Andrew Whyte
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrew Whyte has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Umair Hasan
School of Civil and Mechanical Engineering, Curtin University, Perth, WA 6845, Australia
8 shared publications - Hamad Al Jassmi
United Arab Emirates University
6 shared publications - Aisha Hasan
Emirates Centre for Mobility Research, United Arab Emirates University, Al Ain P.O. Box 15551, United Arab Emirates
3 shared publications Ayedh Alqahtani
Department of Civil Engineering, Curtin University, Perth, Australia
3 shared publications- Dominic Doe Ahiaga-Dagbui
School of Architecture & Built Environment, Deakin University
2 shared publications - Peter E. D. Love
Curtin Univ
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by SCIE Publishing Limited in Marine Energy Research
- Vol. 3 (1) , 10003
Life Cycle Assessment of the Emissions Reduction Potential of Recycled-Carbon-Fibre for Western-Australian Offshore Wind Turbine Blades
SCIEPublish is an international open-access journal publishing service provider run by SCIE Publishing Limited, dedicated to supporting and inspiring scientists or institutions/societies who aspire to publish high-quality journals.
- 1 January 2026
- Published by SCIE Publishing Limited in Marine Energy Research
- Vol. 3 (1) , 10003
Open AccessLife Cycle Assessment of the Emissions Reduction Potential of Recycled-Carbon-Fibre for Western-Australian Offshore Wind Turbine Blades
SCIEPublish is an international open-access journal publishing service provider run by SCIE Publishing Limited, dedicated to supporting and inspiring scientists or institutions/societies who aspire to publish high-quality journals.
- 1 November 2025
- Published by Springer Nature
- p. 41-53
Life-Cycle Cost Analysis (LCCA) of Building Integrated PhotoVoltaic (BIPV) Roof-Cladding Systems in Australia
- 1 November 2025
- Published by Springer Nature
- p. 41-53
Life-Cycle Cost Analysis (LCCA) of Building Integrated PhotoVoltaic (BIPV) Roof-Cladding Systems in Australia
- 1 November 2025
- Published by Springer Nature
- p. 439-450
Life Cycle Assessment (LCA) of Sludge Treatment and Disposal Methods in Regional Western Australia
- 1 November 2025
- Published by Springer Nature
- p. 439-450
Life Cycle Assessment (LCA) of Sludge Treatment and Disposal Methods in Regional Western Australia
- Open Access
Offshore Wind Turbine Key Components’ Life Cycle Cost Analysis (LCCA): Specification Options in Western Australia
Laminated Veneer Lumber (LVL) presents an alternative material for offshore wind turbine towers and blades for an energy sector whose greenhouse gas emissions are substantial. In compliance with AS/NZS 4536, this case study facilitates a specifications’ selection framework that embraces a validated, cost–benefit determination via life cycle cost analyses (LCCA) specification comparisons. A structured consultation with three key Western Australian offshore industry experts, compliant with a standard phenomenological qualitative approach, further facilitates offshore wind turbine (OWT), LCCA cost comparisons between traditional steel and fibreglass components and LVL wooden components. LVL is found to have a higher capital cost but can generate long-term savings of AUD 30,400 per comparable unit less than Traditional OWT specifications, noting a 5% lower LVL operation and maintenance cost. Where decommissioning recycling facilities exist, OWT LVL specification components are encouraged. This work argues that LVL options uptake in Western Australia (WA) is both practicable and whole-cost effective.
Open AccessOffshore Wind Turbine Key Components’ Life Cycle Cost Analysis (LCCA): Specification Options in Western Australia
Laminated Veneer Lumber (LVL) presents an alternative material for offshore wind turbine towers and blades for an energy sector whose greenhouse gas emissions are substantial. In compliance with AS/NZS 4536, this case study facilitates a specifications’ selection framework that embraces a validated, cost–benefit determination via life cycle cost analyses (LCCA) specification comparisons. A structured consultation with three key Western Australian offshore industry experts, compliant with a standard phenomenological qualitative approach, further facilitates offshore wind turbine (OWT), LCCA cost comparisons between traditional steel and fibreglass components and LVL wooden components. LVL is found to have a higher capital cost but can generate long-term savings of AUD 30,400 per comparable unit less than Traditional OWT specifications, noting a 5% lower LVL operation and maintenance cost. Where decommissioning recycling facilities exist, OWT LVL specification components are encouraged. This work argues that LVL options uptake in Western Australia (WA) is both practicable and whole-cost effective.
- Open Access
- 15 February 2025
- Published by Akademia Baru Publishing in Semarak International Journal of Civil and Structural Engineering
- Vol. 4 (1) , 22-30
Sustainable Use of Spent Bleaching Earth as Partial Cement Substitute in Cement Sand Brick
This study investigates a use of spent bleaching earth pozzolanic, byproduct of biodiesel production, as sustainable substitute in the cement mortar. As a waste material, spent bleaching earth pozzolanic present viable solution for enhances construction materials while reducing environmental impact. The study aims to assess spent bleaching earth pozzolanic effectiveness as a partial cement replacement in a cement mortar, focusing on its effect on material properties and structural performance at varying replacement levels of 10%, 20%, 30%, 40%, and 50%. Tests conducted include the sieving analysis, water absorption, and compressive strength. The results indicate Portland limestone cement in 75 µm pan sieve weighed for 69 g, and a spent bleaching earth pozzolanic weighed for 77 g, with respective indicating a potential for improved particle packing. By increasing the spent bleaching earth pozzolanic in Portland limestone cement with river sand for cement sand brick, reduce the water absorption values of 0%, 10%, 20%, 30%, 40%, and 50% spent bleaching earth pozzolanic for 9.8%, 9.6%, 9.4%, 9.2%, 9.1%, and 9% at 28 days. The packing packed of Portland limestone cement, spent bleaching earth pozzolanic, and river sand showed as spent bleaching earth pozzolanic increased, the water demand slightly decreased, resulting in compressive strength values suitable for load-bearing application. Finding suggest spent bleaching earth pozzolanic effective as binder at 20% replacement, providing enhance performance without compromising cement sand brick strength, thus supporting the material’s potential in the eco-friendly construction. This research contributes to the sustainable utilization of the industrial byproducts, proposing spent bleaching earth pozzolanic as viable ingredient in building materials that balances mechanical properties with environmental benefits.
- 15 February 2025
- Published by Akademia Baru Publishing in Semarak International Journal of Civil and Structural Engineering
- Vol. 4 (1) , 22-30
Open AccessSustainable Use of Spent Bleaching Earth as Partial Cement Substitute in Cement Sand Brick
This study investigates a use of spent bleaching earth pozzolanic, byproduct of biodiesel production, as sustainable substitute in the cement mortar. As a waste material, spent bleaching earth pozzolanic present viable solution for enhances construction materials while reducing environmental impact. The study aims to assess spent bleaching earth pozzolanic effectiveness as a partial cement replacement in a cement mortar, focusing on its effect on material properties and structural performance at varying replacement levels of 10%, 20%, 30%, 40%, and 50%. Tests conducted include the sieving analysis, water absorption, and compressive strength. The results indicate Portland limestone cement in 75 µm pan sieve weighed for 69 g, and a spent bleaching earth pozzolanic weighed for 77 g, with respective indicating a potential for improved particle packing. By increasing the spent bleaching earth pozzolanic in Portland limestone cement with river sand for cement sand brick, reduce the water absorption values of 0%, 10%, 20%, 30%, 40%, and 50% spent bleaching earth pozzolanic for 9.8%, 9.6%, 9.4%, 9.2%, 9.1%, and 9% at 28 days. The packing packed of Portland limestone cement, spent bleaching earth pozzolanic, and river sand showed as spent bleaching earth pozzolanic increased, the water demand slightly decreased, resulting in compressive strength values suitable for load-bearing application. Finding suggest spent bleaching earth pozzolanic effective as binder at 20% replacement, providing enhance performance without compromising cement sand brick strength, thus supporting the material’s potential in the eco-friendly construction. This research contributes to the sustainable utilization of the industrial byproducts, proposing spent bleaching earth pozzolanic as viable ingredient in building materials that balances mechanical properties with environmental benefits.
- Open Access
Transit Behaviour and Sociodemographic Interrelation: Enhancing Urban Public-Transport Solutions
Recent years have seen a considerable shift in the focus of public investment agencies from extensive roadway networks to a more planned approach that meets environmental, cost, and social dimensions more aptly. Past research has mainly explored the engineering aspect and cost parameters, while the human or social component is often neglected. This study aims to identify the trip-making behaviour of residents in an urban area towards bus transport network enhancement. Abu Dhabi, the location of study, is heavily dependent upon car travel, creating much congestion, which the local government seeks to address by enhanced public transport. This work examined eight public-transport routes in two zones, with data collected on both weekdays (n = 751) and weekends (n = 769). Multinomial logistic regression models showed that respondents highlighted overcrowded buses and traffic congestion as two of the main hurdles pertinent to urban routes in the bus network influencing their mode choice. Proposals pertinent to the local authority for further consideration need to factor in current low satisfaction with bus transit network coverage, low satisfaction with the quality of bus rides, inhibiting a mode shift from cars/taxis towards buses, cumulative income profiles of public-transport users, with findings that the low-income bracket is already at saturation, and that reducing congestion needs innovative (sociodynamic rather than technical road network) public-transport solutions.
Open AccessTransit Behaviour and Sociodemographic Interrelation: Enhancing Urban Public-Transport Solutions
Recent years have seen a considerable shift in the focus of public investment agencies from extensive roadway networks to a more planned approach that meets environmental, cost, and social dimensions more aptly. Past research has mainly explored the engineering aspect and cost parameters, while the human or social component is often neglected. This study aims to identify the trip-making behaviour of residents in an urban area towards bus transport network enhancement. Abu Dhabi, the location of study, is heavily dependent upon car travel, creating much congestion, which the local government seeks to address by enhanced public transport. This work examined eight public-transport routes in two zones, with data collected on both weekdays (n = 751) and weekends (n = 769). Multinomial logistic regression models showed that respondents highlighted overcrowded buses and traffic congestion as two of the main hurdles pertinent to urban routes in the bus network influencing their mode choice. Proposals pertinent to the local authority for further consideration need to factor in current low satisfaction with bus transit network coverage, low satisfaction with the quality of bus rides, inhibiting a mode shift from cars/taxis towards buses, cumulative income profiles of public-transport users, with findings that the low-income bracket is already at saturation, and that reducing congestion needs innovative (sociodynamic rather than technical road network) public-transport solutions.
- Open Access
- 24 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15657
A Microsimulation Modelling Approach to Quantify Environmental Footprint of Autonomous Buses
In this study a novel microsimulation-based methodology for environmental assessment of urban systems is developed to address the performance of autonomous mass-mobility against conventional approaches. Traffic growth and microsimulation models, calibrated using real data, are utilised to assess four traffic management scenarios: business-as-usual; public bus transport case; public-bus rapid transit (BRT) case; and, a traffic-demand-responsive-autonomous-BRT case, focusing on fuel energy efficiency, headways, fleet control and platooning for lifecycle analysis (2015–2045) of a case study 3.5 km long 5-lane dual-carriageway section. Results showed that both energy consumption and exhaust emission rates depend upon traffic volume and flow rate factors of vehicle speed-time curves; acceleration-deceleration; and braking rate. The results measured over-reliance of private cars utilising fossil fuel that cause congestions and high environmental footprint on urban roads worsen causing excessive travel times. Public transport promotion was found to be an effective and easy-to-implement environmental burden reduction strategy. Results showed significant potential of autonomous mass-mobility systems to reduce environmental footprint of urban traffic, provided adequate mode-shift can be achieved. The study showed utility of microsimulations for energy and emissions assessment, it linked bus network performance assessment with environmental policies and provided empirical models for headway and service frequency comparisons at vehicle levels. The developed traffic fleet operation prediction methodology for long-term policy implications and tracking models for accurate yearly simulation of real-world vehicle operation profiles are applicable for other sustainability-oriented urban traffic management studies.
- 24 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15657
Open AccessA Microsimulation Modelling Approach to Quantify Environmental Footprint of Autonomous Buses
In this study a novel microsimulation-based methodology for environmental assessment of urban systems is developed to address the performance of autonomous mass-mobility against conventional approaches. Traffic growth and microsimulation models, calibrated using real data, are utilised to assess four traffic management scenarios: business-as-usual; public bus transport case; public-bus rapid transit (BRT) case; and, a traffic-demand-responsive-autonomous-BRT case, focusing on fuel energy efficiency, headways, fleet control and platooning for lifecycle analysis (2015–2045) of a case study 3.5 km long 5-lane dual-carriageway section. Results showed that both energy consumption and exhaust emission rates depend upon traffic volume and flow rate factors of vehicle speed-time curves; acceleration-deceleration; and braking rate. The results measured over-reliance of private cars utilising fossil fuel that cause congestions and high environmental footprint on urban roads worsen causing excessive travel times. Public transport promotion was found to be an effective and easy-to-implement environmental burden reduction strategy. Results showed significant potential of autonomous mass-mobility systems to reduce environmental footprint of urban traffic, provided adequate mode-shift can be achieved. The study showed utility of microsimulations for energy and emissions assessment, it linked bus network performance assessment with environmental policies and provided empirical models for headway and service frequency comparisons at vehicle levels. The developed traffic fleet operation prediction methodology for long-term policy implications and tracking models for accurate yearly simulation of real-world vehicle operation profiles are applicable for other sustainability-oriented urban traffic management studies.
- Open Access
Lifecycle Cost Analysis of Recycled Asphalt Pavements: Determining Cost of Recycled Materials for an Urban Highway Section
Growing demand for road infrastructures and accompanying environmental footprint calls for the replacement of pavement materials with recycled options. The complexities in real-world usability are dependent upon project-specific characteristics and are affected by budgetary constraints of local governmental agencies, material applicability, and climatical conditions. This study conducts a comprehensive lifecycle cost analysis (LCCA) of an urban highway section “E10” in the hot Middle Eastern climate of Abu Dhabi, where virgin asphalt usage is dominant, using actual cost data under multiple scenarios and recycled construction waste (RCW) usage across aggregate layers and recycled asphalt pavement (RAP) across wearing, binder, and asphalt base courses. Blast furnace slag as partial cement replacement for road concrete works is also analysed. Impacts across all lifecycle stages from initial earthworks and construction to routine maintenance and operation were compared. Results found that cost of sustainable construction is lower. Cost reduction was highest for RAP and RCW usage, particularly when the usage was accumulated. The optimum cost scenario used 25% RCW in the sub-base, 80% RCW in the unbound base, 25% warm-mix asphalt (WMA) RAP in the asphalt base, 15% warm-mix RAP in the binder and wearing courses, and 65% slag for concrete roadworks and resulted in USD 2.6 million (15%) cost reduction over 30 years from 2015 to 2045.
Open AccessLifecycle Cost Analysis of Recycled Asphalt Pavements: Determining Cost of Recycled Materials for an Urban Highway Section
Growing demand for road infrastructures and accompanying environmental footprint calls for the replacement of pavement materials with recycled options. The complexities in real-world usability are dependent upon project-specific characteristics and are affected by budgetary constraints of local governmental agencies, material applicability, and climatical conditions. This study conducts a comprehensive lifecycle cost analysis (LCCA) of an urban highway section “E10” in the hot Middle Eastern climate of Abu Dhabi, where virgin asphalt usage is dominant, using actual cost data under multiple scenarios and recycled construction waste (RCW) usage across aggregate layers and recycled asphalt pavement (RAP) across wearing, binder, and asphalt base courses. Blast furnace slag as partial cement replacement for road concrete works is also analysed. Impacts across all lifecycle stages from initial earthworks and construction to routine maintenance and operation were compared. Results found that cost of sustainable construction is lower. Cost reduction was highest for RAP and RCW usage, particularly when the usage was accumulated. The optimum cost scenario used 25% RCW in the sub-base, 80% RCW in the unbound base, 25% warm-mix asphalt (WMA) RAP in the asphalt base, 15% warm-mix RAP in the binder and wearing courses, and 65% slag for concrete roadworks and resulted in USD 2.6 million (15%) cost reduction over 30 years from 2015 to 2045.
- Open Access
Lifecycle Analysis of Recycled Asphalt Pavements: Case Study Scenario Analyses of an Urban Highway Section
Roads account for a major part of energy/resource consumption and emission of GHGs, such as CO2, PM, NOx, O3, etc., due to high demand for virgin materials, specifically in developing regions. The applicability of recycled materials, such as recycled asphalt pavement (RAP) and other alternative approaches for, e.g., warm-mix asphalt (WMA), in developed countries is hindered by project-specific constraints and lack of empirical studies in these regions. Lifecycle assessment studies on the usage of these road options from actual projects in the developing countries can aid decision makers choose sustainable material approaches by providing case study examples as guidelines. To that end, this study analyses environmental in/out-flows for a traditional approach and multiple green approaches (RAP and WMA) for a major highway section in Abu Dhabi through a 30-year (2015–2045) lifecycle approach. Roadworks were modelled in SimaPro according to real-world conditions, and the expected burden mitigation in each stage is calculated. Benefits of using optimum RAP-based options and a virgin-material-based WMA case against the baseline virgin material case were also investigated. Results showed benefits of WMA as higher than replacing virgin asphalt with recycled asphalt (25% RAP asphalt base, 15% RAP binder and wearing courses). Land use (19%) and energy consumption (16%) showed the highest reduction, followed by ozone depletion (14%), ionizing radiation (11%), PM (8%), acidification (7%) and global warming potential (6%) across all pavement lifecycle stages and environmental indicators. Similar results were obtained for other scenarios with lesser degrees of reduction, which show the significance of replacing HMA with WMA for real-world projects, specifically in mega road projects in Abu Dhabi and the Middle East towards cutting the significant carbon footprint of asphalt pavements.
Open AccessLifecycle Analysis of Recycled Asphalt Pavements: Case Study Scenario Analyses of an Urban Highway Section
Roads account for a major part of energy/resource consumption and emission of GHGs, such as CO2, PM, NOx, O3, etc., due to high demand for virgin materials, specifically in developing regions. The applicability of recycled materials, such as recycled asphalt pavement (RAP) and other alternative approaches for, e.g., warm-mix asphalt (WMA), in developed countries is hindered by project-specific constraints and lack of empirical studies in these regions. Lifecycle assessment studies on the usage of these road options from actual projects in the developing countries can aid decision makers choose sustainable material approaches by providing case study examples as guidelines. To that end, this study analyses environmental in/out-flows for a traditional approach and multiple green approaches (RAP and WMA) for a major highway section in Abu Dhabi through a 30-year (2015–2045) lifecycle approach. Roadworks were modelled in SimaPro according to real-world conditions, and the expected burden mitigation in each stage is calculated. Benefits of using optimum RAP-based options and a virgin-material-based WMA case against the baseline virgin material case were also investigated. Results showed benefits of WMA as higher than replacing virgin asphalt with recycled asphalt (25% RAP asphalt base, 15% RAP binder and wearing courses). Land use (19%) and energy consumption (16%) showed the highest reduction, followed by ozone depletion (14%), ionizing radiation (11%), PM (8%), acidification (7%) and global warming potential (6%) across all pavement lifecycle stages and environmental indicators. Similar results were obtained for other scenarios with lesser degrees of reduction, which show the significance of replacing HMA with WMA for real-world projects, specifically in mega road projects in Abu Dhabi and the Middle East towards cutting the significant carbon footprint of asphalt pavements.