SRSoumyendu Roy

Soumyendu Roy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Soumyendu Roy has a total of 112 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unveiling the Role of Mo in MnCoMo Oxide for Efficient Hydrogen Production via Alkaline Seawater Electrolysis

    by Jyoti Raghav, Divya Choudhary, Priya Pandey, Sapna Raghav, V. S. Pandey, Sunil Singh Kushvaha, Soumyendu Roy

    Direct seawater electrolysis is a promising strategy for large-scale green hydrogen production, yet it remains hindered by the poor selectivity and durability of earth-abundant electrocatalysts under chloride-rich conditions. Here, we report a systematic investigation of the effect of molybdenum (Mo) content on the bifunctional electrocatalytic activity of hydrothermally synthesised MnCoMo oxide microrods grown on nickel foam (NF) substrates. Three compositions, MnCoMo_0.25, MnCoMo_0.5, and MnCoMo_0.75, were prepared by varying molybdenum concentration (0.25, 0.5, and 0.75 mmol, respectively). Electrochemically, MnCoMo_0.5 achieves the best oxygen evolution reaction (OER) performance in alkaline seawater, with a Tafel slope of 69 mV dec−1. MnCoMo_0.75 delivers superior hydrogen evolution reaction (HER) activity with a Tafel slope of 74 mV dec−1. Both electrodes demonstrate near-identical polarisation profiles across 1 M KOH, 1 M KOH + 0.5 M NaCl, and alkaline seawater electrolytes, demonstrating exceptional chloride tolerance. These results establish Mo loading as a critical tuning parameter for bifunctional activity and provide rational design principles for high-performance, earth-abundant seawater electrolysis catalysts.

  • Transition Metal Nitrides as Bifunctional Materials for Supercapacitor and Water-Splitting Applications: A Review of Recent Advances and Future Perspectives

    by Kumari Diksha, Soumyendu Roy, Jyoti Raghav

    The increasing demand for sustainable energy systems and carbon-neutral systems have accelerated the development of multifunctional electrode and catalyst materials capable of simultaneously maintaining energy storage and conversion mechanisms. Transition metal nitrides (TMNs) are an interesting group of materials owing to their metallic conductivity, controllable electronic structure, high chemical stability, and rich surface redox chemistry. All these attributes render TMNs possible bifunctional material in supercapacitor and water-splitting systems. This is a critical review of the recent advances in the use of TMN-based materials as far as energy storage and hydrogen generation applications are concerned. Their fundamental characteristics determining their electrochemical behavior, including metal–nitrogen bonding, electronic structure modulation, surface reconstruction, and charge-transfer kinetics are described. Special focus is given to structure–property–performance correlations in monometallic, bimetallic, and heterostructure nitrides, which display the positive impacts of morphology engineering, compositional control, and interface control on capacitive charge storage, as well as hydrogen and oxygen evolution reaction activity. The most critical issues of stability, scalability, and the loss of nitrogen, as well as performance deterioration under real operating conditions, are critically evaluated. Finally, future research directions for the rational design of TMN-based bifunctional materials toward integrated and sustainable energy technologies are outlined.


  • Octylammonium Spacer-Driven Enhanced Stability in Quasi-Two-Dimensional Perovskite Solar Cells Fabricated under Ambient Conditions

    by Km Sakshi, Tajamul Wani, Manish Sharma, Rosaiah Pitcheri, Abhimanyu Singh Rana, Reeti Bajpai, Ankur Goswami, Soumyendu Roy


  • Nanoflowers of Ternary Cobalt–Copper–Manganese Oxide as an Efficient Electrocatalyst for Oxygen Evolution Reaction

    by Jyoti Raghav, P. Rosaiah, Bandar Ali Al‐Asbahi, Soumyendu Roy

    Oxygen evolution reaction (OER) is an integral step in the water‐splitting process. Hence, to promote OER, efficient catalysts are required to lower the energy barriers at the electrode/electrolyte interface. Low‐cost and highly active catalysts are in great demand. Herein, a ternary metal oxide, CoCuMnOx, synthesized by a facile hydrothermal method is reported, which possesses excellent catalytic ability for OER in alkaline electrolytes. The nanoscale morphology of the catalyst with flower‐like nanostructures is instrumental in increasing the electrochemical surface area of the electrode. The presence of multivalent ions and the incorporation of copper greatly enhance the electrochemical properties of the catalysts. The catalysts typically demonstrate an overpotential value of 220 mV for achieving 10 mA cm−2 current density and a Tafel slope of 73 mV dec−1. The catalysts demonstrate good stability with minimal degradation in OER activity even after 20 h of chronopotentiometry test. For practical applications, this low‐cost material holds great potential.


  • Open Access

    Investigation of Visible and UV Light‐Induced Photocatalysis Properties of Oleic Acid‐Ligated Cobalt‐Mixed Magnesium Ferrite Nanoparticles for Photodegradation of Cationic and Anionic Dyes

    by S. Vadivel, N. Maaouni, Mohammad Rezaul Karim, Ibrahim A. Alnaser, Theophile Niyitanga, Haekyoung Kim, Soumyendu Roy

    Owing to numerous potential applications in multiple fields, the study of nanosized magnetic spinel ferrites has been gaining significance. Synthesis and characterization of high‐quality magnetic nanocrystals with narrow size distribution, enhanced magnetic saturation, and outstanding properties for bioenvironmental applications are presented in the current study. Nanoparticles of oleic acid‐ligated Co0.5‐mixed Mg0.5Fe2O4 were prepared by a simple thermal decomposition method. The effect of cobalt (Co2+) content on the structural, optical, magnetic, and thermal properties of magnesium ferrite was assessed by powder X‐ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT‐IR), and vibrating sample magnetometer (VSM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). High‐resolution transmission electron microscopy (HR‐TEM) and energy dispersive X‐ray (EDX) spectroscopy were used to determine morphology and composition, respectively. Nanoparticles produced are highly crystalline and homogeneous, having an average size of 10 nm, with large saturation magnetization (61 emu/g) and high magnetic moment. Photocatalytic properties of prepared nanocrystals were studied by degradation of anionic Orange II and cationic methylene blue (MB) dyes under UV and visible light radiations for different time intervals. The anionic Orange II dye exhibited higher degradation, up to 97.2% and 92.2%, within a 90‐minute time period of ultraviolet and visible light irradiation, respectively. The cationic MB dye also displayed significant degradation, up to 91.9% and 93.8%, within 300 min under UV and visible light sources, respectively. The synthesized OA‐ligated nanoparticles degrade cationic and anionic dyes more effectively than previously reported in the literature and, thus, can be prime candidates for effective photo catalytic dye degradation and waste water cleaning applications, through the harvesting of ambient solar energy.


  • Open Access

    Copper Oxide Nanoparticles Anchored on Porous Carbon Nitride Nanosheets for Supercapacitor Applications

    by Dhananjaya Merum, Rosaiah Pitcheri, Nipa Roy, Naveen Kumar Kilari, Ammar Mohamed Tighezza, Soumyendu Roy, Sang Woo Joo

    Electrochemical energy storage devices are vital for renewable energy integration and the deployment of electric vehicles. Ongoing research seeks to create new materials with innovative morphologies capable of delivering high specific capacitance for the next generation of customizable energy devices. Carbon nitride is an excellent candidate for electrochemical energy storage devices; however, it has limitations such as layer stacking, poor electric conductivity, a restricted number of electroactive sites, and static electrochemical reaction rates. This research objective is to make porous structures in carbon nitride nanosheets and integrate them with CuO particles to increase surface area and improve electrochemical performance. The use of thermal heating, acidic treatment, and hydrothermal processes accomplishes this. Along with X‐ray diffraction peaks of the CuO phase, a prominent peak (002) at 27.67° indicates the presence of graphitic‐structured carbon nitride. TEM images show that CuO particles are evenly attached to the surface of g‐C3N4 nanosheets with lattice intervals of 0.336 and 0.232 nm, which are the (002) and (111) orientations of the g‐C3N4 and CuO phases, respectively. Adding CuO nanoparticles to porous g‐C3N4 nanosheets avoids layer stacking and provides micro‐ and mesopore channels, increasing the specific surface area (42.60 m2 g-1). The CuO@ porous g‐C3N4 electrode delivered 817 F g-1 of specific capacitance at 1 A g-1 and admirable capacitance retention (92.3% after 6000 cycles) due to the synergistic impact of its unique composition and structural characteristics. Because of its outstanding electrochemical performance and fascinating discoveries, CuO@ porous g‐C3N4 may be employed as a cathode material for high‐performance supercapacitors.


  • Open Access

    Chemical Synthesis of ZnO:Er Nanorods for Photocatalytic H2 Evolution

    by B. Poornaprakash, Peddathimula Puneetha, A. Subba Reddy, P. Reddy Prasad, M. Siva Pratap Reddy, Ammar M. Tighezza, P. Rosaiah, Sambasivam Sangaraju, Si-Hyun Park, B. Purusottam Reddy, et al.

    The growth of one-dimensional (1D) ZnO systems has been attaining ample engrossment because of their unique photocatalytic and optoelectronic properties. In this context, we synthesized the high-quality ZnO and ZnO:Er nanorods through an inexpensive and facile solvothermal route. Morphological studies revealed that the fabricated samples correspond to nanorods. Erbium ion substitution into the host ZnO matrix was affirmed via XRD and Raman analyses. XPS analysis proposed that Er ion substitution in the Zn (II) site occurred with trivalent Er ions. The trivial diminishing of the optical band gap with the incorporation of Er into the host matrix was assessed by diffuse reflectance spectroscopy (DRS) studies. The photoluminescence spectra of both fabricated NRs display two nodes at ultraviolet and red luminescence. The fluorescence efficiency of the ZnO NRs diminished after Er doping. The ZnO and ZnO:Er NRs were measured for H2 evolution by water splitting beneath the UV light illumination. The ZnO:Er illustrated the efficient H2 evolution ability (21311μmolh−1g−1) in 5h, which is higher than that of ZnO. To analyze the attained engrossing H2 outcomes, electrochemical studies were also employed. Fortunately, this is the first-ever endeavor in H2 production of the ZnO:Er NRs.


  • Open Access

    Fabrication of Porous Ni-Co LDH Nanocomposites as Efficient Electrodes for Supercapacitors

    by P. Rosaiah, S. Vadivel, Nunna Guru Prakash, Merum Dhananjaya, Bandar Ali Al-Asbahi, Soumyendu Roy, U. Chalapathi, Si-Hyun Park

    Nowadays, there is constant demand for the development of energy storage materials using advanced methodologies. In this scenario, a large-scale environmentally friendly synthesis was chosen to prepare Ni-Co-layered double hydroxide (LDH) composites for asymmetric supercapacitors. The developed materials had a flower-like porous architecture with very low dimensional layers and a large surface area. The developed Ni-Co/LDH composite electrodes showed impressive specific capacitance of 1095.1 F/g at a current density of 1 A/g and maintained 492.5 F/g even at a current density of 20 A/g. In particular, the Ni-Co/LDH composites maintained 86.9% of their initial capacitance even after 5000 cycles at a high current density of 2 A/g. Furthermore, an asymmetric supercapacitor with Ni-Co/LDH composites demonstrated an excellent energy density of 40.7 Wh/kg at a power density of 750 W/kg.