Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Monika Kwoka has a total of 122 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-Sensitivity Helium Leak Detector Based on a Magnetic Sector Mass Spectrometer with Modified Ion Detection System

    by Pawel Sobczak, Andreas Glenz, Monika Kwoka-Czornik

    High-sensitivity helium leak detection is essential for the safe and efficient operation of modern vacuum and technological systems. This work presents the development and experimental validation of the GLD10 helium leak detector based on a magnetic sector mass spectrometer for industrial leak-testing applications. The detector combines helium mass spectrometric analysis with digital control and monitoring functions, enabling automated operation and integration with industrial vacuum and monitoring systems. Experimental investigations were carried out using calibrated helium reference leaks under controlled vacuum conditions and included comparative measurements with a commercial PHOENIX Quadro helium leak detector. The developed system demonstrated stable operation over a broad range of operating conditions and achieved a practical helium leak detection limit of approximately 1 × 10−10 mbar·L/s. The detector exhibited a response time shorter than 1 s and was designed for operation at inlet pressures up to 15 mbar measured at the inlet port of the aluminum manifold block. Measurements performed near the detection limit demonstrated stable detector response, good repeatability, and effective discrimination between helium leak signals and background noise. Comparison with the commercial reference detector demonstrated comparable measurement performance, while stable background behavior and good signal-to-noise characteristics were observed during low-level helium leak measurements. The obtained results demonstrate that the GLD10 detector is a promising solution for high-sensitivity industrial leak detection applications requiring accurate low-level measurements, continuous operation, and compatibility with automated monitoring environments.

  • Ga2O3 microrods-functionalized In2O3 nanostructures for a low-temperature hydrogen gas sensor

    by Suresh Kumar, Mariusz Robert Florek, Priya Rani, Mukesh Kumar, Satyajit Sahu, Monika Kwoka-Czornik, Mahesh Kumar


  • Synergistic H2S Sensing in Pd-Functionalized In2S3 Flakes

    by Ashok Kumar, Raushan Kumar, Akash Popat Gutal, Chaitanya B. Auti, Amit Kumar, Sumit Kumar, Monika Kwoka, Pradeep Kumar, Manikandan Paranjothy, Mahesh Kumar

    Hydrogen sulfide sensors are censoriously important for environmental monitoring, industrial safety, and biomedical applications due to the highly toxic and corrosive nature of H2S gas. We report indium sulfide (In2S3) flakes were grown via chemical vapor deposition (CVD) and functionalized with palladium (Pd) nanoparticles(NPs) to develop a high-performance chemiresistive H2S gas sensor. The pristine In2S3 flakes have a porous microstructure with abundance of active sites, however the addition of Pd NPs improves the gas sensing response through enhancing charge transfer interactions along with providing catalytic spillover sites. The Pd-functionalized In2S3 sensor demonstrated a increase in respone (1.4-fold) and selectivity towards H2S, attaining a sensing response of approximately 67.60% at 50 ppm concentration at 75 oC. The sensor demonstrated rapid kinetics with response and recovery times of 48 s and 260 s, respectively, and a remarkably low limit of detection (LOD) of 59 ppb. Furthermore, the sensor confirmed high humidity tolerance up to 80% RH and excellent repeatability. Density functional theory (DFT) calculations discovered an 8-fold increase in adsorption energy (-1.51 eV) and significant charge transfer (-0.086 e-) upon Pd decoration, correlating the electronic sensitization of the Schottky barrier to the observed ppb-level sensitivity. With the use of first-principles calculations that explain the underlying sensing process, this work presents a practical strategy to develop efficient H2S gas sensors through the use of CVD-grown sulfide semiconductors with decoration of noble metal nanoparticles.

  • Enhancing NO2 Gas Sensing: The Dual Impact of UV and Thermal Activation on Vertically Aligned Nb-MoS2 for Superior Response and Selectivity

    by Suresh Kumar, Atanu Betal, Ashok Kumar, Atul G. Chakkar, Pradeep Kumar, Monika Kwoka, Satyajit Sahu, Mahesh Kumar

    Nitrogen dioxide (NO2) is considered to be a highly hazardous gas found in combustion engine exhaust, which causes several diseases at a young age. To detect NO2 at room temperature (RT), two-dimensional transition metal dichalcogenides play an essential role because of their greater surface-to-volume ratio. However, their higher limit of detection (LOD), slow response, and incomplete recovery kinetics hinder their use in efficient gas sensors. To mitigate these issues, we fabricate a facile and robust niobium (Nb)-doped molybdenum disulfide (MoS2) sensor using low-pressure chemical vapor deposition on a SiO2/Si substrate. Doping is confirmed through various characterization techniques. As compared to pristine MoS2, three batches of sensors are prepared with different weight percentages of Nb (8, 16, and 24%). Out of these, the 16% Nb-MoS2 sensor gives a greatly enhanced relative response of ∼30% for 500 ppb NO2 at 100 °C with an LOD of 489 ppt. Also, the sensor gives an ultrahigh response of ∼39% (18%) for 50 ppm (500 ppb) NO2 under 0.4 mW/cm2 intensity of UV light and exhibits a lower LOD of 117 ppt at RT. In addition, the 16% Nb-MoS2 sensor shows impressive selectivity toward NO2 against a range of reducing and oxidizing gases, along with exceptional long-term durability and stability. Based on density functional theory calculations, a comprehensive gas sensing mechanism is proposed. The calculations focus on identifying the favorable sites for NO2 adsorption on 16% Nb-MoS2 nanoflakes. This study offers a compelling and practical approach to boosting the efficiency of Nb-MoS2-based NO2 gas sensors.


  • Open Access

    Resistance-driven low power H2S sensors based on MWCNT@CuO heterojunction

    by Sumit Kumar, Rahul Mitra, Suraj Barala, Ashok Kumar, Monika Kwoka, Krishnau Biswas, Mahesh Kumar

    Low power, high sensitivity, and selectivity chemiresistive gas sensors are in urgent demand for hydrogen sulfide (H2S) detection to protect human health and the world's ecosystem. In this study, multiwalled carbon nanotubes (MWCNTs) and copper oxide (CuO) submicrometer size particles’ compositions were utilized to fabricate low-temperature H2S gas sensors, which were prepared using a screen-printing technique on inter-digited patterned SiO2/Si substrates. The heterostructure of MWCNT@CuO was confirmed through high-resolution transmission electron microscopy analysis and x-ray diffraction patterns. The x-ray photoelectron spectroscopy analysis reveals the chemical states, binding energies, and oxygen vacancy (Ov). Brunauer–Emmett–Teller analysis of nitrogen physisorption analysis was conducted on the samples to analyze sensor surface areas and pore size distribution. The as-fabricated MWCNT@CuO sensor shows a relative response (ΔR/R%) of 73% toward 10 ppm H2S at 50 °C temperature in a selective manner, which is 1.6 times higher than that of devices based on bare CuO. The MWCNT@CuO interface modifies the morphology and also constructs a p–p heterojunction. This leads to the reforming of the band structure and results in a low resistance of the matrix, as well as a high chemisorbed oxygen content. The use of metal oxide semiconductors with MWCNTs offers a promising approach for the development of high-performance gas sensors that are energy-efficient.


  • High performance Pt-anchored MoS2 based chemiresistive ascorbic acid sensor

    by Arpita Biswas, Ashok Kumar, Amit Kumar, Monika Kwoka, Gaurav Bassi, Mukesh Kumar, Mahesh Kumar

    Ascorbic acid (AA), known as vitamin C, is a vital bioactive compound that plays a crucial role in several metabolic processes, including the synthesis of collagen and neurotransmitters, the removal of harmful free radicals, and the uptake of iron by cells in the human intestines. As a result, there is an absolute need for a highly selective, sensitive, and economically viable sensing platform for AA detection. Herein, we demonstrate a Pt-decorated MoS2 for efficient detection of an AA biosensor. MoS2 hollow rectangular structures were synthesized using an easy and inexpensive chemical vapor deposition approach to meet the increasing need for a reliable detection platform. The synthesized MoS2 hollow rectangular structures are characterized through field effect scanning electron microscopy (FESEM), energy-dispersive spectroscopy elemental mapping, Raman spectroscopy, and x-ray photoelectron spectroscopy. We fabricate a chemiresistive biosensor based on Pt-decorated MoS2 that measures AA with great precision and high sensitivity. The experiments were designed to evaluate the response of the Pt-decorated MoS2 biosensor in the presence and absence of AA, and selectivity was evaluated for a variety of biomolecules, and it was observed to be very selective towards AA. The Pt-MoS2 device had a higher response of 125% against 1 mM concentration of AA biomolecules, when compared to that of all other devices and 2.2 times higher than that of the pristine MoS2 device. The outcomes of this study demonstrate the efficacy of Pt-decorated MoS2 as a promising material for AA detection. This research contributes to the ongoing efforts to enhance our capabilities in monitoring and detecting AA, fostering advancements in environmental, biomedical, and industrial applications.


  • Quasicrystal Nanosheet/α-Fe2O3 Heterostructure-Based Low Power NO2 Sensors: Experimental and DFT Studies

    by Sumit Kumar, Mirabbos Hojamberdiev, Anyesha Chakraborty, Rahul Mitra, Rajneesh Chaurasiya, Monika Kwoka, Chandra Sekhar Tiwary, Krishanu Biswas, Mahesh Kumar

    Industrial emissions, environmental monitoring, and medical fields have put forward huge demands for high-performance and low power consumption sensors. Two-dimensional quasicrystal (2D QC) nanosheets of metallic multicomponent Al70Co10Fe5Ni10Cu5 have emerged as a promising material for gas sensors due to their excellent catalytic and electronic properties. Herein, we demonstrate highly sensitive and selective NO2 sensors developed by low-cost and scalable fabrication techniques using 2D QC nanosheets and α-Fe2O3 nanoparticles. The sensitivity (ΔR/R%) of the optimal amount of 2D QC nanosheet-loaded α-Fe2O3 sensor was 32%, which is significantly larger about 3.5 times than bare α-Fe2O3 sensors for 1 ppm of NO2 at 150 °C operating temperature. The sensors exhibited p-type conduction, and resistance was reduced when exposed to NO2, an oxidizing gas. The enhanced sensing characteristics are a result of the formation of nanoheterojunctions between 2D QC and α-Fe2O3, which improved the charge transport and provided a large sensing signal. In addition, the heterojunction sensor demonstrated excellent NO2 selectivity over other oxidizing and reducing gases. Furthermore, density functional theory calculation examines the adsorption energy and charge transfer between NO2 molecules on the α-Fe2O3(110) and QC/α-Fe2O3(110) heterostructure surfaces, which coincides well with the experimental results.


  • Open Access

    Photocatalytic degradation of methylene blue at nanostructured ZnO thin films

    by Anna Kulis-Kapuscinska, Monika Kwoka, Michal Adam Borysiewicz, Tomasz Wojciechowski, Nadia Licciardello, Massimo Sgarzi, Gianaurelio Cuniberti

    The photocatalytic degradation of the wastewater dye pollutant methylene blue (MB) at ZnO nanostructured porous thin films, deposited by direct current reactive magnetron sputtering on Si substrates, was studied. It was observed that over 4 photocatalytic cycles (0.3 mg · l−1 MB solution, 540 minUV irradiation), the rate constant k of MB degradation decreased by ∼50%, varying in the range (1.54 ÷ 0.78) · 10–9 (mol·l−1·min−1). For a deeper analysis of the photodegradation mechanism, detailed information on the nanostructured ZnO surface morphology and local surface and subsurface chemistry (nonstoichiometry) were obtained by using scanning electron microscopy (SEM) and x-ray photoelectron spectroscopy (XPS) as complementary analytical methods. The SEM studies revealed that at the surface of the nanostructured ZnO thin films a coral reef structure containing polycrystalline coral dendrites is present, and that, after the photocatalytic experiments, the sizes of individual crystallites increased, varying in the range 43 ÷ 76 nm for the longer axis, and in the range 28 ÷ 58 nm for the shorter axis. In turn, the XPS studies showed a slight non-stoichiometry, mainly defined by the relative [O]/[Zn] concentration of ca. 1.4, whereas [C]/[Zn] was ca. 1.2, both before and after the photocatalytic experiments. This phenomenon was directly related to the presence of superficial ZnO lattice oxygen atoms that can participate in the oxidation of the adsorbed MB molecules, as well as to the presence of surface hydroxyl groups acting as hole-acceptors to produce OH· radicals, which can be responsible for the generation of superoxide ions. In addition, after experiments, the XPS measurements revealed the presence of carboxyl and carbonyl functional groups, ascribable to the oxidation by-products formed during the photodegradation of MB.


  • Open Access

    Flower-like ZnO Nanostructures Local Surface Morphology and Chemistry

    by Monika Kwoka, Elisabetta Comini, Dario Zappa, Jacek Szuber

    This work presents the results of comparative studies using complementary methods, such as scanning electron microscopy (SEM), X-ray photoemission spectroscopy (XPS), and thermal desorption spectroscopy (TDS) to investigate the local surface morphology and chemistry of flower-like ZnO nanostructures synthesized by the thermal oxidation technique on native Si/SiO2 substrates. SEM studies showed that our flower-like ZnO nanostructures contained mostly isolated and irregular morphological low-dimensional forms, seen as rolled-up floss flowers, together with local, elongated, complex stalks similar to Liatris flowers, which contained joined short flosses in the form of nanodendrites. Beyond this, XPS studies showed that these nanostructures exhibited a slight surface nonstoichiometry, mostly related to the existence of oxygen-deficient regions, combined with strong undesired C surface contamination. In addition, the TDS studies showed that these undesired surface contaminations (including mainly C species and hydroxyl groups) are only slightly removed from the surface of our flower-like ZnO nanostructures, causing an expected modification of their nonstoichiometry. All of these effects are of great importance when using our flower-like ZnO nanostructures in gas sensor devices for detecting oxidizing gases because surface contamination leads to an undesired barrier for toxic gas adsorption, and it can additionally be responsible for the uncontrolled sensor aging effect.