Eleanore D. Sternberg
Research Subjects
Research Interests
Eleanore D. Sternberg has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Matthew B. Thomas
Department of Entomology, Center for Infectious Disease Dynamics, the Pennsylvania State University, University Park, USA
5 shared publications Matthew B. Thomas
Department of Entomology and Center for Infectious Disease Dynamics, The Pennsylvania State University, University Park, 16802, PA, USA
3 shared publicationsA. Alphonsine Koffi
Institut Pierre Richet (IPR) / Institut National de Santé Publique (INSP), Bouaké, Côte d'Ivoire
2 shared publications- Albert Kilian
Tropical Health LLP, London, United Kingdom
2 shared publications - Bart G. J. Knols
In2Care BV, Marijkeweg 22, 6709 PG, Wageningen, The Netherlands
2 shared publications - Christen Fornadel
Innovative Vector Control Consortium (IVCC), Liverpool, United Kingdom
2 shared publications
Latest Publications
- Open Access
Predicting the median lifespan of ITNs using an area-measure of risk of physical durability: proof of concept of the Risk Index
Background: The lifespan of insecticide-treated nets (ITNs) varies widely across settings, reflecting both intrinsic product characteristics and external factors related to use, care, and environment. While the resistance to damage (RD) score captures intrinsic product durability, there is no standardized metric to quantify contextual risks. This study presents a proof of concept for the Risk Index (RI), a composite measure of site-level risk factors for ITN physical durability and survival. Methods: We conducted a secondary analysis of durability monitoring data from 44 sites across 15 countries in sub-Saharan Africa, covering 14 ITN products. The RI was calculated as a weighted composite of 12 indicators spanning net handling, net care attitudes, and use environment. Associations between RI and median ITN survival were assessed using weighted linear regression and multivariable mixed-effects models adjusting for RD score, with country included as a random effect. Results: RI scores ranged from 25.1 to 83.7 across study sites. In bivariable analysis, a 10-point decrease in RI was associated with a 4.0-month increase in median ITN survival (95% CI: 1.7–6.3; p=0.001). In multivariable analysis adjusting for RD, this association remained significant but attenuated to 2.2 months (95% CI: 0.1–4.2; p=0.037). Independently, a 10-point increase in RD score was associated with a 3.5-month increase in survival (95% CI: 1.3–5.7; p=0.001). No interaction was observed between RI and RD. Predicted survival differed by approximately one year between the lowest- and highest-risk settings. Conclusion: The RI provides a standardized measure of contextual risk factors affecting ITN lifespan, independent of ITN product type. When used alongside a product’s RD score, the RI enables improved interpretation of expected site-level variation in net performance. This combined framework offers a practical basis for incorporating behavioural and environmental risk into vector control planning and for tailoring ITN strategies to local conditions.
Open AccessPredicting the median lifespan of ITNs using an area-measure of risk of physical durability: proof of concept of the Risk Index
Background: The lifespan of insecticide-treated nets (ITNs) varies widely across settings, reflecting both intrinsic product characteristics and external factors related to use, care, and environment. While the resistance to damage (RD) score captures intrinsic product durability, there is no standardized metric to quantify contextual risks. This study presents a proof of concept for the Risk Index (RI), a composite measure of site-level risk factors for ITN physical durability and survival. Methods: We conducted a secondary analysis of durability monitoring data from 44 sites across 15 countries in sub-Saharan Africa, covering 14 ITN products. The RI was calculated as a weighted composite of 12 indicators spanning net handling, net care attitudes, and use environment. Associations between RI and median ITN survival were assessed using weighted linear regression and multivariable mixed-effects models adjusting for RD score, with country included as a random effect. Results: RI scores ranged from 25.1 to 83.7 across study sites. In bivariable analysis, a 10-point decrease in RI was associated with a 4.0-month increase in median ITN survival (95% CI: 1.7–6.3; p=0.001). In multivariable analysis adjusting for RD, this association remained significant but attenuated to 2.2 months (95% CI: 0.1–4.2; p=0.037). Independently, a 10-point increase in RD score was associated with a 3.5-month increase in survival (95% CI: 1.3–5.7; p=0.001). No interaction was observed between RI and RD. Predicted survival differed by approximately one year between the lowest- and highest-risk settings. Conclusion: The RI provides a standardized measure of contextual risk factors affecting ITN lifespan, independent of ITN product type. When used alongside a product’s RD score, the RI enables improved interpretation of expected site-level variation in net performance. This combined framework offers a practical basis for incorporating behavioural and environmental risk into vector control planning and for tailoring ITN strategies to local conditions.
- Open Access
Refining the resistance-to-damage (RD) score to predict operational Insecticide-Treated Net lifespan and identify paths to innovation
Background: Insecticide Treated Nets (ITNs) vary greatly in their physical characteristics yet the relationship with field durability remains poorly understood. To address this, we refined the existing resistance-to-damage (RD) metric for greater predictive power in estimating operational lifespan and to identify key avenues of innovation. Methods: The original resistance-to-damage (oRD) score was calculated by comparing four physical attributes; snag strength, bursting strength, hole enlargement resistance and abrasion resistance; against aspirational values previously determined to provide resistance to routine damage. Here, the weighting of each is improved to provide a better prediction of field life, resulting in a weighted resistance-to-damage (wRD) score. Durability data from 37 field sites (across 14 countries) involving 10,000 campaign ITNs was used to quantify the relationship between physical characteristics and field life. Bivariable linear regression models were used to assess the correlation between RD scores and ITN survival time. A Cox regression survival analysis was applied to examine the impact of the RD score on physical survival, adjusting for net care and environment variables (Risk Index), evaluating the risk of ITN failure from the time they were first hung. Results: The bivariate analysis, not adjusting for differences between sites, shows that the wRD was a better predictor for net lifespan than oRD (wRD r 2 = 0.07 oRD r 2 = 0.01). In the multivariate analysis, adjusting for risk index, the wRD model was able to explain more than 70% of variability in net survival (wRD r 2 = 0.74). Consequently, when comparing nets with different wRD scores in the same site, a 10-point increase in wRD score was associated with a 3.9-month gain in median survival ( p =0.016). Increasing wRD from 35 to 70, the range of current products, increases median field life by 13.65 months (95% CI: 3.03–24.16). An ITN product with an wRD score of 68 is associated with a median lifespan of 2.7 years. The increase in predictive power of the wRD score came primarily from increasing the weighting of the hole enlargement resistance variable, which is a strong differentiator between ITN products. In contrast, abrasion-resistance was a negligible contributor to predictive power. Discussion: The wRD score more accurately predicts ITN survival in the field than the oRD score. These findings highlight that resistance to hole enlargement is the primary differentiating factor in predicting field life, with some products performing far better than others. Snag and bursting strength remain essential characteristics yet are similarly low compared to aspirational values across available ITN products. All ITNs WHO prequalified in 2020 perform poorly on snag strength, indicating this as a core bottleneck in achieving longer operational ITN lifespan. Consequently, resistance to snagging and hole enlargement should be keys targets for future innovation to enhance the physical durability of ITNs.
Open AccessRefining the resistance-to-damage (RD) score to predict operational Insecticide-Treated Net lifespan and identify paths to innovation
Background: Insecticide Treated Nets (ITNs) vary greatly in their physical characteristics yet the relationship with field durability remains poorly understood. To address this, we refined the existing resistance-to-damage (RD) metric for greater predictive power in estimating operational lifespan and to identify key avenues of innovation. Methods: The original resistance-to-damage (oRD) score was calculated by comparing four physical attributes; snag strength, bursting strength, hole enlargement resistance and abrasion resistance; against aspirational values previously determined to provide resistance to routine damage. Here, the weighting of each is improved to provide a better prediction of field life, resulting in a weighted resistance-to-damage (wRD) score. Durability data from 37 field sites (across 14 countries) involving 10,000 campaign ITNs was used to quantify the relationship between physical characteristics and field life. Bivariable linear regression models were used to assess the correlation between RD scores and ITN survival time. A Cox regression survival analysis was applied to examine the impact of the RD score on physical survival, adjusting for net care and environment variables (Risk Index), evaluating the risk of ITN failure from the time they were first hung. Results: The bivariate analysis, not adjusting for differences between sites, shows that the wRD was a better predictor for net lifespan than oRD (wRD r 2 = 0.07 oRD r 2 = 0.01). In the multivariate analysis, adjusting for risk index, the wRD model was able to explain more than 70% of variability in net survival (wRD r 2 = 0.74). Consequently, when comparing nets with different wRD scores in the same site, a 10-point increase in wRD score was associated with a 3.9-month gain in median survival ( p =0.016). Increasing wRD from 35 to 70, the range of current products, increases median field life by 13.65 months (95% CI: 3.03–24.16). An ITN product with an wRD score of 68 is associated with a median lifespan of 2.7 years. The increase in predictive power of the wRD score came primarily from increasing the weighting of the hole enlargement resistance variable, which is a strong differentiator between ITN products. In contrast, abrasion-resistance was a negligible contributor to predictive power. Discussion: The wRD score more accurately predicts ITN survival in the field than the oRD score. These findings highlight that resistance to hole enlargement is the primary differentiating factor in predicting field life, with some products performing far better than others. Snag and bursting strength remain essential characteristics yet are similarly low compared to aspirational values across available ITN products. All ITNs WHO prequalified in 2020 perform poorly on snag strength, indicating this as a core bottleneck in achieving longer operational ITN lifespan. Consequently, resistance to snagging and hole enlargement should be keys targets for future innovation to enhance the physical durability of ITNs.
- Open Access
- 15 November 2021
- Published by Public Library of Science (PLoS) in PLOS Global Public Health
- Vol. 1 (11) , e0000030
Spatial targeting of Screening + Eave tubes (SET), a house-based malaria control intervention, in Côte d’Ivoire: A geostatistical modelling study
New malaria control tools and tailoring interventions to local contexts are needed to reduce the malaria burden and meet global goals. The housing modification, screening plus a targeted house-based insecticide delivery system called the In2Care® Eave Tubes, has been shown to reduce clinical malaria in a large cluster randomised controlled trial. However, the widescale suitability of this approach is unknown. We aimed to predict household suitability and define the most appropriate locations for ground-truthing where Screening + Eave Tubes (SET) could be implemented across Côte d’Ivoire. We classified DHS sampled households into suitable for SET based on the walls and roof materials. We fitted a Bayesian beta-binomial logistic model using the integrated nested Laplace approximation (INLA) to predict suitability of SET and to define priority locations for ground-truthing and to calculate the potential population coverage and costs. Based on currently available data on house type and malaria infection rate, 31% of the total population and 17.5% of the population in areas of high malaria transmission live in areas suitable for SET. The estimated cost of implementing SET in suitable high malaria transmission areas would be $46m ($13m –$108m). Ground-truthing and more studies should be conducted to evaluate the efficacy and feasibility of SET in these settings. The study provides an example of implementing strategies to reflect local socio-economic and epidemiological factors, and move beyond blanket, one-size-fits-all strategies.
- 15 November 2021
- Published by Public Library of Science (PLoS) in PLOS Global Public Health
- Vol. 1 (11) , e0000030
Open AccessSpatial targeting of Screening + Eave tubes (SET), a house-based malaria control intervention, in Côte d’Ivoire: A geostatistical modelling study
New malaria control tools and tailoring interventions to local contexts are needed to reduce the malaria burden and meet global goals. The housing modification, screening plus a targeted house-based insecticide delivery system called the In2Care® Eave Tubes, has been shown to reduce clinical malaria in a large cluster randomised controlled trial. However, the widescale suitability of this approach is unknown. We aimed to predict household suitability and define the most appropriate locations for ground-truthing where Screening + Eave Tubes (SET) could be implemented across Côte d’Ivoire. We classified DHS sampled households into suitable for SET based on the walls and roof materials. We fitted a Bayesian beta-binomial logistic model using the integrated nested Laplace approximation (INLA) to predict suitability of SET and to define priority locations for ground-truthing and to calculate the potential population coverage and costs. Based on currently available data on house type and malaria infection rate, 31% of the total population and 17.5% of the population in areas of high malaria transmission live in areas suitable for SET. The estimated cost of implementing SET in suitable high malaria transmission areas would be $46m ($13m –$108m). Ground-truthing and more studies should be conducted to evaluate the efficacy and feasibility of SET in these settings. The study provides an example of implementing strategies to reflect local socio-economic and epidemiological factors, and move beyond blanket, one-size-fits-all strategies.
- Open Access
- 1 November 2021
- Published by Wiley in Journal of Environmental and Public Health
- Vol. 2021, 1-14
Technical Workflow Development for Integrating Drone Surveys and Entomological Sampling to Characterise Aquatic Larval Habitats of Anopheles funestus in Agricultural Landscapes in Côte d’Ivoire
Land-use practices such as agriculture can impact mosquito vector breeding ecology, resulting in changes in disease transmission. The typical breeding habitats of Africas second most important malaria vector Anopheles funestus are large, semipermanent water bodies, which make them potential candidates for targeted larval source management. This is a technical workflow for the integration of drone surveys and mosquito larval sampling, designed for a case study aiming to characterise An. funestus breeding sites near two villages in an agricultural setting in Côte dIvoire. Using satellite remote sensing data, we developed an environmentally and spatially representative sampling frame and conducted paired mosquito larvae and drone mapping surveys from June to August 2021. To categorise the drone imagery, we also developed a land cover classification scheme with classes relative to An. funestus breeding ecology. We sampled 189 potential breeding habitats, of which 119 (63) were positive for the Anopheles genus and nine (4.8) were positive for An. funestus. We mapped 30.42km2 of the region of interest including all water bodies which were sampled for larvae. These data can be used to inform targeted vector control efforts, although its generalisability over a large region is limited by the fine-scale nature of this study area. This paper develops protocols for integrating drone surveys and statistically rigorous entomological sampling, which can be adjusted to collect data on vector breeding habitats in other ecological contexts. Further research using data collected in this study can enable the development of deep-learning algorithms for identifying An. funestus breeding habitats across rural agricultural landscapes in Côte dIvoire and the analysis of risk factors for these sites.
- 1 November 2021
- Published by Wiley in Journal of Environmental and Public Health
- Vol. 2021, 1-14
Open AccessTechnical Workflow Development for Integrating Drone Surveys and Entomological Sampling to Characterise Aquatic Larval Habitats of Anopheles funestus in Agricultural Landscapes in Côte d’Ivoire
Land-use practices such as agriculture can impact mosquito vector breeding ecology, resulting in changes in disease transmission. The typical breeding habitats of Africas second most important malaria vector Anopheles funestus are large, semipermanent water bodies, which make them potential candidates for targeted larval source management. This is a technical workflow for the integration of drone surveys and mosquito larval sampling, designed for a case study aiming to characterise An. funestus breeding sites near two villages in an agricultural setting in Côte dIvoire. Using satellite remote sensing data, we developed an environmentally and spatially representative sampling frame and conducted paired mosquito larvae and drone mapping surveys from June to August 2021. To categorise the drone imagery, we also developed a land cover classification scheme with classes relative to An. funestus breeding ecology. We sampled 189 potential breeding habitats, of which 119 (63) were positive for the Anopheles genus and nine (4.8) were positive for An. funestus. We mapped 30.42km2 of the region of interest including all water bodies which were sampled for larvae. These data can be used to inform targeted vector control efforts, although its generalisability over a large region is limited by the fine-scale nature of this study area. This paper develops protocols for integrating drone surveys and statistically rigorous entomological sampling, which can be adjusted to collect data on vector breeding habitats in other ecological contexts. Further research using data collected in this study can enable the development of deep-learning algorithms for identifying An. funestus breeding habitats across rural agricultural landscapes in Côte dIvoire and the analysis of risk factors for these sites.
- Open Access
- 18 July 2018
- Published by Springer Nature in BMC Public Health
- Vol. 18 (1) , 1-13
Evaluating the impact of screening plus eave tubes on malaria transmission compared to current best practice in central Côte d’Ivoire: a two armed cluster randomized controlled trial
Access to long-lasting insecticidal nets (LLINs) has increased and malaria has decreased globally, but malaria transmission remains high in parts of sub-Saharan Africa and insecticide resistance threatens current progress. Eave tubes are a new tool for the targeted delivery of insecticides against mosquitoes attempting to enter houses. The primary objective of this trial is to test whether screening plus eave tubes (SET) provides protection against malaria, on top of universal coverage with LLINs in an area of intense pyrethroid resistance. The trial will also assess acceptability and cost-effectiveness of the intervention. A two-armed, cluster randomized controlled trial will be conducted to evaluate the effect of SET on clinical malaria incidence in children living in central Côte d’Ivoire. Forty villages will be selected based on population size and the proportion of houses suitable for modification with SET. Using restricted randomization, half the villages will be assigned to the treatment arm (SET + LLINs) and the remainder will be assigned to the control arm (LLINs only). In both arms, LLINs will be distributed and in the treatment arm, householders will be offered SET. Fifty children aged six months to eight years old will be enrolled from randomly selected households in each of the 40 villages. Cohorts will be cleared of malaria parasites at the start of the study and one year after recruitment, and will be monitored for clinical malaria case incidence by active case detection over two years. Mosquito densities will be assessed using CDC light traps and human landing catches and a subset of Anopheles mosquitoes will be examined for parity status and tested for sporozoite infection. Acceptability of SET will be monitored using surveys and focus groups. Cost-effectiveness analysis will measure the incremental cost per case averted and per disability-adjusted life year (DALY) averted of adding SET to LLINs. Economic and financial costs will be estimated from societal and provider perspective using standard economic evaluation methods. This study will be the first evaluation of the epidemiological impact of SET. Trial findings will show whether SET is a viable, cost-effective technology for malaria control in Côte d’Ivoire and possibly elsewhere. ISRCTN18145556 , registered on 01 February 2017 – retrospectively registered.
- 18 July 2018
- Published by Springer Nature in BMC Public Health
- Vol. 18 (1) , 1-13
Open AccessEvaluating the impact of screening plus eave tubes on malaria transmission compared to current best practice in central Côte d’Ivoire: a two armed cluster randomized controlled trial
Access to long-lasting insecticidal nets (LLINs) has increased and malaria has decreased globally, but malaria transmission remains high in parts of sub-Saharan Africa and insecticide resistance threatens current progress. Eave tubes are a new tool for the targeted delivery of insecticides against mosquitoes attempting to enter houses. The primary objective of this trial is to test whether screening plus eave tubes (SET) provides protection against malaria, on top of universal coverage with LLINs in an area of intense pyrethroid resistance. The trial will also assess acceptability and cost-effectiveness of the intervention. A two-armed, cluster randomized controlled trial will be conducted to evaluate the effect of SET on clinical malaria incidence in children living in central Côte d’Ivoire. Forty villages will be selected based on population size and the proportion of houses suitable for modification with SET. Using restricted randomization, half the villages will be assigned to the treatment arm (SET + LLINs) and the remainder will be assigned to the control arm (LLINs only). In both arms, LLINs will be distributed and in the treatment arm, householders will be offered SET. Fifty children aged six months to eight years old will be enrolled from randomly selected households in each of the 40 villages. Cohorts will be cleared of malaria parasites at the start of the study and one year after recruitment, and will be monitored for clinical malaria case incidence by active case detection over two years. Mosquito densities will be assessed using CDC light traps and human landing catches and a subset of Anopheles mosquitoes will be examined for parity status and tested for sporozoite infection. Acceptability of SET will be monitored using surveys and focus groups. Cost-effectiveness analysis will measure the incremental cost per case averted and per disability-adjusted life year (DALY) averted of adding SET to LLINs. Economic and financial costs will be estimated from societal and provider perspective using standard economic evaluation methods. This study will be the first evaluation of the epidemiological impact of SET. Trial findings will show whether SET is a viable, cost-effective technology for malaria control in Côte d’Ivoire and possibly elsewhere. ISRCTN18145556 , registered on 01 February 2017 – retrospectively registered.
- Open Access
- 7 November 2017
- Published by Wiley in Evolutionary Applications
- Vol. 11 (4) , 431-441
Empirical and theoretical investigation into the potential impacts of insecticide resistance on the effectiveness of insecticide‐treated bed nets
In spite of widespread insecticide resistance in vector mosquitoes throughout Africa, there is limited evidence that long‐lasting insecticidal bed nets (LLINs) are failing to protect against malaria. Here, we showed that LLIN contact in the course of host‐seeking resulted in higher mortality of resistant Anopheles spp. mosquitoes than predicted from standard laboratory exposures with the same net. We also found that sublethal contact with an LLIN caused a reduction in blood feeding and subsequent host‐seeking success in multiple lines of resistant mosquitoes from the laboratory and the field. Using a transmission model, we showed that when these LLIN‐related lethal and sublethal effects were accrued over mosquito lifetimes, they greatly reduced the impact of resistance on malaria transmission potential under conditions of high net coverage. If coverage falls, the epidemiological impact is far more pronounced. Similarly, if the intensity of resistance intensifies, the loss of malaria control increases nonlinearly. Our findings help explain why insecticide resistance has not yet led to wide‐scale failure of LLINs, but reinforce the call for alternative control tools and informed resistance management strategies.
- 7 November 2017
- Published by Wiley in Evolutionary Applications
- Vol. 11 (4) , 431-441
Open AccessEmpirical and theoretical investigation into the potential impacts of insecticide resistance on the effectiveness of insecticide‐treated bed nets
In spite of widespread insecticide resistance in vector mosquitoes throughout Africa, there is limited evidence that long‐lasting insecticidal bed nets (LLINs) are failing to protect against malaria. Here, we showed that LLIN contact in the course of host‐seeking resulted in higher mortality of resistant Anopheles spp. mosquitoes than predicted from standard laboratory exposures with the same net. We also found that sublethal contact with an LLIN caused a reduction in blood feeding and subsequent host‐seeking success in multiple lines of resistant mosquitoes from the laboratory and the field. Using a transmission model, we showed that when these LLIN‐related lethal and sublethal effects were accrued over mosquito lifetimes, they greatly reduced the impact of resistance on malaria transmission potential under conditions of high net coverage. If coverage falls, the epidemiological impact is far more pronounced. Similarly, if the intensity of resistance intensifies, the loss of malaria control increases nonlinearly. Our findings help explain why insecticide resistance has not yet led to wide‐scale failure of LLINs, but reinforce the call for alternative control tools and informed resistance management strategies.
- Open Access
- 29 June 2017
- Published by Wiley in Evolutionary Applications
- Vol. 11 (4) , 404-414
Insights from agriculture for the management of insecticide resistance in disease vectors
Key to contemporary management of diseases such as malaria, dengue, and filariasis is control of the insect vectors responsible for transmission. Insecticide‐based interventions have contributed to declines in disease burdens in many areas, but this progress could be threatened by the emergence of insecticide resistance in vector populations. Insecticide resistance is likewise a major concern in agriculture, where insect pests can cause substantial yield losses. Here, we explore overlaps between understanding and managing insecticide resistance in agriculture and in public health. We have used the Global Plan for Insecticide Resistance Management in malaria vectors, developed under the auspices of the World Health Organization Global Malaria Program, as a framework for this exploration because it serves as one of the few cohesive documents for managing a global insecticide resistance crisis. Generally, this comparison highlights some fundamental differences between insect control in agriculture and in public health. Moreover, we emphasize that the success of insecticide resistance management strategies is strongly dependent on the biological specifics of each system. We suggest that the biological, operational, and regulatory differences between agriculture and public health limit the wholesale transfer of knowledge and practices from one system to the other. Nonetheless, there are some valuable insights from agriculture that could assist in advancing the existing Global Plan for Insecticide Resistance Management framework.
- 29 June 2017
- Published by Wiley in Evolutionary Applications
- Vol. 11 (4) , 404-414
Open AccessInsights from agriculture for the management of insecticide resistance in disease vectors
Key to contemporary management of diseases such as malaria, dengue, and filariasis is control of the insect vectors responsible for transmission. Insecticide‐based interventions have contributed to declines in disease burdens in many areas, but this progress could be threatened by the emergence of insecticide resistance in vector populations. Insecticide resistance is likewise a major concern in agriculture, where insect pests can cause substantial yield losses. Here, we explore overlaps between understanding and managing insecticide resistance in agriculture and in public health. We have used the Global Plan for Insecticide Resistance Management in malaria vectors, developed under the auspices of the World Health Organization Global Malaria Program, as a framework for this exploration because it serves as one of the few cohesive documents for managing a global insecticide resistance crisis. Generally, this comparison highlights some fundamental differences between insect control in agriculture and in public health. Moreover, we emphasize that the success of insecticide resistance management strategies is strongly dependent on the biological specifics of each system. We suggest that the biological, operational, and regulatory differences between agriculture and public health limit the wholesale transfer of knowledge and practices from one system to the other. Nonetheless, there are some valuable insights from agriculture that could assist in advancing the existing Global Plan for Insecticide Resistance Management framework.
- Open Access
- 1 September 2016
- Published by Springer Nature in Malaria Journal
- Vol. 15 (1) , 1-11
Eave tubes for malaria control in Africa: initial development and semi-field evaluations in Tanzania
Presented here are a series of preliminary experiments evaluating “eave tubes”—a technology that combines house screening with a novel method of delivering insecticides for control of malaria mosquitoes. Eave tubes were first evaluated with overnight release and recapture of mosquitoes in a screened compartment containing a hut and human sleeper. Recapture numbers were used as a proxy for overnight survival. These trials tested physical characteristics of the eave tubes (height, diameter, angle), and different active ingredients (bendiocarb, LLIN material, fungus). Eave tubes in a hut with closed eaves were also compared to an LLIN protecting a sleeper in a hut with open eaves. Eave tubes were then evaluated in a larger compartment containing a self-replicating mosquito population, vegetation, and multiple houses and cattle sheds. In this “model village”, LLINs were introduced first, followed by eave tubes and associated house modifications. Initial testing suggested that tubes placed horizontally and at eave height had the biggest impact on mosquito recapture relative to respective controls. Comparison of active ingredients suggested roughly equivalent effects from bendiocarb, LLIN material, and fungal spores (although speed of kill was slower for fungus). The impact of treated netting on recapture rates ranged from 50 to 70 % reduction relative to controls. In subsequent experiments comparing bendiocarb-treated netting in eave tubes against a standard LLIN, the effect size was smaller but the eave tubes with closed eaves performed at least as well as the LLIN with open eaves. In the model village, introducing LLINs led to an approximate 60 % reduction in larval densities and 85 % reduction in indoor catches of host-seeking mosquitoes relative to pre-intervention values. Installing eave tubes and screening further reduced larval density (93 % relative to pre intervention values) and virtually eliminated indoor host-seeking mosquitoes. When the eave tubes and screening were removed, larval and adult catches recovered to pre-eave tube levels. These trials suggest that the “eave tube” package can impact overnight survival of host-seeking mosquitoes and can suppress mosquito populations, even in a complex environment. Further testing is now required to evaluate the robustness of these findings and demonstrate impact under field conditions.
- 1 September 2016
- Published by Springer Nature in Malaria Journal
- Vol. 15 (1) , 1-11
Open AccessEave tubes for malaria control in Africa: initial development and semi-field evaluations in Tanzania
Presented here are a series of preliminary experiments evaluating “eave tubes”—a technology that combines house screening with a novel method of delivering insecticides for control of malaria mosquitoes. Eave tubes were first evaluated with overnight release and recapture of mosquitoes in a screened compartment containing a hut and human sleeper. Recapture numbers were used as a proxy for overnight survival. These trials tested physical characteristics of the eave tubes (height, diameter, angle), and different active ingredients (bendiocarb, LLIN material, fungus). Eave tubes in a hut with closed eaves were also compared to an LLIN protecting a sleeper in a hut with open eaves. Eave tubes were then evaluated in a larger compartment containing a self-replicating mosquito population, vegetation, and multiple houses and cattle sheds. In this “model village”, LLINs were introduced first, followed by eave tubes and associated house modifications. Initial testing suggested that tubes placed horizontally and at eave height had the biggest impact on mosquito recapture relative to respective controls. Comparison of active ingredients suggested roughly equivalent effects from bendiocarb, LLIN material, and fungal spores (although speed of kill was slower for fungus). The impact of treated netting on recapture rates ranged from 50 to 70 % reduction relative to controls. In subsequent experiments comparing bendiocarb-treated netting in eave tubes against a standard LLIN, the effect size was smaller but the eave tubes with closed eaves performed at least as well as the LLIN with open eaves. In the model village, introducing LLINs led to an approximate 60 % reduction in larval densities and 85 % reduction in indoor catches of host-seeking mosquitoes relative to pre-intervention values. Installing eave tubes and screening further reduced larval density (93 % relative to pre intervention values) and virtually eliminated indoor host-seeking mosquitoes. When the eave tubes and screening were removed, larval and adult catches recovered to pre-eave tube levels. These trials suggest that the “eave tube” package can impact overnight survival of host-seeking mosquitoes and can suppress mosquito populations, even in a complex environment. Further testing is now required to evaluate the robustness of these findings and demonstrate impact under field conditions.
- Open Access
- 11 August 2016
- Published by Springer Nature in Malaria Journal
- Vol. 15 (1) , 1-7
Eave tubes for malaria control in Africa: an introduction
In spite of massive progress in the control of African malaria since the turn of the century, there is a clear and recognized need for additional tools beyond long-lasting insecticide-treated bed nets (LLINs) and indoor residual spraying (IRS) of insecticides, to progress towards elimination. Moreover, widespread and intensifying insecticide resistance requires alternative control agents and delivery systems to enable development of effective insecticide resistance management strategies. This series of articles presents a novel concept for malaria vector control, the ‘eave tube’, which may fulfil these important criteria. From its conceptualization to laboratory and semi-field testing, to demonstration of potential for implementation, the stepwise development of this new vector control approach is described. These studies suggest eave tubes (which comprise a novel way of delivering insecticides plus screening to make the house more ‘mosquito proof’) could be a viable, cost-effective, and acceptable control tool for endophilic and endophagic anophelines, and possibly other (nuisance) mosquitoes. The approach could be applicable in a wide variety of housing in sub-Saharan Africa, and possibly beyond, for vectors that use the eave as their primary house entry point. The results presented in these articles were generated during an EU-FP7 funded project, the mosquito contamination device (MCD) project, which ran between 2012 and 2015. This was a collaborative project undertaken by vector biologists, product developers, modellers, materials scientists, and entrepreneurs from five different countries.
- 11 August 2016
- Published by Springer Nature in Malaria Journal
- Vol. 15 (1) , 1-7
Open AccessEave tubes for malaria control in Africa: an introduction
In spite of massive progress in the control of African malaria since the turn of the century, there is a clear and recognized need for additional tools beyond long-lasting insecticide-treated bed nets (LLINs) and indoor residual spraying (IRS) of insecticides, to progress towards elimination. Moreover, widespread and intensifying insecticide resistance requires alternative control agents and delivery systems to enable development of effective insecticide resistance management strategies. This series of articles presents a novel concept for malaria vector control, the ‘eave tube’, which may fulfil these important criteria. From its conceptualization to laboratory and semi-field testing, to demonstration of potential for implementation, the stepwise development of this new vector control approach is described. These studies suggest eave tubes (which comprise a novel way of delivering insecticides plus screening to make the house more ‘mosquito proof’) could be a viable, cost-effective, and acceptable control tool for endophilic and endophagic anophelines, and possibly other (nuisance) mosquitoes. The approach could be applicable in a wide variety of housing in sub-Saharan Africa, and possibly beyond, for vectors that use the eave as their primary house entry point. The results presented in these articles were generated during an EU-FP7 funded project, the mosquito contamination device (MCD) project, which ran between 2012 and 2015. This was a collaborative project undertaken by vector biologists, product developers, modellers, materials scientists, and entrepreneurs from five different countries.
- Open Access
- 16 December 2014
- Published by Springer Nature in Malaria Journal
- Vol. 13 (1) , 499
Evaluating the efficacy of biological and conventional insecticides with the new ‘MCD bottle’ bioassay
Control of mosquitoes requires the ability to evaluate new insecticides and to monitor resistance to existing insecticides. Monitoring tools should be flexible and low cost so that they can be deployed in remote, resource poor areas. Ideally, a bioassay should be able to simulate transient contact between mosquitoes and insecticides, and it should allow for excito-repellency and avoidance behaviour in mosquitoes. Presented here is a new bioassay, which has been designed to meet these criteria. This bioassay was developed as part of the Mosquito Contamination Device (MCD) project and, therefore, is referred to as the MCD bottle bioassay.
- 16 December 2014
- Published by Springer Nature in Malaria Journal
- Vol. 13 (1) , 499
Open AccessEvaluating the efficacy of biological and conventional insecticides with the new ‘MCD bottle’ bioassay
Control of mosquitoes requires the ability to evaluate new insecticides and to monitor resistance to existing insecticides. Monitoring tools should be flexible and low cost so that they can be deployed in remote, resource poor areas. Ideally, a bioassay should be able to simulate transient contact between mosquitoes and insecticides, and it should allow for excito-repellency and avoidance behaviour in mosquitoes. Presented here is a new bioassay, which has been designed to meet these criteria. This bioassay was developed as part of the Mosquito Contamination Device (MCD) project and, therefore, is referred to as the MCD bottle bioassay.