Daniel Wismeijer
Research Subjects
Research Interests
Daniel Wismeijer has a total of 171 co-authors. Here are the top co-authors by number of shared publications:
- Ali Tahmaseb
Department of Oral and Maxillofacial Surgery Erasmus University Rotterdam The Netherlands
9 shared publications Renaat De Clerck
5 shared publications- Gang Wu
Savid School of Stomatology, Hangzhou Medical College, Hangzhou, China
3 shared publications - Julia‐Gabriela Wittneben
Department of Reconstructive Dentistry & Gerodontology, School of Dental Medicine, University of Bern, Bern, Switzerland
3 shared publications - Marja L. Laine
Department of Periodontology, Academic Centre for Dentistry Amsterdam, University of Amsterdam and VU University Amsterdam, Amsterdam, The Netherlands
3 shared publications - Tabea Flügge
Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin Berlin, Freie Universität Berlin, Humboldt-Universität zu Berlin, Berlin Institute of Health, Berlin, Germany
3 shared publications
Latest Publications
- 5 October 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (2) , 340.e1-340.e10
Emergence angles of posterior implant-supported fixed dental prostheses and their effect on peri-implant bone loss: A retrospective clinical study
- 5 October 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (2) , 340.e1-340.e10
Emergence angles of posterior implant-supported fixed dental prostheses and their effect on peri-implant bone loss: A retrospective clinical study
- Open Access
- 26 September 2023
- Published by Wiley in Clinical Oral Implants Research
- Vol. 34 (S26) , 266-303
Clinical performance of immediately placed and immediately loaded single implants in the esthetic zone: A systematic review and meta‐analysis
Objectives: The aim of this study was to assess the following PIO question: In adult patients treated with an indication for single tooth extraction in the maxillary esthetic zone (15–25), what is the influence of an immediate implant placement and immediate loading protocol on the clinical performance (primary aim) and esthetic outcomes (secondary aim) focusing on investigations published after 2010.Material and Methods: An electronic search in Medline (PubMed), the Cochrane Central Register of Controlled Trials, and EMBASE databases up to April 2022 was performed to identify clinical studies investigating the outcome of single implants subjected to immediate placement with immediate restoration/loading (Type 1A).Results: Sixty‐three studies (10 randomized controlled trials, 28 prospective and 25 retrospective cohort studies) were included with a follow‐up ranging from 12 to 96 months. One thousand nine hundred sixty‐one implants reported survival rates of 99.2 (98.6–99.5) % at 1 year, 97.5 (95.9–98.4) % after 3 years, and 95.8 (93.3–97.4) % after 5 years; 1064 immediately loaded restorations presented survival rates of 98.9 (97.8–99.5) % after 1 year, 96.8 (93.6–98.4) % after 2 years, and 94.8 (89.6–97.4) % after 5 years. Comparing baseline to 12‐month data using the Hedges' g effect size (95% CI), papilla height presented an overall effect size of −0.71 (−1.25, −0.1) mm, midfacial recession change of −0.15 (−0.66, 0.36) mm, and a 0.82 (0.37, 1.28) gain in PES.Conclusions: Immediate implant placement and immediate loading can be considered a predictable and safe treatment option for single maxillary anterior restorations with adequate survival rates and favorable esthetics outcomes for up to 5 years.
- 26 September 2023
- Published by Wiley in Clinical Oral Implants Research
- Vol. 34 (S26) , 266-303
Open AccessClinical performance of immediately placed and immediately loaded single implants in the esthetic zone: A systematic review and meta‐analysis
Objectives: The aim of this study was to assess the following PIO question: In adult patients treated with an indication for single tooth extraction in the maxillary esthetic zone (15–25), what is the influence of an immediate implant placement and immediate loading protocol on the clinical performance (primary aim) and esthetic outcomes (secondary aim) focusing on investigations published after 2010.Material and Methods: An electronic search in Medline (PubMed), the Cochrane Central Register of Controlled Trials, and EMBASE databases up to April 2022 was performed to identify clinical studies investigating the outcome of single implants subjected to immediate placement with immediate restoration/loading (Type 1A).Results: Sixty‐three studies (10 randomized controlled trials, 28 prospective and 25 retrospective cohort studies) were included with a follow‐up ranging from 12 to 96 months. One thousand nine hundred sixty‐one implants reported survival rates of 99.2 (98.6–99.5) % at 1 year, 97.5 (95.9–98.4) % after 3 years, and 95.8 (93.3–97.4) % after 5 years; 1064 immediately loaded restorations presented survival rates of 98.9 (97.8–99.5) % after 1 year, 96.8 (93.6–98.4) % after 2 years, and 94.8 (89.6–97.4) % after 5 years. Comparing baseline to 12‐month data using the Hedges' g effect size (95% CI), papilla height presented an overall effect size of −0.71 (−1.25, −0.1) mm, midfacial recession change of −0.15 (−0.66, 0.36) mm, and a 0.82 (0.37, 1.28) gain in PES.Conclusions: Immediate implant placement and immediate loading can be considered a predictable and safe treatment option for single maxillary anterior restorations with adequate survival rates and favorable esthetics outcomes for up to 5 years.
- Open Access
- 4 October 2022
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 17 (01) , 255-260
Gaining Soft Tissue with a Hydrogel Soft Tissue Expander: A Case Report
In this case report, we describe the treatment of a patient referred to our clinic with a hopeless tooth 21 with an attached pontic. The aim of this case report was to, first, describe the advantages and disadvantages of gaining soft tissue with a self-inflating soft tissue expander before performing a bone augmentation procedure in implant dentistry in the esthetic zone. Second, we describe how an amalgam tattoo, caused by a previously performed apicoectomy that made the extension of the raised flap to cover the augmented site esthetically undesirable, was removed. Two silicone enveloped Osmed hydrogel self-inflating soft tissue expanders were placed submucosally on the right- and left-hand side of the amalgam tattoo. One of these two perforated the overlaying mucosa after 24 days. Both tissue expanders were removed, the amalgam tattoo was excided, the site augmented, and an implant with a crown and a pontic was placed.
- 4 October 2022
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 17 (01) , 255-260
Open AccessGaining Soft Tissue with a Hydrogel Soft Tissue Expander: A Case Report
In this case report, we describe the treatment of a patient referred to our clinic with a hopeless tooth 21 with an attached pontic. The aim of this case report was to, first, describe the advantages and disadvantages of gaining soft tissue with a self-inflating soft tissue expander before performing a bone augmentation procedure in implant dentistry in the esthetic zone. Second, we describe how an amalgam tattoo, caused by a previously performed apicoectomy that made the extension of the raised flap to cover the augmented site esthetically undesirable, was removed. Two silicone enveloped Osmed hydrogel self-inflating soft tissue expanders were placed submucosally on the right- and left-hand side of the amalgam tattoo. One of these two perforated the overlaying mucosa after 24 days. Both tissue expanders were removed, the amalgam tattoo was excided, the site augmented, and an implant with a crown and a pontic was placed.
- Open Access
- 15 March 2022
- Published by Wiley in Clinical Oral Implants Research
- Vol. 33 (5) , 548-557
Non‐surgical peri‐implantitis treatment with or without systemic antibiotics: a randomized controlled clinical trial
Objectives: To assess the adjunctive effect of systemic amoxicillin (AMX) and metronidazole (MTZ) in patients receiving non‐surgical treatment (NST) for peri‐implantitis (PI).Materials and methods: Thirty‐seven patients were randomized into an experimental group treated with NST plus AMX + MTZ (N = 18) and a control group treated with NST alone (N = 19). Clinical parameters were evaluated at 12 weeks post‐treatment. The primary outcome was the change in peri‐implant pocket depth (PIPD) from baseline to 12 weeks, while secondary outcomes included bleeding on probing (BoP), suppuration on probing (SoP), and plaque. Data analysis was performed at patient level (one target site per patient).Results: All 37 patients completed the study. Both groups showed a significant PIPD reduction after NST. The antibiotics group showed a higher mean reduction in PIPD at 12 weeks, compared with the control group (2.28 ± 1.49 mm vs. 1.47 ± 1.95 mm), however, this difference did not reach statistical significance. There was no significant effect of various potential confounders on PIPD reduction. Neither treatment resulted in significant improvements in BoP at follow‐up; 30 of 37 (81%) target sites still had BoP after treatment. Only two implants, one in each group, exhibited a successful outcome defined as PIPD < 5 mm, and absence of BoP and SoP.Conclusions: Non‐surgical treatment was able to reduce PIPD at implants with PI. The adjunctive use of systemic AMX and MTZ did not show statistically significant better results compared to NST alone. NST with or without antibiotics was ineffective to completely resolve inflammation around dental implants.
- 15 March 2022
- Published by Wiley in Clinical Oral Implants Research
- Vol. 33 (5) , 548-557
Open AccessNon‐surgical peri‐implantitis treatment with or without systemic antibiotics: a randomized controlled clinical trial
Objectives: To assess the adjunctive effect of systemic amoxicillin (AMX) and metronidazole (MTZ) in patients receiving non‐surgical treatment (NST) for peri‐implantitis (PI).Materials and methods: Thirty‐seven patients were randomized into an experimental group treated with NST plus AMX + MTZ (N = 18) and a control group treated with NST alone (N = 19). Clinical parameters were evaluated at 12 weeks post‐treatment. The primary outcome was the change in peri‐implant pocket depth (PIPD) from baseline to 12 weeks, while secondary outcomes included bleeding on probing (BoP), suppuration on probing (SoP), and plaque. Data analysis was performed at patient level (one target site per patient).Results: All 37 patients completed the study. Both groups showed a significant PIPD reduction after NST. The antibiotics group showed a higher mean reduction in PIPD at 12 weeks, compared with the control group (2.28 ± 1.49 mm vs. 1.47 ± 1.95 mm), however, this difference did not reach statistical significance. There was no significant effect of various potential confounders on PIPD reduction. Neither treatment resulted in significant improvements in BoP at follow‐up; 30 of 37 (81%) target sites still had BoP after treatment. Only two implants, one in each group, exhibited a successful outcome defined as PIPD < 5 mm, and absence of BoP and SoP.Conclusions: Non‐surgical treatment was able to reduce PIPD at implants with PI. The adjunctive use of systemic AMX and MTZ did not show statistically significant better results compared to NST alone. NST with or without antibiotics was ineffective to completely resolve inflammation around dental implants.
- Open Access
- 14 March 2022
- Published by Elsevier in Journal of Dentistry
- Vol. 120, 104094
Analysis of the residual monomer content in milled and 3D-printed removable CAD-CAM complete dentures: an in vitro study
- 14 March 2022
- Published by Elsevier in Journal of Dentistry
- Vol. 120, 104094
Open AccessAnalysis of the residual monomer content in milled and 3D-printed removable CAD-CAM complete dentures: an in vitro study
- Open Access
- 12 October 2021
- Published by Wiley in Clinical Oral Implants Research
- Vol. 32 (S21) , 303-317
Time and costs related to computer‐assisted versus non‐computer‐assisted implant planning and surgery. A systematic review
Aim: To study the time and costs involved with computer‐assisted versus non‐computer‐assisted implant planning and placement.Material and methods: Based on the PICO question, “In patients receiving dental implants, is computer‐assisted implant planning and surgery (CAIPS) compared to non‐computer‐assisted implant planning and surgery (non‐CAIPS) beneficial in terms of treatment related costs and time involved?”, a search path was created to perform an electronic search in the databases PubMed, PubMed Central, EMBASE, and Cochrane. The publication period of eligible publications extended from 01.01.2005 to 04.05.2020. Four independent reviewers reviewed the literature to identify studies that met the eligibility inclusion criteria. A further manual search of articles was performed, and gray literature was excluded. Corresponding authors of potentially eligible manuscripts were contacted for further information.Results: Of the 1354 retrieved titles after the search were screened. Thirty‐one articles have been identified to read the full text, resulting in four articles to be analyzed for the present review all of which were RCTs. In total, 182 partially and completely edentulous patients were treated with 416 implants following either non‐computer‐assisted or computer‐assisted implant planning and surgery to determine the duration of the single working steps and the financial aspects of the different procedures.Conclusions: When evaluating the time and costs involved with the diagnostic and planning procedures in computer‐assisted implant planning and surgery workflow protocols, one can summarize that these are higher than in the non‐computer‐assisted workflow protocols. The time involved with the procedures appears to be the driving factor when it comes to economic considerations. On the basis of the conclusions, also the time for the prosthetic restoration should be taken into account.
- 12 October 2021
- Published by Wiley in Clinical Oral Implants Research
- Vol. 32 (S21) , 303-317
Open AccessTime and costs related to computer‐assisted versus non‐computer‐assisted implant planning and surgery. A systematic review
Aim: To study the time and costs involved with computer‐assisted versus non‐computer‐assisted implant planning and placement.Material and methods: Based on the PICO question, “In patients receiving dental implants, is computer‐assisted implant planning and surgery (CAIPS) compared to non‐computer‐assisted implant planning and surgery (non‐CAIPS) beneficial in terms of treatment related costs and time involved?”, a search path was created to perform an electronic search in the databases PubMed, PubMed Central, EMBASE, and Cochrane. The publication period of eligible publications extended from 01.01.2005 to 04.05.2020. Four independent reviewers reviewed the literature to identify studies that met the eligibility inclusion criteria. A further manual search of articles was performed, and gray literature was excluded. Corresponding authors of potentially eligible manuscripts were contacted for further information.Results: Of the 1354 retrieved titles after the search were screened. Thirty‐one articles have been identified to read the full text, resulting in four articles to be analyzed for the present review all of which were RCTs. In total, 182 partially and completely edentulous patients were treated with 416 implants following either non‐computer‐assisted or computer‐assisted implant planning and surgery to determine the duration of the single working steps and the financial aspects of the different procedures.Conclusions: When evaluating the time and costs involved with the diagnostic and planning procedures in computer‐assisted implant planning and surgery workflow protocols, one can summarize that these are higher than in the non‐computer‐assisted workflow protocols. The time involved with the procedures appears to be the driving factor when it comes to economic considerations. On the basis of the conclusions, also the time for the prosthetic restoration should be taken into account.
- Open Access
- 12 October 2021
- Published by Wiley in Clinical Oral Implants Research
- Vol. 32 (S21) , 336-341
Fabrication, workflow and delivery of reconstruction: Summary and consensus statements of group 4. The 6th EAO Consensus Conference 2021
Objectives: To report assessments of four systematic reviews (SRs) on (i) clinical outcomes of all‐ceramic implant‐supported crowns (iSCs), (ii) production time, effectiveness, and costs of computer‐assisted manufacturing (CAM), (iii) computer‐assisted implant planning and surgery (CAIPS) time and costs, and (iv) patient‐reported outcome measures (PROMS).Material and Methods: An author group consisting of experienced clinicians and content experts discussed and evaluated the SRs and formulated consensus on the main findings, statements, clinical recommendations, and need for future research.Results: All four SRs were conducted and reported according to PRISMA and detailed comprehensive search strategies in at least three bibliometric databases and hand searching. The search strategies were deemed reproducible. Variation was noted regarding language restrictions and inclusion of grey literature, but the search comprehensiveness appeared persuasive. The SRs included bias risk assessments of the primary studies, and their study methodology impacted the interpretations of the extracted data.Conclusions: (i) There is limited evidence (49 NRCT) showing that veneered and monolithic all‐ceramic iSCs have excellent outcomes observed up to 3 years. (ii) There is no evidence evaluating production time and effectiveness comparing subtractive and additive CAM of implant models, abutments and crowns. (iii) There is limited evidence (4 RCT) that CAIPS involves more time and costs when considering the entire workflow and for diagnostics, manufacturing, and insertion of the restoration. Time seems to be the decisive factor for higher costs. (iv) Patients’ comfort increases when optical compared to conventional impressions are used for fabricating iSCs and short‐span FPDs (2 RCT, 5 NRCT).
- 12 October 2021
- Published by Wiley in Clinical Oral Implants Research
- Vol. 32 (S21) , 336-341
Open AccessFabrication, workflow and delivery of reconstruction: Summary and consensus statements of group 4. The 6th EAO Consensus Conference 2021
Objectives: To report assessments of four systematic reviews (SRs) on (i) clinical outcomes of all‐ceramic implant‐supported crowns (iSCs), (ii) production time, effectiveness, and costs of computer‐assisted manufacturing (CAM), (iii) computer‐assisted implant planning and surgery (CAIPS) time and costs, and (iv) patient‐reported outcome measures (PROMS).Material and Methods: An author group consisting of experienced clinicians and content experts discussed and evaluated the SRs and formulated consensus on the main findings, statements, clinical recommendations, and need for future research.Results: All four SRs were conducted and reported according to PRISMA and detailed comprehensive search strategies in at least three bibliometric databases and hand searching. The search strategies were deemed reproducible. Variation was noted regarding language restrictions and inclusion of grey literature, but the search comprehensiveness appeared persuasive. The SRs included bias risk assessments of the primary studies, and their study methodology impacted the interpretations of the extracted data.Conclusions: (i) There is limited evidence (49 NRCT) showing that veneered and monolithic all‐ceramic iSCs have excellent outcomes observed up to 3 years. (ii) There is no evidence evaluating production time and effectiveness comparing subtractive and additive CAM of implant models, abutments and crowns. (iii) There is limited evidence (4 RCT) that CAIPS involves more time and costs when considering the entire workflow and for diagnostics, manufacturing, and insertion of the restoration. Time seems to be the decisive factor for higher costs. (iv) Patients’ comfort increases when optical compared to conventional impressions are used for fabricating iSCs and short‐span FPDs (2 RCT, 5 NRCT).
- Open Access
Coralline Hydroxyapatite Coated with a Layer Biomimetic Calcium Phosphate Containing BMP-2 Induces Dose-Related Ectopic Bone Formation in Wistar Rats
In order to evaluate loading methods and the dose dependency of bone morphogenetic protein 2 (BMP-2) in ectopic bone formation, an osteoinductive material consisting of commercially available coralline hydroxyapatite (CHA) was coated with a layer of biomimetic calcium phosphate (BioCaP) containing BMP-2 in different ways. Eight groups—each containing samples of 0.25 g CHA—were formed and coated with, respectively, BioCaP with internally incorporated BMP-2 in concentrations of 1, 5, 10, 20, 40 and 60 µg per sample, and the two control groups with BioCaP only and BioCaP with 20 µg of adsorbed BMP-2 per sample. The samples were implanted subcutaneously in 27 male Wistar rats. The histological results show that there is no bone formation in the group in which no BMP-2 was included. All samples with BioCaP containing BMP-2 show bone formation. The group with 20 µg of adsorbed BMP-2 per sample shows the least bone formation. Coating-incorporated BMP-2 is more efficient in inducing bone formation than adsorbed BMP-2. The group with 5 µg of coating-incorporated BMP-2 per sample shows the most bone formation. Increasing the amount of coating-incorporated BMP-2 up to 60 µg does not improve ectopic bone formation.
Open AccessCoralline Hydroxyapatite Coated with a Layer Biomimetic Calcium Phosphate Containing BMP-2 Induces Dose-Related Ectopic Bone Formation in Wistar Rats
In order to evaluate loading methods and the dose dependency of bone morphogenetic protein 2 (BMP-2) in ectopic bone formation, an osteoinductive material consisting of commercially available coralline hydroxyapatite (CHA) was coated with a layer of biomimetic calcium phosphate (BioCaP) containing BMP-2 in different ways. Eight groups—each containing samples of 0.25 g CHA—were formed and coated with, respectively, BioCaP with internally incorporated BMP-2 in concentrations of 1, 5, 10, 20, 40 and 60 µg per sample, and the two control groups with BioCaP only and BioCaP with 20 µg of adsorbed BMP-2 per sample. The samples were implanted subcutaneously in 27 male Wistar rats. The histological results show that there is no bone formation in the group in which no BMP-2 was included. All samples with BioCaP containing BMP-2 show bone formation. The group with 20 µg of adsorbed BMP-2 per sample shows the least bone formation. Coating-incorporated BMP-2 is more efficient in inducing bone formation than adsorbed BMP-2. The group with 5 µg of coating-incorporated BMP-2 per sample shows the most bone formation. Increasing the amount of coating-incorporated BMP-2 up to 60 µg does not improve ectopic bone formation.
- Open Access
- 3 June 2021
- Published by Wiley in Clinical Oral Implants Research
- Vol. 32 (8) , 962-970
Randomized Clinical Trial comparing clinical adjustment times of CAD/CAM screw‐retained posterior crowns on ti‐base abutments created with digital or conventional impressions. One‐year follow‐up
Objectives: The purpose of this randomized clinical trial was to compare the required time of potential clinical adjustments of posterior screw‐retained monolithic zirconia implant retained crowns based on intraoral optical scanning (IOS) or conventional impressions.Materials and methods: Patients with posterior tissue level implants (Straumann RN) replacing solitary teeth were recruited. Of all patients, impressions were taken with both an IOS (3M™ TDS) and a conventional (polyether) pick‐up impression. Randomization was performed after impression taking and patients were to receive either a crown based on the digital or the conventional impression. The time required for adjustments at placement was recorded. Additionally, restoration survival and mechanical complications with a follow‐up of one year were documented.Results: Thirty two patients with 45 implants were included: 23 restorations in the test (IOS) and 22 in the control (conventional) group. The average adjustment time was 3.35 min (SD ± 3.38, range: 0–11 min) for the digital versus 6.09 min (SD ± 4.63, range: 0–18 min) for the conventional impressions (p = .039). A proper fit (no adjustments required) was achieved 39,1% in the digital and 18,2% conventional group respectively. All 45 restorations could be placed within the two planned appointments and only two minor mechanical complications occurred during the first year of function.Conclusions: The use of IOS resulted in shorter adjustment times at try‐in than conventional impressions for solitary CAD/CAM implant restorations. Screw‐retained solitary monolithic zirconia restorations on ti‐base abutments show low complication‐ and survival rates in the short term.
- 3 June 2021
- Published by Wiley in Clinical Oral Implants Research
- Vol. 32 (8) , 962-970
Open AccessRandomized Clinical Trial comparing clinical adjustment times of CAD/CAM screw‐retained posterior crowns on ti‐base abutments created with digital or conventional impressions. One‐year follow‐up
Objectives: The purpose of this randomized clinical trial was to compare the required time of potential clinical adjustments of posterior screw‐retained monolithic zirconia implant retained crowns based on intraoral optical scanning (IOS) or conventional impressions.Materials and methods: Patients with posterior tissue level implants (Straumann RN) replacing solitary teeth were recruited. Of all patients, impressions were taken with both an IOS (3M™ TDS) and a conventional (polyether) pick‐up impression. Randomization was performed after impression taking and patients were to receive either a crown based on the digital or the conventional impression. The time required for adjustments at placement was recorded. Additionally, restoration survival and mechanical complications with a follow‐up of one year were documented.Results: Thirty two patients with 45 implants were included: 23 restorations in the test (IOS) and 22 in the control (conventional) group. The average adjustment time was 3.35 min (SD ± 3.38, range: 0–11 min) for the digital versus 6.09 min (SD ± 4.63, range: 0–18 min) for the conventional impressions (p = .039). A proper fit (no adjustments required) was achieved 39,1% in the digital and 18,2% conventional group respectively. All 45 restorations could be placed within the two planned appointments and only two minor mechanical complications occurred during the first year of function.Conclusions: The use of IOS resulted in shorter adjustment times at try‐in than conventional impressions for solitary CAD/CAM implant restorations. Screw‐retained solitary monolithic zirconia restorations on ti‐base abutments show low complication‐ and survival rates in the short term.