Saif Ullah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Saif Ullah has a total of 127 co-authors. Here are the top co-authors by number of shared publications:
- Timo Thonhauser
Department of Physics and Center for Functional Materials, Wake Forest University, Winston-Salem, USA
23 shared publications - Jing Li
Department of Chemistry and Chemical Biology, Rutgers University, Piscataway, New Jersey 08854, USA
19 shared publications Fernando Sato
17 shared publications- Kui Tan
Department of Chemistry, University of North Texas, 1508 W Mulberry St, Denton, Texas 76201, United States
11 shared publications - Hao Wang
Hoffmann Institute of Advanced Materials Shenzhen Polytechnic University Shenzhen China
9 shared publications - Pablo A. Denis
Computational Nanotechnology, DETEMA, Facultad de Química, UDELAR, CC 1157, 11800 Montevideo, Uruguay
9 shared publications
Latest Publications
- Open Access
- 27 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Graphene-inspired porous polymer network for ethane/ethylene separation and methane purification
C2H4 and CH4 are essential for industrial applications. However, contamination with other natural gases is a challenge to their utilization. Although several sorbents have been investigated, their performance remains limited. This study introduces graphene-inspired, PPN-20, a porous polymer network (PPN) capable of separating C2H6/C2H4 and purifying CH4 from a C3H8/C2H6/CH4 mixture in a single step. The ultra-microporosity of PPN-20 enables preferential C-H···π interactions with C2H6 and C3H8. As a result, PPN-20 exhibits a C2H6 and C3H8 uptake of 3.93 mmol/g and 5.98 mmol/g, respectively, at 298 K and 1 bar, representing the highest reported for any PPN. It achieves ideal adsorbed solution theory (IAST) selectivities of 2.2 for C2H6/C2H4, 368.2 for C2H6/CH4, 40.14 for C3H8/C2H6, and 294,336 for C3H8/CH4. This selectivity, to the best of our knowledge, is the highest reported for any PPN in the case of C2H6/C2H4 separation and for any sorbent in the cases of C2H6/CH4, C3H8/C2H6, and C3H8/CH4 separation. Robustness tests, including breakthrough experiments, IAST calculations, etc., demonstrate the reliability of PPN-20. Its exceptional performance is attributed to precisely engineered pore sizes that enhance the trapping of guest molecules. These results will pave the way for the design of PPNs for short-chain hydrocarbon purification.
- 27 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessGraphene-inspired porous polymer network for ethane/ethylene separation and methane purification
C2H4 and CH4 are essential for industrial applications. However, contamination with other natural gases is a challenge to their utilization. Although several sorbents have been investigated, their performance remains limited. This study introduces graphene-inspired, PPN-20, a porous polymer network (PPN) capable of separating C2H6/C2H4 and purifying CH4 from a C3H8/C2H6/CH4 mixture in a single step. The ultra-microporosity of PPN-20 enables preferential C-H···π interactions with C2H6 and C3H8. As a result, PPN-20 exhibits a C2H6 and C3H8 uptake of 3.93 mmol/g and 5.98 mmol/g, respectively, at 298 K and 1 bar, representing the highest reported for any PPN. It achieves ideal adsorbed solution theory (IAST) selectivities of 2.2 for C2H6/C2H4, 368.2 for C2H6/CH4, 40.14 for C3H8/C2H6, and 294,336 for C3H8/CH4. This selectivity, to the best of our knowledge, is the highest reported for any PPN in the case of C2H6/C2H4 separation and for any sorbent in the cases of C2H6/CH4, C3H8/C2H6, and C3H8/CH4 separation. Robustness tests, including breakthrough experiments, IAST calculations, etc., demonstrate the reliability of PPN-20. Its exceptional performance is attributed to precisely engineered pore sizes that enhance the trapping of guest molecules. These results will pave the way for the design of PPNs for short-chain hydrocarbon purification.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 7 (15) , 7671-7677
Small gas-molecule adsorption and separation in a hydrogen-bonded organic framework
Recent years have seen a surge of interest in hydrogen-bonded organic framework (HOF) materials-with a particular focus on small gas-molecule separation-due to their pore tunability, reversibility, and specificity. Recently, a...
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 7 (15) , 7671-7677
Open AccessSmall gas-molecule adsorption and separation in a hydrogen-bonded organic framework
Recent years have seen a surge of interest in hydrogen-bonded organic framework (HOF) materials-with a particular focus on small gas-molecule separation-due to their pore tunability, reversibility, and specificity. Recently, a...
- Open Access
- 18 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (36) , 30661-30668
Electron-correlation driven structural instability and adsorption mechanism in the metal–organic framework NU2100
Electron-correlation driven structural instability reveals mechanism of remarkable adsorption and seperation profiles observed experimentally.
- 18 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (36) , 30661-30668
Open AccessElectron-correlation driven structural instability and adsorption mechanism in the metal–organic framework NU2100
Electron-correlation driven structural instability reveals mechanism of remarkable adsorption and seperation profiles observed experimentally.
- 7 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Carbon Dioxide Capture by a Hydrothermally Synthesized Water-Resistant Zinc-Oxalate-Aminotriazolate Framework
Selective capture of carbon dioxide (CO2) from flue gas employing physisorbents represents an appealing approach owing to its potentially low energy penalty and cost-effectiveness. Microporous metal-organic frameworks (MOFs), characterized by their highly customizable pore structure and functionality, offer significant promise in this field. However, challenges such as thermal/moisture resistance, green/scalable synthesis, and adsorption durability remain unresolved. Here, we demonstrate the effective capture of CO2 from flue gas using a microporous zinc-oxalate-aminotriazolate (Zn-OX-ATZ) framework material. Zn-OX-ATZ is synthesized directly in water from zinc oxalate and 3-amino-1,2,4-trazole, achieving high atom economy. It displays a CO2 adsorption capacity of 2.29 mmol g-1 at 318 K and 0.15 bar, with a CO2/N2 selectivity exceeding 78000. Notably, its structural integrity and CO2 adsorption capability are fully maintained under highly humid conditions, as evidenced by over 50 adsorption-desorption cycles. The practical applicability of Zn-OX-ATZ for industrial CO2 capture has been experimentally validated using simulated flue gas at the kilogram scale. Additionally, we have elucidated the underlying mechanism and adsorption domains of CO2 in the presence of H2O at the molecular level through a combination of gas-loaded single-crystal X-ray diffraction, in situ infrared spectroscopy, and ab initio modeling. This study presents a durable physisorbent for CO2 capture, characterized by well-balanced adsorption capacity and selectivity, high water stability and resistance, green preparation, and, therefore, strong practical applicability.
- 7 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Carbon Dioxide Capture by a Hydrothermally Synthesized Water-Resistant Zinc-Oxalate-Aminotriazolate Framework
Selective capture of carbon dioxide (CO2) from flue gas employing physisorbents represents an appealing approach owing to its potentially low energy penalty and cost-effectiveness. Microporous metal-organic frameworks (MOFs), characterized by their highly customizable pore structure and functionality, offer significant promise in this field. However, challenges such as thermal/moisture resistance, green/scalable synthesis, and adsorption durability remain unresolved. Here, we demonstrate the effective capture of CO2 from flue gas using a microporous zinc-oxalate-aminotriazolate (Zn-OX-ATZ) framework material. Zn-OX-ATZ is synthesized directly in water from zinc oxalate and 3-amino-1,2,4-trazole, achieving high atom economy. It displays a CO2 adsorption capacity of 2.29 mmol g-1 at 318 K and 0.15 bar, with a CO2/N2 selectivity exceeding 78000. Notably, its structural integrity and CO2 adsorption capability are fully maintained under highly humid conditions, as evidenced by over 50 adsorption-desorption cycles. The practical applicability of Zn-OX-ATZ for industrial CO2 capture has been experimentally validated using simulated flue gas at the kilogram scale. Additionally, we have elucidated the underlying mechanism and adsorption domains of CO2 in the presence of H2O at the molecular level through a combination of gas-loaded single-crystal X-ray diffraction, in situ infrared spectroscopy, and ab initio modeling. This study presents a durable physisorbent for CO2 capture, characterized by well-balanced adsorption capacity and selectivity, high water stability and resistance, green preparation, and, therefore, strong practical applicability.
- 16 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (30) , 26926-26933
Constructing Alkali Metal–Organic Frameworks with High Porosity Utilizing a High-Connectivity Organic Linker
Alkali metal-organic frameworks (AMOFs) hold considerable promise for a broad spectrum of applications, benefiting from their low toxicity and lightweight. However, the construction of AMOFs with permanent porosity remains a significant challenge due to the tendency of alkali metals to coordinate with polar solvents, thereby forming coordination polymers with low dimensionality. Here, we introduce a connectivity-regulated approach for the synthesis of porous AMOFs by using highly connected organic linkers. Following this strategy, we have constructed AMOFs (denoted as HIAM-112-Li/Na/K/Rb/Cs) using the entire group of alkali metals (Li, Na, K, Rb, and Cs) and an octacarboxylate linker. In particular, HIAM-112 K/Rb/Cs demonstrate record-high porosities among K-, Rb-, and Cs-based coordination networks, respectively. By evaluating their separation performance for the selected gas mixtures, we demonstrate that these highly porous AMOFs hold a strong potential in adsorption-related fields.
- 16 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (30) , 26926-26933
Constructing Alkali Metal–Organic Frameworks with High Porosity Utilizing a High-Connectivity Organic Linker
Alkali metal-organic frameworks (AMOFs) hold considerable promise for a broad spectrum of applications, benefiting from their low toxicity and lightweight. However, the construction of AMOFs with permanent porosity remains a significant challenge due to the tendency of alkali metals to coordinate with polar solvents, thereby forming coordination polymers with low dimensionality. Here, we introduce a connectivity-regulated approach for the synthesis of porous AMOFs by using highly connected organic linkers. Following this strategy, we have constructed AMOFs (denoted as HIAM-112-Li/Na/K/Rb/Cs) using the entire group of alkali metals (Li, Na, K, Rb, and Cs) and an octacarboxylate linker. In particular, HIAM-112 K/Rb/Cs demonstrate record-high porosities among K-, Rb-, and Cs-based coordination networks, respectively. By evaluating their separation performance for the selected gas mixtures, we demonstrate that these highly porous AMOFs hold a strong potential in adsorption-related fields.
- Open Access
Effect of Entropic Constraints on the Thermodynamics of Molecular Adsorption in Nano‐Porous Materials
Gas separation is a critical industrial process that consumes a significant amount of energy due to the widely used techniques that are currently employed. Adsorptive materials—such as metal–organic frameworks (MOFs)—show promise as an energy‐efficient alternative. Of particular current interest are novel, temperature‐dependent separation processes in MOFs, such as the recently reported separation of ternary isomeric hydrocarbon mixtures within one and the same material. However, the mechanisms of these highly desirable separations remain poorly understood. Herein, through a combination of ab initio simulations and statistical mechanics, it is shown that the temperature dependence is the result of a constraint on the guest molecule's entropic degrees of freedom when loaded into the MOF, caused by the fortuitous tight fitting of the guest inside the pore. While the framework applies to all molecular adsorption in porous media, it is essential for the description of large molecules in small pores, which is demonstrated here using the separation of C6 isomers in Ca(H 2 tcpb) as a test case. The developed framework and analysis not only reveal the reason why separation occurs but also predict the temperatures at which it takes place, thus opening the door to newly designed MOFs with tailor‐made precision.
Open AccessEffect of Entropic Constraints on the Thermodynamics of Molecular Adsorption in Nano‐Porous Materials
Gas separation is a critical industrial process that consumes a significant amount of energy due to the widely used techniques that are currently employed. Adsorptive materials—such as metal–organic frameworks (MOFs)—show promise as an energy‐efficient alternative. Of particular current interest are novel, temperature‐dependent separation processes in MOFs, such as the recently reported separation of ternary isomeric hydrocarbon mixtures within one and the same material. However, the mechanisms of these highly desirable separations remain poorly understood. Herein, through a combination of ab initio simulations and statistical mechanics, it is shown that the temperature dependence is the result of a constraint on the guest molecule's entropic degrees of freedom when loaded into the MOF, caused by the fortuitous tight fitting of the guest inside the pore. While the framework applies to all molecular adsorption in porous media, it is essential for the description of large molecules in small pores, which is demonstrated here using the separation of C6 isomers in Ca(H 2 tcpb) as a test case. The developed framework and analysis not only reveal the reason why separation occurs but also predict the temperatures at which it takes place, thus opening the door to newly designed MOFs with tailor‐made precision.
- 6 November 2024
- Published by Elsevier in Applied Materials Today
- Vol. 41
Optoelectronic properties of novel layered materials under encapsulation: 2D Copper Iodide and Silver Iodide
- 6 November 2024
- Published by Elsevier in Applied Materials Today
- Vol. 41
Optoelectronic properties of novel layered materials under encapsulation: 2D Copper Iodide and Silver Iodide
- Open Access
- 31 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (46) , 32385-32395
Enhancing carbon dioxide capture under humid conditions by optimizing the pore surface structure
Enhancing carbon dioxide capture by tuning ligand conjugation that leads to increased hydrophobicity, smaller pore size, higher CO2 uptake amount and reduced competitive H2O adsorption.
- 31 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (46) , 32385-32395
Open AccessEnhancing carbon dioxide capture under humid conditions by optimizing the pore surface structure
Enhancing carbon dioxide capture by tuning ligand conjugation that leads to increased hydrophobicity, smaller pore size, higher CO2 uptake amount and reduced competitive H2O adsorption.
- 10 September 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (37) , 15542-15548
Flexible MOFs as Pressure-Tunable Filters for Hydrocarbon Separation
- 10 September 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (37) , 15542-15548
Flexible MOFs as Pressure-Tunable Filters for Hydrocarbon Separation
- 26 June 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (26) , 10982-10996
THD-C Sheet: A Novel Nonbenzenoid Carbon Allotrope with Tetra-, Hexa-, and Dodeca-Membered Rings
- 26 June 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (26) , 10982-10996
THD-C Sheet: A Novel Nonbenzenoid Carbon Allotrope with Tetra-, Hexa-, and Dodeca-Membered Rings