Tiziana Vanorio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tiziana Vanorio has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Anthony C. Clark
Stanford Rock Physics Laboratory Stanford University Stanford CA USA
10 shared publications - Grazia De Landro
Department of Physics "Ettore Pancini", University of Naples Federico II, 80126 Naples, Italy
4 shared publications - Jihui Ding
Rock and Geomaterials Laboratory, Stanford University, Stanford, CA, United States
4 shared publications - Aldo Zollo
Department of Physics "Ettore Pancini", University of Naples Federico II, 80126 Naples, Italy
3 shared publications - Andrey V. Radostin
Institute of Applied Physics, Nizhny Novgorod, Russia
3 shared publications - Guido Russo
Università degli studi di Napoli Federico II - Dipartimento di Fisica "Ettore Pancini", 80126, Napoli, Italy
3 shared publications
Latest Publications
- Open Access
- 6 July 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (13)
Cyclic Thermal Shock‐Induced Permeability Enhancement in Tight Lithologies: Microstructural Controls and Elastic‐Wave Monitoring
Enhanced geothermal systems rely on increasing permeability and pore surface area in rock. Cyclic thermal shocking can achieve both by inducing thermal cracks through repeated rapid cooling. Laboratory experiments subjected micritic limestone, granodiorite, and trachybasalt to up to 10 thermal shock cycles, while tracking crack evolution qualitatively using time‐lapse electron microscopy and quantifying pressure‐dependent permeability and elastic wave velocities. This work advances prior efforts focused primarily on crack initiation by demonstrating how lithology‐specific microstructures govern the cyclic evolution, persistence, and efficiency of pressure‐dependent permeability enhancement during cyclic thermal shocking. This reframes microstructure as a key design variable controlling permeability enhancement and monitoring during geothermal stimulation. Contrasting mineral thermal properties, large mineral grains, and irregular vugs promote the greatest permeability enhancement. Velocity reductions were most pronounced P eff ) and diminished with increasing cycle number, indicating that velocity‐based monitoring in geothermal systems must account for P eff and cycle number.
- 6 July 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (13)
Open AccessCyclic Thermal Shock‐Induced Permeability Enhancement in Tight Lithologies: Microstructural Controls and Elastic‐Wave Monitoring
Enhanced geothermal systems rely on increasing permeability and pore surface area in rock. Cyclic thermal shocking can achieve both by inducing thermal cracks through repeated rapid cooling. Laboratory experiments subjected micritic limestone, granodiorite, and trachybasalt to up to 10 thermal shock cycles, while tracking crack evolution qualitatively using time‐lapse electron microscopy and quantifying pressure‐dependent permeability and elastic wave velocities. This work advances prior efforts focused primarily on crack initiation by demonstrating how lithology‐specific microstructures govern the cyclic evolution, persistence, and efficiency of pressure‐dependent permeability enhancement during cyclic thermal shocking. This reframes microstructure as a key design variable controlling permeability enhancement and monitoring during geothermal stimulation. Contrasting mineral thermal properties, large mineral grains, and irregular vugs promote the greatest permeability enhancement. Velocity reductions were most pronounced P eff ) and diminished with increasing cycle number, indicating that velocity‐based monitoring in geothermal systems must account for P eff and cycle number.
- Open Access
- 3 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1
Author Correction: 3D structure and dynamics of Campi Flegrei enhance multi-hazard assessment
- 3 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1
Open AccessAuthor Correction: 3D structure and dynamics of Campi Flegrei enhance multi-hazard assessment
- Open Access
- 23 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
3D structure and dynamics of Campi Flegrei enhance multi-hazard assessment
Campi Flegrei is an active caldera in a populated area, currently experiencing significant ground uplift and seismicity. Leveraging seismicity relocations, here we obtain high resolution, 3D P- and S-wave seismic images which we combine with a tailored rock physics experiment to define key features of the caldera’s structure: gas-rich reservoir below 2 km depth, deformed caprock at 1–2 km depth, and basement below 3.5 km depth. Seismicity migrates downwards from the caprock and changes in stress loading trigger deeper, higher events along the inner-caldera boundary faults. The reservoir closely correlates the area of maximum uplift, where deformation acceleration due to pore-fluid pressure is corroborated by laboratory experiments using site-relevant rock. The interaction between the pressurized gas-reservoir and the confining caprock drives the ground uplift. Our results indicate that seismic activity and the potential for a phreatic explosion should be considered as plausible scenarios, prompting a re-evaluation of the hazard assessment.
- 23 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Open Access3D structure and dynamics of Campi Flegrei enhance multi-hazard assessment
Campi Flegrei is an active caldera in a populated area, currently experiencing significant ground uplift and seismicity. Leveraging seismicity relocations, here we obtain high resolution, 3D P- and S-wave seismic images which we combine with a tailored rock physics experiment to define key features of the caldera’s structure: gas-rich reservoir below 2 km depth, deformed caprock at 1–2 km depth, and basement below 3.5 km depth. Seismicity migrates downwards from the caprock and changes in stress loading trigger deeper, higher events along the inner-caldera boundary faults. The reservoir closely correlates the area of maximum uplift, where deformation acceleration due to pore-fluid pressure is corroborated by laboratory experiments using site-relevant rock. The interaction between the pressurized gas-reservoir and the confining caprock drives the ground uplift. Our results indicate that seismic activity and the potential for a phreatic explosion should be considered as plausible scenarios, prompting a re-evaluation of the hazard assessment.
- Open Access
- 2 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (18) , eadt2067
The recurrence of geophysical manifestations at the Campi Flegrei caldera
The Campi Flegrei caldera (CFc), Italy, exhibits distinct unrest patterns, including shallow seismicity following substantial strain accumulation, all within a densely populated area. Previous geophysical studies typically analyzed individual episodes, but by comparing two distinct unrest periods we identified recurring manifestations and V P / V S anomalies linked to a confined reservoir at 2- to 4-kilometer depth. Integrating rock physics experiments under hydrothermal conditions, 24 years of rainfall data, and subsurface hydrodynamics, we found increasing rainfall rates, which indicate reservoir recharge and pressurization. We show that hydrothermal water promotes caprock sealing through the formation of a fibrous microstructure. Our experiments further demonstrate that fluid accumulation rates directly influence deformation rates. Together, these processes drive gradual deformation, natural seismicity, and deepening earthquake foci. Recognizing these recurring patterns is crucial for understanding the caldera’s unrest-driving mechanism, enabling us to offer actionable insights for hazard assessment and engineering solutions, such as intercepting water upstream to prevent drainage toward Pozzuoli.
- 2 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (18) , eadt2067
Open AccessThe recurrence of geophysical manifestations at the Campi Flegrei caldera
The Campi Flegrei caldera (CFc), Italy, exhibits distinct unrest patterns, including shallow seismicity following substantial strain accumulation, all within a densely populated area. Previous geophysical studies typically analyzed individual episodes, but by comparing two distinct unrest periods we identified recurring manifestations and V P / V S anomalies linked to a confined reservoir at 2- to 4-kilometer depth. Integrating rock physics experiments under hydrothermal conditions, 24 years of rainfall data, and subsurface hydrodynamics, we found increasing rainfall rates, which indicate reservoir recharge and pressurization. We show that hydrothermal water promotes caprock sealing through the formation of a fibrous microstructure. Our experiments further demonstrate that fluid accumulation rates directly influence deformation rates. Together, these processes drive gradual deformation, natural seismicity, and deepening earthquake foci. Recognizing these recurring patterns is crucial for understanding the caldera’s unrest-driving mechanism, enabling us to offer actionable insights for hazard assessment and engineering solutions, such as intercepting water upstream to prevent drainage toward Pozzuoli.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
3D Structure and Dynamics of Campi Flegrei Enhance Multi-Hazard Assessment
Campi Flegrei is an active caldera in a densely populated area, currently experiencing significant ground uplift and seismicity. Leveraging precise relocations of extensive seismicity since 2014, we determined high resolution (250 m), 3D P- and S-wave seismic images of the inner caldera which we combine with a novel rock-physics experiment to characterize the primary features of the caldera’s 3D structure: a gas-rich reservoir below 2 km depth, a deformed caprock at 1 to 2 km depth, and a funnel-shaped, (thermo-metamorphic) basement below 3.5 km depth. Seismicity migrates downwards from the caprock to the reservoir, and, following reservoir depletion, stress loading triggers deeper, larger magnitude events along the inner-caldera boundary faults. The reservoir extent and the seismicity distribution closely correlate with the area of maximum uplift, where accelerating deformation due to pore-fluid pressure is corroborated by laboratory experiments using site-relevantin-situ rock samples. These findings suggest that coupling between gas-reservoir pressure and the fibrous microstructure of the confining caprock drives the ground uplift. This structural-dynamic reconstruction of interconnected seismic and ground deformation processes provides a framework for forecasting the evolution of unrest, which is crucial for enhancing medium- and short-term multi-hazard assessment and mitigation strategies. Our results indicate that seismic activity and the potential for a phreatic explosion should be considered as plausible scenarios, prompting a reevaluation of the hazard assessment for the area.
- 18 March 2025
- Published by Copernicus GmbH
Open Access3D Structure and Dynamics of Campi Flegrei Enhance Multi-Hazard Assessment
Campi Flegrei is an active caldera in a densely populated area, currently experiencing significant ground uplift and seismicity. Leveraging precise relocations of extensive seismicity since 2014, we determined high resolution (250 m), 3D P- and S-wave seismic images of the inner caldera which we combine with a novel rock-physics experiment to characterize the primary features of the caldera’s 3D structure: a gas-rich reservoir below 2 km depth, a deformed caprock at 1 to 2 km depth, and a funnel-shaped, (thermo-metamorphic) basement below 3.5 km depth. Seismicity migrates downwards from the caprock to the reservoir, and, following reservoir depletion, stress loading triggers deeper, larger magnitude events along the inner-caldera boundary faults. The reservoir extent and the seismicity distribution closely correlate with the area of maximum uplift, where accelerating deformation due to pore-fluid pressure is corroborated by laboratory experiments using site-relevantin-situ rock samples. These findings suggest that coupling between gas-reservoir pressure and the fibrous microstructure of the confining caprock drives the ground uplift. This structural-dynamic reconstruction of interconnected seismic and ground deformation processes provides a framework for forecasting the evolution of unrest, which is crucial for enhancing medium- and short-term multi-hazard assessment and mitigation strategies. Our results indicate that seismic activity and the potential for a phreatic explosion should be considered as plausible scenarios, prompting a reevaluation of the hazard assessment for the area.
- Open Access
- 6 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Hydrothermal formation of fibrous mineral structures: The role on strength and mode of failure
Studying the mechanisms that control the rheology of rocks and geomaterials is crucial as much for predicting geological processes as for functionalizing geomaterials. That requires the understanding of how structural arrangements at the micro and nano scale control the physical and mechanical properties at the macroscopic scale. This is an area of rock physics still in its infancy. In this paper, we focus the attention on the formation of cementitious phases made of micro- and nano-scale fibrous structures, and the controls of the arrangement of these phases on mechanical properties. We use hydrothermal synthesis, and the properties of hydrothermal water, to promote the growth of fibrous mineral phases having nano-size diameter and length of a few microns, creating disordered and entangled mats of fibrous bundles as those found in natural samples. We draw inferences from structural microscopy to inform a statistical model that establishes an interdependence between structural parameters of fibrous structures and bulk mechanical response. Structural parameters include number and length of fibers, spatial orientation, and fraction of fibrous threads bearing the load. Mechanical properties include strength and mode of failure. Results show that as the fibrous microstructure evolves from ordered and aligned to disordered and entangled, the mechanical response of the fibrous composite transitions from a brittle to ductile behavior. Furthermore, the disordered and entangled microstructure exhibits lower strength at failure though strength increases as the number of fibers within the microstructure increases. Finally, the longer the entangled fiber, the larger the strain that the matrix can accommodate. The value of this study lies in further understanding fault healing through hydrothermal fluids and how the physical properties of fibrous microstructures resulting from it control brittle-ductile transitions, and possibly, slow slip events along subduction zones.
- 6 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Open AccessHydrothermal formation of fibrous mineral structures: The role on strength and mode of failure
Studying the mechanisms that control the rheology of rocks and geomaterials is crucial as much for predicting geological processes as for functionalizing geomaterials. That requires the understanding of how structural arrangements at the micro and nano scale control the physical and mechanical properties at the macroscopic scale. This is an area of rock physics still in its infancy. In this paper, we focus the attention on the formation of cementitious phases made of micro- and nano-scale fibrous structures, and the controls of the arrangement of these phases on mechanical properties. We use hydrothermal synthesis, and the properties of hydrothermal water, to promote the growth of fibrous mineral phases having nano-size diameter and length of a few microns, creating disordered and entangled mats of fibrous bundles as those found in natural samples. We draw inferences from structural microscopy to inform a statistical model that establishes an interdependence between structural parameters of fibrous structures and bulk mechanical response. Structural parameters include number and length of fibers, spatial orientation, and fraction of fibrous threads bearing the load. Mechanical properties include strength and mode of failure. Results show that as the fibrous microstructure evolves from ordered and aligned to disordered and entangled, the mechanical response of the fibrous composite transitions from a brittle to ductile behavior. Furthermore, the disordered and entangled microstructure exhibits lower strength at failure though strength increases as the number of fibers within the microstructure increases. Finally, the longer the entangled fiber, the larger the strain that the matrix can accommodate. The value of this study lies in further understanding fault healing through hydrothermal fluids and how the physical properties of fibrous microstructures resulting from it control brittle-ductile transitions, and possibly, slow slip events along subduction zones.
- Open Access
- 7 December 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 126 (12)
Assessing Crack‐Induced Compliance in Low Porosity Rocks Damaged by Thermo‐Hydro‐Chemo‐Mechanical Processes
Fracture geometry, density, and distribution control fluid and thermal transport in low porosity rocks, as well as their seismic attributes. The creation of cracks throughout the matrix can result in large and disparate reductions in P and S wave velocities with negligible porosity development, which breaks the classic velocity‐porosity relationship. Properly interpreting these signatures in seismic surveys from stimulated geothermal, oil, and gas reservoirs or seismogenic areas requires a rock physics model that uses realistic elastic properties of fractures. Conventional models for cracked rocks employ specific inclusion shapes such as spheroids with small aspect ratios. However, all these exhibit the same normal‐to‐shear compliance ratio—regardless of aspect ratio—and therefore impact the bulk and shear moduli in the same qualitative way. As such they are inadequate for describing many of the complementary evolutions of P and S wave velocities that transpire with the generation of cracks. Using a differential model of dimensionless compliances, we analyze published velocities for granite, basalt, and limestone to quantify typical compliance ratios and find that they are often different from those assumed in conventional crack models, which then affects crack density estimates. We also investigate how the total normal and shear compliances change due to certain thermo‐hydro‐chemo‐mechanical processes that generate large crack densities, and conclude that the final ratios often still deviate from that of conventional models. Finally, we demonstrate how the model can be used to describe scatter in both P and S wave velocity‐porosity trends. Implications for energy extraction and seismic monitoring are discussed.
- 7 December 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 126 (12)
Open AccessAssessing Crack‐Induced Compliance in Low Porosity Rocks Damaged by Thermo‐Hydro‐Chemo‐Mechanical Processes
Fracture geometry, density, and distribution control fluid and thermal transport in low porosity rocks, as well as their seismic attributes. The creation of cracks throughout the matrix can result in large and disparate reductions in P and S wave velocities with negligible porosity development, which breaks the classic velocity‐porosity relationship. Properly interpreting these signatures in seismic surveys from stimulated geothermal, oil, and gas reservoirs or seismogenic areas requires a rock physics model that uses realistic elastic properties of fractures. Conventional models for cracked rocks employ specific inclusion shapes such as spheroids with small aspect ratios. However, all these exhibit the same normal‐to‐shear compliance ratio—regardless of aspect ratio—and therefore impact the bulk and shear moduli in the same qualitative way. As such they are inadequate for describing many of the complementary evolutions of P and S wave velocities that transpire with the generation of cracks. Using a differential model of dimensionless compliances, we analyze published velocities for granite, basalt, and limestone to quantify typical compliance ratios and find that they are often different from those assumed in conventional crack models, which then affects crack density estimates. We also investigate how the total normal and shear compliances change due to certain thermo‐hydro‐chemo‐mechanical processes that generate large crack densities, and conclude that the final ratios often still deviate from that of conventional models. Finally, we demonstrate how the model can be used to describe scatter in both P and S wave velocity‐porosity trends. Implications for energy extraction and seismic monitoring are discussed.
- 12 November 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (2) , A13-A17
Elastic anisotropy of shales: The roles of crack alignment and compliance ratio
Cracks, broadly defined as compliant discontinuities, are a major cause of elastic anisotropy. However, few models are available for quantifying crack properties relevant to anisotropy. We developed a rock-physics model to quantify crack angular distribution and normal-to-tangential compliance ratio from pressure-dependent acoustic velocities measured in the laboratory. Our model uses a rectangular function of variable width and amplitude to extract the maximum dip angle of cracks, which is a direct quantification of crack alignment relative to the bedding plane. We tested the model on an organic-rich shale data set and confirmed that crack alignment and compliance ratio strongly impact Thomsen anisotropy parameters, thus demonstrating the model as a useful tool for better understanding how cracks affect elastic anisotropy.
- 12 November 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (2) , A13-A17
Elastic anisotropy of shales: The roles of crack alignment and compliance ratio
Cracks, broadly defined as compliant discontinuities, are a major cause of elastic anisotropy. However, few models are available for quantifying crack properties relevant to anisotropy. We developed a rock-physics model to quantify crack angular distribution and normal-to-tangential compliance ratio from pressure-dependent acoustic velocities measured in the laboratory. Our model uses a rectangular function of variable width and amplitude to extract the maximum dip angle of cracks, which is a direct quantification of crack alignment relative to the bedding plane. We tested the model on an organic-rich shale data set and confirmed that crack alignment and compliance ratio strongly impact Thomsen anisotropy parameters, thus demonstrating the model as a useful tool for better understanding how cracks affect elastic anisotropy.
- 29 September 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (1) , MR13-MR24
Acoustic velocity and permeability of acidized and propped fractures in shale
From geochemical reactions to proppant emplacement, hydraulic fracturing induces various chemomechanical fracture alterations in shale reservoirs. Hydraulic fracturing through the injection of a vast amount and variety of fluids and proppants has substantial impacts on fluid flow and hydrocarbon production. There is a strong need to improve our understanding on how fracture alterations affect flow pathways within the stimulated rock volume and develop monitoring tools. We have conducted time-lapse rock-physics experiments on clay-rich (carbonate-poor) Marcellus shales to characterize the acoustic velocity and permeability responses to fracture acidizing and propping. Acoustic P- and S-wave velocities and fracture permeability were measured before and after laboratory-induced fracture alterations along with microstructural imaging through X-ray computed tomography and scanning electron microscopy. Our experiments indicate that the S-wave velocity is an important geophysical observable, particularly the S-wave polarized perpendicular to fractures because it is sensitive to fracture stiffness. The acidizing and propping of a fracture decrease its elastic stiffness. This effect is stronger for acidizing, so it is possible that proppant monitoring will be masked by chemical alteration except when propping is highly efficient (i.e., most fractures are propped). However, fracture permeability is undermined by the softening of fracture surfaces due to acidizing, while being greatly enhanced by propping. These contrasting effects on fluid flow in combination with similar seismic attributes indicate the importance of experiments to improve existing rock-physics models, which must include changes to the rock frame. Such improvements are necessary for a correct interpretation of seismic velocity monitoring of flow pathways in stimulated shales.
- 29 September 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 87 (1) , MR13-MR24
Acoustic velocity and permeability of acidized and propped fractures in shale
From geochemical reactions to proppant emplacement, hydraulic fracturing induces various chemomechanical fracture alterations in shale reservoirs. Hydraulic fracturing through the injection of a vast amount and variety of fluids and proppants has substantial impacts on fluid flow and hydrocarbon production. There is a strong need to improve our understanding on how fracture alterations affect flow pathways within the stimulated rock volume and develop monitoring tools. We have conducted time-lapse rock-physics experiments on clay-rich (carbonate-poor) Marcellus shales to characterize the acoustic velocity and permeability responses to fracture acidizing and propping. Acoustic P- and S-wave velocities and fracture permeability were measured before and after laboratory-induced fracture alterations along with microstructural imaging through X-ray computed tomography and scanning electron microscopy. Our experiments indicate that the S-wave velocity is an important geophysical observable, particularly the S-wave polarized perpendicular to fractures because it is sensitive to fracture stiffness. The acidizing and propping of a fracture decrease its elastic stiffness. This effect is stronger for acidizing, so it is possible that proppant monitoring will be masked by chemical alteration except when propping is highly efficient (i.e., most fractures are propped). However, fracture permeability is undermined by the softening of fracture surfaces due to acidizing, while being greatly enhanced by propping. These contrasting effects on fluid flow in combination with similar seismic attributes indicate the importance of experiments to improve existing rock-physics models, which must include changes to the rock frame. Such improvements are necessary for a correct interpretation of seismic velocity monitoring of flow pathways in stimulated shales.
- Open Access
- 14 September 2021
- Published by Wiley in ESS Open Archive
Assessing Crack-Induced Compliance in Low Porosity Rocks Damaged by Thermo-Hydro-Chemo-Mechanical Processes
Fracture geometry, density, and distribution control fluid and thermal transport in low porosity rocks, as well as their seismic attributes. The creation of cracks throughout the matrix can result in large and disparate reductions in P- and S-wave velocities with negligible porosity development, which breaks the classic velocity-porosity relationship. Properly interpreting these signatures in seismic surveys from stimulated geothermal, oil, and gas reservoirs or seismogenic areas requires a rock physics model that uses realistic elastic properties of fractures. Conventional models for cracked rocks employ specific inclusion shapes such as spheroids with small aspect ratios. However, all these exhibit the same normal-to-shear compliance ratio -- regardless of aspect ratio -- and therefore impact the bulk and shear moduli in the same qualitative way. As such they are inadequate for describing many of the complementary evolutions of P- and S-wave velocities that transpire with the generation of cracks. Using a differential model of dimensionless compliances, we analyze published velocities for granite, basalt, and limestone to quantify typical compliance ratios and find that it is often different from that assumed in conventional crack models, which then affects crack density estimates. We also investigate how the total normal and shear compliances change due to certain thermo-hydro-chemo-mechanical processes that generate large crack densities, and conclude that the final ratios often still deviate from that of conventional models. Finally, we demonstrate how the model can be used to describe scatter in both P- and S-wave velocity-porosity trends. Implications for energy extraction and seismic monitoring are discussed.
- 14 September 2021
- Published by Wiley in ESS Open Archive
Open AccessAssessing Crack-Induced Compliance in Low Porosity Rocks Damaged by Thermo-Hydro-Chemo-Mechanical Processes
Fracture geometry, density, and distribution control fluid and thermal transport in low porosity rocks, as well as their seismic attributes. The creation of cracks throughout the matrix can result in large and disparate reductions in P- and S-wave velocities with negligible porosity development, which breaks the classic velocity-porosity relationship. Properly interpreting these signatures in seismic surveys from stimulated geothermal, oil, and gas reservoirs or seismogenic areas requires a rock physics model that uses realistic elastic properties of fractures. Conventional models for cracked rocks employ specific inclusion shapes such as spheroids with small aspect ratios. However, all these exhibit the same normal-to-shear compliance ratio -- regardless of aspect ratio -- and therefore impact the bulk and shear moduli in the same qualitative way. As such they are inadequate for describing many of the complementary evolutions of P- and S-wave velocities that transpire with the generation of cracks. Using a differential model of dimensionless compliances, we analyze published velocities for granite, basalt, and limestone to quantify typical compliance ratios and find that it is often different from that assumed in conventional crack models, which then affects crack density estimates. We also investigate how the total normal and shear compliances change due to certain thermo-hydro-chemo-mechanical processes that generate large crack densities, and conclude that the final ratios often still deviate from that of conventional models. Finally, we demonstrate how the model can be used to describe scatter in both P- and S-wave velocity-porosity trends. Implications for energy extraction and seismic monitoring are discussed.