Hiroshi Amekura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hiroshi Amekura has a total of 162 co-authors. Here are the top co-authors by number of shared publications:
N. Ishikawa
Japan Atomic Energy Agency (JAEA), Tokai, Japan
10 shared publicationsN. Kishimoto
10 shared publicationsN. Okubo
Japan Atomic Energy Agency (JAEA), Tokai, Japan
10 shared publicationsY. Takeda
National Institute for Materials Science (NIMS), Tsukuba, Ibaraki 305-0003, Japan
9 shared publicationsCh. Buchal
Australian National University
6 shared publications- Feng Chen
School of Physics, State Key Laboratory of Crystal Materials, Shandong University, Jinan, China
6 shared publications
Latest Publications
- Open Access
- 7 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Enhancing hydrogen permeation barrier performance of ErCo2 magnetic refrigeration material via surface oxide layer formation
The ErCo 2 intermetallic compound exhibits a significant magnetocaloric effect at approximately 32 K and has potential applications as a magnetic refrigeration material for hydrogen liquefaction. However, exposure to a hydrogen atmosphere may lead to hydride formation, which weakens the magnetocaloric effect. Thus, preventing hydrogen permeation into ErCo 2 is crucial. Herein, we enhance the hydrogen permeation barrier (HPB) performance of ErCo 2 particles by using electroless Cu plating followed by oxidation treatment to form a CuO layer with a thickness of a few micrometers. In experiments, ErCo 2 particles, with a 1.5- to 5-µm-thick CuO surface layer, exhibited a large magnetic entropy change of 24 J kg⁻¹ K⁻¹ even after exposure to a H 2 atmosphere at 1.27 MPa and 296 K for 7 d. Experimental analyses and first-principles calculations revealed the potential of CuO as an HPB material for magnetic refrigeration.
- 7 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessEnhancing hydrogen permeation barrier performance of ErCo2 magnetic refrigeration material via surface oxide layer formation
The ErCo 2 intermetallic compound exhibits a significant magnetocaloric effect at approximately 32 K and has potential applications as a magnetic refrigeration material for hydrogen liquefaction. However, exposure to a hydrogen atmosphere may lead to hydride formation, which weakens the magnetocaloric effect. Thus, preventing hydrogen permeation into ErCo 2 is crucial. Herein, we enhance the hydrogen permeation barrier (HPB) performance of ErCo 2 particles by using electroless Cu plating followed by oxidation treatment to form a CuO layer with a thickness of a few micrometers. In experiments, ErCo 2 particles, with a 1.5- to 5-µm-thick CuO surface layer, exhibited a large magnetic entropy change of 24 J kg⁻¹ K⁻¹ even after exposure to a H 2 atmosphere at 1.27 MPa and 296 K for 7 d. Experimental analyses and first-principles calculations revealed the potential of CuO as an HPB material for magnetic refrigeration.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Tailored silver nanoparticle arrays for enhanced polarization-anisotropic second-harmonic emission
Nonlinear optical phenomena with polarization-dependent characteristics are pivotal for the advancement of integrated photonic devices. We present the remarkable second-harmonic generation (SHG) with pronounced polarization anisotropy, achieved through meticulously engineered silver (Ag) nanoparticle (NP) arrays. The spherical Ag NP arrays are initially fabricated beneath the surface of SiO2 substrates via 160 keV Ag+ ion implantation. Following this, the swift heavy-ion irradiation (SHII) at an energy of 200 MeV is applied to irradiate the embedded spherical Ag NPs in SiO2 at a 45° angle relative to the surface normal. Under SHII, the Ag NPs are elongated along the Xe14+ ion trajectory and form rod-like structures with a uniform orientation across centimeter-scale areas, leading to varied interparticle distances along the x- and y-directions. As a consequence, the engineered Ag NP arrays exhibit polarization-sensitive plasmonic optical responses across both the visible and near-infrared spectra, demonstrating a distinct dipole-like, polarization-dependent SHG response with an impressive anisotropy ratio of up to 25 (SHG intensity maxima under x-polarized laser excitations and minima under y-polarized laser excitations). Notably, the SHG intensity from the tailored Ag NP arrays is comparable to that of two-dimensional transition metal dichalcogenides. The unique polarization-dependent nonlinearity offered by these extensive Ag NP arrays presents significant potential for integrated nonlinear photonic applications that harness polarization functionality.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Tailored silver nanoparticle arrays for enhanced polarization-anisotropic second-harmonic emission
Nonlinear optical phenomena with polarization-dependent characteristics are pivotal for the advancement of integrated photonic devices. We present the remarkable second-harmonic generation (SHG) with pronounced polarization anisotropy, achieved through meticulously engineered silver (Ag) nanoparticle (NP) arrays. The spherical Ag NP arrays are initially fabricated beneath the surface of SiO2 substrates via 160 keV Ag+ ion implantation. Following this, the swift heavy-ion irradiation (SHII) at an energy of 200 MeV is applied to irradiate the embedded spherical Ag NPs in SiO2 at a 45° angle relative to the surface normal. Under SHII, the Ag NPs are elongated along the Xe14+ ion trajectory and form rod-like structures with a uniform orientation across centimeter-scale areas, leading to varied interparticle distances along the x- and y-directions. As a consequence, the engineered Ag NP arrays exhibit polarization-sensitive plasmonic optical responses across both the visible and near-infrared spectra, demonstrating a distinct dipole-like, polarization-dependent SHG response with an impressive anisotropy ratio of up to 25 (SHG intensity maxima under x-polarized laser excitations and minima under y-polarized laser excitations). Notably, the SHG intensity from the tailored Ag NP arrays is comparable to that of two-dimensional transition metal dichalcogenides. The unique polarization-dependent nonlinearity offered by these extensive Ag NP arrays presents significant potential for integrated nonlinear photonic applications that harness polarization functionality.
- Open Access
- 7 November 2024
- Published by MDPI AG in Quantum Beam Science
- Vol. 8 (4) , 29
Metallic Ca Aggregates Formed Along Ion Tracks and Optical Anisotropy in CaF2 Crystals Irradiated with Swift Heavy Ions
It is known that swift heavy ion (SHI) irradiation induces the shape elongation of metal nanoparticles (NPs) embedded in transparent insulators, which results in anisotropic optical absorption. Here, we report another type of the optical anisotropy induced in CaF2 crystals without including intentionally embedded metal NPs. The CaF2 samples were irradiated with 200 MeV Xe14+ ions with an incident angle of 45° from the surface normal. With the increasing fluence, an absorption band at ~550 nm, which is ascribed to Ca aggregates, increases both the intensity and the anisotropy. XTEM observation clarified the formation of the continuous line structures and the discontinuous NP chains parallel to the SHI beam. Numerical simulations of the optical absorption spectra suggested the NP chains but not the continuous line structures as the origin of the anisotropy. The optical anisotropy in CaF2 irradiated with SHIs is different from the shape elongation of NPs.
- 7 November 2024
- Published by MDPI AG in Quantum Beam Science
- Vol. 8 (4) , 29
Open AccessMetallic Ca Aggregates Formed Along Ion Tracks and Optical Anisotropy in CaF2 Crystals Irradiated with Swift Heavy Ions
It is known that swift heavy ion (SHI) irradiation induces the shape elongation of metal nanoparticles (NPs) embedded in transparent insulators, which results in anisotropic optical absorption. Here, we report another type of the optical anisotropy induced in CaF2 crystals without including intentionally embedded metal NPs. The CaF2 samples were irradiated with 200 MeV Xe14+ ions with an incident angle of 45° from the surface normal. With the increasing fluence, an absorption band at ~550 nm, which is ascribed to Ca aggregates, increases both the intensity and the anisotropy. XTEM observation clarified the formation of the continuous line structures and the discontinuous NP chains parallel to the SHI beam. Numerical simulations of the optical absorption spectra suggested the NP chains but not the continuous line structures as the origin of the anisotropy. The optical anisotropy in CaF2 irradiated with SHIs is different from the shape elongation of NPs.
- Open Access
- 27 February 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Latent ion tracks were finally observed in diamond
Injecting high-energy heavy ions in the electronic stopping regime into solids can create cylindrical damage zones called latent ion tracks. Although these tracks form in many materials, none have ever been observed in diamond, even when irradiated with high-energy GeV uranium ions. Here we report the first observation of ion track formation in diamond irradiated with 2–9 MeV C60 fullerene ions. Depending on the ion energy, the mean track length (diameter) changed from 17 (3.2) nm to 52 (7.1) nm. High resolution scanning transmission electron microscopy (HR-STEM) indicated the amorphization in the tracks, in which π-bonding signal from graphite was detected by the electron energy loss spectroscopy (EELS). Since the melting transition is not induced in diamond at atmospheric pressure, conventional inelastic thermal spike calculations cannot be applied. Two-temperature molecular dynamics simulations succeeded in the reproduction of both the track formation under MeV C60 irradiations and the no-track formation under GeV monoatomic ion irradiations.
- 27 February 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Open AccessLatent ion tracks were finally observed in diamond
Injecting high-energy heavy ions in the electronic stopping regime into solids can create cylindrical damage zones called latent ion tracks. Although these tracks form in many materials, none have ever been observed in diamond, even when irradiated with high-energy GeV uranium ions. Here we report the first observation of ion track formation in diamond irradiated with 2–9 MeV C60 fullerene ions. Depending on the ion energy, the mean track length (diameter) changed from 17 (3.2) nm to 52 (7.1) nm. High resolution scanning transmission electron microscopy (HR-STEM) indicated the amorphization in the tracks, in which π-bonding signal from graphite was detected by the electron energy loss spectroscopy (EELS). Since the melting transition is not induced in diamond at atmospheric pressure, conventional inelastic thermal spike calculations cannot be applied. Two-temperature molecular dynamics simulations succeeded in the reproduction of both the track formation under MeV C60 irradiations and the no-track formation under GeV monoatomic ion irradiations.
- Open Access
- 22 May 2023
- Published by Elsevier in Applied Surface Science
- Vol. 631
Fine-tuning of plasmonics by Au@AuY/Au core–shell nanoparticle monolayer for enhancement of third-order nonlinearity
- 22 May 2023
- Published by Elsevier in Applied Surface Science
- Vol. 631
Open AccessFine-tuning of plasmonics by Au@AuY/Au core–shell nanoparticle monolayer for enhancement of third-order nonlinearity
- Open Access
- 7 April 2023
- Published by MDPI AG in Quantum Beam Science
- Vol. 7 (2) , 12
Irradiation Temperature Dependence of Shape Elongation of Metal Nanoparticles in Silica: Counterevidence to Ion Hammering Related Scenario
Irradiation temperature (IT) dependence of the elongation efficiency of vanadium nanoparticles (NPs) in SiO2 was evaluated: The samples were irradiated with 120 MeV Ag9+ ions to a fluence of 1.0 × 1014 ions/cm2 each at ITs of 300, 433, 515, and 591 K, while the measurements were performed at room temperature. The vanadium was selected for the NP species because of the highest bulk m.p. of 1910 °C (2183 K) among all the species of the elemental metal NPs in which the shape elongation was observed. The highest m.p. could contribute negligible size changes of NPs against inevitable exposure to high temperatures for the IT dependence measurements. The elongation of V NPs was evaluated qualitatively by transmission electron microscopy (TEM) and quantitatively by optical linear dichroism (OLD) spectroscopy. The electron microscopy studies showed a pronounced elongation of NPs with ion irradiation at the elevated temperatures. The OLD signal was almost constant, or even slightly increased with increasing the IT from 300 to 591 K. This IT dependence provides a striking contrast to that of the ion hammering (IH) effect, which predicts a steep decrease with increasing IT. Combined with the other two counterevidence previously reported, the IH-related effect is excluded from the origin of the shape elongation of metal NPs in SiO2.
- 7 April 2023
- Published by MDPI AG in Quantum Beam Science
- Vol. 7 (2) , 12
Open AccessIrradiation Temperature Dependence of Shape Elongation of Metal Nanoparticles in Silica: Counterevidence to Ion Hammering Related Scenario
Irradiation temperature (IT) dependence of the elongation efficiency of vanadium nanoparticles (NPs) in SiO2 was evaluated: The samples were irradiated with 120 MeV Ag9+ ions to a fluence of 1.0 × 1014 ions/cm2 each at ITs of 300, 433, 515, and 591 K, while the measurements were performed at room temperature. The vanadium was selected for the NP species because of the highest bulk m.p. of 1910 °C (2183 K) among all the species of the elemental metal NPs in which the shape elongation was observed. The highest m.p. could contribute negligible size changes of NPs against inevitable exposure to high temperatures for the IT dependence measurements. The elongation of V NPs was evaluated qualitatively by transmission electron microscopy (TEM) and quantitatively by optical linear dichroism (OLD) spectroscopy. The electron microscopy studies showed a pronounced elongation of NPs with ion irradiation at the elevated temperatures. The OLD signal was almost constant, or even slightly increased with increasing the IT from 300 to 591 K. This IT dependence provides a striking contrast to that of the ion hammering (IH) effect, which predicts a steep decrease with increasing IT. Combined with the other two counterevidence previously reported, the IH-related effect is excluded from the origin of the shape elongation of metal NPs in SiO2.
- Open Access
- 6 March 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (4) , 045701
Mechanism of ion track formation in silicon by much lower energy deposition than the formation threshold
Mechanism of the ion track formation in crystalline silicon (c-Si) is discussed, particularly under 1–9 MeV C60 ion irradiation. In this energy region, the track formation was not expected because the energy E was much lower than the threshold of E th = 17 MeV determined by extrapolation from higher energy data in the past literature. The track formation is different between irradiations of C60 ions and of monoatomic ions: The tracks were observed under 3 MeV C60 ion irradiation but not under 200 MeV Xe ions, while both the irradiations have the same electronic stopping (S e) of 14 keV nm−1 but much higher nuclear stopping (S n) for the former ions. The involvement of S n is suggested for the C60 ions. While the inelastic thermal spike (i-TS) calculations predict that the high energy monoatomic ion irradiation forms the tracks, the tracks have never been experimentally detected, suggesting quick annihilation of the tracks by highly enhanced recrystallization in c-Si. Exceptions are C60 ions of 1–9 MeV, where the track radii are well reproduced by the i-TS theory with assuming the melting transition. Collisional damage induced by the high S n from C60 ions obstructs the recrystallization in c-Si. Then the tracks formed by the melting transition survive against the recrystallization. This is a new type of the synergy effect between S e and S n, different from the already-known mechanisms, i.e., the pre-damage effect and the unified thermal spike. While c-Si was believed as a radiation-hard material in the S e regime with high S e threshold, this study suggests that c-Si has a low S e threshold but with efficient recrystallization.
- 6 March 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (4) , 045701
Open AccessMechanism of ion track formation in silicon by much lower energy deposition than the formation threshold
Mechanism of the ion track formation in crystalline silicon (c-Si) is discussed, particularly under 1–9 MeV C60 ion irradiation. In this energy region, the track formation was not expected because the energy E was much lower than the threshold of E th = 17 MeV determined by extrapolation from higher energy data in the past literature. The track formation is different between irradiations of C60 ions and of monoatomic ions: The tracks were observed under 3 MeV C60 ion irradiation but not under 200 MeV Xe ions, while both the irradiations have the same electronic stopping (S e) of 14 keV nm−1 but much higher nuclear stopping (S n) for the former ions. The involvement of S n is suggested for the C60 ions. While the inelastic thermal spike (i-TS) calculations predict that the high energy monoatomic ion irradiation forms the tracks, the tracks have never been experimentally detected, suggesting quick annihilation of the tracks by highly enhanced recrystallization in c-Si. Exceptions are C60 ions of 1–9 MeV, where the track radii are well reproduced by the i-TS theory with assuming the melting transition. Collisional damage induced by the high S n from C60 ions obstructs the recrystallization in c-Si. Then the tracks formed by the melting transition survive against the recrystallization. This is a new type of the synergy effect between S e and S n, different from the already-known mechanisms, i.e., the pre-damage effect and the unified thermal spike. While c-Si was believed as a radiation-hard material in the S e regime with high S e threshold, this study suggests that c-Si has a low S e threshold but with efficient recrystallization.
- 24 October 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (16) , 163902
Structure and magnetic properties of Fe nanoparticles in amorphous silica implanted with Fe ions and effect of subsequent energetic heavy ion irradiation
Amorphous silicon dioxide (hereafter SiO2) samples were implanted with 380 keV Fe ions at room temperature. After the implantation, some samples were irradiated with 16 MeV Au ions. The magnetic property was investigated by using a SQUID magnetometer, and the morphology of Fe-implanted SiO2 samples was examined by using a transmission electron microscope and x-ray absorption spectroscopy (extended x-ray absorption fine structure and x-ray absorption near edge structure). The size of Fe nanoparticles increases with an increase in the amount of Fe implantation. A part of Fe nanoparticles consists of Fe oxides, and with an increase in the amount of Fe implantation, the valence state of Fe atoms and the structure of Fe nanoparticles gets close to those of metallic α-Fe. The room temperature magnetism was observed in Fe-implanted SiO2 samples. The magnetization–magnetic field curves for samples implanted with a small amount of Fe are reproduced by the Langevin equation, implying that Fe nanoparticles present the superparamagnetic behavior. For a large amount of Fe implantation, the magnetization–magnetic field curve shows the ferromagnetic state. Such a result of magnetic property is consistent with the results of the x-ray absorption. By the subsequent 16 MeV Au irradiation, the Fe nanoparticles were fragmentated, resulting in the decrease in magnetization. The optical absorption property of the SiO2 samples is briefly discussed.
- 24 October 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (16) , 163902
Structure and magnetic properties of Fe nanoparticles in amorphous silica implanted with Fe ions and effect of subsequent energetic heavy ion irradiation
Amorphous silicon dioxide (hereafter SiO2) samples were implanted with 380 keV Fe ions at room temperature. After the implantation, some samples were irradiated with 16 MeV Au ions. The magnetic property was investigated by using a SQUID magnetometer, and the morphology of Fe-implanted SiO2 samples was examined by using a transmission electron microscope and x-ray absorption spectroscopy (extended x-ray absorption fine structure and x-ray absorption near edge structure). The size of Fe nanoparticles increases with an increase in the amount of Fe implantation. A part of Fe nanoparticles consists of Fe oxides, and with an increase in the amount of Fe implantation, the valence state of Fe atoms and the structure of Fe nanoparticles gets close to those of metallic α-Fe. The room temperature magnetism was observed in Fe-implanted SiO2 samples. The magnetization–magnetic field curves for samples implanted with a small amount of Fe are reproduced by the Langevin equation, implying that Fe nanoparticles present the superparamagnetic behavior. For a large amount of Fe implantation, the magnetization–magnetic field curve shows the ferromagnetic state. Such a result of magnetic property is consistent with the results of the x-ray absorption. By the subsequent 16 MeV Au irradiation, the Fe nanoparticles were fragmentated, resulting in the decrease in magnetization. The optical absorption property of the SiO2 samples is briefly discussed.
- Open Access
- 12 January 2022
- Published by MDPI AG in Quantum Beam Science
- Vol. 6 (1) , 4
Incident Angle Dependent Formation of Ion Tracks in Quartz Crystal with C60+ Ions: Big Ions in Small Channels
Quartz (SiO2) crystals possess intrinsic columnar pores perpendicular to (0001) surfaces, consisting of three- and six-membered ring (3MR and 6MR) structures of Si and O atoms. The diameters of the larger pores, i.e., 6 MRs, are ~0.49 nm, while the diameters of fullerene (C60) ions are 0.7 nm, i.e., larger than either type of the pores. Transmission electron microscopy observation evidenced approximately two times longer ion tracks in the channeling condition, i.e., 0° incidence to (0001) surface, than an off-channeling condition, i.e., 7° incidence in this case, under 6 MeV C60 ion injection. The track length at the 0° incidence decreases more steeply than that at the 7° incidence with decreasing the energy from 6 MeV to 1 MeV. Finally, the track lengths at the 0° and 7° incidences become comparable, i.e., the channeling-like effect disappears at 1 MeV irradiation. This study experimentally indicates that the channeling-like effect of C60 ions is induced in quartz crystals, while the sizes of the channels are smaller than the C60 ions.
- 12 January 2022
- Published by MDPI AG in Quantum Beam Science
- Vol. 6 (1) , 4
Open AccessIncident Angle Dependent Formation of Ion Tracks in Quartz Crystal with C60+ Ions: Big Ions in Small Channels
Quartz (SiO2) crystals possess intrinsic columnar pores perpendicular to (0001) surfaces, consisting of three- and six-membered ring (3MR and 6MR) structures of Si and O atoms. The diameters of the larger pores, i.e., 6 MRs, are ~0.49 nm, while the diameters of fullerene (C60) ions are 0.7 nm, i.e., larger than either type of the pores. Transmission electron microscopy observation evidenced approximately two times longer ion tracks in the channeling condition, i.e., 0° incidence to (0001) surface, than an off-channeling condition, i.e., 7° incidence in this case, under 6 MeV C60 ion injection. The track length at the 0° incidence decreases more steeply than that at the 7° incidence with decreasing the energy from 6 MeV to 1 MeV. Finally, the track lengths at the 0° and 7° incidences become comparable, i.e., the channeling-like effect disappears at 1 MeV irradiation. This study experimentally indicates that the channeling-like effect of C60 ions is induced in quartz crystals, while the sizes of the channels are smaller than the C60 ions.