Naveen Mani Tripathi
Naveen Mani Tripathi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Haim Kalman
5 shared publications- Avi Levy
The Pearlstone Center for Aeronautical Engineering Studies, Department of Mechanical Engineering, Ben-Gurion University of the Negev , P. O. Box 653, Beer-Sheva 8410530
4 shared publications Nir Santo
4 shared publications- Akant Kumar Singh
Chandigarh University
3 shared publications - Dmitry Portnikov
The Laboratory for Conveying and Handling of Particulate Solids, Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer Sheva 84105, Israel
3 shared publications - Haim Kalman
The Laboratory for Conveying and Handling of Particulate Solids, Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer Sheva, Israel
3 shared publications
Latest Publications
- 21 July 2026
- Published by Taylor & Francis
- p. 142-170
Thermo-Mechanical Behavior of Additively Manufactured Materials: Insights and Analysis
Additive manufacturing (AM), also known as 3D printing, is a manufacturing technique to create different components or parts layer by layer with the help of digital 3D models. With AM, it has become easy to produce difficult shapes or geometries, which are not possible in the case of traditional manufacturing methods like casting, forging, or rolling. The benefits of AM include a reduction in material waste and using a range of materials like composites, metals, ceramics, and plastics. Thus, the motive behind this chapter is to provide key insights into the mechanical and thermal behavior of materials like ceramic matrix composites (CMCs), metal matrix composites (MMCs), and polymer matrix composites (PMCs), which are developed using 3D printing. This behavior is important to study to know how the materials respond to both thermal and mechanical loads, which significantly influence their structural integrity, reliability, and service life. Analyzing the thermo-mechanical behavior of these materials is an important aspect in the selection of material, failure prediction, and product development. Furthermore, this chapter identifies research gaps from previous studies for future research.
- 21 July 2026
- Published by Taylor & Francis
- p. 142-170
Thermo-Mechanical Behavior of Additively Manufactured Materials: Insights and Analysis
Additive manufacturing (AM), also known as 3D printing, is a manufacturing technique to create different components or parts layer by layer with the help of digital 3D models. With AM, it has become easy to produce difficult shapes or geometries, which are not possible in the case of traditional manufacturing methods like casting, forging, or rolling. The benefits of AM include a reduction in material waste and using a range of materials like composites, metals, ceramics, and plastics. Thus, the motive behind this chapter is to provide key insights into the mechanical and thermal behavior of materials like ceramic matrix composites (CMCs), metal matrix composites (MMCs), and polymer matrix composites (PMCs), which are developed using 3D printing. This behavior is important to study to know how the materials respond to both thermal and mechanical loads, which significantly influence their structural integrity, reliability, and service life. Analyzing the thermo-mechanical behavior of these materials is an important aspect in the selection of material, failure prediction, and product development. Furthermore, this chapter identifies research gaps from previous studies for future research.
- 21 July 2026
- Published by Taylor & Francis
- p. 121-130
Sustainable Development with Additive Manufactured Materials
Additive manufacturing (AM), also referred to as 3D printing, is arguably one of the emerging technologies that has fundamentally changed the paradigm of sustainable growth. AM technology strives to achieve material efficiency by allowing complex geometries to be fabricated layer by layer from computer-aided design (CAD) models, tremendously reducing wastage when compared to traditional methods of manufacturing. This feature is particularly useful in the aerospace and automotive industries where lightweight designs are essential to conserve energy and reduce emissions. In addition, AM allows for the employment of greener and more bio-based materials, including mycelium composites and recycled polymers, which makes the process even more environmentally friendly. This technology also enables decentralized manufacturing, which reduces transportation emissions and builds more robust supply chains. However, there are still certain gaps that need to be addressed, such as exceptional energy use from some AM processes and the lack of adequate sustainability measures within the full product life cycle. In order to harness the full potential of the AM industry towards sustainable practices, the focus of the study presented in this chapter is to develop a novel evaluation metric to access the sustainability score of a product to be developed through additive manufacturing.
- 21 July 2026
- Published by Taylor & Francis
- p. 121-130
Sustainable Development with Additive Manufactured Materials
Additive manufacturing (AM), also referred to as 3D printing, is arguably one of the emerging technologies that has fundamentally changed the paradigm of sustainable growth. AM technology strives to achieve material efficiency by allowing complex geometries to be fabricated layer by layer from computer-aided design (CAD) models, tremendously reducing wastage when compared to traditional methods of manufacturing. This feature is particularly useful in the aerospace and automotive industries where lightweight designs are essential to conserve energy and reduce emissions. In addition, AM allows for the employment of greener and more bio-based materials, including mycelium composites and recycled polymers, which makes the process even more environmentally friendly. This technology also enables decentralized manufacturing, which reduces transportation emissions and builds more robust supply chains. However, there are still certain gaps that need to be addressed, such as exceptional energy use from some AM processes and the lack of adequate sustainability measures within the full product life cycle. In order to harness the full potential of the AM industry towards sustainable practices, the focus of the study presented in this chapter is to develop a novel evaluation metric to access the sustainability score of a product to be developed through additive manufacturing.
- 21 July 2026
- Published by Taylor & Francis
- p. 197-211
Medical Applications of Additive Manufacturing and Future Scope
Additive manufacturing (AM), also known as 3D printing, has become a futuristic and revolutionary technology in the medical field, evolving from basic prototyping to the manufacture of functional devices, specifically formulated for a particular patient. This chapter summarizes the state of AM in the medical field today, distinguishing its most important applications through complete case studies. It explores the production of patient-specific implants, surgical models for pre-surgical planning, and personalized medical devices. It focuses on different AM processes and materials, and the advantages they present over ordinary manufacturing, including greater precision, low cost, and better patient results. The chapter concludes with an investigation into the future possibility of medical AM based on developing trends such as bioprinting, multi-material printing, and intelligent materials, while also meeting present challenges based on controlling limitations and technological restrictions.
- 21 July 2026
- Published by Taylor & Francis
- p. 197-211
Medical Applications of Additive Manufacturing and Future Scope
Additive manufacturing (AM), also known as 3D printing, has become a futuristic and revolutionary technology in the medical field, evolving from basic prototyping to the manufacture of functional devices, specifically formulated for a particular patient. This chapter summarizes the state of AM in the medical field today, distinguishing its most important applications through complete case studies. It explores the production of patient-specific implants, surgical models for pre-surgical planning, and personalized medical devices. It focuses on different AM processes and materials, and the advantages they present over ordinary manufacturing, including greater precision, low cost, and better patient results. The chapter concludes with an investigation into the future possibility of medical AM based on developing trends such as bioprinting, multi-material printing, and intelligent materials, while also meeting present challenges based on controlling limitations and technological restrictions.
- 21 July 2026
- Published by Taylor & Francis
- p. 1-13
Introduction to Materials Used for Additive Manufacturing
Additive manufacturing (AM) techniques enable researchers to develop complex components with a wide range of materials that include materials like polymers, metal and ceramics. These are the three basics categories of material for AM. These materials have their own importance with respect to their applications. Polymer material mostly uses lightweight and low-strength applications. Creating prototypes within a few minutes, polymer material is used. Metallic material is used for heavy-duty applications. Developing a product with high strength for heavy-duty applications, metallic material is used. Ceramic material has challenges due to its brittleness and abrasive nature. Ceramic material applications are used in biomedical implants. The required components can be created directly from a Computer-Aided Design (CAD) drawing with AM techniques. This chapter represents the materials used for AM and their advancements.
- 21 July 2026
- Published by Taylor & Francis
- p. 1-13
Introduction to Materials Used for Additive Manufacturing
Additive manufacturing (AM) techniques enable researchers to develop complex components with a wide range of materials that include materials like polymers, metal and ceramics. These are the three basics categories of material for AM. These materials have their own importance with respect to their applications. Polymer material mostly uses lightweight and low-strength applications. Creating prototypes within a few minutes, polymer material is used. Metallic material is used for heavy-duty applications. Developing a product with high strength for heavy-duty applications, metallic material is used. Ceramic material has challenges due to its brittleness and abrasive nature. Ceramic material applications are used in biomedical implants. The required components can be created directly from a Computer-Aided Design (CAD) drawing with AM techniques. This chapter represents the materials used for AM and their advancements.
- 13 July 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (28) , 15317-15331
Experimental Investigation of Recycling of MLP and LDPE Plastic Waste into Cofiring Fuel and Sustainable Materials
- 13 July 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (28) , 15317-15331
Experimental Investigation of Recycling of MLP and LDPE Plastic Waste into Cofiring Fuel and Sustainable Materials
- Open Access
- 24 March 2026
- Published by Elsevier in Next Materials
- Vol. 11
Influence of palmyra palm sprouts with E-glass and SiC on mechanical properties of hybrid laminated composites
- 24 March 2026
- Published by Elsevier in Next Materials
- Vol. 11
Open AccessInfluence of palmyra palm sprouts with E-glass and SiC on mechanical properties of hybrid laminated composites
- 29 May 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (6) , 066010
The organic HTL in highly efficient germanium-alloyed CsSnI3 perovskite solar cell: a modelling and computational analysis
It is usually anticipated that perovskites will be an appealing material for extremely effective solar cells. However, its practical applications are constrained by its hazardous properties and stability. Thus, CsSn0.5Ge0.5I3, a more environmentally benign substitute for toxic lead-based perovskites, provides superior stability in solar cells. This work reports on the numerical modeling and computational analysis of a heterostructure CsSn0.5Ge0.5I3, with TiO2 and D-PBTTT-14 serving as the electron and hole transport layers, respectively. The introduction of D-PBTTT-14 as a hole transport layer was motivated by its superior stability over existing organic HTLs. Furthermore, the higher electron–hole pair generation rate and very favorable absorption coefficients of each layers manifested improved efficiency. Various parameters were examined to enhance the newly designed solar cell performance such as: thickness, defect density, doping density, coefficient of radiative recombination, defect at interface, shunt and series resistance, front and back contacts, and operating temperature. Perovskite solar cells with their current architecture have the potential to achieve a current density (Jsc) of 28.31 mA cm−2, an open-circuit voltage (Voc) of 1.24 V, a fill factor (FF) of 85.90%, and efficiency of 30.27%.
- 29 May 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (6) , 066010
The organic HTL in highly efficient germanium-alloyed CsSnI3 perovskite solar cell: a modelling and computational analysis
It is usually anticipated that perovskites will be an appealing material for extremely effective solar cells. However, its practical applications are constrained by its hazardous properties and stability. Thus, CsSn0.5Ge0.5I3, a more environmentally benign substitute for toxic lead-based perovskites, provides superior stability in solar cells. This work reports on the numerical modeling and computational analysis of a heterostructure CsSn0.5Ge0.5I3, with TiO2 and D-PBTTT-14 serving as the electron and hole transport layers, respectively. The introduction of D-PBTTT-14 as a hole transport layer was motivated by its superior stability over existing organic HTLs. Furthermore, the higher electron–hole pair generation rate and very favorable absorption coefficients of each layers manifested improved efficiency. Various parameters were examined to enhance the newly designed solar cell performance such as: thickness, defect density, doping density, coefficient of radiative recombination, defect at interface, shunt and series resistance, front and back contacts, and operating temperature. Perovskite solar cells with their current architecture have the potential to achieve a current density (Jsc) of 28.31 mA cm−2, an open-circuit voltage (Voc) of 1.24 V, a fill factor (FF) of 85.90%, and efficiency of 30.27%.
- 1 December 2019
- Published by Elsevier in Chemical Engineering Science
- Vol. 209
Bend pressure drop in horizontal and vertical dilute phase pneumatic conveying systems
- 1 December 2019
- Published by Elsevier in Chemical Engineering Science
- Vol. 209
Bend pressure drop in horizontal and vertical dilute phase pneumatic conveying systems
- 1 November 2019
- Published by Elsevier in Powder Technology
- Vol. 356, 808-817
Particle velocity reduction in horizontal-horizontal bends of dilute phase pneumatic conveying
- 1 November 2019
- Published by Elsevier in Powder Technology
- Vol. 356, 808-817
Particle velocity reduction in horizontal-horizontal bends of dilute phase pneumatic conveying