Elena Castro-Hernández
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Elena Castro-Hernández has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- David Fernandez Rivas
University of Twente
7 shared publications - Antonio Ramos
Universidad de Sevilla
4 shared publications - Jose Manuel Gordillo
Universidad de Sevilla
4 shared publications - Pablo García-Sánchez
Universidad de Sevilla
4 shared publications - Alfonso Miguel Gañán-Calvo
Universidad de Sevilla
2 shared publications - Jean-Christophe Baret
Univ. Bordeaux, CRPP-UMR5031, 115 Avenue du Dr Albert Schweitzer, Pessac, France, 33600
2 shared publications
Latest Publications
- 19 December 2019
- Published by Wiley in Journal of Applied Mechanics
- Vol. 87 (2) , 1-12
Free and Forced Oscillations of Magnetic Liquids Under Low-Gravity Conditions
The sloshing of liquids in microgravity is a relevant problem of applied mechanics with important implications for spacecraft design. A magnetic settling force may be used to avoid the highly non-linear dynamics that characterize these systems. However, this approach is still largely unexplored. This paper presents a quasi-analytical low-gravity sloshing model for magnetic liquids under the action of external inhomogeneous magnetic fields. The problems of free and forced oscillations are solved for axisymmetric geometries and loads by employing a linearized formulation. The model may be of particular interest for the development of magnetic sloshing damping devices in space, whose behavior can be easily predicted and quantified with standard mechanical analogies.
- 19 December 2019
- Published by Wiley in Journal of Applied Mechanics
- Vol. 87 (2) , 1-12
Free and Forced Oscillations of Magnetic Liquids Under Low-Gravity Conditions
The sloshing of liquids in microgravity is a relevant problem of applied mechanics with important implications for spacecraft design. A magnetic settling force may be used to avoid the highly non-linear dynamics that characterize these systems. However, this approach is still largely unexplored. This paper presents a quasi-analytical low-gravity sloshing model for magnetic liquids under the action of external inhomogeneous magnetic fields. The problems of free and forced oscillations are solved for axisymmetric geometries and loads by employing a linearized formulation. The model may be of particular interest for the development of magnetic sloshing damping devices in space, whose behavior can be easily predicted and quantified with standard mechanical analogies.
- 2 January 2019
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 23 (1) , 10
Controllable production of Janus ligaments by AC fields in a flow-focusing junction
- 2 January 2019
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 23 (1) , 10
Controllable production of Janus ligaments by AC fields in a flow-focusing junction
- 20 July 2018
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 22 (8) , 79
Novel swirl flow-focusing microfluidic device for the production of monodisperse microbubbles
- 20 July 2018
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 22 (8) , 79
Novel swirl flow-focusing microfluidic device for the production of monodisperse microbubbles
- Open Access
- 1 January 2018
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 123, 221-232
Evaluation method for process intensification alternatives
- 1 January 2018
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 123, 221-232
Open AccessEvaluation method for process intensification alternatives
- 21 September 2017
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 21 (10) , 1-5
Droplet group production in an AC electro-flow-focusing microdevice
- 21 September 2017
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 21 (10) , 1-5
Droplet group production in an AC electro-flow-focusing microdevice
- 15 June 2016
- Published by AIP Publishing in Biomicrofluidics
- Vol. 10 (4) , 043504
AC electrified jets in a flow-focusing device: Jet length scaling
We use a microfluidic flow-focusing device with integrated electrodes for controlling the production of water-in-oil drops. In a previous work, we reported that very long jets can be formed upon application of AC fields. We now study in detail the appearance of the long jets as a function of the electrical parameters, i.e., water conductivity, signal frequency, and voltage amplitude. For intermediate frequencies, we find a threshold voltage above which the jet length rapidly increases. Interestingly, this abrupt transition vanishes for high frequencies of the signal and the jet length grows smoothly with voltage. For frequencies below a threshold value, we previously reported a transition from a well-behaved uniform jet to highly unstable liquid structures in which axisymmetry is lost rather abruptly. These liquid filaments eventually break into droplets of different sizes. In this work, we characterize this transition with a diagram as a function of voltage and liquid conductivity. The electrical response of the long jets was studied via a distributed element circuit model. The model allows us to estimate the electric potential at the tip of the jet revealing that, for any combination of the electrical parameters, the breakup of the jet occurs at a critical value of this potential. We show that this voltage is around 550 V for our device geometry and choice of flow rates.
- 15 June 2016
- Published by AIP Publishing in Biomicrofluidics
- Vol. 10 (4) , 043504
AC electrified jets in a flow-focusing device: Jet length scaling
We use a microfluidic flow-focusing device with integrated electrodes for controlling the production of water-in-oil drops. In a previous work, we reported that very long jets can be formed upon application of AC fields. We now study in detail the appearance of the long jets as a function of the electrical parameters, i.e., water conductivity, signal frequency, and voltage amplitude. For intermediate frequencies, we find a threshold voltage above which the jet length rapidly increases. Interestingly, this abrupt transition vanishes for high frequencies of the signal and the jet length grows smoothly with voltage. For frequencies below a threshold value, we previously reported a transition from a well-behaved uniform jet to highly unstable liquid structures in which axisymmetry is lost rather abruptly. These liquid filaments eventually break into droplets of different sizes. In this work, we characterize this transition with a diagram as a function of voltage and liquid conductivity. The electrical response of the long jets was studied via a distributed element circuit model. The model allows us to estimate the electric potential at the tip of the jet revealing that, for any combination of the electrical parameters, the breakup of the jet occurs at a critical value of this potential. We show that this voltage is around 550 V for our device geometry and choice of flow rates.
- 29 April 2016
- Published by Wiley
- p. 1-18
Drop Generation in Controlled Fluid Flows
- Open Access
- 4 February 2016
- Published by Wiley in ChemistrySelect
- Vol. 1 (2) , 136-139
Scaled–up sonochemical microreactor with increased efficiency and reproducibility
Bubbles created with ultrasound from artificial microscopic crevices can improve energy efficiency values for the creation of radicals; nevertheless it has been conducted so far only under special laboratory conditions. Limited reproducibility of results and poor energy efficiency are constraints for the sonochemistry and ultrasonics community to scale‐up applied chemical processes. For the first time, using conventional ultrasonic bath technology, the numbering‐up and scale‐up of a microfluidic sonochemical reactor has been achieved. Sonochemical effects such as radical production and sonochemiluminescence were intensified by the modification of the inner walls of a novel Cavitation Intensification Bag. While 25 times bigger than the previous microreactor, a reduction of 22 % in standard deviation and an increase of 45.1 % in efficiency compared to bags without pits were obtained. Mechanical effects accompanying bubble collapse lead to two distinct types of erosion marks observed in the bags.
- 4 February 2016
- Published by Wiley in ChemistrySelect
- Vol. 1 (2) , 136-139
Open AccessScaled–up sonochemical microreactor with increased efficiency and reproducibility
Bubbles created with ultrasound from artificial microscopic crevices can improve energy efficiency values for the creation of radicals; nevertheless it has been conducted so far only under special laboratory conditions. Limited reproducibility of results and poor energy efficiency are constraints for the sonochemistry and ultrasonics community to scale‐up applied chemical processes. For the first time, using conventional ultrasonic bath technology, the numbering‐up and scale‐up of a microfluidic sonochemical reactor has been achieved. Sonochemical effects such as radical production and sonochemiluminescence were intensified by the modification of the inner walls of a novel Cavitation Intensification Bag. While 25 times bigger than the previous microreactor, a reduction of 22 % in standard deviation and an increase of 45.1 % in efficiency compared to bags without pits were obtained. Mechanical effects accompanying bubble collapse lead to two distinct types of erosion marks observed in the bags.
- 2 February 2016
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 20 (2) , 1-8
Study of the geometry in a 3D flow-focusing device
- 2 February 2016
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 20 (2) , 1-8
Study of the geometry in a 3D flow-focusing device
- Open Access
- 3 December 2015
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 656 (1) , 012112
A novel ultrasonic cavitation enhancer
We introduce a Cavitation Intensifying Bag as a versatile tool for acoustic cavitation control. The cavitation activity is spatially controlled by the modification of the inner surface of the bag with patterned pits of microscopic dimensions. We report on different measurements such as the transmission of ultrasound, temperature increase inside the bag during sonication. Several applications of interest to other scientific activities are also demonstrated.
- 3 December 2015
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 656 (1) , 012112
Open AccessA novel ultrasonic cavitation enhancer
We introduce a Cavitation Intensifying Bag as a versatile tool for acoustic cavitation control. The cavitation activity is spatially controlled by the modification of the inner surface of the bag with patterned pits of microscopic dimensions. We report on different measurements such as the transmission of ultrasound, temperature increase inside the bag during sonication. Several applications of interest to other scientific activities are also demonstrated.