Martyn Hann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martyn Hann has a total of 91 co-authors. Here are the top co-authors by number of shared publications:
- Deborah Greaves
University of Plymouth
11 shared publications - Edward Ransley
School of Engineering, Computing and Mathematics, University of Plymouth, Plymouth PL4 8AA, UK
8 shared publications - Scott Brown
School of Engineering, Computing and Mathematics, University of Plymouth, Plymouth PL4 8AA, UK
6 shared publications - Tom Tosdevin
University of Plymouth School of Engineering, Computing and Mathematics Drake Circus, Plymouth PL4 8AA , UK
5 shared publications - Jan Isberg
Uppsala University Box 65
4 shared publications - Jens Engström
Ångströmlaboratoriet, Division of Electricity, Uppsala University, Lägerhyddsvägen 1, 75237 Uppsala, Sweden
4 shared publications
Latest Publications
- Open Access
- 26 June 2026
- Published by Elsevier in Renewable Energy
- Vol. 273
Real-time hybrid testing of rotor control for a 15 MW floating wind turbine: platform pitch mitigation and rotor-speed stabilisation
- 26 June 2026
- Published by Elsevier in Renewable Energy
- Vol. 273
Open AccessReal-time hybrid testing of rotor control for a 15 MW floating wind turbine: platform pitch mitigation and rotor-speed stabilisation
- Open Access
- 21 March 2026
- Published by Elsevier in SSRN Electronic Journal
Real-time hybrid testing of rotor control for a 15 MW floating wind turbine: platform pitch mitigation and reliability improvement
Control strategies incorporating platform motion feedback have been developed and demonstrated via hydro-aero-servo-modelling for floating wind turbines to mitigate platform pitch motion and rotor speed variation, thereby improving system reliability and maintainability. The gain-scheduling floating feedback approach has shown distinct advantages over land-based and constant-gain control strategies in mitigating negative aerodynamic damping and reducing rotor speed variation above rated wind speed. Here we demonstrate its efficacy in a hybrid physical system, where the hydrodynamics is modelled physically (with Froude scaling) and the aerodynamics in turbulent wind under rotor control is simulated via the in-house aero-servo solver OREGEN_BEMT. The platform motion is measured optically and fed into the control algorithms in real time. The unsteady turbine thrust is replicated by a thruster at hub height, comprising two drone propellers. The experiments show that platform pitch motions near rated wind speed are markedly reduced by the gain-scheduling approach incorporating floating feedback, with the standard deviation roughly 50% lower than that of conventional land-based control. The rotor speed standard deviation is reduced by approximately 20%, accompanied by a slight increase in mean generator power and slightly reduced variability. This reduction in platform pitch motion is consistent with wind-only tests, indicating that the steep nonlinear waves tested do not impair control performance. Since blade pitch and generator torque variations within appropriate constraints are quite standard, the approach is effectively cost-free and easy to implement. This hybrid testing lends confidence to the practical applicability of the approach.
- 21 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessReal-time hybrid testing of rotor control for a 15 MW floating wind turbine: platform pitch mitigation and reliability improvement
Control strategies incorporating platform motion feedback have been developed and demonstrated via hydro-aero-servo-modelling for floating wind turbines to mitigate platform pitch motion and rotor speed variation, thereby improving system reliability and maintainability. The gain-scheduling floating feedback approach has shown distinct advantages over land-based and constant-gain control strategies in mitigating negative aerodynamic damping and reducing rotor speed variation above rated wind speed. Here we demonstrate its efficacy in a hybrid physical system, where the hydrodynamics is modelled physically (with Froude scaling) and the aerodynamics in turbulent wind under rotor control is simulated via the in-house aero-servo solver OREGEN_BEMT. The platform motion is measured optically and fed into the control algorithms in real time. The unsteady turbine thrust is replicated by a thruster at hub height, comprising two drone propellers. The experiments show that platform pitch motions near rated wind speed are markedly reduced by the gain-scheduling approach incorporating floating feedback, with the standard deviation roughly 50% lower than that of conventional land-based control. The rotor speed standard deviation is reduced by approximately 20%, accompanied by a slight increase in mean generator power and slightly reduced variability. This reduction in platform pitch motion is consistent with wind-only tests, indicating that the steep nonlinear waves tested do not impair control performance. Since blade pitch and generator torque variations within appropriate constraints are quite standard, the approach is effectively cost-free and easy to implement. This hybrid testing lends confidence to the practical applicability of the approach.
- Open Access
- 19 March 2025
- Published by Elsevier in Ocean Engineering
- Vol. 327
On the development and application of short design events for the prediction of extreme responses of floating offshore wind turbines
- 19 March 2025
- Published by Elsevier in Ocean Engineering
- Vol. 327
Open AccessOn the development and application of short design events for the prediction of extreme responses of floating offshore wind turbines
- Open Access
- 21 November 2023
- Published by Elsevier in Ocean Engineering
- Vol. 290
On the selection of design waves for predicting extreme motions of a floating offshore wind turbine
- 21 November 2023
- Published by Elsevier in Ocean Engineering
- Vol. 290
Open AccessOn the selection of design waves for predicting extreme motions of a floating offshore wind turbine
- Top Cited PapersOpen Access
- 28 June 2023
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 183
Evolution of floating offshore wind platforms: A review of at-sea devices
- 28 June 2023
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 183
Top Cited PapersOpen AccessEvolution of floating offshore wind platforms: A review of at-sea devices
- Open Access
- 1 January 2023
- Published by Elsevier in SSRN Electronic Journal
Evolution of Floating Offshore Wind Platforms: A Review of At-Sea Devices
Using floating platforms to support offshore wind turbines will be necessary for many countries to reach their Net-Zero targets, since much of the wind resource is located at water depths at which fixed offshore wind turbines are uneconomic. However, floating platforms for wind turbines are still at an early stage of development, and there are a wide range of platform designs. This paper reviews the current state-of-the-art of floating offshore wind turbine platform designs which currently have or have previously had a prototype, demonstration, or farm scale project at sea. The most common design goals for the platforms and the corresponding design features of platforms used to achieve those goals are reviewed. The development of each platform design is described, including evolving design goals and resulting changes in platform features. Finally, overall trends in platform designs are discussed and divided into three phases, defined by changing goals: (i) influences from the offshore oil and gas industry, (ii) specialization to floating offshore wind, and (iii) further specialization to local environment.
- 1 January 2023
- Published by Elsevier in SSRN Electronic Journal
Open AccessEvolution of Floating Offshore Wind Platforms: A Review of At-Sea Devices
Using floating platforms to support offshore wind turbines will be necessary for many countries to reach their Net-Zero targets, since much of the wind resource is located at water depths at which fixed offshore wind turbines are uneconomic. However, floating platforms for wind turbines are still at an early stage of development, and there are a wide range of platform designs. This paper reviews the current state-of-the-art of floating offshore wind turbine platform designs which currently have or have previously had a prototype, demonstration, or farm scale project at sea. The most common design goals for the platforms and the corresponding design features of platforms used to achieve those goals are reviewed. The development of each platform design is described, including evolving design goals and resulting changes in platform features. Finally, overall trends in platform designs are discussed and divided into three phases, defined by changing goals: (i) influences from the offshore oil and gas industry, (ii) specialization to floating offshore wind, and (iii) further specialization to local environment.
- Open Access
- 1 January 2023
- Published by ASME International in ASME Open Journal of Engineering
- Vol. 2
Real-Time Hybrid Testing of a Floating Offshore Wind Turbine Using a Surrogate-Based Aerodynamic Emulator
Physical modeling of floating offshore wind turbines (FOWTs) is challenging due to the complexities associated with the simultaneous application of two different scaling laws, governing the hydrodynamic and aerodynamic loading on the structure. To avoid these issues, this paper presents a real-time hybrid testing (RTHT) strategy in which a feedback loop, consisting of an on-board fan and control algorithm, is utilized to emulate the aerodynamic forces acting on the FOWT system. Here, we apply this strategy to a 70th-scale IEA Wind 15 MW reference wind turbine mounted on a version of the VolturnUS-S platform. Unlike other similar methods, which directly simulate the aerodynamic loads for the fan’s control using an aerodynamic code running in parallel with the experiment, this example utilizes a surrogate model trained on numerical model data calculated in advance. This strategy enables high-fidelity numerical model data, or even physical data, to be included in the aerodynamic emulation, by removing the requirement for real-time simulation, and, therefore, potentially enables more accurate loading predictions to be used in the experiments. This paper documents the development of the real-time hybrid testing system in the Coastal Ocean And Sediment Transport (COAST) Laboratory at the University of Plymouth in the UK, including the hardware, software, and instrumentation setup, and demonstrates the power of the surrogate-based aerodynamic emulator based on numerical data calculated using OpenFAST.
- 1 January 2023
- Published by ASME International in ASME Open Journal of Engineering
- Vol. 2
Open AccessReal-Time Hybrid Testing of a Floating Offshore Wind Turbine Using a Surrogate-Based Aerodynamic Emulator
Physical modeling of floating offshore wind turbines (FOWTs) is challenging due to the complexities associated with the simultaneous application of two different scaling laws, governing the hydrodynamic and aerodynamic loading on the structure. To avoid these issues, this paper presents a real-time hybrid testing (RTHT) strategy in which a feedback loop, consisting of an on-board fan and control algorithm, is utilized to emulate the aerodynamic forces acting on the FOWT system. Here, we apply this strategy to a 70th-scale IEA Wind 15 MW reference wind turbine mounted on a version of the VolturnUS-S platform. Unlike other similar methods, which directly simulate the aerodynamic loads for the fan’s control using an aerodynamic code running in parallel with the experiment, this example utilizes a surrogate model trained on numerical model data calculated in advance. This strategy enables high-fidelity numerical model data, or even physical data, to be included in the aerodynamic emulation, by removing the requirement for real-time simulation, and, therefore, potentially enables more accurate loading predictions to be used in the experiments. This paper documents the development of the real-time hybrid testing system in the Coastal Ocean And Sediment Transport (COAST) Laboratory at the University of Plymouth in the UK, including the hardware, software, and instrumentation setup, and demonstrates the power of the surrogate-based aerodynamic emulator based on numerical data calculated using OpenFAST.
- 5 December 2022
- Published by Elsevier in Ocean Engineering
- Vol. 267
A designed two-body hinged raft wave energy converter: From experimental study to annual power prediction for the EMEC site using WEC-Sim
- 5 December 2022
- Published by Elsevier in Ocean Engineering
- Vol. 267
A designed two-body hinged raft wave energy converter: From experimental study to annual power prediction for the EMEC site using WEC-Sim
- Open Access
OC6 Phase Ia: CFD Simulations of the Free-Decay Motion of the DeepCwind Semisubmersible
Currently, the design of floating offshore wind systems is primarily based on mid-fidelity models with empirical drag forces. The tuning of the model coefficients requires data from either experiments or high-fidelity simulations. As part of the OC6 (Offshore Code Comparison Collaboration, Continued, with Correlation, and unCertainty (OC6) is a project under the International Energy Agency Wind Task 30 framework) project, the present investigation explores the latter option. A verification and validation study of computational fluid dynamics (CFD) models of the DeepCwind semisubmersible undergoing free-decay motion is performed. Several institutions provided CFD results for validation against the OC6 experimental campaign. The objective is to evaluate whether the CFD setups of the participants can provide valid estimates of the hydrodynamic damping coefficients needed by mid-fidelity models. The linear and quadratic damping coefficients and the equivalent damping ratio are chosen as metrics for validation. Large numerical uncertainties are estimated for the linear and quadratic damping coefficients; however, the equivalent damping ratios are more consistently predicted with lower uncertainty. Some difference is observed between the experimental and CFD surge-decay motion, which is caused by mechanical damping not considered in the simulations that likely originated from the mooring setup, including a Coulomb-friction-type force. Overall, the simulations and the experiment show reasonable agreement, thus demonstrating the feasibility of using CFD simulations to tune mid-fidelity models.
Open AccessOC6 Phase Ia: CFD Simulations of the Free-Decay Motion of the DeepCwind Semisubmersible
Currently, the design of floating offshore wind systems is primarily based on mid-fidelity models with empirical drag forces. The tuning of the model coefficients requires data from either experiments or high-fidelity simulations. As part of the OC6 (Offshore Code Comparison Collaboration, Continued, with Correlation, and unCertainty (OC6) is a project under the International Energy Agency Wind Task 30 framework) project, the present investigation explores the latter option. A verification and validation study of computational fluid dynamics (CFD) models of the DeepCwind semisubmersible undergoing free-decay motion is performed. Several institutions provided CFD results for validation against the OC6 experimental campaign. The objective is to evaluate whether the CFD setups of the participants can provide valid estimates of the hydrodynamic damping coefficients needed by mid-fidelity models. The linear and quadratic damping coefficients and the equivalent damping ratio are chosen as metrics for validation. Large numerical uncertainties are estimated for the linear and quadratic damping coefficients; however, the equivalent damping ratios are more consistently predicted with lower uncertainty. Some difference is observed between the experimental and CFD surge-decay motion, which is caused by mechanical damping not considered in the simulations that likely originated from the mooring setup, including a Coulomb-friction-type force. Overall, the simulations and the experiment show reasonable agreement, thus demonstrating the feasibility of using CFD simulations to tune mid-fidelity models.
- 1 January 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 148 (1) , 04021039
Effect of the Current-Wave Angle on the Local Scour Around Circular Piles
This paper studies the effect of the wave front-current angle on the scour around a circular pile. An experimental study was carried out in the Coastal, Ocean and Sediment Transport (COAST) laboratory at the University of Plymouth (UK) using a single monopile of 0.125 m in diameter and an 8 m long by 1.5 m wide by 0.2 m high sand pit. The results obtained during the test campaign show the influence of the angle between waves and currents on both the maximum scour depth and the time scale of the process. Wave fronts partially aligned with current (65°) produce deeper scour holes than perpendicular forcing conditions (90°). Wave fronts partially against the current (115°) produce less scour than any of the two previous scenarios. The addition of waves reduced the maximum scour depth, compared with the current-only case. The development of the scour hole was found to be more rapid when waves are added to the current, with 50% of the final scour achieved in half the time. The results show that wave direction relative to the current is an important component in scour prediction.
- 1 January 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 148 (1) , 04021039
Effect of the Current-Wave Angle on the Local Scour Around Circular Piles
This paper studies the effect of the wave front-current angle on the scour around a circular pile. An experimental study was carried out in the Coastal, Ocean and Sediment Transport (COAST) laboratory at the University of Plymouth (UK) using a single monopile of 0.125 m in diameter and an 8 m long by 1.5 m wide by 0.2 m high sand pit. The results obtained during the test campaign show the influence of the angle between waves and currents on both the maximum scour depth and the time scale of the process. Wave fronts partially aligned with current (65°) produce deeper scour holes than perpendicular forcing conditions (90°). Wave fronts partially against the current (115°) produce less scour than any of the two previous scenarios. The addition of waves reduced the maximum scour depth, compared with the current-only case. The development of the scour hole was found to be more rapid when waves are added to the current, with 50% of the final scour achieved in half the time. The results show that wave direction relative to the current is an important component in scour prediction.