Daniel E. S. Rodrigues
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Daniel E. S. Rodrigues has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jorge Belinha
School of Engineering, Polytechnic of Porto
12 shared publications - Renato Manuel Natal Jorge
LAETA—Laboratório Associado de Energia, Transportes e Aeronáutica, Universidade do Porto, 4200-165 Porto, Portugal
6 shared publications L.M.J.S. Dinis
4 shared publicationsJ. Belinha
School of Engineering of the Polytechnic of Porto, Rua Dr. António Bernardino de Almeida 431, 4200-072 Porto, Portugal
3 shared publicationsR.M. Natal Jorge
3 shared publicationsJ Belinha
School of Engineering, Polytechnic of Porto (ISEP), Porto, Portugal
2 shared publications
Latest Publications
- Open Access
- 11 November 2026
- Published by MDPI AG in Computation
- Vol. 14 (11) , 286
Bone-Remodelling-Based Structural Optimisation of a Perseverance-Inspired Rover Wheel-Support Component Using Meshless Methods
This study investigates the structural optimisation of a rover wheel-support component using a bio-inspired bone-remodelling algorithm combined with the finite element method (FEM), the radial point interpolation method (RPIM), and the natural neighbour radial point interpolation method (NNRPIM). This study is divided into two stages. First, the influence of the discretisation technique, nodal density and remodelling parameters on the resulting material distributions is examined using a two-dimensional cantilever-beam benchmark. The bone-remodelling algorithm produced admissible load-path configurations for every numerical formulation considered, and the reconstructed benchmark models showed stiffness differences below 1% when cross-analysed with FEM, RPIM and NNRPIM. In the second stage, the algorithm is applied to a two-dimensional design domain representing the component connecting the wheel to the suspension system of the Perseverance rover. Three optimised topologies are independently generated with FEM, RPIM and NNRPIM, reconstructed, and subsequently cross-analysed with the three structural solvers. In two dimensions, the original model presents a mass-normalised stiffness between 205.86 and 210.74 N/mm/kg, whereas the bone-remodelled designs provide values between 351.01 and 446.51 N/mm/kg. For the extruded three-dimensional models, this indicator increases from 208.93–221.53 N/mm/kg to 369.85–476.63 N/mm/kg. The corresponding von Mises stress fields remain well below the aluminium yield strength, and the three numerical formulations provide consistent structural trends. The results show that the adopted bone-remodelling strategy can be transferred from biomechanical analysis to engineering structural optimisation and that RPIM and NNRPIM provide suitable alternatives to FEM for this iterative remodelling framework.
- 11 November 2026
- Published by MDPI AG in Computation
- Vol. 14 (11) , 286
Open AccessBone-Remodelling-Based Structural Optimisation of a Perseverance-Inspired Rover Wheel-Support Component Using Meshless Methods
This study investigates the structural optimisation of a rover wheel-support component using a bio-inspired bone-remodelling algorithm combined with the finite element method (FEM), the radial point interpolation method (RPIM), and the natural neighbour radial point interpolation method (NNRPIM). This study is divided into two stages. First, the influence of the discretisation technique, nodal density and remodelling parameters on the resulting material distributions is examined using a two-dimensional cantilever-beam benchmark. The bone-remodelling algorithm produced admissible load-path configurations for every numerical formulation considered, and the reconstructed benchmark models showed stiffness differences below 1% when cross-analysed with FEM, RPIM and NNRPIM. In the second stage, the algorithm is applied to a two-dimensional design domain representing the component connecting the wheel to the suspension system of the Perseverance rover. Three optimised topologies are independently generated with FEM, RPIM and NNRPIM, reconstructed, and subsequently cross-analysed with the three structural solvers. In two dimensions, the original model presents a mass-normalised stiffness between 205.86 and 210.74 N/mm/kg, whereas the bone-remodelled designs provide values between 351.01 and 446.51 N/mm/kg. For the extruded three-dimensional models, this indicator increases from 208.93–221.53 N/mm/kg to 369.85–476.63 N/mm/kg. The corresponding von Mises stress fields remain well below the aluminium yield strength, and the three numerical formulations provide consistent structural trends. The results show that the adopted bone-remodelling strategy can be transferred from biomechanical analysis to engineering structural optimisation and that RPIM and NNRPIM provide suitable alternatives to FEM for this iterative remodelling framework.
- 12 June 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (8) , 1-23
Design optimization of NASA’s Perseverance rover wheel spokes using a meshless method
- 12 June 2025
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 47 (8) , 1-23
Design optimization of NASA’s Perseverance rover wheel spokes using a meshless method
- Open Access
- 22 November 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12591
Elastoplastic Analysis of Frame Structures Using Radial Point Interpolation Meshless Methods
The need to design structures and structural elements that are more efficient in terms of performance is a key aspect of engineering. For a given material to be used at its maximum capacity, considering non-linear characteristics is mandatory. The non-linear regime is a subject of extreme interest for this reason and is an area with intense research activity. In this work, advanced discretization techniques (i.e., meshless methods) are applied in the elastoplastic analysis of 2D and 3D structural elements. The literature shows that meshless methods are capable of producing more accurate and smoother strain and stress fields, which are the variable fields required in the non-linear models describing elastoplasticity. Thus, in this study, the Radial Point Interpolation Method (RPIM) and the Natural Neighbor Radial Point Interpolation Method (NNRPIM) are combined with a non-linear iterative algorithm, fully developed by the authors, with the objective of analyzing for the first time the elastoplastic behavior of a two-bay asymmetric frame and bowstring bridge considering 2D and 3D analysis. The accuracy and robustness of the RPIM and the NNRPIM are shown in the end, comparing the obtained results with FEM solutions and the available literature.
- 22 November 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12591
Open AccessElastoplastic Analysis of Frame Structures Using Radial Point Interpolation Meshless Methods
The need to design structures and structural elements that are more efficient in terms of performance is a key aspect of engineering. For a given material to be used at its maximum capacity, considering non-linear characteristics is mandatory. The non-linear regime is a subject of extreme interest for this reason and is an area with intense research activity. In this work, advanced discretization techniques (i.e., meshless methods) are applied in the elastoplastic analysis of 2D and 3D structural elements. The literature shows that meshless methods are capable of producing more accurate and smoother strain and stress fields, which are the variable fields required in the non-linear models describing elastoplasticity. Thus, in this study, the Radial Point Interpolation Method (RPIM) and the Natural Neighbor Radial Point Interpolation Method (NNRPIM) are combined with a non-linear iterative algorithm, fully developed by the authors, with the objective of analyzing for the first time the elastoplastic behavior of a two-bay asymmetric frame and bowstring bridge considering 2D and 3D analysis. The accuracy and robustness of the RPIM and the NNRPIM are shown in the end, comparing the obtained results with FEM solutions and the available literature.
- 6 November 2023
- Published by Emerald Publishing in Engineering Computations
- Vol. 40 (9/10) , 2558-2593
Numerical simulation of the extrusion process of viscoplastic materials using a radial point interpolation method
Fused Filament Fabrication (FFF) is an extrusion-based manufacturing process using fused thermoplastics. Despite its low cost, the FFF is not extensively used in high-value industrial sectors mainly due to parts' anisotropy (related to the deposition strategy) and residual stresses (caused by successive heating cycles). Thus, this study aims to investigate the process improvement and the optimization of the printed parts. In this work, a meshless technique – the Radial Point Interpolation Method (RPIM) – is used to numerically simulate the viscoplastic extrusion process – the initial phase of the FFF. Unlike the FEM, in meshless methods, there is no pre-established relationship between the nodes so the nodal mesh will not face mesh distortions and the discretization can easily be modified by adding or removing nodes from the initial nodal mesh. The accuracy of the obtained results highlights the importance of using meshless techniques in this field. Meshless methods show particular relevance in this topic since the nodes can be distributed to match the layer-by-layer growing condition of the printing process. Using the flow formulation combined with the heat transfer formulation presented here for the first time within an in-house RPIM code, an algorithm is proposed, implemented and validated for benchmark examples.
- 6 November 2023
- Published by Emerald Publishing in Engineering Computations
- Vol. 40 (9/10) , 2558-2593
Numerical simulation of the extrusion process of viscoplastic materials using a radial point interpolation method
Fused Filament Fabrication (FFF) is an extrusion-based manufacturing process using fused thermoplastics. Despite its low cost, the FFF is not extensively used in high-value industrial sectors mainly due to parts' anisotropy (related to the deposition strategy) and residual stresses (caused by successive heating cycles). Thus, this study aims to investigate the process improvement and the optimization of the printed parts. In this work, a meshless technique – the Radial Point Interpolation Method (RPIM) – is used to numerically simulate the viscoplastic extrusion process – the initial phase of the FFF. Unlike the FEM, in meshless methods, there is no pre-established relationship between the nodes so the nodal mesh will not face mesh distortions and the discretization can easily be modified by adding or removing nodes from the initial nodal mesh. The accuracy of the obtained results highlights the importance of using meshless techniques in this field. Meshless methods show particular relevance in this topic since the nodes can be distributed to match the layer-by-layer growing condition of the printing process. Using the flow formulation combined with the heat transfer formulation presented here for the first time within an in-house RPIM code, an algorithm is proposed, implemented and validated for benchmark examples.
- 1 October 2021
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 208, 106688
Optimizing a meshless method for the simulation of the extrusion of non-Newtonian materials
- 1 October 2021
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 208, 106688
Optimizing a meshless method for the simulation of the extrusion of non-Newtonian materials
- 5 July 2021
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
- Vol. 10 (03)
The natural neighbor radial point interpolation method in the Elasto-Static analysis of Honeycomb-Shaped foams
Cellular solid materials are progressively becoming more predominant in lightweight structural applications as more technologies realize these materials can be improved in terms of performance, quality control, repeatability and production costs, when allied with fast developing manufacturing technologies such as Additive Manufacturing. In parallel, the rapid advances in computational power and the use of new numerical methods, such as Meshless Methods, in addition to the Finite Element Method (FEM) are highly beneficial and allow for more accurate studies of a wide range of topologies associated with the architecture of cellular solid materials. Since these materials are commonly used as the cores of sandwich panels, in this work, two different topologies were designed — conventional honeycombs and re-entrant honeycombs — for 7 different values of relative density, and tested on the linear-elastic domain, in both in-plane directions, using the Natural Neighbor Radial Point Interpolation Method (NNRPIM), a newly developed meshless method, and the Finite Element Method (FEM) for comparison purposes.
- 5 July 2021
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
- Vol. 10 (03)
The natural neighbor radial point interpolation method in the Elasto-Static analysis of Honeycomb-Shaped foams
Cellular solid materials are progressively becoming more predominant in lightweight structural applications as more technologies realize these materials can be improved in terms of performance, quality control, repeatability and production costs, when allied with fast developing manufacturing technologies such as Additive Manufacturing. In parallel, the rapid advances in computational power and the use of new numerical methods, such as Meshless Methods, in addition to the Finite Element Method (FEM) are highly beneficial and allow for more accurate studies of a wide range of topologies associated with the architecture of cellular solid materials. Since these materials are commonly used as the cores of sandwich panels, in this work, two different topologies were designed — conventional honeycombs and re-entrant honeycombs — for 7 different values of relative density, and tested on the linear-elastic domain, in both in-plane directions, using the Natural Neighbor Radial Point Interpolation Method (NNRPIM), a newly developed meshless method, and the Finite Element Method (FEM) for comparison purposes.
- 27 January 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 235 (6) , 1203-1225
Simulation of the viscoplastic extrusion process using the radial point interpolation meshless method
Additive manufacturing is an emergent technology, which witnessed a large growth demanded by the consumer market. Despite this growth, the technology needs scientific regulation and guidelines to be reliable and consistent to the point that is feasible to be used as a source of manufactured end-products. One of the processes that has seen the most significant development is the fused deposition modeling, more commonly known as 3D printing. The motivation to better understand this process makes the study of extrusion of materials important. In this work, the radial point interpolation method, a meshless method, is applied to the study of extrusion of viscoplastic materials, using the formulation originally intended for the finite element method, the flow formulation. This formulation is based on the reasoning that solid materials under those conditions behave like non-Newtonian fluids. The time stepped analysis follows the Lagrangian approach taking advantage of the easy remeshing inherent to meshless methods. To validate the newly developed numerical tool, tests are conducted with numerical examples obtained from the literature for the extrusion of aluminum, which is a more common problem. Thus, after the performed validation, the algorithm can easily be adapted to simulate the extrusion of polymers in fused deposition modeling processes.
- 27 January 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 235 (6) , 1203-1225
Simulation of the viscoplastic extrusion process using the radial point interpolation meshless method
Additive manufacturing is an emergent technology, which witnessed a large growth demanded by the consumer market. Despite this growth, the technology needs scientific regulation and guidelines to be reliable and consistent to the point that is feasible to be used as a source of manufactured end-products. One of the processes that has seen the most significant development is the fused deposition modeling, more commonly known as 3D printing. The motivation to better understand this process makes the study of extrusion of materials important. In this work, the radial point interpolation method, a meshless method, is applied to the study of extrusion of viscoplastic materials, using the formulation originally intended for the finite element method, the flow formulation. This formulation is based on the reasoning that solid materials under those conditions behave like non-Newtonian fluids. The time stepped analysis follows the Lagrangian approach taking advantage of the easy remeshing inherent to meshless methods. To validate the newly developed numerical tool, tests are conducted with numerical examples obtained from the literature for the extrusion of aluminum, which is a more common problem. Thus, after the performed validation, the algorithm can easily be adapted to simulate the extrusion of polymers in fused deposition modeling processes.
- 12 January 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 235 (6) , 1368-1381
The elasto-plastic analysis of 3D-printed thermoplastics using the NNRPIM and a modified hill yield criterion
The Fused Filament Fabrication is a 3D printing technology that allows the production of components and structures with complex geometries at low-cost, using thermoplastic materials as feedstock. This additive manufacturing technique is not yet extensively used in industries mainly due to parts’ anisotropy – which is the consequence of the deposition strategy – and residual stresses, caused by successive heating cycles. Thus, these topics have great influence on the non-linear mechanical performance of 3D printed parts. Additionally, the materials used in the Fused Filament Fabrication have distinct mechanical behaviours under tensile and compression loads. This work proposes a computational framework – using a meshless method as the numeric discretization technique, the Natural Neighbour Radial Point Interpolation method – capable to analyse the elastoplastic response of ductile materials showing distinct compressive and tensile responses, through the implementation of a modified version of the Hill yield surface. In those conditions, 3D-printed specimens of polylactic acid are tested experimentally and numerically using standard tensile and compression tests. The numerical approach is validated by comparing the numerical and the experimental curves. Then, the accuracy of the methodology is proved and the purpose of using the modified Hill yield criterion is clearly shown using a benchmark example.
- 12 January 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 235 (6) , 1368-1381
The elasto-plastic analysis of 3D-printed thermoplastics using the NNRPIM and a modified hill yield criterion
The Fused Filament Fabrication is a 3D printing technology that allows the production of components and structures with complex geometries at low-cost, using thermoplastic materials as feedstock. This additive manufacturing technique is not yet extensively used in industries mainly due to parts’ anisotropy – which is the consequence of the deposition strategy – and residual stresses, caused by successive heating cycles. Thus, these topics have great influence on the non-linear mechanical performance of 3D printed parts. Additionally, the materials used in the Fused Filament Fabrication have distinct mechanical behaviours under tensile and compression loads. This work proposes a computational framework – using a meshless method as the numeric discretization technique, the Natural Neighbour Radial Point Interpolation method – capable to analyse the elastoplastic response of ductile materials showing distinct compressive and tensile responses, through the implementation of a modified version of the Hill yield surface. In those conditions, 3D-printed specimens of polylactic acid are tested experimentally and numerically using standard tensile and compression tests. The numerical approach is validated by comparing the numerical and the experimental curves. Then, the accuracy of the methodology is proved and the purpose of using the modified Hill yield criterion is clearly shown using a benchmark example.
- 1 January 2021
- Published by Elsevier in Composite Structures
- Vol. 255
A meshless study of antisymmetric angle-ply laminates using high-order shear deformation theories
- 1 January 2021
- Published by Elsevier in Composite Structures
- Vol. 255
A meshless study of antisymmetric angle-ply laminates using high-order shear deformation theories