BKByunggi Kim

Byunggi Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Byunggi Kim has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Scalable Thermal Engineering via Femtosecond Laser‐Direct‐Written Phononic Nanostructures

    by Hiroki Hamma, Roman Anufriev, Kazuyoshi Fushinobu, Masahiro Nomura, Byunggi Kim

    Modern electronics demands innovative thermal management strategy beyond conventional approaches. Here, A transformative platform bridging laboratory‐scale phononic nanostructures and industrial‐scale thermal engineering is demonstrated via femtosecond laser‐induced periodic surface structures (fs‐LIPSS). Laser‐direct‐written phononic metamaterials is achieved with throughputs exceeding 10 − ⁵ m 2 s −1 —three orders of magnitude faster than electron beam lithography—while maintaining nanoscale resolution. Applied to silicon membranes, the fs‐LIPSS reduce thermal conductivity from 101 to 76 W m −1 K −1 , surpassing thin‐film limit predicted by Fuchs–Sondheimer model. Monte Carlo simulations corroborate these findings, showing that long mean free paths are limited by the fs‐LIPSS, while ablation‐induced roughness mediates isotropic modulation of thermal conductivity via enhanced diffuse scattering. Thus, this maskless and resist‐free process enables the fabrication of phononic nanostructures that are CMOS‐compatible and scalable to wafer‐level dimensions. This work establishes the fs‐LIPSS as a versatile approach that makes phonon engineering practical for real‐world devices, unlocking applications in quantum technologies, on‐chip energy conversion, and high‐performance computing.


  • Open Access

    Hypersonic acoustic wave control via stealthy hyperuniform phononic nanostructures

    by Michele Diego, Jade Hardouin, Gabrielle Mazevet-Schargrod, Matteo Pirro, Byunggi Kim, Roman Anufriev, Masahiro Nomura

    Controlling hypersonic surface acoustic waves is crucial for advanced phononic devices such as high-frequency filters, sensors, and quantum computing components. While periodic phononic crystals enable precise bandgap engineering, their ability to suppress acoustic waves is limited to specific frequency ranges. Here, we experimentally demonstrate surface acoustic wave control using a hyperuniform arrangement of gold nanopillars on a lithium niobate layer. The hyperuniform structure, exhibiting characteristics of both random and ordered systems, leads to broad-range acoustic transmission reduction and bandgap-like regions of particularly strong suppression. By integrating linear and S-shaped waveguides into the hyperuniform pattern, we achieve efficient waveguiding at frequencies within these bandgaps. Both simulations and experiments confirm high transmission through the waveguides, demonstrating the flexibility of hyperuniform structures to support complex waveguide shapes. These findings provide an alternative approach to overcome limitations of traditional phononic crystals and advance acoustic technologies such as mechanical quantum computing and smartphone filters.


  • Ultrahigh-temperature vacuum prober for electrical and thermal measurements

    by Laurent Jalabert, Jose Ordonez-Miranda, Yunhui Wu, Byunggi Kim, Roman Anufriev, Masahiro Nomura, Sebastian Volz

    We develop an ultrahigh-temperature vacuum probe station (UHT-VPS) featuring a sample holder heated by thermal radiation from a silicon carbide heater. This contactless configuration electrically isolates the sample from the high-power heating source through a vacuum gap, ensuring reliable measurements under extreme conditions. The capability of this UHT-VPS to measure electrical signals from 30 nV upward on bulk sapphire is demonstrated through the 3ω/2ω method. The measurements are continuously operated from 300 to 1150 K, under a high vacuum of 2 × 10−6 mbar, for a total of about 66 h without readjusting the contact, and yield the linear and quadratic temperature coefficients of resistance of chromium/platinum micro-resistances, as well as the sapphire’s thermal conductivity and thermal diffusivity. By recording the heater and sensor temperature signals up to 30 kHz and fitting them with theoretical models that take into account the quadratic temperature coefficient of resistance of Cr/Pt microwires, we obtain values in agreement with the literature data determined by optical methods. In this range of temperature, we also measure thermal conductivity, which cannot be directly accessed by optical methods. Our system thus provides an effective solution for simultaneously retrieving the electrical and thermal properties of materials using a single set of 3ω/2ω data up to unprecedented temperature levels.


  • Open Access

    Rapid Electro‐Thermal Micro‐Actuation of Flat Optics Enabled by Laser‐Induced Graphene on Colorless Polyimide Substrates

    by Byunggi Kim, Younggeun Lee, Dongwook Yang, Kazuyoshi Fushinobu, Young‐Jin Kim, Masahiro Nomura

    A high‐performance electro‐thermal micro‐actuator for active optical devices is demonstrated, fabricated via the direct laser writing (DLW) of laser‐induced graphene (LIG) onto a colorless polyimide (CPI) substrate. This approach leverages the unique combination of LIG's exceptional thermal conductivity (4.70–11.3 W m⁻¹K⁻¹, representing a two‐order‐of‐magnitude enhancement over CPI) and CPI's inherent transparency, flexibility, and high thermal stability. The LIG exhibits rapid thermal actuation of optically reflective surface with frequencies up to 2 kHz. Furthermore, the optically diffractive electro‐thermal actuators enable 0.5‐millidegree‐resolution beam steering with 0.9 s response times, transitioning the LIG actuators from the quasi‐steady state to an active regime. This high‐speed, high‐precision actuation mechanism demonstrates the potential for high‐speed dynamic optical control in compact systems, such as focus‐tunable lenses and beam‐steering devices. The single‐step DLW fabrication process on a readily available, flexible, and transparent substrate offers significant advantages in terms of cost‐effectiveness and scalability, making this approach highly promising for next‐generation lightweight, flexible, and integrated optoelectronic devices.


  • Thermal Property Estimation of Thin-Layered Structures by Means of Thermoreflectance Measurement and Network Identification by Deconvolution Algorithm

    by Daiki Higuma, João Vitor Thomsen Silveira, Byunggi Kim, Masahiro Nomura, Kazuyoshi Fushinobu

    Laser-induced forward transfer (LIFT) is a powerful tool for micro and nanoscale digital printing of metals for electronic packaging. In the metal LIFT process, the donor thin metal film is propelled to the receiving substrate and deposited on it. Morphology of the deposited metal varies with the thermodynamic responses of the donor thin film during and after the laser heating. Thus, the thermophysical properties of the multilayered donor sample are important to predict the LIFT process accurately. Here, we investigated thermophysical properties of a 100 nm-thick gold coated on 0.5 mm-thick sapphire and silicon substrates by means of the nanosecond time-domain thermoreflectance (ns-TDTR) analyzed by the network identification by deconvolution (NID) algorithm, which does not require numerical simulation or analytical solution. The NID algorithm enabled us to extract the thermal time constants of the sample from the nanosecond thermal decay of the sample surface. Furthermore, the cumulative and differential structure functions allowed us to investigate the heat flow path, giving the interfacial thermal resistance and the thermal conductivity of the substrate. After calibration of the NID algorithm using the thermal conductivity of the sapphire, the thermal conductivity of the silicon was determined to be 107–151 W/(m K), which is in good agreement with the widely accepted range of 110–148 W/(m K). Our study shows the feasibility of the structure function obtained from the single-shot TDTR experiments for thermal property estimation in laser processing and electronics packaging applications.

  • Open Access

    Tailoring Phonon Dispersion of a Genetically Designed Nanophononic Metasurface

    by Michele Diego, Matteo Pirro, Byunggi Kim, Roman Anufriev, Masahiro Nomura

    Phonon engineering at the nanoscale holds immense promise for a myriad of applications. However, the design of phononic devices continues to rely on regular shapes chosen according to long-established simple rules. Here, we demonstrate an inverse design approach to create a two-dimensional phononic metasurface exhibiting a highly anisotropic phonon dispersion along the main axes of the Brillouin zone. A partial hypersonic bandgap of approximately 3.5 GHz is present along one axis, with gap closure along the orthogonal axis. Such a level of control is achieved through genetically optimized unit cells, with shapes exceeding conventional intuition. We experimentally validated our theoretical predictions using Brillouin light scattering, confirming the effectiveness of the inverse design method. Our approach unlocks the potential for automated engineering of phononic metasurfaces with on-demand functionalities, thus leading toward innovative phononic devices beyond the limitations of traditional design paradigms.


  • Piezoelectrically driven diamond phononic nanocavity by phonon-matching scheme for quantum applications

    by Michele Diego, Byunggi Kim, Matteo Pirro, Sebastian Volz, Masahiro Nomura

    Efficiently exciting and controlling phonons in diamond nanoresonators represents a fundamental challenge for quantum applications. Here, we theoretically demonstrate the possibility of exciting mechanical modes within a double hybrid cavity (DHC), formed by adjoining to a diamond cavity a second cavity made of aluminum nitride. The latter is piezoelectric and serves as a microwave-to-phonon transducer, activating mechanical modes in the entire DHC. We show the process of matching the cavities’ phononic properties, making them work coordinately in the DHC and obtaining a well-confined mode. In the diamond part of the cavity, this mode replicates the fundamental mode of the individual diamond cavity, showing that the piezoelectric transducer does not alter the diamond individual fundamental mode. In the piezoelectric part, the strong confinement of stress and electric field results in a high piezoelectric coupling rate, demonstrating the effectiveness of a phononic cavity as a transducer. The study is contextualized in the framework of a quantum networking application, where the DHC serves as a spin qubit, exploiting the spin-mechanical coupling within diamond color centers.


  • Enhanced Far-Field Thermal Radiation through a Polaritonic Waveguide

    by Saeko Tachikawa, Jose Ordonez-Miranda, Laurent Jalabert, Yunhui Wu, Roman Anufriev, Yangyu Guo, Byunggi Kim, Hiroyuki Fujita, Sebastian Volz, Masahiro Nomura

    We experimentally demonstrate the enhancement of the far-field thermal radiation between two nonabsorbent Si microplates coated with energy-absorbent silicon dioxide (SiO2) nanolayers supporting the propagation of surface phonon polaritons. By measuring the radiative thermal conductance between two coated Si plates, we find that its values are twice those obtained without the SiO2 coating. This twofold increase results from the hybridization of polaritons with guided modes inside Si and is well predicted by fluctuational electrodynamics and an analytical model based on a two-dimensional density of polariton states. These findings could be applied to thermal management in microelectronics, silicon photonics, energy conversion, atmospheric sciences, and astrophysics.


  • Anisotropy Reversal of Thermal Conductivity in Silicon Nanowire Networks Driven by Quasi-Ballistic Phonon Transport

    by Byunggi Kim, Félix Barbier-Chebbah, Yohei Ogawara, Laurent Jalabert, Ryoto Yanagisawa, Roman Anufriev, Masahiro Nomura

    Nanostructured semiconductors promise functional thermal management for microelectronics and thermoelectrics through a rich design capability. However, experimental studies on anisotropic in-plane thermal conduction remain limited, despite the demand for directional heat dissipation. Here, inspired by an oriental wave pattern, a periodic network of bent wires, we investigate anisotropic in-plane thermal conduction in nanoscale silicon phononic crystals with the thermally dead volume. We observed the anisotropy reversal of the material thermal conductivity from 1.2 at 300 K to 0.8 at 4 K, with the reversal temperature of 80 K mediated by the transition from a diffusive to a quasi-ballistic regime. Our Monte Carlo simulations revealed that the backflow of the directional phonons induces the anisotropy reversal, showing that the quasi-ballistic phonon transport introduces preferential thermal conduction channels with anomalous temperature dependence. Accordingly, the anisotropy of the effective thermal conductivity varied from 2.7 to 5.0 in the range of 4-300 K, indicating an anisotropic heat manipulation capability. Our findings demonstrate that the design of nanowire networks enables the directional thermal management of electronic devices.