of the proposed method. Detailed simulations were run to demonstrate the performance of the NSCI islanding detection technique at inverters terminals.
- 1 January 2013
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 44 (1) , 123-133
A hybrid real coded genetic algorithm – Pattern search approach for selective harmonic elimination of PWM AC/AC voltage controller
- 1 January 2013
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 44 (1) , 123-133
A hybrid real coded genetic algorithm – Pattern search approach for selective harmonic elimination of PWM AC/AC voltage controller
- 1 October 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02750473,p. 1-6
A new representation of the unintentional islanding test resonant function
A new method for the unintentional islanding test of grid-connected inverters is proposed. The current testing standard uses discrete RLC elements to simulate the test island. Even though the RLC simulated test island is useful for its reproducibility, relative scalability and setup time, as inverter power ratings increase so does the size, cost and setup time of the RLC simulated island. The proposed four quadrant current controlled current source can represent the function of the resonant part of the test island. It as well provide compensation for dynamic changes during the test and producing near worst case conditions for islanding. In this paper, proposed improvements to the unintentional islanding test are presented through replacing the resonant LC elements with an island stabilizing element (ISE).
- 1 October 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02750473,p. 1-6
A new representation of the unintentional islanding test resonant function
A new method for the unintentional islanding test of grid-connected inverters is proposed. The current testing standard uses discrete RLC elements to simulate the test island. Even though the RLC simulated test island is useful for its reproducibility, relative scalability and setup time, as inverter power ratings increase so does the size, cost and setup time of the RLC simulated island. The proposed four quadrant current controlled current source can represent the function of the resonant part of the test island. It as well provide compensation for dynamic changes during the test and producing near worst case conditions for islanding. In this paper, proposed improvements to the unintentional islanding test are presented through replacing the resonant LC elements with an island stabilizing element (ISE).