MDMohsen Danaie

Mohsen Danaie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohsen Danaie has a total of 315 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Resolving Nanoscale Heterogeneities in Lead Halide Perovskites Through Low‐Dose Concurrent 4D‐STEM‐EDX Mapping

    by Jinseok Ryu, Alexandra A. Sheader, Mohsen Danaie, David G. Hopkinson, Katherine E. MacArthur, Nakita K. Noel, Christopher S. Allen

    Mixed‐cation lead mixed‐halide perovskites are promising materials for applications in photovoltaics; however, it has been suggested that they exhibit instabilities linked to nanoscale heterogeneity. Directly probing the origins of this heterogeneity requires characterization with nanoscale spatial resolution, making transmission electron microscopy (TEM) an essential tool. However, characterizing these materials is challenging due to their extreme sensitivity to electron irradiation. Here, we develop a low‐dose, concurrent methodology using four‐dimensional scanning transmission electron microscopy (4D‐STEM) and energy‐dispersive x‐ray spectroscopy (EDX) in order to map both the chemical and structural architecture of a (FA 0 . 83 Cs 0 . 17 )Pb(I 0 . 8 Br 0 . 2 ) 3 perovskite film without inducing damage. Our correlative analysis reveals a complex mosaic of coexisting crystal structures in this state‐of‐the‐art LHP film. We establish a direct link between local chemical composition and crystal structure, showing that the formation of undesirable, photovoltaically inactive hexagonal polytypes is predominantly driven by local deficiencies in the stabilizing cesium cation. These findings provide crucial insight into one of the fundamental origins of structural instabilities in mixed composition perovskite thin‐films, suggesting that achieving long‐term device performance requires the development of fabrication routes that ensure compositional homogeneity at the nanoscale.

  • Open Access

    Functionalized MOFs for Subnanometric Control of Pd Speciation for Selective Hydrogenation of Butadiene

    by Donato Decarolis, Sahra Ahmed, James King, Alin-Marin Elena, Linda Zhang, Jeff Armstrong, Ines Lezcano-Gonzalez, Mohsen Danaie, Michael Hirscher, Simone Meloni, et al.

    Metal–organic frameworks have been intensively investigated for their ability to effectively control the growth and surface chemistry of nanosized guests, with their pores acting as templates and potentially providing anchoring sites. Since the speciation, as determined by the geometry and surface chemistry of hydride-forming metals, such as Pd, under particular conditions (T, p), is controlled by their size at and beyond the nanoscale, metal–organic frameworks are a prospective matrix for speciation or phase selection. This is of relevance because the role and characteristics of the phases in hydrogenation reactions involving hydride-forming Pd catalysts are open questions. In particular, it is a matter of debate which palladium phase is the most active and most selective, as they often occur simultaneously under catalytic conditions. For the first time, our thorough investigation, including operando XAFS and computer simulations, demonstrates that by embedding Pd nanoclusters, ≤1 nm in diameter, in the pores of the NH2–UiO-66 metal–organic framework, the speciation of subnanometric Pd particles can be controlled, such that the active particles only exist in their metallic state under reaction conditions; in fact, the Pd–H2 mixture only affords surface-bound hydrogen atoms. This control of Pd speciation consequently enables the direct probing of the phase activity and selectivity in the model reaction of 1,3-butadiene hydrogenation to butenes, wherein it showed no deactivation and improved selectivity compared to conventionally prepared catalytic systems. This result shows that the metallic phase can be stabilized through subnanometric size control and that it is more selective and less prone to overhydrogenating the butadiene reactant to butane, resulting in a purer product.


  • Open Access

    Direct Imaging Reveals the Atomic Mechanism of Active‐Site Formation in Nanoclusters for Hydrogen Production

    by Emerson C. Kohlrausch, Christopher Leist, Gazi N. Aliev, Mohsen Danaie, Matthew Young, Madasamy Thangamuthu, Yifan Chen, William J. Cull, Wolfgang Theis, Ute Kaiser, et al.

    Understanding how catalytically active sites emerge and evolve under working conditions is a fundamental challenge that limits the rational design of heterogeneous catalysts. Here, we directly visualize the transformation between alloyed PtNi and phase‐separated Pt‐NiO nanoclusters during hydrogen evolution. Using in situ low‐voltage aberration‐corrected electron microscopy, with the electron beam serving as both the stimulus and probe, we track the formation of active sites under low‐water‐vapor conditions. PtNi nanoclusters were assembled with controlled mixing of the atoms, resulting in two distinct configurational entropy states. Under reaction conditions, the transformation of bimetallic nanoclusters shifts from an entropically stabilized alloy to an enthalpically favored phase‐separated configuration, controlled by oxygen availability and by a critical nucleus size. The atomic dynamics observed in real space correlate directly with catalytic performance, where the low‐entropy Pt‐NiO state achieves a record hydrogen evolution mass activity of 11.1 A/mg Pt due to a high density of interfacial sites that promote water dissociation on NiO and efficient hydrogen adsorption on Pt atoms.

  • Atomic-resolution imaging of gold species at organic liquid-solid interfaces

    by Sam Sullivan-Allsop, Nick Clark, Wendong Wang, Rongsheng Cai, William Thornley, David G. Hopkinson, James G. McHugh, Ben Davies, Samuel Pattisson, Nicholas F. Dummer, et al.

    The structure and dynamics of adsorbed atoms (adatoms) at solid-liquid interfaces determine the performance of advanced catalysts, electrochemical devices, molecular separation technologies, and metal extraction from waste streams. However, in situ investigations of atomically dispersed metals in various chemical environments have been prevented by insufficient imaging resolution and solvent incompatibility. In this study, we combined a specimen design that provides atomic resolution in liquid-phase electron microscopy with deep learning–enabled analysis to explore the interactions between gold adatoms, graphite support, and the solvent collectively. We tracked the locations of >10 6 graphite-supported gold adatoms, dimers, and larger clusters in five solvents. Although their initial atomic dispersion was determined by the solvent polarity, fast drying kinetics at low temperature was required for optimizing catalytic performance.


  • Open Access

    Defect-assisted refinement of nanoscale alpha in titanium alloys

    by Abigail K. Ackerman, Benjamin H. Savitzky, Colin Ophus, Mohsen Danaie, Phani Karamched, David Dye

    Titanium alloys owe their superior fatigue performance to a lack of extrinsic nucleation sites for cracking, but this also results in difficulty in developing fine, 10 nm scale precipitates to provide fatigue strength. Conventional Ti alloys used for large components such as jet engine discs must instead develop a hierarchical microstructure through successive waves of nucleation. Here we show that intermediate temperature deformation can result in the nucleation of nanoscale hcp α precipitates in between large μ m thick α plates, and observe the precipitation of these in situ in the TEM using 4D-Scanning Transmission Electron Microscopy (4D-STEM) alongside the accompanying partially-relaxed transformation strain fields. This results in an improvement in the high cycle fatigue strength of the material by 95 MPa, to around 920 MPa in un-notched high cycle fatigue at 10 6 cycles, or 200 MJ kg −1 , which is among the highest of all structural materials.


  • Open Access

    A Combined Neutron and Synchrotron X-ray Scattering Study of a MgAl-Layered Double Oxide

    by Frederick Z.T. Yang, Theodosios Famprikis, Joerg Neuefeind, Mohsen Danaie, Claire T. Coulthard, Chunping Chen, Dermot O’hAre

    Owing to their vast chemical and structural flexibility, layered double hydroxides (LDHs) are among some of the most promising materials for many catalytic applications. Thermal decomposition below 700 °C leads to the formation of a complex semiamorphous mixed metal oxide (LDO). In this study, the product of calcination of aqueous miscible organic solvent-treated AMO-[Mg0.70Al0.30(OH)2](CO3)0.15·yH2O·zEtOH at 600 °C (AMO-Mg2.33Al LDO) has been investigated using a synergistic combination of high-resolution synchrotron X-ray and neutron scattering techniques, as well as high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), solid-state NMR (ssNMR), and thermogravimetric analysis coupled with mass spectrometry (TGA-MS). The local and extended structure of AMO-Mg2.33Al LDO has been modeled by reciprocal and real space X-ray and neutron scattering analyses and is consistent with a modified rock salt structure consisting of octahedrally coordinated layers containing a small number of vacancies and the tetrahedrally coordinated Al3+ sites in contrast to previous reports.


  • Open Access

    Sulfur‐bearing serpentine in carbonaceous chondrites

    by N. Topping, J. C. Bridges, L. J. Hicks, L. Petera, C. S. Allen, J. Ryu, D. G. Hopkinson, M. Danaie, L. Blase, F. M. Willcocks, et al.

    A correlative multi‐technique approach, including electron microscopy and X‐ray synchrotron work, has been used to obtain both structural and compositional information of a sulfur‐bearing serpentine identified in several carbonaceous chondrites (Winchcombe CM2, Aguas Zarcas CM2, Ivuna CI, and Orgueil CI), and in Ryugu samples returned by the Hayabusa2 mission. S‐K edge X‐ray absorption spectroscopy was used to determine the oxidation state of sulfur in the serpentine in all samples except Ryugu. The abundance of this phase varies across these samples, with the largest amount in Winchcombe; ~12 vol% of phyllosilicates are identified as sulfur‐bearing serpentine characterized by ~10 wt% SO 3 equivalent. HRTEM studies reveal a d 001 ‐spacing range of 0.64–0.70 nm across all sulfur‐bearing serpentine sites, averaging 0.68 nm, characteristic of serpentine. Sulfur‐serpentine has variable S 6+ /∑S total values and different sulfur species dependent on specimen type, with CM sulfur‐bearing serpentine having values of 0.1–0.2 and S 2− as the dominant valency, and CIs having values of 0.9–1.0 with S 6+ as the dominant valency. We suggest sulfur is structurally incorporated into serpentine as SH − partially replacing OH − , and trapped as SO 4 2− ions, with an approximate mineral formula of (Mg Fe 2+ Fe 3+ Al) 2‐3 (Si Al) 2 O 5 (OH) 5‐6 (HS − ) 1‐2 (SO 4 ) 2− 0.1‐0.7 . We conclude that much of the material identified in previous studies of carbonaceous chondrites as TCI‐like or PCPs could be sulfur‐bearing serpentine. The relatively high abundance of sulfur‐bearing serpentine suggests that incorporation of sulfur into this phase was a significant part of the S‐cycle in the early Solar System.

  • Open Access

    Automation of Simultaneous 4DSTEM-EDX Acquisition and Data Analysis for Beam-sensitive Materials

    by Jinseok Ryu, Alexandra A. Sheader, Mohsen Danaie, David G. Hopkinson, Katherine E. MacArthur, Nakita K. Noel, Christopher S. Allen

    The electron beam for scanning transmission electron microscopy (STEM) provides rich information about the atomic structure and chemical composition of materials from micron to atomic scale. However, the electron probe can also damage the materials of interest, as the high-energy electrons are often focused on very small sample regions [ 1]. These effects limit the quality of information which can be extracted from experiments on beam-sensitive materials, such as Li-ion battery materials and metal halide perovskites used in solar cell devices [ 2]. However, with the increasing interest in these materials to address environmental and societal concerns, a detailed understanding of their microstructure and chemical composition at high spatial resolution is needed to improve their performance and stability. For these materials, the correlation between processing and nanoscale structure-property relationships has been difficult to firmly establish. As shown in Fig. 1a- 1c, phase change or amorphisation in beam-sensitive materials can be easily caused by a focused electron probe. Fortunately, this problem can be solved through combined scanning electron nano-diffraction (SEND) [3] and energy dispersive X-ray spectroscopy (EDX) with low electron dose conditions, providing nanoscale crystallographic and chemical information from the specimen. However, the signal-to-noise (SNR) of the EDX data is very poor - with just a few counts in any individual scan prohibiting comprehensive materials characterisation (Fig. 1d). To address this, we perform automated SEND-EDX data acquisition under low dose conditions utilising our automated data analysis workflow. By communicating with two different modalities, i.e., Aztec ®; Oxford Instruments and MerlinEM; Quantum Detectors, and using our Python-based software, many SEND-EDX data pairs were simultaneously acquired from a metal halide perovskite. Fig. 1 (a) Virtual annular dark-field image of a metal halide perovskite; (b, c) sum of diffraction patterns for the green square area of 2×2 pixels in (a) for the 1 st and the 7 th frames, respectively; after multiple scans with the dwell time of 1 millisecond for the same area, some diffraction peaks, marked with white circles, disappeared or were weakened due to the beam damage; (d) sum of energy dispersive X-ray spectra for a spectrum image of 128×127 pixels

  • Open Access

    On the use of clustering workflows for automated microstructure segmentation of analytical STEM datasets

    by Zhiquan Kho, Andy Bridger, Keith Butler, Ercin C. Duran, Mohsen Danaie, Alexander S. Eggeman

    This study considers the issue of automated segmentation of scanning transmission electron microscopy (STEM) datasets using unsupervised machine learning approaches. To this end, a systematic comparison of two clustering workflows that had been established in previous literature was performed on two distinct material systems—an experimentally acquired Co2FeSi Heusler alloy and a simulated Au-matrix and Al2Cu precipitate. The cluster outputs were evaluated using a variety of unsupervised clustering metrics measuring separation and cohesion. It was found that the cluster output of a variational autoencoder (VAE) performed better compared to a more conventional latent transformation via Uniform Manifold Approximation & Projection (UMAP) on 4D-STEM data alone. However, the UMAP workflow applied to merged 4D-STEM and STEM-energy dispersive x-ray (STEM-EDX) data produced the best cluster output overall, indicating that the correlated information provides beneficial constraints to the latent space. A potential general workflow for analyzing merged datasets to identify structural-composition changes across different material systems is proposed.


  • Open Access

    Nanostructure and Photovoltaic Potential of Plasmonic Nanofibrous Active Layers

    by Ryan M. Schofield, Barbara M. Maciejewska, Karim A. Elmestekawy, Jack M. Woolley, George. T. Tebbutt, Mohsen Danaie, Christopher S. Allen, Laura M. Herz, Hazel E. Assender, Nicole Grobert

    Nanofibrous active layers offer hierarchical control over molecular structure, and the size and distribution of electron donor:acceptor domains, beyond conventional organic photovoltaic architectures. This structure is created by forming donor pathways via electrospinning nanofibers of semiconducting polymer, then infiltrating with an electron acceptor. Electrospinning induces chain and crystallite alignment, resulting in enhanced light‐harvesting and charge transport. Here, the charge transport capabilities are predicted, and charge separation and dynamics are evaluated in these active layers, to assess their photovoltaic potential. Through X‐ray and electron diffraction, the fiber nanostructure is elucidated, with uniaxial elongation of the electrospinning jet aligning the polymer backbones within crystallites orthogonal to the fiber axis, and amorphous chains parallel. It is revealed that this structure forms when anisotropic crystallites, pre‐assembled in solution, become oriented along the fiber– a configuration with high charge transport potential. Competitive dissociation of excitons formed in the photoactive nanofibers is recorded, with 95%+ photoluminescence quenching upon electron acceptor introduction. Transient absorption studies reveal that silver nanoparticle addition to the fibers improves charge generation and/or lifetimes. 1 ns post‐excitation, the plasmonic architecture contains 45% more polarons, per exciton formed, than the bulk heterojunction. Therefore, enhanced exciton populations may be successfully translated into additional charge carriers.